Hola he sido un fanático tuyo desde siempre en el programa Joyas sobre ruedas .. ojala algún día pueda conocerte o vengas aquí a Colombia sería un honor ... ojala tuvieras la versión del canal en español sería un éxito en Latinoamérica eres muy admirado. Dios te bendiga
I'm in the same boat. I wish the "clip show" videos were labeled so that I knew in advance. I'm getting frustrated and trying not to give up on clicking Edd's videos hoping for new content.
Ah so it's not just me. I was pretty sure i saw Edd work on this chassis before. It's a shame there's these reruns of episodes. Hopefully he'll be back soon with new videos.
Edd has got a normal 9-5 job with warranty wise. I assume couldn't make this channel work and it is now defunct... Months since last update and even that was regurgitated content. Shame but a mans got to make a living.
I’ve watched you, since the beginning of wheeler dealers You are an old soul with a modern twist. Traditional old world craftsmanship and pride. Blended with taking advantage of all modern technology. You are very kind in describing wheeler dealer. I think most of the old fans were like me. I fast forwarded through Mike displaying all the negative stereotypes about car salesman. I just didn’t care for his personality. He got worse as the years went on. Frankly, I thought he was very very jealous of you. Mike did not have the skills you had. When it came to your work, I watched it in great detail and often re-watched it two or three times. It’s crazy because you were the show. Mike’s bit was frankly not that valuable. Well your work was priceless. I like your RUclips channel even more. Please keep posting material.
So in case no one has seen it, Edd has apparently gone corporate. He's working for Warrentywise as their arbiter for claims. I'm guessing YT wasn't bringing in enough money. Guess we may never see the end of the Range Rover project.
Well, like everybody else he needs to make a living, and YT didn't exactly provide him with the means to do that. Just look at the numbers of views on his videos, they are not exactly overwhelming for a channel with almost 1 mill. subscribers. He wouldn't be able to make a decent living out of those numbers.
I have so many memories of watching you on television with my dad when i was a kid. thank you so much for all the hard work and great entertainment through the years. You're the reason i got into cars and mechanics
Here is the truth :o) I raced this chassis type for two decades and I have been inside all of it. I even ran a winch line down the inside of it! The best fix is to cut the bottom plate off and replace it with 3mm. Why so extreme you might ask? Well, that isn’t rust on the steel, that rust was the chassis, it’s gone now, especially on the inside. I have done this on my 1991 Ford transit box van and it works ace. If this is going to be used off road it needs a strong impact layer and the 3mm will be a stout bit of metal to attach a belly plate. * I’m glad you went with a full chassis strip, it will make a very nice classic car to have fun with :D
Edd, believe it or not you are going to be the main reason for restorations on any TV or RUclips network...yes you guess it right "bigger than Velocity or discovery".. You may not realise but being your fan supporter from India you should you you are a celebrity here... stay humble and you are the best ❤
Edd, you're the man! Since im an American i would never spend money on this project. You had to do de-rusting on the chaasis at least twice. Y'all live in a salt climate. You brits always overenginerd everything. Ever heard of galvanizing?
😠You know Edd I don't like reruns on television look! I love your RUclips videos your the best.Q Are you making all the video ahead of time so you can take a break this summer.
So looking through the video on Social Blade, Edd has not made a new video since Christmas last year! There been no new content at all from Christmas until February which is when the ‘repeats’ started being published. I don’t think the channel has gone for more than about 3 days without reposting old videos. Someone’s busy but it’s pretty obvious it isn’t Edd! The Christmas videos didn’t do that well and every video since has been poorly received. If it was possible to make new content it would happen so there’s a big fat ? at the moment and absolutely no sign of these repeats slowing down
@@ccsocal768 my last reply was deleted for some reason, possibly links I posted.. Edd was on someone's youtube channel looking fit and well and speaking as though there's loads of projects coming up. On John Guest's website there is an article from January 2023 explaining a partnership with Edd which is when he went missing
Edd, I almost didn't realise that it's been TWO months since we've heard from you. We're begging you, or whoever runs this channel, PLEASE just give us a brief update of what's going on. Even if you tell us you've decided to leave RUclips altogether forever, that's fine. No explanation needed. Most of us just want to know you're alright.
@@bikecommuter24 Same thing happened over on the DIY Creators YT page. Glenn just up and disappeared a year ago. No word from anyone. Maybe we are living in a Black Mirror episode here.
like the channel but the last 10 or so episodes have pretty much just been at best re-esits of older stuff. is there any hint when something new will be coming?
That is honestly one of the best videos I've ever watched, thanks Ed and Paul. I've learnt loads, loved the musical montage (and fireworks!) and you've- more importantly - fixed stuff. keep doing what you do!
One day the Bad Obsession boys will realise that nobody is going to pay their silly random of 100 quid and they'll just have to let Edd go. Either that or they're teaching Edd the skill of pacing from their experience with Binky.
I know it would be hellishly loud but try using an air chisel with a bull nosed chisel bit in it and run it up and down the chassis legs to get most of the rust out before it goes for pickling then galvanizing. Plus if you have to cut sections out of the side of the chassis legs due to being pitting and holed you can clean out all the big chunks of flaked off rust.
The presenting skills are great. I noticed the Hydrovane when Plasma cutter was mentioned. I did not know the name was still being used as it goes back to the days of Binks and then Binks Bullows making stuff for motorbikes, compressors and the like.
Hi Edd. I'm going to unsubscribe, I'm really sorry, but you can't treat your audience like this, it's rude and we simply don't deserve it. You amassed a million subscribers, most you tube content creators would give body parts for that and be bringing out content weekly or more often. I'm sorry you're not on TV any more, but you walked away from that, and it looks like you've walked away from this audience too. I wish you the best for your future, I hope you find whatever it is that you're looking for and I hope you and your family are well. Keep safe.
I unsubscribed months ago, only back to check for new content. Nothing since Christmas, this is a new record even for Edd. I declare this a dead channel
As a multi millionaire I wouldn't care what you've got to say , nice holiday in the Bahamas , Dubai , Hawaii , I know him he's worked on my car in the 90,s his father was a caretaker at my junior school so as a master engineer why are you worried , I'm not
Just saying Ed but I always undo the filler before the drain just in case the filler doesn’t want to undo. If it doesn’t then you can’t easily refill and you’re a bit stuffed! Anyhow, loving the videos. 👍😀
Having read a few of the comments I find it strange that people seem to feel that Ed owes them something and that he should let them into his life. I really feel this highlights the vicarious nature of these platforms and in my humble opinion it isn’t healthy. Having said that, I was quite interested in these videos initially, but then there are seemingly months of nothing. I assumed that I was missing something because I don’t engage in anything other than RUclips, but from the comments it seems not. If I see something of interest I’ll watch it, but these long breaks simply interrupt any momentum so I’m not at all bought in. I find the owner of the Range Rover rather odd and a bit rude (I sense there is an attempt at humour but I’m not really feeling it). When I start watching something I’m usually sure I’ve seen it before. It’s all a bit of a waste of time. I think Ed is great and he gave me the confidence to start (and finish) my own restoration projects, but this latest series feels like a massive missed opportunity. Clearly he has other things pulling on his time. Good luck Ed, but probably best to give it a rest until you have time to generate regular content.
I can't be the only one who is not very interested in Range Rovers ? Instead of 20 videos about 1 car I would rather see 20 videos about 20 different cars.
Former Wheeler Dealers master mechanic Edd China is Warrantywise's new expert arbiter. The TV personality, presenter, motoring specialist and inventor has taken over from Quentin Willson to help shape and refine the warranty packages offered by the Car Dealer Power 2023 trophy-winning company.13 July 2023
Would love to see a project with Edd, Paul and Sreten et al. Love these guys. My absolute fantasy would be an old Honda Legend, rare car yes, but my dads favourite love
I used to enjoy the new videos each Friday and look forward to them being released, but now another week passes, another Friday comes and still no new (or even old) content. I really hope Edd is ok but its such a shame we’ve not been told anything. Has anyone contacted any of the sponsors to see if they know what’s happening? I realise that people do need breaks and that good content takes time to make but it’s been about 7 months now with nothing new and very little communications. Fingers crossed new content will appear at some point or if not then at least some sort of announcement or video about the closure of this workshop project.
Former Wheeler Dealers master mechanic Edd China is Warrantywise's new expert arbiter. The TV personality, presenter, motoring specialist and inventor has taken over from Quentin Willson to help shape and refine the warranty packages offered by the Car Dealer Power 2023 trophy-winning company.13 July 2023
makes me think that rather overweight dude from wheeler dealers was right ed just didn't want to do the work so he must of given up I don't know what has happened so forgive me if there is information that would explain the absence but they don't update so probs dead channel
We all like watching Ed’s channel or you all wouldn’t be here but I’m getting a bit frustrated that there’s not any interaction with the channel and it’s subscribers. I think I’ve got maybe 1 more video then I’m out of here
I find this is quite common with people with TV industry history transitioning to an online/social-media platform. At least Edd doesn't use an intro anymore. It makes zero sense when the viewer selected the video. Don't need a reminder of the choice they just made.
What do you want, a cookie? He makes awesome garage content, that's what real men come to his channel for. If you're looking for a reach around try another channel.
The whole show was fun when it started but seriously lacking momentum and imagination now. Not enough content and the cheesy one minute TikTok’s are not holding me. Also, haven’t we seen axel rebuilds before?
@@tjewett1967 "real men" want "real content" not repeats. What a pointless thing to say. Reach around? You give out way to much information about yourself.
Watching at 46:34 or so.. well one it looks like a bunch of fun doing that (maybe wet but still super satisfying getting all that 40 year old dirt and grime out) but I was thinking - maybe not with all the pressure, necessarily, but - It would be a nice treat to use that little attachment you have to get into all the tiny orifices and instead of WATER, once you're all clean using OIL - like sticky oil that could preserve inside those frame rails for eternity (or 20 years at least maybe with a freshening up every once in a while! ) I mean we kind of do the same thing, I live in the North East in the States and they definitely use salt on the roads in winter, and it just eats undercarriages alive. Man that would really be sweet to do to all my vehicles!
Would it not be better to have it dipped in acid to remove the rust inside the chassis, if it's not 100% clean the zinc will not adhere to the metal and galvanising will be a waste of time..??
Sell more t shirts merchandise retro cool over the years ( with reruns) must be some cool designs when with Mike hold out your hand (or is that auto Alex ps didn’t win the 04 Skoda)
Did you miss part 3 of the Range Rover series? Watch it here: ruclips.net/video/rjGC-qMCsKo/видео.html
Ed the steel plate you are using looks thicker than 2.5mm!!
Are you ever coming back to RUclips? Or is your business plan to keep rolling out reruns and never actually finish the RangeRover?
Given up on this as well?
Hola he sido un fanático tuyo desde siempre en el programa Joyas sobre ruedas .. ojala algún día pueda conocerte o vengas aquí a Colombia sería un honor ... ojala tuvieras la versión del canal en español sería un éxito en Latinoamérica eres muy admirado. Dios te bendiga
Hey Edd, will you be making any more videos
with al these Deja-Vu episodes I'm afraid I'll never see how it will end with the range rover because I won't bother to look anymore....
I'm in the same boat. I wish the "clip show" videos were labeled so that I knew in advance. I'm getting frustrated and trying not to give up on clicking Edd's videos hoping for new content.
Ah so it's not just me. I was pretty sure i saw Edd work on this chassis before. It's a shame there's these reruns of episodes. Hopefully he'll be back soon with new videos.
@@destructionnl8165 Nope, same here unfortunately :|
Yeh, I gave up ages ago, thought I'd have a quick look to see something new, but no. I'm done! won't be looking again
But he sure is hawking a lot of sponsored products on Facebook and Twitter now. Did Edd have a meltdown? 🫠
Edd has got a normal 9-5 job with warranty wise. I assume couldn't make this channel work and it is now defunct... Months since last update and even that was regurgitated content. Shame but a mans got to make a living.
The reason we love this man is because he always gives us positive energy
I guess new material is job for another day (year)
Looks like it wasn't profitable enough keep the channel going ?
I’ve watched you, since the beginning of wheeler dealers
You are an old soul with a modern twist. Traditional old world craftsmanship and pride. Blended with taking advantage of all modern technology.
You are very kind in describing wheeler dealer. I think most of the old fans were like me. I fast forwarded through Mike displaying all the negative stereotypes about car salesman. I just didn’t care for his personality. He got worse as the years went on. Frankly, I thought he was very very jealous of you. Mike did not have the skills you had. When it came to your work, I watched it in great detail and often re-watched it two or three times.
It’s crazy because you were the show. Mike’s bit was frankly not that valuable. Well your work was priceless.
I like your RUclips channel even more. Please keep posting material.
🤔 When are you gonna come back with new videos
So in case no one has seen it, Edd has apparently gone corporate. He's working for Warrentywise as their arbiter for claims. I'm guessing YT wasn't bringing in enough money. Guess we may never see the end of the Range Rover project.
Well, like everybody else he needs to make a living, and YT didn't exactly provide him with the means to do that. Just look at the numbers of views on his videos, they are not exactly overwhelming for a channel with almost 1 mill. subscribers. He wouldn't be able to make a decent living out of those numbers.
Guess all the car crushed
Still no sign of new content we should all wear are where’s Edd T-shirt 😂😂😂😂😂😂
Popped back just to see what’s happening …… nothing … awol
Has Edd been tinkering with the Flux Capacitor on Doc brown’s De Lorean and somehow got him self trapped in a space time continuum ?
When will edd do new episodes, its been 6mo now, all we get rerun compilations…
Superb show as usual.
I have so many memories of watching you on television with my dad when i was a kid. thank you so much for all the hard work and great entertainment through the years. You're the reason i got into cars and mechanics
Looking forward to your return, Edd.
Don’t forget. Not too long to wait for this year’s Henley event!
Here is the truth :o) I raced this chassis type for two decades and I have been inside all of it. I even ran a winch line down the inside of it! The best fix is to cut the bottom plate off and replace it with 3mm. Why so extreme you might ask? Well, that isn’t rust on the steel, that rust was the chassis, it’s gone now, especially on the inside. I have done this on my 1991 Ford transit box van and it works ace. If this is going to be used off road it needs a strong impact layer and the 3mm will be a stout bit of metal to attach a belly plate. * I’m glad you went with a full chassis strip, it will make a very nice classic car to have fun with :D
That internally running winch line sounds pretty trick!
Why no explanation now 970 thousand subscribers understand how Mike Brewer felt when he was left high and dry. 😂😂😂😂😂
Edd, believe it or not you are going to be the main reason for restorations on any TV or RUclips network...yes you guess it right "bigger than Velocity or discovery".. You may not realise but being your fan supporter from India you should you you are a celebrity here... stay humble and you are the best ❤
Edd, you're the man! Since im an American i would never spend money on this project. You had to do de-rusting on the chaasis at least twice. Y'all live in a salt climate. You brits always overenginerd everything. Ever heard of galvanizing?
This is why i allways thought that Ed is not excellent mecanic! First, i will clean every part, and than work on it!
Save The Chassis! This is much more in-depth than the old TV show 👍☕🫖
I've seen this years ago
Edd, we're you at?
😠You know Edd I don't like reruns on television look! I love your RUclips videos your the best.Q Are you making all the video ahead of time so you can take a break this summer.
Love your videos edd your really talented ❤❤❤❤❤❤
Great review would be nice for a update on when you are coming back with new material great mechanic❤
He'll be back soon. Making new episodes costs time! :)
Thanks ❤️
Guess there’s no new content any more ? A real shame . Where is Edd China ?
So looking through the video on Social Blade, Edd has not made a new video since Christmas last year!
There been no new content at all from Christmas until February which is when the ‘repeats’ started being published. I don’t think the channel has gone for more than about 3 days without reposting old videos. Someone’s busy but it’s pretty obvious it isn’t Edd!
The Christmas videos didn’t do that well and every video since has been poorly received. If it was possible to make new content it would happen so there’s a big fat ? at the moment and absolutely no sign of these repeats slowing down
Yup, something is wrong. These shows are not that great anymore and it seems that he does not care about posting. I unsubscribed.
@@ccsocal768 my last reply was deleted for some reason, possibly links I posted.. Edd was on someone's youtube channel looking fit and well and speaking as though there's loads of projects coming up. On John Guest's website there is an article from January 2023 explaining a partnership with Edd which is when he went missing
Edd, I almost didn't realise that it's been TWO months since we've heard from you.
We're begging you, or whoever runs this channel, PLEASE just give us a brief update of what's going on. Even if you tell us you've decided to leave RUclips altogether forever, that's fine. No explanation needed. Most of us just want to know you're alright.
Try 6 months in reality
@@copperheadviper7904 or more🤔🤔🤔
last tweet was on June 6th was a retweet and he is wearing a Where's Edd T-shirt.
@@bikecommuter24 Same thing happened over on the DIY Creators YT page. Glenn just up and disappeared a year ago. No word from anyone. Maybe we are living in a Black Mirror episode here.
Hear Hear.
✌️
like the channel but the last 10 or so episodes have pretty much just been at best re-esits of older stuff. is there any hint when something new will be coming?
Where's edd?
What has happened. Only old stuff????
What happened to the Friday videos we used to get, all of the ones we get now are repeats what's going on
Has edd china's youtube been taken over by Dave?
Off you trot, Pa Larkin.
@@skylined5534 he just misses Mike B 🤣🤣🤣👍
Daves a channel on its own!
I am wondering if he got a new show which is in the filming stage and part of the contract is he can't make videos or even talk about it?
Love these tec videos “TWAT IT WITH A HAMMER “ ..
Any new videos coming
That is honestly one of the best videos I've ever watched, thanks Ed and Paul. I've learnt loads, loved the musical montage (and fireworks!) and you've- more importantly - fixed stuff.
keep doing what you do!
I've got the feeling that I've seen this before ?
nearly a million subscribers and complete disregard for them...classic old tv way of thinking
Guess Mike was right 🤔🤔🤔
Land Rover work is a labor of love. Keep up the good work.
Edd just commenting on your latest vid coz it's the only way to get in touch, hope you're OK and i/we really miss you.❤
Love the videos edd but we need to see some new content of the Range Rover or possibly how the mini is going on rallying ❤
left us in the lurch to shill for warranty wise
Unsubscribed some weeks ago and just checked back to see if theres any new content. Sadly not.
Subscriber count is dropping for the same reason.
lol same!
One day the Bad Obsession boys will realise that nobody is going to pay their silly random of 100 quid and they'll just have to let Edd go. Either that or they're teaching Edd the skill of pacing from their experience with Binky.
i see Edd is still in lala land oh well i guess its adiós then.
I know it would be hellishly loud but try using an air chisel with a bull nosed chisel bit in it and run it up and down the chassis legs to get most of the rust out before it goes for pickling then galvanizing.
Plus if you have to cut sections out of the side of the chassis legs due to being pitting and holed you can clean out all the big chunks of flaked off rust.
Has edd given up RUclips????
The presenting skills are great. I noticed the Hydrovane when Plasma cutter was mentioned. I did not know the name was still being used as it goes back to the days of Binks and then Binks Bullows making stuff for motorbikes, compressors and the like.
Very nice work!!!! Well explained.
Hope to see you soon!!
Thanks again
Lost 30.000 subs 😂 learned how RUclips works the hard way can't just treat it like TV
He's lost maybe 1k subs, where you get 30 k from.
@@turquoisecat761 he had 1 million at one point now 969k
He has a new job: Car dealer magazine July 2023 'Edd China takes over as expert arbiter at Warrantywise'
Hi Edd. I'm going to unsubscribe, I'm really sorry, but you can't treat your audience like this, it's rude and we simply don't deserve it. You amassed a million subscribers, most you tube content creators would give body parts for that and be bringing out content weekly or more often. I'm sorry you're not on TV any more, but you walked away from that, and it looks like you've walked away from this audience too. I wish you the best for your future, I hope you find whatever it is that you're looking for and I hope you and your family are well. Keep safe.
I think that little man is addicted to a good cup of tea. LOL
I unsubscribed months ago, only back to check for new content. Nothing since Christmas, this is a new record even for Edd. I declare this a dead channel
As a multi millionaire I wouldn't care what you've got to say , nice holiday in the Bahamas , Dubai , Hawaii , I know him he's worked on my car in the 90,s his father was a caretaker at my junior school so as a master engineer why are you worried , I'm not
Brilliant! Thank you Edd China for sharing this video. Greetings from Madang, Papua New Guinea!
Just saying Ed but I always undo the filler before the drain just in case the filler doesn’t want to undo. If it doesn’t then you can’t easily refill and you’re a bit stuffed! Anyhow, loving the videos. 👍😀
True! I had a moment on an IB5 'box where I drained it and couldn't get the filler plug undone initially!
Having read a few of the comments I find it strange that people seem to feel that Ed owes them something and that he should let them into his life. I really feel this highlights the vicarious nature of these platforms and in my humble opinion it isn’t healthy. Having said that, I was quite interested in these videos initially, but then there are seemingly months of nothing. I assumed that I was missing something because I don’t engage in anything other than RUclips, but from the comments it seems not. If I see something of interest I’ll watch it, but these long breaks simply interrupt any momentum so I’m not at all bought in. I find the owner of the Range Rover rather odd and a bit rude (I sense there is an attempt at humour but I’m not really feeling it). When I start watching something I’m usually sure I’ve seen it before. It’s all a bit of a waste of time. I think Ed is great and he gave me the confidence to start (and finish) my own restoration projects, but this latest series feels like a massive missed opportunity. Clearly he has other things pulling on his time. Good luck Ed, but probably best to give it a rest until you have time to generate regular content.
Brilliant. Some lovely engineering, and some amazing filming. Good on you all, and thank you.
Great video ...🙂👍
I can't be the only one who is not very interested in Range Rovers ? Instead of 20 videos about 1 car I would rather see 20 videos about 20 different cars.
Ed Where are you get lost I want to see what happeaned to that Range Rover Restoration Projects ?
Edd is either busy or lazy??
Too bad there are no news on Edd's whereabouts. I really miss him and his wonderful videos. Hope his is just fine
I'm hoping he is up to something really great that we will get to see at some point
Former Wheeler Dealers master mechanic Edd China is Warrantywise's new expert arbiter. The TV personality, presenter, motoring specialist and inventor has taken over from Quentin Willson to help shape and refine the warranty packages offered by the Car Dealer Power 2023 trophy-winning company.13 July 2023
reluctantly unsubscribed. see you next time edd.
Edd when will the next episode be on here. I really want to see the range rover finished
Grande Edd!
Saluti dall'Italia
Angelo
Would love to see a project with Edd, Paul and Sreten et al. Love these guys. My absolute fantasy would be an old Honda Legend, rare car yes, but my dads favourite love
Great episode. Looking forwards to the next instalment.
I guess he ran out of money to keep making these. He's been appearing at exhibitions and doing other commercial stuff.
I used to enjoy the new videos each Friday and look forward to them being released, but now another week passes, another Friday comes and still no new (or even old) content. I really hope Edd is ok but its such a shame we’ve not been told anything. Has anyone contacted any of the sponsors to see if they know what’s happening? I realise that people do need breaks and that good content takes time to make but it’s been about 7 months now with nothing new and very little communications. Fingers crossed new content will appear at some point or if not then at least some sort of announcement or video about the closure of this workshop project.
Former Wheeler Dealers master mechanic Edd China is Warrantywise's new expert arbiter. The TV personality, presenter, motoring specialist and inventor has taken over from Quentin Willson to help shape and refine the warranty packages offered by the Car Dealer Power 2023 trophy-winning company.13 July 2023
Top Top Top!
Love your video’s Ed!
Hvl.
Edd what are you doing?
I LIKE HOW ED WORKS VERY SMART
Magister Edd!! Bye from Italy 🇮🇪🇮🇪
makes me think that rather overweight dude from wheeler dealers was right ed just didn't want to do the work so he must of given up I don't know what has happened so forgive me if there is information that would explain the absence but they don't update so probs dead channel
Good stuff. But 2000ltrs works out to £14,800 . Bit above most pockets when it comes to cleaning something this big
Mike Brewer for the WIN
We all like watching Ed’s channel or you all wouldn’t be here but I’m getting a bit frustrated that there’s not any interaction with the channel and it’s subscribers. I think I’ve got maybe 1 more video then I’m out of here
I find this is quite common with people with TV industry history transitioning to an online/social-media platform.
At least Edd doesn't use an intro anymore. It makes zero sense when the viewer selected the video. Don't need a reminder of the choice they just made.
What do you want, a cookie? He makes awesome garage content, that's what real men come to his channel for. If you're looking for a reach around try another channel.
The whole show was fun when it started but seriously lacking momentum and imagination now. Not enough content and the cheesy one minute TikTok’s are not holding me. Also, haven’t we seen axel rebuilds before?
@@tjewett1967 "real men" want "real content" not repeats.
What a pointless thing to say.
Reach around? You give out way to much information about yourself.
@@simon1968abbott
Who's this Axel bloke and what did he rebuild?
What’s lurking inside the chassis? The same thing that was lurking in there a year ago… change the channel
Дорогой Человек, как мы постарели!!! Спасибо что я смотрел твои работы!!!
ENOUGH WITH THE REPEATS ALREADY!
Any Morgan's at the auction?
Watching at 46:34 or so.. well one it looks like a bunch of fun doing that (maybe wet but still super satisfying getting all that 40 year old dirt and grime out) but I was thinking - maybe not with all the pressure, necessarily, but - It would be a nice treat to use that little attachment you have to get into all the tiny orifices and instead of WATER, once you're all clean using OIL - like sticky oil that could preserve inside those frame rails for eternity (or 20 years at least maybe with a freshening up every once in a while! ) I mean we kind of do the same thing, I live in the North East in the States and they definitely use salt on the roads in winter, and it just eats undercarriages alive. Man that would really be sweet to do to all my vehicles!
When are we going to get the new episodes of Edd China’s Workshop instead of the repeats
I think is called a radius arm!
What is going on with the weird voice at the ending?
Wasn’t that a Pontiac GTO in bright Orange?
with all the effort and labour and equipment it would have been if not cheaper but the same price to get a new frame.
What’s happened to Paul Edd,? The chemistry between both of you was really excellent and I always made a point to watch your videos without fail
He's there! Just too small to get in shot!
Would it not be better to have it dipped in acid to remove the rust inside the chassis, if it's not 100% clean the zinc will not adhere to the metal and galvanising will be a waste of time..??
Been here before. Are you getting near new content or not
You're so hard done to.
Makes Yu a bean head!!
Abi mike ile barışın🥺🥺🥺🥺
I used a flexi drain cleaner to pressure wash the inside of my chassis
FFS. Let us see some new content rather than hash ups of old videos.
Is it true that you have been recording with the the Car S.O.S team? 🤔
he made a brief cameo in one episode
More repost nonsense. Why can’t you just let us know so we know if we should unsubscribe or what? This is not the way to run a channel.
You know how to run your mouth brod^ 😁
I have had enough I am giving Ed a miss.
Sell more t shirts merchandise retro cool over the years ( with reruns) must be some cool designs when with Mike hold out your hand (or is that auto Alex ps didn’t win the 04 Skoda)