Toyota Tundra Oil Change Step by Step instructions
HTML-код
- Опубликовано: 5 сен 2020
- In this video I will show you every step to change your own oil on your Tundra. I will tell you how you can do it yourself for around $35 all while using premium oil and filter.
Please make sure to check our my new video that I just dropped on changing the air and cabin air filters. This you can do yourself and save $50-100 in just 10 minutes. 
Авто/Мото
You are a brave man for wearing a white T-shirt during an oil change!
Anything to make the wife mad. 😂
I'm still getting used to doing my Tundra oil changes. I use your video "All the time!" Just to make sure I haven't forgotten anything. Thank you
Thank you so much. That is a huge compliment. I have another/revised video coming soon on this oil change. The company that makes the tool to remove the canister has a new and improved tool. It comes with some other things too. I will be doing and unboxing and demonstration of the tools. I will also have a 2nd set for a giveaway. Be looking out for that video on my car channel.
Not sure if you'll ever even see this comment but I jus really wanted to say THANK YOU! This video came in so handy and it helped me save so much money. So again, jus wanted to say THANKS!
Thanks so much Fernando. I answer every comment. I'm still just small enough that I can keep up with that. If I ever miss one it is because I didn't get notification of it. Which does happen from time to time. I am so glad it was helpful. This is one of my most popular videos. Despite it being almost 2 years old I still get 200-300 views a day on it. I really appreciate the kind comment. I have more Tundra content too. If you go to my channel page you will see Playlists. I have one in there for Tundra. Maybe you will see something else of interest to you. What I can remember off the top of my head is remote start install and tailgate extender. Anyway, thanks again. I really appreciate the kinds comments.
Very helpful. Took your time explaining everything. Good camera work too. Thank you.
Thank you so much for the kind comments Gipstetz. Really appreciate it. Please subscribe if you have not. Just did a remote start video for this same Tundra. Super easy to do yourself and saves hundreds of dollars. Thanks again!
Just wanted to let you know that this video was great. The step by step help me get my oil change in my Tundra. Thank
Very welcome Manuel. I am about to do a few more videos on filter changes on Tundra's. I'm gonna do an air filter which is quite simple and the cabin air filter. I don't know about that. I will have to figure out where it is first. LOL. I hope you will subscribe sir. I try to bring very practical content. Thanks so much Manuel.
Very helpful video. Much better than a couple others I watched. Thank you
Very glad it was helpful. I have more Tundra content on the channel. I hope it is helpful to you. Thanks so much bbadoni.
Helped a lot. I just bought a 2018 Toyota Tundra TSS off road and I've already ordered the same oil you used in the video a week ago should be getting it soon. Anyway I wasn't sure how to do a oil change on the Tundra just knew it was a little different as far as the filter. I know what to do now. Good stuff 👍🏽
Yeah, I have changed oil and MANY cars but this one is a little unique. Glad it was helpful. I have more Tundra content. Hope you find something else that might be of interest. Please subscribe if you have not already. I would really appreciate that. Thank you sir.
@@DadsGarageDIY subscribed I'll check out the other Tundra content. Never too old to learn 🤙🏽
@@Gotme_bowed_up I’m proof of that. Lol. Thank you for subscribing!
Good video, it probably saved me from making a mess in my garage. I had not thought about the fact that this truck holds oil. My old oil drain pan would have overflowed. So I went and bought a new one before I started., The video does not mention removing the skid pad to access the oil drain plug. Which was necessary on my truck. But maybe that is only required on 4 wheel drives
Thanks Bill. Glad it helped. Yeah, no skid plate on mine. I am guessing that is a 4x4 thing. I have had a lot of comments about that too. Seems like it is a bit of a pain. I have more tundra content and more coming. Hope you will subscribe. Thank you sir.
Absolutely awesome!! The past few times I’ve taken it to my local Toyota dealership and when I went ti do it today all the skid plate was held in by was one bolt that was completely stripped and 3 more were broken off inside the truck. Absolutely unbelievable can’t believe they would let that go at Toyota
Thank you!
Crazy how unqualified to change oil many of these places are.
Good job. 6th video on the subject I came to, and you're the only one that did it right. That is, unless others want oil all over them by not using the drain valve. You do not need to remove the skid plate. If you do it's a real pain in the butt to reposition it. Remove the 10 & 12 MM bolts, and just lower its back with its hooks still in the core support. Ensure it's secure for the taske, SHARP edges. You can support the bottom if you like. Get yourself a container with a handle on it to drain the filter. I have a 32 Oz container, works perfect. A 1.1/6" socket on the filter remover makes removing/installing the filter easy.
Thanks Tony. I appreciate it. I have heard the skid plate is a real pain. So many have commented that you need to remove it to do the oil change and they are asking about it. But I am guessing that they only put it on the 4X4. Mine is a TSS Offroad but not 4WD. Bought it new and no skip plate. Again I really appreciate you Tony. I have other Tundra content here and hope you will subscribe and I hope to hear from you again.
Thank you so much that is very helpful now I can enjoy changing oil by myself in my truck thanks again!
So glad that was helpful. I hope you have subscribed. I have more Tundra content and more to come very soon. I appreciate the kind comments Martin.
Great video on how to change the oil. I’m going to change the oil on my 2017 Tundra 4.6L tomorrow morning on the 1st day of 2022. Have a happy New Year.
Thanks so much Jaime. Hope it is helpful. Please check out my other Tundra content. Please subscribe if you have not already. I really appreciate it.
Good job " Dad's Gerage".
...also a good idea, while you are under your vehicle to take a look at things... On my last oil/filter change I happened to notice a minor coolent leak..
( great video)
Thanks John. I really appreciate that. Thanks for watching. Hope you will subscribe and check out some other content. I also have other Tundra content. Not a ton because nothing breaks on a Tundra. But, have some other content on them. Thanks again John.
Best oil change video... will be using this for my first Sequoia oil change.
Thanks
Thank you so much. Very glad it was helpful. Please subscribe if you have not already. I would really appreciate that.
Great video. Thanks for taking the time to explain everything.
Very welcome Johnny. Hope it was helpful. Please subscribe if you have not already. I have more Tundra content. Thank you sir! Oh and I see AR in your name. Have a little AR stuff too.
Thankyou. This will be my first oil change job on a Toyota.
Awesome! Hope this will help. I have changed oil on MANY in my life. But, this one is sure different from the rest. Not hard. Just different. I appreciate your comments.
Thank you, It helped a lot for my first oil change.
Glad it helped Robert. I hope you will subscribe if you have not already. I have more Tundra content and more to come. I really appreciate it!
Thank you so much for this video it's excelent very helpful .Im ready for my next oil change👍
Great to hear Juan. It’s not hard. Just not like we are used to. I also have other Tundra videos (adding remote start and others) please subscribe and check them out. I appreciate you sir.
Thanks a lot, first time I had to use a special oil filter wrench, it doesn’t look so bad. A thorough video by a knowledgeable guy, great job!
Thank you so much Gene. Really appreciate the kind comments. It is not hard. Just a little different from a "regular" oil change. I have more Tundra content. Hope you will be kind enough to subscribe to my channel. Thank you sir!
Very helpful. Makes me more confident. Thanks a lot
Very welcome Owen. Please help me out by subscribing. Really helps me out. I have more Tundra content as well. Thanks in advance.
Great vid - thanks for posting - good camera work too.
Thanks for the nice comments Stunt Driver. Really appreciate it.
When the Toyota parts mgr sold me the filter he asked if I’d ever done an oil change on my Tundra and I said no but was aware that the filter was different than the old canister type. He said the new kind are usually difficult to remove but to not blame the service tech for over tightening it on the last oil change. He said these cartridge filter bases tighten on their own due to the expansion and contraction of the engine etc. He also advised getting a good wrench. The $10 Auto Zone wrenches are crap he said. So I bought the Motive 2320 like yours and it worked great…but yep, that filter housing was on there good and tight.
I love the Motive and 100% agree don't buy one of the junkers. Appreciate the comment Dan.
You sir are very intelligent about your oil change intervals
Thank you. I think so. LOL
Thanks so much for the comment.
Great in depth video. Thank you.
May I suggest in investing in a valvomax oil drain system to eliminate oil spills. It works great!
Thank you George. Please check out my other Tundra content. I will look into the valvomax. Not sure what it is but I’m going to find out. I would appreciate you subscribing if you have not already. Thank you so much.
Great video. Have a 2021 tundra and honestly it has the worst dipstick for checking the oil level. Readings are all over the damn place. It’s got a kink in the oil tube which throws off readings since it smears coming up. I found the best way to check is letting it sit flat overnight and then checking level. I change my oil every 4K miles haha I only put on about 10k miles a year so o figure I’d change the oil twice a year not bad
Thank you very much. Yeah, seeing the oil level when new is rather difficult. I have to check it several times before I am sure the level is correct. I have more Tundra content if you would like to check it out. Also if you have not subscribed I really would appreciate it if you would. Thanks Tundras!
Awesome video and very detailed. Thank again
Thank you so much for the kind comments. I appreciate you Tundra!
The Toyota filters have tightening specs on the box and it's good to follow them. It's kinda important that the canister be tighter than the smaller plug. If the smaller plug is over tightened, the next time you try to remove it, the canister will come loose first = Not fun.
Great insight Jim. Thanks so much!
yah, like my effin dealer did last time i had it done... and when i mean last time, i mean the last time they will be given the right to touch my truck.
Mine has always come off that way, not a problem though.
I just cracked the filter open a few turns, and it drained that way no problem then just carefully fully removed. Easy. Less steps..lol
Just had that issue with my 2020 little plug was so dam tight an the whole thing came off had to use a little heat to get the bitch off Toyota dealer did my last oil change very in happy with what they did
Well done. Very clear descriptions and camera work.
Thank you very much Cabby. If not subscribed I would appreciate it. I have more Tundra content and more to come. Thanks so much.
Already subbed post-comment. Thanks. Looking forward to your future content.
@@cabbys Thanks Cabby.
Congratulations on choosing the best oil filter cap wrench for this application.
Best price on oil is Costco's Kirkland brand. 10 quarts for $25. It is full synthetic.
Viewers who have a torque wrench may appreciate the specs.
Oil pan drainplug = 40 N•m (30 ft.lbs)
Oil filter cap = 25 N•m (18 ft.lbs)
Oil filter cap drainbolt = 12.5 N•m (9 ft.lbs.)
Half way between the add oil mark and the full mark is more than half a quart. If I'm correct there is 1.8 quarts difference between those marks.
I agree on the cap wrench for sure. Nicest one I have seen. Thanks for the input on the oil. Another option. Thank you Jack!
I just ordered the same wrench online while watching this video.
Jack, you have a lot of info for people to use there, but let me help out the readers a little bit. Kirkland full synthetic oil is not even close to being the quality of Mobil 1. Readers, open up your pocket book and buy the good stuff.
Kirkland Oil sold by Costco is produced by Warren Distribution which specializes in receiving used motor oils, then filters the used oil to take all contaminants out. The Dollar stores sell most of their products.
Mobil 1 is hands down a better brand compared to Kirkland .
Jack thank you for your input though.
That was great! Thanks so much that's a big help.
Thanks Steve. Really glad it helped! I have other Tundra content as well. If you click on my channel page and go to playlists you will see I have one for Tundra. That may help you navigate. I have the tailgate extender and remote start install videos there and maybe a few more. I would appreciate you subscribing if you have not already. I appreciate your support.
Best video I have found, thank you!
Very welcome Smitty. Have more Tundra content on the channel and more to come. Much appreciated sir.
Great video, very thorough, mine has the skid plate, little more work.
Thank you. Glad it was helpful. Yeah, I have heard the skid plate can be a pain. Thanks so much.
Worked perfect on my 07 tundra....thanx
Awesome to hear Dennis!
Coat both o rings with oil for easier removal next time plus coating the smaller ring will help it stick to the canister or buy an adapter to use spin on filters
Great stuff! Thank you Danny.
Going to start doing my own oil changes again …. Even the Toyota deals can’t do oil changes/basic maintenance….so many times I’ve open the hood to find air cleaner not closed correctly or over tightened filters and drain plugs
Yeah, it's terrible. And for me the dealer would be the only other one I would trust. The quick change places will strip your plugs, put helicoils in and so on. Then you get stuck with buying the oil pan. I run a fleet of trucks and we get that all the time from those places. Good call. I am just about to get back under this Tundra next weekend and the Camry and change oil in both. Good hearing from you. Hope to hear from you again in some other videos.
Great video i just bought a tundra 2015 thanks
Congratulations. Great truck. I have several more videos on the Tundra. I hope you find more valuable videos. I look forward to hearing from you.
Great informative video!! Thank you
Thank you so much Bam. Glad it was helpful. Please subscribe if you have not already. I have more Tundra content and more to come. Thank you in advance.
That a good truck I never realized how good it is even though I haven’t been in one but it’s good looking one just from the trdpro I think that what they are called bc my 11th grade coach has the same one
Yeah, those Tundra's are awesome. Great quality. Many of them documented over 1million miles. Take care of them a little and they will last forever.
Nice job. Thx for posting.
Thank you Phil. I really appreciate it. Would appreciate a subscribe too if you don't mind (if you haven't already). Did one a week ago on adding remote start to the Tundra. Thank you sir.
Great video, Thanks DAD!!
Very welcome Kevin. I have a lot more content on the Tundra and maybe some other stuff that may be helpful. I hope you will subscribe if you have not already. Much appreciated Kevin.
Thanks for the video.
I have to order my oil filter thing on amazon.
You’re welcome! Glad to do it. Please subscribe if you have not. I have more tundra content and more to come.
Great video! Thank you.
I appreciate the kind comment. Thank you for saying. Please subscribe if you have not. I would really appreciate that.
Thanks I have a 21 tundra and after cutting a oil filter access hole in the skid plate . I drained the oil and I just ordered a fumoto oil valve for the drain plug
To better manage the drain into a five gallon jug vs my pan. While the Toyota filter is fine..the amsoil filter element flows oil better
From reviews on line yes it is much more expensive.. Master Toyota Mechanic “car care nut” recommends to change the oil every 5000 miles on Toyotas…Toyota recommends a lot of things regarding maintenance intervals that I believe are not in the best interest of the owners..change fluids sooner than later
Very welcome sir. All comments agreed. I appreciate the comment. Please subscribe. I have more Tundra content and more coming.
I just bought a 4.6 2017 my oil filter was bent to shit and my oil filter holder didn’t have a stem like yours is that standard or do I need to replace ? Thanks this video helped a bunch man
So very glad it helped. When you say stem are you talking about the holy thing that attaches to the cartridge cap that the filter slides onto?
Your spot on changing your oil at 5k miles on a turbo car I would Change it every 4K miles.....never stick to what the manufacturer tells you to...
Thanks Night Storm! I appreciate the input!
full synthetic and double oil volume over a other brand truck means 10k is totally fine. The additive pack also has plenty of buffers to last well over 1 year of humidity cycles. The engineers oci are proven. If you doubt, send out an oil sample for testing.
for what it is worth, have a friend with a corolla with only highway miles. he drives about 300 miles per work day. he just had his timing belt let loose. he changes with full synthetic at 15,000 to 20,000 miles. The motor had 670,000 miles on it. The rest of the car is nice enough he is putting a used motor in it.
Can't argue that. I'm just old. I still think 100k and a car is worn out. LOL
Toyota's are stout! We still only have 36k on this one. It will live longer than we will. 🤣
very helpful . Thank you
So glad to hear. Thank you so much! I have more Tundra content. Please check it out. I would appreciate if you would subscribe if you have not already. Thank you so much!
Great video, however, my 2020 Tundra manual says that halfway between the two dots on the dipstick is full. Top dot indicates half a quart overfull. The engine does consume a small amount of oil as it is zero weight, so probably not a huge deal, but just figured I’d mention it.
Love it. I only read instructions when I get in trouble. 😂. Thanks for the kind words and the great information!
Kirkland Signature 0w-20 full synthetic is good stuff also. SN+rated. 10quarts at around $25 total. Have 3 Toyota vehicles running the oil with zero issues
Thanks for the great info Eric!
Great video
Thank you so much. I really appreciate that. I have more Tundra content. Maybe you will find something else helpful. Thanks again. Please help me out and subscribe if you have not already. Thanks so much.
Thanks for your video’s. I was always reluctant to change my own oil while my vehicle was under warranty. I was worried that if something happened to the engine they would blame me even though I had receipt’s and records. What are your thoughts
Unless they can prove you did someone negligent they would have a very tough time denying a warranty claim. For a while I had the thought that I would have the dealer change the oil (under warranty or not) because if I ever did make any mistake or if there was a defective oil filter or something or for instance the drain plug leaked or something then I was on the hook. And I thought the little extra I was paying them was kind of insurance. Because if they made the mistake they would pay. But, for me it became more about the time to not only drive down there but then sit there. I finally asked myself "what are you doing? You have been changing oil for many years." So, I listened to myself and decided to save the time and money and just get back to doing them myself. Not to mention (to your point in the other video) what are they putting in your engine??? We both know it is something super cheap out of a 55-gallon barrel. Maybe it is up to spec. But, we really don't know. If I pour it out of a bottle I know what's going in. The car I drive we trade off every 1-3 years. But, in the case of this Tundra we will have it for 10+. Anyway, sorry I wrote so much.
I am a new subscriber and love your content and detail. After reading further down in the comments I see yours is a 2WD and can see that you have the smaller engine shield (not skid plate) which you clarified in comments toward the front by the bumper that the plastic tabs on the bumper cover screw into the small engine shield. I have searched over and over and called dealerships on skid plates because my 2017 model 2wd that I bought USED didn't even come with the smaller engine shield that I can see clearly in your video. After finding out the toyota part #514100c030 and entering that into EBAY, I clearly see it is the same small engine shield you have on your truck. (very nice footage )
Does this smaller engine shield cover the oil filter housing and lines in the front of the truck or are they still exposed ?
Have you installed a larger skid plate or anything yet?
After much research etc... I appreciate your channel and any additional information you have
Hi Steve. Thank you so much for the kind comments. I have quite a bit more Tundra content and I have more coming soon. Let me crawl under there and take a look to see if I can get you that info. It is 14 degrees here today and I'm not getting anywhere near the concrete. LOL. I will get under there in the next few days though and get that info for you. I really appreciate you sir.
You should buy the Toyota screw on funnel from motiv tools. Makes filling Toyotas simple
I have seen that. I haven't gotten it yet. I'm a tool junkie so you never know when it will be gotten. But, I have gotten by with the "transmission" funnel so far. Thanks Chris!
This is the third video I've watched on this oil change, but the first one I've seen that "gizmo" used and it looks helpful. What is the name of it, or what should I search for?
I assume you are referring to the oil filter housing wrench. Here is the link www.amazon.com/gp/product/B00XTAGHU0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 this is the new style. They claim it's better. Haven't used it so not sure. Let me know how it works.
Excellent video Sir!
Thank you so much. Glad it was helpful. I have more Tundra content. If you go to my page you can find it in the Tundra playlist.
@@DadsGarageDIY Will definitely check it out, thank you.
@@imacrazy6872 Thanks so much. I really appreciate the support.
Nice video. I suggest acquiring a torque wrench. I was surprised to not see a skid plate.
Thank you Scott. Hope it was helpful. Yeah, I have had a lot of comments about some having skid plates. They have said it is a pain. I really appreciate sir. I have more Tundra content. If you look at my playlists you will find one for Tundra. Thanks again!
Excellent video. Does your tundra not have skid plates? Im thinking about leaving mine off after I take it off for oil change.
No skid plate on this one. Maybe on the 4x4 models? Not sure.
Leaving it off or finding an easier one to install. What a righteous pain in the butt
Have you tried pulling the dipstick out a few inches to get the oil to go in the engine a little better? And thanks for the video.
That can help but in this Tundra you can only use that small tip funnel so there is a big air gap there still. Great advise and great hearing from you Danny.
What about the skid pan reinstalling is the worse part about the oil change lining it backup!!!!!!!
great video
Thanks. I really appreciate it! I appreciate your comment and you watching.
Good job. Your truck is very mice
Thank you. Have a revised video coming soon on the car channel. New tools have been released. I will be reviewing and I will have a giveaway on a set too. Thanks for watching and I hope you subscribe both channels.
Wish you had links to the parts you mention. Thanks for the video!
I have a new video coming. Just got a new sponsorship with the tool company that makes the cap wrench. They have a new improved design and some other really cool tools for the Tundra. I will not only be demonstrating but they have also donated a kit for giveaway. Stay tuned to my car channel for that video and giveaway. Dads Garage (car channel)
Good job
Thank you!
I liked the Las part, the reset part, but, how much oil did you put in it?
I’m in a noisy place, so I couldn’t hear you well!
Hi Ronny. The owners manual calls for 8.5qts. I always put 8 and check it. Typically 8 gets me to full. But, if not you can top it off a bit with the other 1/2 quart.
SOME VERY HELPFUL INFO: *****you do not have to remove the plug to change the oil filter/ just unscrew the housing and have a oil tray under it, its a bit messy but in my case the plug was to tight to remove without a big wrench holding the housing, which I could not do because the previous owner had cut a 6 inch hole into the skid plate and made a ingenious removable cover for easy access.
Very true. If your filter came with the little drain nozzle you can use it when removing the plug and it will be less messy but you are so right. It does not have to be removed. Thanks for the comments bonnyclubber. Really appreciate it!
I hope you will subscribe. I do some other Tundra content and would love to have your input. Thanks again.
Thankyou....blessings
You too! Hope to hear back from you again. Please let me know if you have any comments or questions.
Look into the TRD oil filter for next time it does cost more but a lot better quality then standard one
I will look into that! Thanks for the information! Much appreciated!
Never have understood why people will buy expensive oil and change it every 10k miles.. Buy good oil and change it often! Your not going to save money by cutting corners on how often you change your oil. I agree 100% with ya
Thank you Rocky. Couldn't have said it better! Please subscribe and thumbs up if you have not. I appreciate it buddy.
Do you just not use the skid plate.
Good vid with detailed instruction. Thanks.
Glad it was helpful. I have more Tundra content and more on the way. Stay tuned. Please subscribe if you have not already. Thank you so much!
They sell the oil funnel that you can screw where the oil cap goes at Amazon “Funnel |Compatible with Select Toyota/Lexus/Scion | No-Spill Tool Screws Directly INTO Filler | Fast & Easy Oil Changes/Filter with No Mess”
I have seen those. I am about due an oil change. I'm gonna grab one before next oil change. Which one did you get?
If you use a high quality filter and good synthetic oil and drive less than 10,000 miles a year, you can definitely change it once a year (unless you tow/haul a lot). Many driveway mechanics go WAY overboard with oil changes.
I would agree that can be done. Toyota says it is fine. But, I like to do mine more often. Even at 5k it is pretty darn dirty. Like to get that out and fresh in. But, I get your point. Thanks D LG.
Amd the Toyota master tech on the Car Care Nut RUclips channel says to change the oil at the first 1,000 miles and then every 5,000 miles or 6 months. Which ever comes first. I'll be using that with our 2021 Tundra we bought yesterday.
@@JetSkiBuyFixPlaySellChannel I am very familiar with the Car Care Nut channel and I'm a big fan. But he's still a mechanic who makes his living doing oil changes (and much more, of course) so there's a conflict of interest there.
I'm not saying 10,000 mile OCIs always make sense, but for highway cruisers in mild climates, for example, it definitely makes sense. I'm just saying decide based on your actual driving habits, not just an arbitrary desire to do more oil changes "just in case" it might help. It winds up being a waste of natural resources, a waste of money and a waste of time.
i dunno man... lots of views on this, but i run a LOT of short trips... like only a few miles, and i idle frequently, hot/cold like ive seen 30 degree C swings in 48 hours... i go 5k mi / 8k km. that is what the owners manual recommends also
@@666dynomax Agreed. If you do mostly short trips, every 6 months or 5000 mi makes sense. I drive roughly 25000 highway miles per year and I change oil every 8000-9000 mi, 3x per year. Works great for me.
is your tundra a 2WD ?
Does it have a skid plate that you have to remove for oil changes?
If it does could you do a video of installing it after oil change ?
Hi Steve. It is 2WD and did not come with a skid plate. I understand they are a bit of a pain. If someone reading this lives in the Dallas area that has one I would love to do that video.
Thanks
Very very welcome! Glad to help.
Did your truck not have skid plates? I hear they are a pain to get off.
Love your video. I will definitely subscribe.
Thanks so much Ron. No skid plates though. Maybe 4x4's have them??? Not sure.
My 2wd has a skid plate and after the 2nd change I cut a circular hole in it to make access to the filter easier
Also use a pvc hose on the plastic filter drain to make it easier to aim into your collection bucket
@@dickiedunn5655 Is yours a 2019?
@@DadsGarageDIY ‘12
@@dickiedunn5655 They must have removed the skid plate by 2019. Probably to save money. Of course, right???
The plastic filter housing with time can crack - amazon sells an oem Toyota housing that's metal for $25 or so a good investment considering how much hot oil will circulate through that part. Also they only used to be metal ... :|
Nice input. Really appreciate it Stunt Driver!
very good info...
Thank you! I appreciate that. Please subscribe. I have other Tundra videos and more to come. Hopefully other good info too. I appreciate it!
@@DadsGarageDIY np subbed
@@mikeatv Thank you!
We need more maintenance on the sa.e Toyota tundra like coolest flush ND spark plugs and transmission flush and change cabin filter ac and brake pads and rotors
Let's do it ....make more views and subs
What size removal tool are you using? Specs say filter is 65mm, but most tools online say 64mm.
Here is the website to look up the one you need. Our's is a 2019 so don't want to assume your's is the same. www.motivxtools.com/pages/search-by-vehicle
And here is the link to the one I use. They call it 64mm. www.amazon.com/Motivx-Tools-Toyota-Filter-Engines/dp/B00XTAGHU0/ref=sr_1_5?crid=3MCUEYDDZ6UEM&keywords=mx2320&qid=1653839284&sprefix=mx2320%2Caps%2C126&sr=8-5
I would keep good records and receipts to prove I changed the oil to make sure the warranty stays valid.
Great advice Mike! I appreciate the comments.
Please subscribe if you haven't already. More Tundra content coming.
Dealer in lakeland left my fill cap off for 4,000 miles how best to remedy that? I changed it but im wondering if i need change it again soon after?
WOW. Mistakes happen. But that's not good. 1 oil change will be fine then back to your normal routine.
Good luck Chris. Good hearing from you.
@@DadsGarageDIY thanks for prompt reply!
@@chrislowe5575 Absolutely sir. Always do unless RUclips doesn’t give me the notification.
i got the toyota oem filter from my local walmart for around 7$.
Wow. That is awesome! Thanks for the input.
Did you have skid plate on tundra’s oil change
No sir. I have been asked that a lot. I am assuming that is on the 4x4 model. I hear it is a bear.
where are the links to buy the stuffffffff? thanks for the video
Hi ylastra88. Appreciate the comments. I started putting links in and Amazon removed my account because they said I didn't qualify for some unexplained reason. I am not sure if it is because I didn't have enough subs or if people weren't buying enough from the links. Not sure. Was pretty frustrating though because I was only in their program for about 60 days. They told me I could reapply later. They make it difficult for people that are just starting out. Ugh! The filters you can either get on Amazon or your local auto parts store. The oil is readily available but the best price I have found is Sam's. They seem to put it on sale for $10 off per case every other month.
question, do you have a skid plate on your tundra you removed beforehand?
I don’t. I hear that it is a really pain. Just changed the oil in this one again today. Good luck William. If I can ever find one around here with the skid plate I’m gonna do it for someone so I do a video on it. Let me know how it goes.
@@DadsGarageDIY i see, did you have to jack up the car or use ramps? or did you have enough clearance to do the whole oil change?
@@williamchen2145 Plenty of clearance. Good hearing from you again William.
It’s best for the oil to be hot so you can get more old oil out of it
Just not too hot to where you get burned. A few ounces is not worth a scalded hand. Thank you, sir!
They should have used a can filter. That cartridge stuff is a PITA. My 1985 Suzuki GS-1150 used that.
Not sure why the did it this way. It is less convenient and often more messy.
Did your Tundra come with a skid plate?
It did not. I am thinking maybe that was a 4X4 thing??? Not sure. I bought it new so it is the way it came from the factory. I hear the skid plate is a pain when changing the oil.
No skid plate?
Nope. I am guessing 4x2 vs 4x4. I hear the skid plate it kind of a pain.
I just bought a 2020 tundra I currently have 3000 miles when should i do my first oil change?
Congrats same. At 5000 miles. When you purchased a new Tundra they give you a 2 year/25,000 miles Toyota care for free. Contact your local Toyota dealership for free maintenance like oil change and tire rotations and a lot more. www.toyota.com/owners/parts-service/toyota-care
@@z3lot thanks a lot i really appreciate it!!
@@joshforcha668 You're very welcome enjoy your Tundra for a long time!
You too. Great trucks!
Very welcome!
If you could show where the canister is would be helpful
Sorry about that. Hope the video was helpful despite that.
Got my Tundra from a Ford Dealership and they gave me a complementary oil change and started leaking oil 2 days later….they didnt replace the gasket which caused the drain plug to loosen 🤷♂️🤦♂️. You want somethin done right you gotta do it yourself
Sometimes that’s just the truth. Similar story here….took my Corvette to a Chevy dealer to get the oil changed and the technician could not figure out why he kept overfilling it with oil. He didn’t know it had 2 drain plugs. So, he wasn’t getting all the oil out. Ugh!
Not trying to be critical, YOU NEED TO PUT OIL ON BOTH O-RINGS, BEFORE RE INSTALLING, TO LUBE , THEY WILL GET DRY, AND MAKE GETTING HOUSING OFF ALMOST IMPOSSIBLE, the dealership messed mine up, IT TOOK A 1/2 IMPACT TO REMOVE
That makes a lot of sense. We always lube the gasket on a spin on. Great thinking Freddy. The 1st time I did my oil change I took it to them and made them change it for me too. It came from the factory way over tight. I thought I was going to break it off. Thanks for the comment sir. Hope if you haven't already you will help me out by hitting the subscribe button. Really appreciate it Freddy.
Next time take the filter canister drain adapter and the drain spout through the cap of a Gatorade bottle. Make an X-cut with a knife in the Gatorade cap and push the cylindrical drain spout through the cap.
Place the cap back on the Gatorade bottle. When it is time to drain residual oil in the canister, push the bottle and cap into the drain port receiver in the canister.
The oil drains into the Gatorade bottle and does not squirt all over your hand or splatter into your drain pan. I don't even pull the drain pan over and under the canister.
Then you can poor the oil into your recycle jug, where it can be filtered, recycled and sent to China to burn in their power plants to power their factories or maybe recycled and used to lubricate the twin high bypass turbo fan engines in Al Gore's, Leonardo DeCaprio's or Bill Gate's G-5;private jets and personal super yachts.
Very nice tip John. Much appreciated sir.
We have to protect this dad at all cost.
For sure.
What year is your Tundra?
2019
The old oil should be at least warm prior to draining.
Very very true. Great addition! Thank you Stanley!
Tundra... best truck ever with the worst oil filter setup ever. It's the same on most Toyota's (ie, Rav 4, etc).
I would tend to agree with both statements. I have run fleets with Fords and Chevrolets. And no offense to either of them or their fans but the build quality and the "heavy duty" build is really in a different league. But, this is a really dumb setup with the oil canister. Thanks for the comment Mumen Rider. Much appreciated. I have other Tundra content. Please subscribe if you have not already. Much appreciated.
What year is this tundra
2019. Thank you Jerry.
How steep is your driveway?
Pretty steep. Had trouble not scraping with the Charger and the Corvette is impossible not to scrape. But, my neighbors is worse.
@@DadsGarageDIY you didn’t have to level the tundra when changing oil?
@@homie817x No. With the slope on my driveway could it leave an ounce of the old oil in there? Maybe. They leave more than that at a quick lube place by not letting it sit and drain flog enough. Less than an ounce in a vehicle with an 8 quart capacity doesn’t concern me. And I change it in half the miles Toyota recommends. But, when I check the oil level after the change I do get it on level ground. Great question.