Would you say if everything checks out good on a 1999 txt 36v but I am getting 12.9 volts on the white ITS wire when I press the peddle it’s probably an internal controller issue? I get 14.6v on the black ITS wire.
@@matthewTownsend-dt7ye first do this. Take the floor board up. And unplug the white wire and test voltage on the its terminal. If it shows 12 volts replace its if it doesn’t replace controller.
Gotcha. If the harness isn’t messed up or water in the pedal box and there isn’t any water under the it’s. Yea replace controller. Seen that a couple of times but rare
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
Would you say if everything checks out good on a 1999 txt 36v but I am getting 12.9 volts on the white ITS wire when I press the peddle it’s probably an internal controller issue? I get 14.6v on the black ITS wire.
@@matthewTownsend-dt7ye first do this. Take the floor board up. And unplug the white wire and test voltage on the its terminal. If it shows 12 volts replace its if it doesn’t replace controller.
@@HeyHeyHey97 black wire has 14.5 V constant white wire shows 12.8 constant replaced three different ITS just ordered controller
Gotcha. If the harness isn’t messed up or water in the pedal box and there isn’t any water under the it’s. Yea replace controller. Seen that a couple of times but rare
You have a dcs?
@@HeyHeyHey97 yes sir. 36v 5pin.
Muy buen video
Ty sir
0:55
what about it ?