Install Pump in Kenmore Elite Front Load Washer - OE Code

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 119

  • @migueljimenez6594
    @migueljimenez6594 7 месяцев назад +3

    Thank you for you video. Next time you can lean against the wall your washer and take the pump off from the bottom. Just a thoug

    • @MillGapFarms
      @MillGapFarms  7 месяцев назад

      Funny you mention that... Last weekend someone gave the same advice and low and behold, our washer pump died again... Here is the video of me doing just that! Thanks for watching and the suggestion. ruclips.net/video/EFnyEKGAAd4/видео.html Kevin

  • @bakkenhawk
    @bakkenhawk 11 дней назад +2

    Bro you can do everything from underneath if you just tip it on its back there's a huge hole on the bottom with plenty of room to work. I was done in 30 min flat. What you did looks like a friggin nightmare! Good on you for having that amount of patience! But you didn't have to go through all that!! And you did this 3 TIMES??? Good grief man you must be a saint!

    • @MillGapFarms
      @MillGapFarms  11 дней назад

      This is what is interesting about RUclips, this video still helps folks and seems to get views. I've put up another 2 or 3 videos about the same thing. One of which is this video... ruclips.net/video/EFnyEKGAAd4/видео.html In this video, I replace it from the bottom. And you are very correct bakkenhawk, it's much faster! All said I think I'm on pump 6 or 7 or may even higher. I keep them on the shelf nowadays... here is my latest order (just yesterday) amzn.to/3OmNN7a (it's an affiliate link). We do a lot of laundry and as much as I hate that this happens, the washer has performed well... except for the pump issue... I've bought them from kenmore and amazon. Both are terrible but the amazon pumps are much much less expensive. Thanks for taking the time to watch our video. And leave a comment. It means a lot. Hope you would consider visiting the channel again! Kevin

  • @acapler
    @acapler 8 месяцев назад +5

    Thank you for your video!! Just finished installing the new pump, running a laundry load and all seems to be going well!! I’m a 48 yo working mother of 2 who is married to a very handy guy, but I’m determined to figure things out myself these days 💪🏼

    • @MillGapFarms
      @MillGapFarms  8 месяцев назад

      You made my day! Thanks for taking the time to watch our video and let me know how it went! Thanks for watching our video. I hope you will visit our channel again. Kevin

  • @paulf9446
    @paulf9446 Месяц назад

    Thank you for posting this! My washer is slightly newer but close enough to where your video helped me immensely with changing out my water pump. Didn’t need to make the modifications and also saved hundreds with your help. Appreciate you, greatly!

  • @gingerherrod8702
    @gingerherrod8702 9 месяцев назад +1

    Thank you so much for this tutorial! I have successfully replace the drain pump and so far (fingers crossed) things are working like new again! You made this job so much easier, I had video playing over and over as I went through each step, it was like having a friend in the laundry room helping me!

    • @MillGapFarms
      @MillGapFarms  9 месяцев назад

      Hi Gingerherrod8702, You made my day with your comment. This is exactly what we want to do in this community. Be a resource to others. We are glad it worked out for you! I just recently replaced the pump again for the probably 5th time. We do a lot of laundry here on the farm. Thanks for watching our video and taking the time to share your thoughts! Kevin

  • @job38four10
    @job38four10 Год назад +4

    My (09) Kenmore Elite is like yours and had the same 0E code. So since my older son is more mechanically inclined we used your video in finding where all the screws are and how to get at the pump, that was a big help!!!
    We got the pump out and saw the impeller was broke, so we verified part number from several online sites along with my washer model number and ordered new pump and gasket along that special ring tool from Amazon, I got all three items for $100.00 in 4 days. For some reason most of the gasket prices was $100.00+, I managed to find one for $45.00, pump prices was around $25,00 - $45.00.
    I called an appliance repair place and he quoted $450.00 - $550.00 for fixing pump only, so it does save a lot if when folks like you put a video out showing how it's done, thanks for posting!!!!!!!!!!

    • @MillGapFarms
      @MillGapFarms  Год назад

      Job38Four, Comments like these are what motivates us to post videos. We love sharing what He has done for us through videos like this! Thanks for taking the time to watch and share your thoughts! Means a lot to us! Kevin & Emily

  • @birdmansix
    @birdmansix 3 месяца назад

    Thanks to your video I was able to replace the drain pump on my kenmore 41262.

  • @eduardochavez3852
    @eduardochavez3852 13 дней назад

    Thank you very much man. I was able to get it all done thanks to your video.

    • @MillGapFarms
      @MillGapFarms  13 дней назад

      Awesome! Thanks for the comment! If you have to do it again try this video. ruclips.net/video/EFnyEKGAAd4/видео.html it's 4k and a bit easier. I had someone make a comment last week about installing their pump using our video and wouldn't you belive my pump died again... I have lost count on how many I've installed. But for sure, I can now do it in less than 1 hour with this method. I would also recommend keeping a pump on the shelf. I keep 2 now. Here is a link to the pump I used. amzn.to/4fGoNDW i have used pumps from Kenmore and Amazon (the one above is an affiliate link on Amazon - you don't pay more) and each have failed at a similar rate. The last one lasting only months. I've had some last a bit longer. We do a lot of laundry on the farm and that could be a big part of my problem. Thanks for watching and taking the time to leave a comment. Hope you would consider visiting our channel more often. Thanks, Kevin

  • @Tyomad
    @Tyomad 4 месяца назад

    Was an older model than the one I have, but your video answered several questions and helped me get ours back up and running!

    • @MillGapFarms
      @MillGapFarms  4 месяца назад

      Glad this helped! One day I will need to put a new pc board in but as long as the reset works, I'll continue to do this. Thanks for watching and sharing your thoughts. Kevin

  • @shannoncozens
    @shannoncozens Год назад

    Huge thanks for the step by step instruction. I got the pump and special tool off Amazon for $45. You saved me a ton of money and hassle.

    • @MillGapFarms
      @MillGapFarms  Год назад

      You made my day Shannoncozens! Thanks for watching and sharing your thoughts! Kevin

  • @matthewvixie7339
    @matthewvixie7339 2 месяца назад

    Great Video Kevin, ya helped a Pastor most likely fix his washer 😊I went ahead and ordered the pliers & should get here tomorrow.

    • @MillGapFarms
      @MillGapFarms  2 месяца назад

      I'm glad I could help Pastor Matthew. I did another video on the same pump but I went through the bottom. Here is that video. ruclips.net/video/EFnyEKGAAd4/видео.html Thanks for taking a minute to leave a comment. I'd love to hear how the replacement went for you! God Bless! Kevin

  • @glynnstjean287
    @glynnstjean287 Год назад +2

    Loved how you showed all your mistakes, because that's exactly what would happen to me, & has happened to me on similar appliance repair projects. Thanks for the informative guidance & insight!

    • @MillGapFarms
      @MillGapFarms  Год назад +1

      I don't think I showed all my mistakes Glynn St Jean. The video would have been too long!!! Most of them though. Having done this 3 or 4 times now, you'd think I would have this down. I don't know if it was in this replacement that I found one of my tools. I wonder what I'll find next time! Thanks for watching and taking a minute to share your thoughts. Means a lot to us! Kevin

  • @Bryan-e6y1c
    @Bryan-e6y1c 11 месяцев назад

    Just did this with an old Kenmore elite. I bought the OEM pump and used your video. You rock! Here's hoping it kicks around for another year lol

    • @MillGapFarms
      @MillGapFarms  11 месяцев назад

      You made my day with your comment! Thanks for watching and sharing your success! Kevin

  • @michaelsullivan7927
    @michaelsullivan7927 Год назад

    Thanks for taking the time to create and share this video. It was very helpful for my drain pump replacement that I completed yesterday. I enjoyed your positive and calming personality, which helped me when I wanted to toss that door gasket spring clip out the window :D

    • @MillGapFarms
      @MillGapFarms  Год назад

      The power of editing keeps my calm. I don’t use this term often but I truly hate that spring! Thanks for watching and taking the time to leave a comment it motivates me to make more videos hopefully not about a Kenmore! Kevin

  • @marklaughlin7079
    @marklaughlin7079 Год назад +1

    Thanks for posting this video. It helped me fix mine. I had to replace the drain pump also. The only thing I did different was use a screw gun. It’s a lot quicker taking out and putting the screws back in. I did order the spring tool to take the spring off which made it much easier. Thanks for that also.
    I ordered the tool and drain pump from Amazon.

    • @MillGapFarms
      @MillGapFarms  Год назад

      Thanks for watching and leaving your comment Mark L! It motivates us to make more videos. I'm glad you were able to get the pump installed. I can't tell you how long it took me the first time to get the ring back onto the front. I've done this 2 or 3 times already and didn't think about the screw gun. I'll be able to do it much faster next time... which I'm sure is right around the corner! Thanks again! Kevin

  • @keefjackbee
    @keefjackbee 8 месяцев назад

    Thanks for sharing! I ordered the part you posted, with full trust in you (lol I didnt even check) pump has been replaced and washer is fixed. That rubber gasket ring was definitely a pain in the ass. It did just come right off though with a little tug of a needle nose pliers. Getting it on was the difficult part. I just used 2 hard plastic scrapers and used them to slide the bottom on while my wife held the sides in place.

    • @MillGapFarms
      @MillGapFarms  8 месяцев назад

      The last time I installed the gasket ring without the tool, I thought I would lose my mind. Even with the tool it can be a little tricky but much much easier! I had to get my wife involved too. It was simply hateful. Thanks for watching our video and sharing your experience! It means a lot to me to hear feedback. Hope you will visit our channel again soon. Kevin

  • @richalbert468
    @richalbert468 3 месяца назад

    Great video. Replacement pumps slightly different so your comments on modifying the shield helped.

    • @MillGapFarms
      @MillGapFarms  3 месяца назад

      I'm glad it helped. Thanks for sharing your thoughts. Kevin

  • @pappah707
    @pappah707 Год назад

    Salt of the earth. Video let me see the inside of my upcoming project. Thank you

    • @MillGapFarms
      @MillGapFarms  Год назад

      I'm glad this helped. Each time I need to do, I watch the video too. The last time I did it, I found one of my wrenches! Thanks for watching and sharing your comment! Kevin

  • @michaelflowers1317
    @michaelflowers1317 7 месяцев назад

    Use flat head to pry off spring from rubber casing. Does not take much force if you run the screw driver along the side. Worked well for me. Thanks for the video!

    • @MillGapFarms
      @MillGapFarms  7 месяцев назад

      Were you able to get the ring back on easily? I struggled with it for a long time the last time I did it so I bought the tool. Recently I had to do this again and I went through the bottom... That turned out to be a much easier repair. Thanks for watching and sharing your thoughts! Kevin

    • @dmwi1549
      @dmwi1549 2 месяца назад

      Video a year ago. Thanks for posting. 4 months ago you posted you had to do it again? What happened?

  • @AnneWilder
    @AnneWilder 5 месяцев назад

    Thanks Kevin! It took us a while and I had to get help with a couple of stubborn screws, but the washer is working again! Only one screw left over at the end! ;)

    • @MillGapFarms
      @MillGapFarms  5 месяцев назад +1

      If you are like me, we have a junk drawer full of old bits and pieces... And sometimes they find their way back to the original project they came from... other times, not so much. Thanks for watching and leaving your comment! It means a lot to us! Kevin

    • @AnneWilder
      @AnneWilder 5 месяцев назад

      @@MillGapFarms Oh, we do have a junk drawer! But the spare screw goes to live in the barn in the wood shop. Maybe it will get used sooner!? Also we just cleaned out the inlet filters, which would be a great short vid for folks that have hard water, if you're ever looking for another topic. :)

    • @MillGapFarms
      @MillGapFarms  5 месяцев назад

      You are very correct on the inlet filter. Ours is no longer gunked up... we added a softener and its really helped out. Thanks for the suggestion! Kevin

    • @AnneWilder
      @AnneWilder 5 месяцев назад

      @@MillGapFarms Any tips on the softener? Where in the water line does it go? We have a drilled well and lots of iron & manganese in the water.

    • @MillGapFarms
      @MillGapFarms  5 месяцев назад

      Please accept my apology Ms. Wilder. I did not see your comment. Our water softener is in our basement and is installed before the water splits and goes to the hot water and the cold water to the house. There are some kits that you can buy on amazon that will tell you the harness of your water. Here is a test strip that will help you understand your water better in regards to hardness. amzn.to/3L8v2CW This version tests a little more and it might give you a better idea as to how much iron you have in your water. amzn.to/3Sj9rMb For the best understanding do a water test at your local health department or independent lab. Again, I apologize for missing your comment. Thanks for watching our video and posting your question. Kevin

  • @AKMKGP
    @AKMKGP 7 месяцев назад

    Hi, Thanks for the video!! I appreciate it. I just ordered the pump. I will try to replace the pump from the bottom and not open anything, will let you know how it goes when the parts arrive. Thank you very much for taking the time to document and help us

    • @AKMKGP
      @AKMKGP 7 месяцев назад

      I did it from the bottom, it worked out. Thank you

    • @MillGapFarms
      @MillGapFarms  7 месяцев назад

      Wonderful! You made my day. Mine worked too. I will never remove that gasket again!!!! Thanks for taking the time to let me know it worked out for you! Hope you will visit the channel again soon! Kevin

  • @ATwriter
    @ATwriter Год назад

    Thank you so much for this video! Helped this husband keep the wash machine going!

    • @MillGapFarms
      @MillGapFarms  Год назад

      Glad I could help! Thanks for sharing your comment! Kevin

  • @donaldconnersr.8804
    @donaldconnersr.8804 2 года назад

    Great video, I found out I would never wat to be a washing machine repair man. I think you did a killer job on fixing that washer, seems like I never have much luck in that department.

    • @MillGapFarms
      @MillGapFarms  2 года назад

      I got small hands, so it's easy to get them into appliances. Thanks for watching. K

    • @seanstrickley3992
      @seanstrickley3992 Год назад

      Glad I am one and have small hands lol

  • @markortega3899
    @markortega3899 Месяц назад

    Thank you for this video sir!

    • @MillGapFarms
      @MillGapFarms  Месяц назад

      My pleasure! Thanks for the comment. Kevin

  • @MichaelGallegos
    @MichaelGallegos 7 месяцев назад

    Thanks for the videos and Mistakes. Help me immensely

    • @MillGapFarms
      @MillGapFarms  7 месяцев назад +1

      I think I need a channel on all the mistakes I make... it would be a lot more videos!!! Thanks for watching and leaving your thoughts! Kevin

  • @tuglife5737
    @tuglife5737 5 месяцев назад

    Just replaced my pump great video Thank you.

    • @MillGapFarms
      @MillGapFarms  5 месяцев назад +1

      Thanks for watching our video and leaving your comment. It means a lot to hear from folks that benefited from it. Every time I replace the pump on ours, I watch it again too. Thanks Kevin

  • @denislaouenan5553
    @denislaouenan5553 7 месяцев назад

    Thank you Sir, appreciate you taking the time

    • @MillGapFarms
      @MillGapFarms  7 месяцев назад

      Thanks for taking a minute to leave your thoughts. Means a lot to us. We would love to have back on the channel sometime! Thanks for watching! Kevin

  • @carifew2908
    @carifew2908 6 месяцев назад

    I got a chuckle when you said washer yoga because that is exactly what it feels like 🤭

    • @carifew2908
      @carifew2908 6 месяцев назад

      Also watched your videos before and got the spring clamp. Game changer

    • @MillGapFarms
      @MillGapFarms  6 месяцев назад

      For me it was a game changer. Have you seen my latest pump change video. I did it from the bottom. I can't say that it will be easier, especially if you have not changed one of these before but since I've done this so many times, I knew where the screws were located. Doing it from the bottom is easier and I didn't have to mess with the seal! ruclips.net/video/EFnyEKGAAd4/видео.html Thank you for watching my yoga video! Kevin

  • @wisdomwisdom817
    @wisdomwisdom817 Год назад +1

    Awesome job thank you.
    Can the pump be replaced from the hole at the bottom of washer, instead of taking so many things off ?

    • @MillGapFarms
      @MillGapFarms  Год назад

      Yes it can. I had a viewer who repaired washers tell me that. Next time I do it, I'll try it myself. about the only thing that I see as a challenge is finding all the screws and taking off the clamps. From the front it is very easy to see all of that. Thanks for watching and asking your question. Kevin

  • @someone_here_941
    @someone_here_941 Год назад

    very helpful, thanks. i did get hung up on some very rusty screws but was able to get around it.

    • @MillGapFarms
      @MillGapFarms  Год назад

      Thanks for sharing! And thanks for watching our video! Kevin

  • @usafyyc
    @usafyyc 5 месяцев назад

    Kevin, great video. I used it and got my washer torn down, pump.rplaced and put back together inside of 2 hours. Thought I was pretty slick. The problem, though, im still getting a DE code. Drain line and filter are clear, any ideas? Really tired of baling 6 gallos of water with every test run.

    • @MillGapFarms
      @MillGapFarms  5 месяцев назад

      I don't think I mentioned this in the video but have you pulled the filter? There could be something in there? Another thing to do is reset the pc board. Here is a video to how I do it. ruclips.net/video/viKY99zFQCE/видео.html Let me know if this works. BTW we don't live in an area without cell reception. I'm making hay today and will check back throughout the day for comments. Thanks Kevin

  • @26rangerfan
    @26rangerfan Год назад

    Awesome video, thanks for the in depth video with chapters and associated tools needed. Any chance you have a quick tip or how-to video for accessing a washer underneath a drier without removing the drier? My assumption is no, remove the drier and follow the video, but worth a shot before i wrestle with the drier up top. Thank you in advance!

    • @MillGapFarms
      @MillGapFarms  Год назад

      Carmen, Thanks for watching and asking your question. It sounds like you are using these as stackable units. We don't as you can tell from the video. There is a comment where a gentleman shares that he did it from the bottom. I think that is totally possible. Of course you have to get to it. If your washer could be pulled away from the wall (guessing it's against one) you could lean them backwards against a wall and work from the bottom. I would try this myself but before I did, I would make sure to secure the bottom so it doesn't kick out towards the front farther. Something that holds the units from moving is necessary. In my mind, the units could kick out and land on their back. Most likely damaging where the hoses go. Then you've got a bigger problem. The next time I need to replace our pump, I'm going to try to access it from the bottom. No need to take off the gasket if I don't have to. I think you would need to be adventurous to change the pump with the washer on top. If you do it, take a video or a photo and email to us. www.millgapfarms.com. I would love to learn for your experience. Thanks Kevin

    • @26rangerfan
      @26rangerfan Год назад

      Awesome, thanks for the replay and thanks again for the awesome video! I ended up getting the drier down and repairing the washer once it was down, took about 3 hours. This video was awesome and it saved me about $700! Thanks a bunch!

    • @MillGapFarms
      @MillGapFarms  Год назад

      You made my day Ms. Pascuito! I'm glad it helped you! Kevin

  • @tonyromano4341
    @tonyromano4341 6 месяцев назад

    How did you come to the conclusion it was the pump and just a clogged filter?

    • @MillGapFarms
      @MillGapFarms  6 месяцев назад

      Thanks for watching our video Tonyromano4341. The first time I got the "OE" code, I tried to clean out the filter. It had scale from our hard water but no major clogs. Then I did what I thought was the next step, install the pump. After getting the pump off it became apparent that the impeller was broken, or at least not working correctly. Every time I do this, it's the same thing. The impeller breaks on the shaft some how. I have lost count as to how many times these pumps have broken on us. I have been keeping one on the shelf for a couple years now. To the credit of the machine, we do a lot of laundry in it. Between living on a farm, two kids we have a b&b we operate here and it's not uncommon to do 5-6 loads a day. Not every day but 4 to 5 days a week we have multiple loads going each day. I don't put a lot of faith in the pumps. LG and Kenmore use the same pump. Thanks for your question. I hope this helps. Kevin

  • @edgarfierro3110
    @edgarfierro3110 Год назад

    Very helpful,and detail how to do it thank you

    • @MillGapFarms
      @MillGapFarms  Год назад +1

      Glad it was helpful Edgar Fierro. I've put a few of these on and each time it gets a little easier. Not fun but easier. One time I found my lost socket! Thanks for watching and sharing your thoughts. Kevin

  • @thomasmcalear8673
    @thomasmcalear8673 8 месяцев назад

    I ENJOY THE TOTALLY LAAA-DEE-DAHHHHH FOLK ACOUSTIC GUITAR MUSIC YOU HAVE PLAYING IN THE BACKGROUND WHILE YOU FLOOD YOUR LAUNDRY ROOM....
    😋😋😋😋😋😋😋😋😋😋😋

    • @MillGapFarms
      @MillGapFarms  8 месяцев назад

      I had to go back to the video because I forgot what I had going in the background. The music should have been a bit louder in this video. I could barely hear it. Thanks for watching and leaving your comment. It's the little details that others notice that make doing these videos fun. Hope to see you on the channel and in the comments more. Kevin

    • @thomasmcalear8673
      @thomasmcalear8673 8 месяцев назад

      I WAS ACTUALLY HAVING BECKS-E-BY AT MY LOCAL DENNY'S DINER OF T-BONE STEAK WHEN I DID THAT SMART ALEX COMMENT.
      PLEASE DON'T CHANGE A THING, THAT TUTORIAL HAS HELPED ALOT.
      ONE OF THE OFFICE GIRLS AT WHERE I WORK HAD THIS ISSUE WITH HER STUPID KENMORE He CLOTHES WASHER.
      I HATE ALL THESE NEWFANGLED THROW-AWAY CRAP MACHINES.
      FOUND THAT PUMP ON AMAZON PRIME BUSINESS, CHEAP....

    • @MillGapFarms
      @MillGapFarms  8 месяцев назад

      I did not take it that way. I have another video very similar to this one... because the washer pump has died multiple times... whether I buy OEM or off amazon, the pumps only last us about 1.5 years. I've done this so many times, I can now do it in about 45 minutes... Not something I'm proud of but certainly glad I can get it done fast. Thanks for watching and commenting again. If you have time, watch some of our other bad videos on the channel... some will leave you scratching your head I'm sure. Kevin

  • @gochefs5
    @gochefs5 2 месяца назад

    I got it out from the bottom with a 90° attachment on a drill on a 10 mm bolt.

    • @MillGapFarms
      @MillGapFarms  2 месяца назад

      Well done Gochefs5. I did a video on removing it from the bottom not too long ago. It worked well for me too. Having done it through the front definitely prepared me for locating the screws from the bottom. Here is that video...ruclips.net/video/EFnyEKGAAd4/видео.html Thanks for watching and sharing your experience! Kevin

  • @cynthiastewart7658
    @cynthiastewart7658 Год назад

    Good video😊

    • @MillGapFarms
      @MillGapFarms  Год назад

      Thanks for watching and leaving your thoughts. Kevin

  • @erichansen2685
    @erichansen2685 Год назад

    Thank you so much!!!!

    • @MillGapFarms
      @MillGapFarms  Год назад

      You're welcome! Thanks for leaving the comment! Kevin

  • @davidsoulfire2633
    @davidsoulfire2633 Месяц назад

    Can you go in from the bottom

    • @MillGapFarms
      @MillGapFarms  Месяц назад

      Most definitely. Here is a video the last time I did it... ruclips.net/video/EFnyEKGAAd4/видео.html Thanks for asking. Let me know how your repair turns out. Kevin

  • @kevinmatthews1264
    @kevinmatthews1264 8 месяцев назад

    I just replaced the pump on the left and we are still getting the same code. Is there an identical pump on the right side as well?

    • @MillGapFarms
      @MillGapFarms  8 месяцев назад

      If you have the same machine as we do, there is only one pump. Put a towel under the washer where the filter is located and remove your filter. It sounds like you have a blockage there. Thanks for watching our video. Hope this helps. Kevin

  • @bennywolf2169
    @bennywolf2169 2 года назад +2

    you can tilt the thing forward and replace is from the bottom homie, this way is wayyyy more work

    • @MillGapFarms
      @MillGapFarms  2 года назад

      Mr. Wolf, What a great idea. I have not done that before...as you can tell. Thanks for watching and sharing this great tip! Kevin

    • @seanstrickley3992
      @seanstrickley3992 Год назад +1

      U can but it's very tight and if you don't know what your looking for with clamps and all then how he's doing it is the way . But yes u can do it from the bottom

  • @seanstrickley3992
    @seanstrickley3992 Год назад

    Buddy I'm a appliance technician. To fix all your water issues from getting all over the floor and yourself. Buy a wet dry shop vac open up the front door empty inside the washer 1st from clothes and all water sitting inside it. Then open up filter at bottom at drain pump and slowly open up cap to catch it without getting water everywhere glad to help u out

    • @MillGapFarms
      @MillGapFarms  Год назад +1

      What a great suggestion. I don't know why I didn't think of this!!! I have 2 shop vacs and both work well with water too... but apparently not this kind of water...right? Thanks for watching and sharing your thoughts. As much as I hate to say it, I'll be fixing this again in about 1.5 years... Kevin

    • @seanstrickley3992
      @seanstrickley3992 Год назад

      Glad to help buddy . Hey when we're in there getting it done sometimes the stress gets the best of us. Don't beat yourself up over it. We live and learn. I had to get dirty to learn myself.

    • @seanstrickley3992
      @seanstrickley3992 Год назад

      Yes you can use shop vac to clean up this nasty water too. I use a 3.5 h
      Gallon vac get it from harbor freight Bauer it's cheap and works .

    • @MillGapFarms
      @MillGapFarms  Год назад +1

      Mine is a 20 gallon craftsman from 1994... it's loud but still ticking along! I appreciate your suggestions! Kevin

  • @oldyspices
    @oldyspices Год назад

    I
    Thanks for your awesome video. Now I’m going to try to fixing and replacing mine hopefully I can do it that will make my wife happy?

    • @MillGapFarms
      @MillGapFarms  Год назад

      Good luck with your repair Oldyspices! If you get into a pickle, go to our website www.millgapfarms.com and email me. Let me know how it goes. Kevin

  • @seanstrickley3992
    @seanstrickley3992 Год назад

    You did a great job though sir

  • @AMERICANPRIDE1100
    @AMERICANPRIDE1100 9 месяцев назад

    You don’t need a tool for the front spring u can pop it out with a screwdriver I’ve done hundreds I use a needle nose to put it back that tool is for 5he rear spring

    • @MillGapFarms
      @MillGapFarms  9 месяцев назад

      I have popped out the spring with a screwdriver. And it seems the devil tested me on the needle nose pliers... a couple times. So I bought the tool and it was worked flawlessly ever since. I would love to see how you are using you pliers to get those back on. That would be one nifty video that I would be glad to post for you. Thanks for watching and sharing your thoughts. Kevin

  • @AMERICANPRIDE1100
    @AMERICANPRIDE1100 9 месяцев назад

    2 faceplate screws is all you need to remove

    • @MillGapFarms
      @MillGapFarms  9 месяцев назад

      Hi Americanpride1100, Thanks for watching and offering advice. I've only done this 4 or 5 times so far... and one time about 3 weeks ago. How can you access the faceplate screws with the top on? Having done this a couple times, I can now do it in less than an hour. The first couple times, not so much. I would love to learn how to reduce that time even further. Thanks Kevin

  • @EKTORIOUSPRIME
    @EKTORIOUSPRIME 7 месяцев назад

    It's crazy there is a video only has 4 screws from the bottom 😂

    • @MillGapFarms
      @MillGapFarms  7 месяцев назад

      There is certainly more than one way to get this done. Would you mind sharing that video in the comments of this one. We could all learn from that. Thanks for watching! Kevin

  • @Matthewwesttt
    @Matthewwesttt 6 месяцев назад

    Lay it on the back and it’s out in 3 minutes from the bottom

    • @MillGapFarms
      @MillGapFarms  6 месяцев назад +1

      Thanks for watching and leaving your thoughts! I did a video just the way you suggested and worked like a dream. I got the pump out and the new one installed in less than an hour. Great suggestion! Thanks for taking the time to share your thoughts!! Kevin

    • @justinlane7803
      @justinlane7803 5 месяцев назад

      ​@@MillGapFarms can you give a link for the video where you tried from the bottom?

    • @MillGapFarms
      @MillGapFarms  5 месяцев назад

      ruclips.net/video/EFnyEKGAAd4/видео.html Hope this helps. Kevin

    • @MillGapFarms
      @MillGapFarms  3 месяца назад

      did you find what you needed. your comment got lost in the mix. You can email me through our website if you need to... www.millgapfarms.com Kevin

    • @Matthewwesttt
      @Matthewwesttt 3 месяца назад

      @@MillGapFarms glad I could help bro. I didn’t see a video I just got lucky and put it on the dolly and seen the bottom was open

  • @danielshinsky9594
    @danielshinsky9594 Год назад

    You skipped the whole process of taking the door off 🙄

    • @MillGapFarms
      @MillGapFarms  Год назад

      Thanks Daniel Shinsky for watching our video. I don't think in this video that I took the door off. I think I took off the front pane that included the door. I watched the video again and I don't see the need to remove the door. In fact, down in the comments for this video a viewer suggested going through the bottom and not taking off the door and gasket. I'm definitely going to try that next time I need to change out the pump. Thanks for watching and leaving your comment. Kevin