Thanks for watching! Here is a few tools to help keep those spark plugs in tip top shape! Have a great day ! Spark plug tester amzn.to/3paIbzl Spark plug cleaner amzn.to/3vKzApy Spark plug bpm8y amzn.to/2RT6KoB
On a kohler 18hp twin that's on a craftsman rider if the plug is oil wet than I can assume the rings are bad and engine needs to be rebuilt? Do I need to buy a compression tester?
said no one ever 😂😂. There are way more variables to take into account in tuning big engines, specially carbureted engine. No saying small engine mechanics are dumber, just not in the same level. Anyone who has touched a wrench in his life will know. It’s like comparing a house electrician with an electrical engineer in charge of the city’s electric distribution systems. 😂😂
@@hentaibodypillow250 thanks for proving my point. Just like no one says women are better at pulling someone to have sex than man. Easier = less skills required.
Dude I have been saying this too people lately and people just kinda looked at me crazy. My arguing point is this I can make a ford,dodge,Chevy run no problem. Now when you start trying to fix a small engine and make it run good/excellent I personally have to go back and do my research. Even then they give me hell
Thanks for the video, I have a 1987 TRX250X with low compression and the plug was fouled out, most people don't associate the two, you're the first video that said a spark plug was fouled from low compression, no I gotta figure out if it's piston rings or bad valve
Quite true, several years ago i changed spark plugs on an i6 and noticed oil on two of them. The engine ran, but definitely less ideal. I think it's simply because the spark plugs are the only thing easy accessible in the combustion chamber.
01:33 Tad too rich but ok 02:47 Little bit lean 03:22 Low on compression 03:58 Scored piston & cylinder 04:43 Too rich fuel/oil 05:18 Fuel delivery issue 05:47 New Spark Plug
I always check the spark plugs in the first season . I’ve seen spark plugs that is all black and i always replace the new spark plug in my Echo equipment .I service all my equipment before spring clean up
Bought a set of plugs at a local parts store and got home only to find the assholes sold me used plugs and of course I couldn't take 'em back. My fault for not going over each box. Lesson learned.
My old Honda gx110 has a black oily looking plug. It burns some oil but still runs good. The exhaust smells like there is too much unburned fuel sometimes.
My spark plugs are like me. Old and worn out. The plugs say it's not them it's the ECU. What should I do? Replace the plugs or the truck 🤔 To old to walk far so the truck better start running soon. 🛻🏃🚶🚶
Thank you sir. On my way to my dealer for an explanation after 1700 miles and one plug that looks like the second to last one, wet below the nut on gap side. 2020 Fat Boy
@@jonaaa6059 from Harley, it was a river in Egypt and a hands off statement due to the fact I did my first maintenance with a Harley tech who just opened his own shop. My assessment was faulty piston rings causing a type of blow back coupled with the engine burning rich. Finally a possible faulty install. So far, no issues with the replacement Screaming Eagle plugs and wires.
I have a mudbuddy 5500 they use vanguard engines got 2 carbs spark plug are always black motor runs good idle perfectly starts really easy I leaned my carbs low as they will go still same thing spark plugs black and dry after few minutes of running
I enjoyed your video but you didn't really seem to explain why. The spark plug with low compression you said had the correct fuel mixture. What on that spark plug told you the fuel mixture was correct and the compression was low. Would not the same spark plug be an indication of too rich of a mixture? If so how can you tell the difference
Well damn it man guess what I'm going to do I'm going to go pull some plugs and watch the video again and see where I'm at. My wife's going to help we were both watching thanks here we go. I want Cocoa Brown
Hey I just bought a boat and the plug gaps were from 0.35 - 0.48. This is from a v6 . I just changed the plugs , when should I pull the plugs just to see how the engine is running ?
I have a problem with a lawnmower where it runs but idles somewhat rough, and it won’t cut grass that well. I took the spark plug off and it was wet, cleaned it off, put it back in but the same thing happened spark plug was also wet again.
you should actually show as well a good old spark plug, as an example of a good looking engine with old used spark plug, so people can judge a good from bad engine
I bought a bike that has been sitting for 10 years and when I got it the oil was all black as well as the spark plug all black and full of soot. What do I need to do before replacing the spark plug with a new one? Should I clean the inside where it sits or spray it with something first? I've changed the oil and gas and cleaned the carb. The bike ran very bad before and died when reaching 4:th gear after some time and when riding it for a while. So I have it taken apart now since I will be replacing the petcock since it was leaking.
Good video, lots of great info. Quick question, do you think its ok to use a Champion plug RCJ6Y in place of a NGK BPMR8Y that I removed from an Echo leaf blower? The plug I took out was dry with a redish brown color. Thanks
Very nice video; keep up the good work I have a Honda Car with 1.3 IDSI engine having 8 spark plugs. The engine is powerful but the only center two spark plugs get really black after one week driving. I replaced old park plugs with new NGK spark plugs but the problem is same. Can you kindly guide which is causing this issue?
The brand new cmh is what every plug electrode I’ve ever seen in Canada look like except fine wire plugs, they have a needle.. did you add the notch/groove?
Nice to meet you my brother i like this video! I removed cylinder 1 spark plug and im frustrated because im not comprehending how to read the condition of cylinder 1 spark plug so i can know what is going on inside the vehicle (2003 DODGE CARAVAN SE) engine, can you help me, please?
Can you make a video and help me, I have a Husqvarna two-stroke leaf blower. I have clean the carburetor got a new spark plug check the magneto gap and a new fuel filter and cleaned the air filter and the primer bulb is new. It’s hard to start cold but it will fire up on full choke and then as it warms up it dies off and won’t start back up from there I end up flooding the motor just trying to start it. I hope you can help and have an idea of what’s going on and how to fix it.
I have 125b husqvarna leaf blower,doing the same thing,did a vacuum and pressure test with a mityvac the carburetor would not hold pressure,showed to be the needle leaking,replace the carburetor and it runs great.
own a honda city 2019. mileage only 27000 km , honda dealership recommends to change at 100,000KM / 5 years. pls kindly advice. have no issues changing them as per honda service recommendation... but i would like to know if iridium spark plugs are actually a time based thing. thanks.
I ordered a Husqvarna 128ld. Whenever I got done breaking it in I noticed that it sounded very rich in the low speed needle so being the mechanic I am, I leaned it out and made sure it sounded a bit rich in the high speed needle and it did so I started to use it. Whenever I was done I let her cool off and then I took the plug out to see what type of mixture it was running at. and to my surprise 1/4 of the porcelain was black and the rest was still white. So I tried to richen the high speed a bit more and after holding the throttle fully for about a minute I took the plug out again but it was the same color and instead of it being dry carbon around the threads, it was a bit wet. Does it take more than 30 minutes for the color of the porcelain to change? And also does anyone know the oem specs of the needles?
I am trying to get a Honda 185s Big Red running. It only runs well on choke and the new spark plug after 10 mins of running smelled like burnt electronics? It seems lean? thoughts?
Hello!! I have a Sthil fs94r and it’s revving up then completely shutting off,then takes forever to crank back up and then it won’t rev up at all. Spark screen has been cleaned but didn’t fix anything. Any tips?
Hi can I send you a video of my spark plugs if you can tell me how it's running . I just deleted my catalytic convertor and now it seems it's running to lean and it has slight hesitant and little misfire .when you put under loan only
generator fouling new spark plug instantly with dry black powdery deposits , any ideas , do I need to increase decrease air/fuel mixture have done approx 1800 hrs use?
How were you able to tell if that was oil or fuel on the spark plug? Mine is very wet on the threads like your last one but it was a much lighter color. I was assuming it was oil.
It means that in the air fuel mixture, there is more fuel than needed that results in black soot. This may be due to bigger jets or low float height in the carburettor. Other possibility is, it can also be correct amount of fuel but less air due to clogged air filter which again results in to black soot.
Pulled all 8 of my delco copper plugs from my 5.7 1999 GMC Yukon SLT. All 8 were half bright white and the other half dark in color. Motor has 219k and plugs had approx 9k on them. Is that from leaking spider injectors?
Hello. Can you help me tune the carburetor on the 4t scooter? The problem is in the composition of the mixture, the candle is clean, as if there is not enough fuel, I raised the needle, the level in the chamber is set, the nozzles are clean, the valves are set
When reading plugs should I be starting with a new plug? Like if it’s rich, can I make a carb adjustment put the same plug in and will it show too lean? Or should I put a new plug in?
@@THEMOWERMEDIC1 i just bought the car at 100k mi. I figure it needs plugs changed. Just wondering if changing 3 is gonna causr any problems, to replace the back 3 i would have to loosen motor mounts n tilt engine forward. Its a fwd chevy uplander 08
Thanks for watching! Here is a few tools to help keep those spark plugs in tip top shape!
Have a great day !
Spark plug tester
amzn.to/3paIbzl
Spark plug cleaner
amzn.to/3vKzApy
Spark plug bpm8y
amzn.to/2RT6KoB
On a kohler 18hp twin that's on a craftsman rider if the plug is oil wet than I can assume the rings are bad and engine needs to be rebuilt? Do I need to buy a compression tester?
Good videos Jeremy. A plug can tell you a lot. We used to tune our race engine by looking at the plugs.
remember a 'see thru' plug that you could see the mixture when it fired....always looking for the blue.
Can you do the same with a generator...
Uva
Good video, it always amazes me how so many people never change their air filters.
Small engine mechanic’s are actually better engine tuner’s than most automotive mechanics
Thanks for the compliment I’ve been a small engine mechanic for 30 yrs
said no one ever 😂😂.
There are way more variables to take into account in tuning big engines, specially carbureted engine.
No saying small engine mechanics are dumber, just not in the same level. Anyone who has touched a wrench in his life will know.
It’s like comparing a house electrician with an electrical engineer in charge of the city’s electric distribution systems. 😂😂
@@TrojanLube69less variables means it’s easier to get it right the first time
@@hentaibodypillow250 thanks for proving my point. Just like no one says women are better at pulling someone to have sex than man.
Easier = less skills required.
Dude I have been saying this too people lately and people just kinda looked at me crazy. My arguing point is this I can make a ford,dodge,Chevy run no problem. Now when you start trying to fix a small engine and make it run good/excellent I personally have to go back and do my research. Even then they give me hell
Thanks for the video, I have a 1987 TRX250X with low compression and the plug was fouled out, most people don't associate the two, you're the first video that said a spark plug was fouled from low compression, no I gotta figure out if it's piston rings or bad valve
Wow. Great video. Straight to the point, with clear explanations. You have a gift for teaching. Thanks for posting. Cool Oakley’s. Subscribed.
Quite true, several years ago i changed spark plugs on an i6 and noticed oil on two of them. The engine ran, but definitely less ideal.
I think it's simply because the spark plugs are the only thing easy accessible in the combustion chamber.
01:33 Tad too rich but ok
02:47 Little bit lean
03:22 Low on compression
03:58 Scored piston & cylinder
04:43 Too rich fuel/oil
05:18 Fuel delivery issue
05:47 New Spark Plug
Awesome job explaining whats happening with each plug
I learned a lot from you! My 2016 car sparkplug is still clean at 64k odometer, thank you for sharing this!
it's means it's good....
I always check the spark plugs in the first season . I’ve seen spark plugs that is all black and i always replace the new spark plug in my Echo equipment .I service all my equipment before spring clean up
Excellent !! went even further than I thought.. Much appreciated, I learned a bit here, will need to remember, ty !
Bought a set of plugs at a local parts store and got home only to find the assholes sold me used plugs and of course I couldn't take 'em back. My fault for not going over each box. Lesson learned.
Thank you so much I really never knew how to read different scenarios . Very helpful :)
My old Honda gx110 has a black oily looking plug. It burns some oil but still runs good. The exhaust smells like there is too much unburned fuel sometimes.
That is very good information thanks for sharing this…👍👍👍
My spark plugs are like me. Old and worn out. The plugs say it's not them it's the ECU. What should I do? Replace the plugs or the truck 🤔 To old to walk far so the truck better start running soon. 🛻🏃🚶🚶
Thank you sir. On my way to my dealer for an explanation after 1700 miles and one plug that looks like the second to last one, wet below the nut on gap side. 2020 Fat Boy
Hi, What was the issue?
@@jonaaa6059 from Harley, it was a river in Egypt and a hands off statement due to the fact I did my first maintenance with a Harley tech who just opened his own shop. My assessment was faulty piston rings causing a type of blow back coupled with the engine burning rich. Finally a possible faulty install.
So far, no issues with the replacement Screaming Eagle plugs and wires.
Love the video man. Not many engine guys read plugs these days!
This was fascinating. You remind me of hanging out with my dad in the garage. Love your videos.
I have a mudbuddy 5500 they use vanguard engines got 2 carbs spark plug are always black motor runs good idle perfectly starts really easy I leaned my carbs low as they will go still same thing spark plugs black and dry after few minutes of running
not sure what you mean by fuel? Those spark plugs have oil on the threads but not sure why you didn't talk about them
I enjoyed your video but you didn't really seem to explain why. The spark plug with low compression you said had the correct fuel mixture. What on that spark plug told you the fuel mixture was correct and the compression was low. Would not the same spark plug be an indication of too rich of a mixture? If so how can you tell the difference
Just a suggestion, but can you also show what a perfectly running plug should look like? Thx.
Agreed
Nice plug tutorial chap, thanks.
Awesome. Thanks so much. What’s your method of cleaning plugs?
Don’t. Just replace. They are cheap
Well damn it man guess what I'm going to do I'm going to go pull some plugs and watch the video again and see where I'm at. My wife's going to help we were both watching thanks here we go. I want Cocoa Brown
Is it normal for the thread to have a bit of engine oil?
Thank you for taking the time to show us all of the bad ones. But what about showing what a good spark plug looks like?
Hey I just bought a boat and the plug gaps were from 0.35 - 0.48. This is from a v6 . I just changed the plugs , when should I pull the plugs just to see how the engine is running ?
this was super helpful, thank you!
I have a problem with a lawnmower where it runs but idles somewhat rough, and it won’t cut grass that well. I took the spark plug off and it was wet, cleaned it off, put it back in but the same thing happened spark plug was also wet again.
Awesome information and diagnosis of spark plugs & possible engine performance as a result of inspection. Well done!
you should actually show as well a good old spark plug, as an example of a good looking engine with old used spark plug, so people can judge a good from bad engine
I wish I could send you a picture of my banshee spark plugs LMAO 😂🤣😂 one burnt the tab smooth off and packed it full of aluminum!
Thank you for a Spanish commercial even though I'm on English
Great for moped engine / fuel mix diagnosis!
I bought a bike that has been sitting for 10 years and when I got it the oil was all black as well as the spark plug all black and full of soot. What do I need to do before replacing the spark plug with a new one? Should I clean the inside where it sits or spray it with something first? I've changed the oil and gas and cleaned the carb. The bike ran very bad before and died when reaching 4:th gear after some time and when riding it for a while. So I have it taken apart now since I will be replacing the petcock since it was leaking.
Good video, lots of great info. Quick question, do you think its ok to use a Champion plug RCJ6Y in place of a NGK BPMR8Y that I removed from an Echo leaf blower? The plug I took out was dry with a redish brown color. Thanks
thanks. It would be useful to see how a good used spark plug looks like.
Very nice video; keep up the good work
I have a Honda Car with 1.3 IDSI engine having 8 spark plugs. The engine is powerful but the only center two spark plugs get really black after one week driving. I replaced old park plugs with new NGK spark plugs but the problem is same.
Can you kindly guide which is causing this issue?
A rich issue ? Leaking injectors ? Someone needs to diagnose it .
do you prefere the v groove over the flat spark plug
The first one, the acceptable one.. That is an interesting electrode.. what brand plug is that?
The brand new cmh is what every plug electrode I’ve ever seen in Canada look like except fine wire plugs, they have a needle.. did you add the notch/groove?
Sir my i ask ? My side electrode is black my center electrode is white? What do you think? Thank you for your answer God bless
Nice to meet you my brother i like this video! I removed cylinder 1 spark plug and im frustrated because im not comprehending how to read the condition of cylinder 1 spark plug so i can know what is going on inside the vehicle (2003 DODGE CARAVAN SE) engine, can you help me, please?
A couple plugs have a little bit of oil on them? What could that mean? Valve stem seal? Cover gasket?
Can you make a video and help me, I have a Husqvarna two-stroke leaf blower. I have clean the carburetor got a new spark plug check the magneto gap and a new fuel filter and cleaned the air filter and the primer bulb is new. It’s hard to start cold but it will fire up on full choke and then as it warms up it dies off and won’t start back up from there I end up flooding the motor just trying to start it. I hope you can help and have an idea of what’s going on and how to fix it.
I have videos in my 2
Stroke playlist. Sounds like the carb is
Flooding. I’d replace it but before
I did that I’d do a crankcase vacuum test
@@THEMOWERMEDIC1 ok thanks I will do that
I have 125b husqvarna leaf blower,doing the same thing,did a vacuum and pressure test with a mityvac the carburetor would not hold pressure,showed to be the needle leaking,replace the carburetor and it runs great.
own a honda city 2019. mileage only 27000 km , honda dealership recommends to change at 100,000KM / 5 years. pls kindly advice. have no issues changing them as per honda service recommendation... but i would like to know if iridium spark plugs are actually a time based thing. thanks.
Hello sir. I have a 2 stroke dirtbike. Has good compression. But the plug is saturated. You think the carb is the issue? Thanks.
Does spark plug really increase power comparing two different sparkplug and bnew condition?
I ordered a Husqvarna 128ld. Whenever I got done breaking it in I noticed that it sounded very rich in the low speed needle so being the mechanic I am, I leaned it out and made sure it sounded a bit rich in the high speed needle and it did so I started to use it. Whenever I was done I let her cool off and then I took the plug out to see what type of mixture it was running at. and to my surprise 1/4 of the porcelain was black and the rest was still white. So I tried to richen the high speed a bit more and after holding the throttle fully for about a minute I took the plug out again but it was the same color and instead of it being dry carbon around the threads, it was a bit wet. Does it take more than 30 minutes for the color of the porcelain to change? And also does anyone know the oem specs of the needles?
Very valuable info. Thank you
I am trying to get a Honda 185s Big Red running. It only runs well on choke and the new spark plug after 10 mins of running smelled like burnt electronics? It seems lean? thoughts?
Hello!! I have a Sthil fs94r and it’s revving up then completely shutting off,then takes forever to crank back up and then it won’t rev up at all. Spark screen has been cleaned but didn’t fix anything. Any tips?
Hi can I send you a video of my spark plugs if you can tell me how it's running . I just deleted my catalytic convertor and now it seems it's running to lean and it has slight hesitant and little misfire .when you put under loan only
Does this logic also apply to 2 stroke engines ? Or are we talking about 4 Stroke only ?
Nice video Jeremy, you have sparked my interest. Ha!!
generator fouling new spark plug instantly with dry black powdery deposits , any ideas , do I need to increase decrease air/fuel mixture have done approx 1800 hrs use?
Very helpfull, thanks!
How were you able to tell if that was oil or fuel on the spark plug? Mine is very wet on the threads like your last one but it was a much lighter color. I was assuming it was oil.
it is
wonderful, thank you for this video brother
I have a question my evinrude 200 2 stroke outboard it has some oil on the spark plugs it looked wet but very light is thrat something alarming
When mechanics say an "engine is running rich" what does that mean in layman terms
It means that in the air fuel mixture, there is more fuel than needed that results in black soot. This may be due to bigger jets or low float height in the carburettor. Other possibility is, it can also be correct amount of fuel but less air due to clogged air filter which again results in to black soot.
Pulled all 8 of my delco copper plugs from my 5.7 1999 GMC Yukon SLT. All 8 were half bright white and the other half dark in color. Motor has 219k and plugs had approx 9k on them. Is that from leaking spider injectors?
😮..what did u figure out .mine are like tat too
@@robertroberts9782 running rich.
Can you tell the sex of the person operating the equipment?🤪 great video!👍🏻
I used a wd-40 in cleaning a spark plug, what i the effect if i repeated it more frequently?
No harm will be done. I use carburettor cleaner and a toothbrush to clean my spark plugs, then use compressed air to finish off the cleaning process.
Mid to dark grey or Cocoa/tan is good ;)
Hello. Can you help me tune the carburetor on the 4t scooter? The problem is in the composition of the mixture, the candle is clean, as if there is not enough fuel, I raised the needle, the level in the chamber is set, the nozzles are clean, the valves are set
Ah thanks for sharing that.
Is the last one rich on oil or rich on gas pu rich on both?
Any idea why your last few videos show up and then switch to "Private" and can't be viewed?
Why not just clean and adjust the gap why replace if its still good?
Excellent video. New subscriber!
Thanks for the sub new videos coming soon
I'm bad for never changing spark plugs
What about a plug that quickly goes to charcoal black?
This guy is awesome
great vid. Thank You
When reading plugs should I be starting with a new plug? Like if it’s rich, can I make a carb adjustment put the same plug in and will it show too lean? Or should I put a new plug in?
How come top radiator hose never has a pressure on it an gouge go to one temp an stay never even barely moves
Perfect...Thanks
Right on!!
Good info bro cheers
Should also show a plug from a good engine
They are all good engines🤷♀️
Good times..👌
So if there’s nothing on the plug that probably means I’m not getting fuel?got spark
Thanks for all
Very interesting
Low compression issue is my engines problem then.
SUPERB!!
Awesome
A spark plug is the "sole" of an engine.
Show the top end of the plug will ya!
😂
Good video but should have compared it to a well tuned one instead of a new one
The first plug I showed was about as good as you’re going to get with a dirty old two cycle engine
Common issue here is ngk plugs upgrade ya plugs .
Don't you think it would be valuable to show what a used plug that was in a good running car should look like?
Most def.
Omg my 4 spark plugs are all different and each one like on of these… ☹️
My motor ihave changing some prugs but misfire
❤❤❤❤❤❤
Can i replace only 3 out of 6 plugs? 3 are hard to get to
Why would you only want to change three?
@@THEMOWERMEDIC1 i just bought the car at 100k mi. I figure it needs plugs changed. Just wondering if changing 3 is gonna causr any problems, to replace the back 3 i would have to loosen motor mounts n tilt engine forward. Its a fwd chevy uplander 08
Sparks don't lie