Rebuilding a Destroyed and Abandoned Supercar | Part 7
HTML-код
- Опубликовано: 26 май 2024
- Go to⬇️⬇️⬇️
tryfum.com/JBI and use code JBI to save an additional 10% off your order today.
Get your CAR VERTICAL report here⬇️⬇️⬇️
Thanks to car vertical for sponsoring todays video
USE CODE JBI at checkout for 20% off your next vehicle history report
www.carvertical.com/landing/v...
#ad #sponsored
In this episode i face some serious fittment issues and a special guest takes the JBI EVO for a rip!
My new build is going to be the biggest challenge I’ve ever undertaken! Wish me luck this is not going to be easy…
Check out the best welders and collision equipment around at HSautoshot.com
and step up you welding equipment to pro level!
Thanks to JD Customs USA for supporting this build! Check them out here!
➡️➡️➡️jdcustomsusa.com/
Follow me on Instagram ⬇️ @jackbuildsit
jackbuildsit?ig...
🤝👉🏻Questions, collaborations and business inquiries here jackbuildsit@gmail.com Авто/Мото
Watching with you guys today hope y’all enjoy check out my sponsors below to support the channel!
tryfum.com/JBI and use code JBI to get a discount off your order today.
Get your CAR VERTICAL report here⬇️⬇️⬇️
Thanks to car vertical for sponsoring todays video
USE CODE JBI at checkout for 10% off your next vehicle history report
www.carvertical.com/landing/v3?a=Jack_Builds_It&b=2c9b600c&voucher=jbi
#ad #sponsored
Great video, Jack! Showing some love for Mighty Car Mods! Love from Australia
Great video JAck ! should wear a proper mask when applying resin pretty nasty stuff.
Great episode Jack, you’re smashing it!👊
Fume 100% kicked vaping... helps calm my anxiety
How refreeashing to see a famous person in the video as a surprise without any clickbates on the thumbnail! Not only a great mechanic but a humble person, my respect!
those of us who clicked for the build got a nice surprise. ben is just damned good people
@@theParticleGodit was great but I’m hoping that Jack carries two mics with him next time though
Yep, the surprise was MUCH better than any clickbait thumbnail could have been.
Nothing to do with the build, but I've gotta say that split screen timelapse with the ad is about the best handling of getting sponsors in that I've seen. Well done, sir.
Ben Collings giving his honest and straight opinion and asking good questions about the car whilst driving it and Jack answering and explaining his choices. Great stuff !! Two car guys where one is the builder and the other one knows everything there is to know about how to improve on the car. Absolutely loving this !!
Actually Jack, you're not rebuilding a supercar, you are building a supercar! You have a very bare, minimum of parts that are useable and you are using your immense skill to replicate a car. You are a craftsman beyond the capabilities of most men and it is extremely satisfying to watch you using your brilliant skills. Freddy is a very lucky man to have you on his team too.
By the way, Ben knows how to drive the cars, you know how to build them.
The Stig absolutely ripping your evo, so awesome!!
Getting the STIG to yell “BLOODY HELL,” and also get a thumbs up from him must’ve felt AMAZING for our dude!
I love how Ben Collins seems to just be traveling the world now interacting with all these automotive influencers.
I think Ben’s manager has organised a lot of exposure for Ben to publicise and promote his name prior to launching a Ben Collins series of his own. (It may relate to a new “ Top Gear style” car programme for instance) 🤔
Good to see ben being honest about the car in both praise and constructive criticism actually helping jack to build his dream rather than blowing smoke, bens a proper bloke
Dude that was epic. The way that you finessed the door to latch properly. Love to see the master at work. Having the Stig drive and give feedback on the Evo is an exquisite moment. So cool.
The Noble is really coming along nicely. As a Brit, I've always been a huge fan of Lee Noble's work! Great to see Ben make an appearance too. I love that he's really embraced the RUclips community and seems to be getting on really well with everyone in the Tavarish/Matt Armstrong extended family.
How does Jack NOT have 500K+ subscribers? He is rebuilding a rare supercar and has Ben Collins on for what honestly could be a stand alone episode. Keep up the great work Jack, you are on the right track to have a 1M + channel.
Having Ben Collins drive your build and give you a clinical unvarnished opinion about what he likes and would prefer is an amazing opportunity and experience. Once in a lifetime.
Dude, your Evo got The Stig's seal of approval. Congrats Jack, you've officially made it 🤟
These are the sort of issues that make most people cry and leave the car as an unfinished project in the garage for a decade... Unbelievable skills jack
Yeah marketplace is full of them!
Panel and Doors are a B!! if you don't know how. This guy gives a master class.
That was one of your best videos, IMO. The dialog was fluid, and the reconstruction was creative to engineer many workarounds. I view getting a car back to stock entertaining, but reengineering a door to make multiple facets mesh in a custom build is genius!
The thing with the nobles is they're not made on a normal construction line, so everything will be slightly out. But by the looks of it your actually improving the build quality!!!
Really good craftsmanship, Jack! I've been a auto body technician for 28 years, and i love to watch you're videos. Keep up the good work 😊
The enthusiasm and the calmness Jack is when building this Noble is something out of this world. I believe this will come out wonderful and beautiful build, Jack.
Jack having faced something similar with the hinges on a few British classics and Lotus is to drill a whole through the hinge and door and use a role pin through the hinge as a locator stud. It guarantees (almost) the hinge going back in the same place. Hope that helps.
Yes, people do this quite often to locate hoods on hood hinges. People don't take doors off as often, otherwise this would be very common for doors too.
Instead of a roll pin, a couple holes with drill shanks stuck through them is the way I've seen it done.
2 seconds in the car and the stigs doing handbreak turns 🤣
Dude I’m so happy for you. Thank you for having us along for the ride. Onwards and upwards my man. I wish you all the best 🙏
You sir are a craftsman. No one is doing anything your doing right now on RUclips. Keep killing it.
having Ben Collins drive your build is surely on every car guys bucket list, that was epic.
Crazy you got to drive with the Stig! Awesome!
Jack's got the EVO that Paul Walker and Vin Diesel wish they would have had for their movies. Mitsu's aren't known for their reliability when pushed so far beyond stock but Jack seems to have gotten it spot on...and it's freaking gorgeous.
if the door took you 6 hours.....it would have taken me 60! Your attention to detail and skills set is second to NONE and i look forward to every episode👍👍😀
Enjoying the series, its gonna be awesome when its finished!
Really loved this episode, Jack!!
Sooo sick that Ben Collins got to experience the EVO!!
Jack , I love your channel. It’s all facts and no filler. I wish you all the luck in the world with this build ( not that you need it) 🇬🇧
I love the fact you didn't mentioned the rpesence of the Stig in the title... no clickbait, but you deserve more views, so consider it in the future!!
Great job on the doors & what an awesome ride along with the infamous Stig!!!!
Absolutely 💯 enjoyed the Stig part🎉 what a great guy! And you Jack... NEVER CHANGE!
Jack, I've a lot of FRP experience in my past and can relate to how much effing work it took to get the driver's door fitted. Respect. (my skin itches from FRP memory)
Fume has helped me kick vaping!!! Love it... it's not a replacement but absolutely helps with anxiety and supplement the action of vaping or smoking. This build is a headace... I enjoy body work but this is omg
Okay that was really epic. Having the stig give such good feedback is epic, and no clickbait title, so good.
I’ve had the pleasure of meeting Ben he’s such a nice guy. I asked him if it was him driving the Renault F1 car on top gear . He said no they wouldn’t let me 🤣. Build is coming along great jack can’t wait to see this one
finished. I’m from the UK and I’ve never seen a noble in person it’s nice to see you saving one 👏🏻👏🏻
Between this video and the last one, I've just watched about 45 minutes of you fitting a couple of doors onto a car. And I was entertained for every minute of it and wouldn't have cut any of it. I'm almost as impressed with your videography skills as I am with your bodywork skills!
Jack, this has to be a forever car for you right? All the work you're putting into this, it's going to look so amazing, it's going to be super rare. There's no way you sell this thing right even if you sold it nothing you got would be as unique.
Nice to see Stig on both sides of the pond mixing with different RUclipsrs 👍👍👍
Work time lapse during ad.......well played sir. You got me.
A great start to Memorial day 👍
JBI ROCKS 🤟
Here’s a helpful tip…
Once you’re happy with the door alignment, drill a 1/8 hole through the hinge and door.
When it’s time for finally assembly, insert an 1/8 inch drill bit through the pilot hole you drilled and it’s aligned and ready to tighten.
What a nightmare with the door it must have been off camera. The words that must have been said... lol
The hardest part about that door was deciding how to make it fit right I had so many different ideas, but most of them are way more invasive than the one that I chose thankfully, the one that I chose was a good idea and sorted out the door pretty quickly
Breaking up the video with the Evo is awesome! More of that.
This is a SUPER ambitious project, I am really happy to see this project progressing along well. Keep up the great work, Jack!
Jack posted 36 seconds ago. Shit I'm late
Loser
Slacker.
are you always such a overly dramatic Nancy-boy begging for attention?
*Ben's* got great pointers! Listen to him Jack!
The door alignment must be very frustrating, I admire your patience and dedication for the project. That's can be a torture for the majority of pepole. You got my respect.
Some say he is drinking Tavarish' P1 seawater for lunch, and that he is a hotboi himself. All we know, he is called the one trashing Jacks Evo!
The video was worth the wait Jack! Massive work done. Cant wait to see the end result.
It took a lot of engineering, balls and skill to cut and modify that door! Bravo!
Watching 👀 you from Cyprus on vacation
That evo is stunning! Noble is coming along nicely.
Jack, great video.
Awesome work on the Noble.
And a cool surprise.
Literally learning how to paint aircraft with the CAF right now lol.
I'll have to watch later
Hey, having crank windows is smart and saves a good amount of weight, especially if you use polycarbonate for the glass
Thank you for being a sophisticated gentleman!! Jack for pres!! And what I mean by that is, most channels are simple entertainment, we appreciate the process and the teaching, thanks man
Looking awesome, Jack. This Noble is a perfect project car. It's a proper, raw British sports car with supercar looks, which not many people know (especially in the US). So much potential to turn it into something unique and I know it's going to look crazy!
I know it's a massive headache making panels and parts fit a hand built car but these are the kind of projects which gain you respect for your talent and give you a reputation as a top guy in the industry. An absolute nightmare but worth the sleepless nights, and I'm sure you're learning and levelling-up your skills and knowledge along the way! Godspeed.
Great video Jack and great positive feed back from Ben and glad that the Noble is progressing along perfectly
Seeing the Stig loving it must meen so much to you! Be proud of your work! ❤
It’s nice to see people genuinely enjoying what they do. Cool bro. Keep it up
This a great series! these cars are a lot of fun. I have been in one on a racetrack...great speed and handling. very good decision on no power windows...it would add a lot of weight and complexity to those doors. your left door mod was exactly the right thing to do...no other choice.
I hope you thank Tavarish every day for this super easy project😀 it’s unreal how complex this thing is
Great video. Your work on the Noble is epic and I'm looking forward to the finished product. Loved the Ben Collins insert. Both the passenger and driver enjoyed it.
Love that the Stig is behind the wheel for less than a minute and immediately pulls a handbrake slide without hesitation.
Bro...THE STIG just drove your Evo!!! Amazing to watch your journey Jack!
I know!! So crazy right.
I love fiberglass work. This car looks like a headache, but it's going to soooo pay of! Great work Jack. Simply amazing!
Great job Jack ! What I like seeing your videos is the reality... Just to put a door in place can takes hours or days... Seeing Foose or others cars enthusiasts TV programms were they are 10 specialists to restore a car on an episod with 3M, PPG, international sponsors. Never any problems, tons of equipments on the car... Frankly I prefer the reality !
When I saw you cutting the freaking door to adjust the latch, it fell on me to expect EVERYTHING in a project, and fear NOTHING. That was scary, man. Real scary... great progress btw
Jacks' masterclass. I wonder how many body shop people watch these videos.
As a UK viewer, it's so good to see you. Freddy and Matt Armstrong all collaborating! Absolutely loving the videos Jack. Keep them coming
Great build tips.
You are so cool 😎.
Great to see the Stig enjoying your car and giving you some feedback to improve the experience.
Top notch
😎😎😎👍👍👍
Awesome work! Can’t wait to see it painted. I say if you want to up the anti on suspension on the evo I say go with some 2 or 3 way shocks feal suspension, ohlins, moton ext. more $$ but major difference. I wish I didn’t have my ohlins stolen for my car years ago but 🤷 that’s life lol
The master just returned back in to the room 👍👍🇺🇸🇬🇧🇺🇸🇬🇧🇺🇸🇬🇧
Everyone stop what you are doing and pay attention.
Best thing on RUclips all week, great episode.
The effort you put into the details makes your channel so good.
so informative as always. I really learn a lot from your videos jack! One day I will build my own kit car as well.
@jackbuildsit Also adjust your camber in the front to be bottom-out, and your rear wheels to be toe-in. That usually helps Four-wheel drive cars to be more pro-oversteer
Hi Jack. You're definitely crazy. Wow, those doors are hard work lining up, I don't know how you managed it, lol. This build will be well worth all the grief and hard work you're going through. Go on, Ben Collins, beautiful car, Jack. Wicked video, bro. 💯👌👍🇮🇪🏁
Doing such a sick job dude! Congratulation on the growth, I remember your first appearance with Freddy, you've become an absolute natural in front of the camera!
Wow Jack ! You got to hang with the stig!!
Also nice job of the door repair 👍🏻
Jack Builds It BY HAND! Good forethought on the hinges, very wise. It doesn't look good, it looks great!
Just what i needed.. Perfect Memorial day watch..
All these UK/US crossover episodes are a blast
I cant wait to see this thing finished , with this much work the end satisfaction is gonna be off the chart.
Nice work as always
All the updates of the channels I watch come in lined up, what a treat 🎉
It's like listening to Bob Ross. That's a good thing.
I LOVE how you’re getting sponsorships so soon after you started this channel; and also getting THE STIG on?!
To get the MF’ing STIG to say “BLOODY HELL!” as you launched is all the validation needed. That was AWESOME!!
You’ve made it! I’m so happy and proud that Amazing talented people like you rose to the occasion and found proper recognition of your incredible hard work. What an inspiration. What a stud.
Once you have enough cars built you should do an outro of all the cars you built
I Love what you're doing! I can watch this for hours..
Best in the series! I love these, from you and Freddy.
It would look great with some of Dave Kindig’s handles on those doors
With ya on this bro! Really think, you're gonna make one of the best Nobles.. something to see!!
That door modification is next level
Nice job Jack , I can’t wait to see this finished and rolling shots
I'm amazed how much grip Evo has with that massive power,but yeah as driven one for some 1000miles with same power I know how lethal it is as in road when try overtake some cars,it's really mind-blowing. So sharp,no play. That's what I'd like. As Ben said if you wanna just fool around you need to change the setup in the front.
I was on the track with that kind of Evo 9 and there it had semi-slicks on and then it was fun..so much fun I could not drive it good cos I didn't want to drive it like on rally stage. It has to get to know and then one can drive it ❤️🔥
this channel has the right ingredients to be huge. jack is highly skilled.
❤ i can't believe you're building one of these...my neighbor growing up had one in silver and a orange Gallardo....the noble was one of the best sounding cars i ever heard...can't wait for you to finish it.
Ben Collins is just such a great guy; what a treat to have him drive your beast!
Just amazing how you find your way forward with this project