Great video dude!!! Well explained and you literally walked through every step by step and I will be changing my sensors on Friday. I changed my coils and spark plugs myself and thanks to your video I will do my B1 S2 this week. Much appreciated for your time and upload.
Hi, Is the bank 1 & 2 the same on a Audi Q7 TDI v6 3.0-Ltr, I need to change the sensor 1 on bank 1 but not sure if its on the right or left side. Thanks
EDGEMOTORS This is exactly why I asked you :-) i have almost everything out but i can't even feel them, should I take the intake out? will it make it easier? and do you think it's worth it to replace the oil housing gasket or it's no big deal thanks.
It may send rich or lean oil into your engine which will eventually destroy the engine. Change the O2 sensors so you get a good amount of fuel in your engine for a healthy car
damn what a great video. man thanks for explanation. Спасибо за обьяснение - у самого ауди а6 4.2 эти блядские официальные дилеры в Киеве меня заипали - как не заедешь попадалово на деньги, сказали банк 1 сенсор 1 - а номер запчасти не дали. вот сижу лажу в нете ищу что за банк 1 сенсор 1. видимо со стороны пассажира перед катом. В общем большое спасибо за видео! много чего полезного смотрю.
I want to use a O2 Sensor Fouler because my Bank 2 Cat is dead.I see people putting them on sensors underneath the car. I do not see any sensors under my A6 ‘05 Quattro
EDGEMOTORS EDGEMOTORS Okay so sensor 2 is the correct place to put the fouler ? I was just confused because everyone that installed foulers on RUclips out them under the car. On the audi its in the engine bay ?
Sup hows it going, i need help looking for the sensors for the 2009 a5 quattro 3.2L i have the same problem check engine is on and scanner says i have to change bank 2 sensor if someone can plz help would be really appreciated
Thanks for your video. I have an Audi A6 3.0 Quattro. Code P0050. If the location is the same as yours? Bank2 Sensor 1? some one told me it's on passenge side. Please tell me the correct sensor and location, I want to replace it by myself. Thanks.
EDGEMOTORS what does B1 S1 mean? guessing bank 1 or RHS of car? Not sure about S1.... emission light came on and Vagcom diagnostic states fault is Oxygen sensor heater circuit. Have you got part number of OEM or Bosch lambda sensor for a 2004 model year A6 Quattro using 3.2L petrol engine? Cheers.
hey i have been following your videos for about a year now and they have been helpful however i know you cant cover everything i got code p0023 and p0068 can you help? its 2006 a6 3.2
Lots of one handed work, that's not as easy as you make it look. Thank you for your efforts to help us. Your videos are clear and very helpful.
Great video dude!!! Well explained and you literally walked through every step by step and I will be changing my sensors on Friday. I changed my coils and spark plugs myself and thanks to your video I will do my B1 S2 this week. Much appreciated for your time and upload.
Thanks bro I finally got my brothers car running again keep making great videos
Was it like it wanted to cut off sputtering or misfiring
You are GOOD,working with only one hand!
Very clear explanations. Thanks.
Great video brother you should def make more videos thanks
Would you please show us how to disconnect wire harness?
Hey hello! Sorry for my english but is the same operation for the v8 3.7 audi a8? Thank you!
Have no idea, never seen a 3.7 a8
Hi, Is the bank 1 & 2 the same on a Audi Q7 TDI v6 3.0-Ltr, I need to change the sensor 1 on bank 1 but not sure if its on the right or left side. Thanks
Great Video! Is it easy to replace the oil filter housing gasket? it's leaking oil and needs a replacement. Thanks.
Only 4 bolts and oil pressure sensor... but good luck to get to them:)
EDGEMOTORS This is exactly why I asked you :-) i have almost everything out but i can't even feel them, should I take the intake out? will it make it easier? and do you think it's worth it to replace the oil housing gasket or it's no big deal
thanks.
It's not too bad, some stuff is in the way but you can do it, just be patient and don't get impatient otherwise it becomes a PITA.
@@ali1t PITA ? 🤔
@@whamalek pain in the ass, it's relatively simple though in hindsight, you don't need to take off the intake manifold.
Thank you! I got a 3.2 and theres no videos for anything..
Same here, it can be frustrating.
Link for purchasing these two sensors inexpensively? Or at least the type and model numbers for them so we can look for them online? Thanks!
Nice video , do you have one for 07 a6 4.2?
So total four O2 sensor in 3.2FSI?
If you don't change them, other than emissions - is there any additional harm by not changing them?
It may send rich or lean oil into your engine which will eventually destroy the engine. Change the O2 sensors so you get a good amount of fuel in your engine for a healthy car
Thank u for this video🙌🏼💪💪💪
Awesome video! how many sensors does 2009 Q7 need (upstream and downstream) and can i used the Bosch universal "Bosch 15733" sensor? thanks
I would only use oem sensors
The Q7 has 4
@@EDGEMOTORS thanks for your prompt response. Are these sensors the same or are they different for upstream/downstream?
damn what a great video. man thanks for explanation. Спасибо за обьяснение - у самого ауди а6 4.2 эти блядские официальные дилеры в Киеве меня заипали - как не заедешь попадалово на деньги, сказали банк 1 сенсор 1 - а номер запчасти не дали. вот сижу лажу в нете ищу что за банк 1 сенсор 1. видимо со стороны пассажира перед катом. В общем большое спасибо за видео! много чего полезного смотрю.
Great video, by any chance do you have one for BMW E60?
Amazing video!
Do you know if the 2009 has the same location?
Yes they are
Great vid,,,, but how about a challenge,,,, where are ALL of the oxygen sensors for a 2003 a6 2.7 Quattro ?
I want to use a O2 Sensor Fouler because my Bank 2 Cat is dead.I see people putting them on sensors underneath the car. I do not see any sensors under my A6 ‘05 Quattro
This video would be the guide for that
EDGEMOTORS EDGEMOTORS Okay so sensor 2 is the correct place to put the fouler ? I was just confused because everyone that installed foulers on RUclips out them under the car. On the audi its in the engine bay ?
The second o2 cracks the cats, that’s the sensor they all put the fouler on... but it doesn’t always work...
EDGEMOTORS What do you mean by the 2nd o2 cracks the cats ? And your saying that the fouler may not clear my CEL ?
Sorry typo... checks the cats
And yes it may just give you a different code, o2 sensor response too slow, or no activity
I have to do on my s4 4.2 you Thing it's hard to change?
Awesome 👏🏾 video
After replacemwnt mybo2 sensor in audina4 b7 engine fault appear in dash, o2 swnsor code fault, how to reset ecu in audi
Sup hows it going, i need help looking for the sensors for the 2009 a5 quattro 3.2L i have the same problem check engine is on and scanner says i have to change bank 2 sensor if someone can plz help would be really appreciated
I can't find the sensors on a 05 a8 are they in same location?
no they not... just follow the exhaust, they will be there:)
Found it very hard to get to but thanks 👍
Do you know if the crankshaft posisition sensor is by the driver tire like other audi for a 05 a8l
Yes it should be there
Thanks for your video. I have an Audi A6 3.0 Quattro. Code P0050. If the location is the same as yours? Bank2 Sensor 1? some one told me it's on passenge side. Please tell me the correct sensor and location, I want to replace it by myself. Thanks.
the bank 2 is on the driver side... which of 3.0 cars doo you have?? is it naturally aspirated or supercharged???
EDGEMOTORS
2003 Audi A6 3.0L Quattro, 4 door sedan. I think it's naturally aspirated.
EDGEMOTORS what does B1 S1 mean?
guessing bank 1 or RHS of car?
Not sure about S1.... emission light came on and Vagcom diagnostic states fault is Oxygen sensor heater circuit.
Have you got part number of OEM or Bosch lambda sensor for a 2004 model year A6 Quattro using 3.2L petrol engine?
Cheers.
I have the same exact one 2003 audi a6 3.0l base. Where are all of the o2 located?
You in for a treat.... some of them not so easy to get to...
Thanks really good tuto
Where do u get the oxygen sensors ebay has all the wrong parts
+Namibia
Only oem original sensors should be used... you will only have problems with aftermarket parts...
Autodoc or local supliers
Ya you only do easiest ones only try doing a bank1 sensor
Can anyone explain which sensors are upstream and downstream?
Upstream are the sensors before the first cats. Down stream are the once after...
+EDGEMOTORS thanks
+Tyler Murphy np
Very nice video
Which one is downstream and upstream?
10/10
hey i have been following your videos for about a year now and they have been helpful however i know you cant cover everything i got code p0023 and p0068 can you help? its 2006 a6 3.2
When you do a bank 1 sensor1 let me no you only do the easiest ones
мне показалось или там по русски болтали на заднем плане?
i could even do it even if i had 4 hands
Audi is World worst design for maintenance