En este video vamos a limpiar el molinillo Lelit PL043MMI Fred. Equipment : Lelit PL043MMI Fred DeLonghi Dedica EC685 Bottomless portafilter 51mm. Camera: Canon 700D + Canon 50 mm
Tips on getting the bottom plastic part of the hopper clean? Its very hard to reach.. Now that part of mine is discoloured. The angled "protection" part where the screw sits.
Hi, just noticed I don't have the little 2 screws front plate on??? Also my grinder is doing a weird scrubbing noise at the end of grinding coffee, is it an issue ???
Hi! , my grinder doesn't make any noise at the end of grinding coffee. As for the dial, I have always noticed that's difficult to turn that part. I imagine it would be normal.
Thanks for the video! I followed the same steps and after putting together the pieces, the grinder no longer grinds, I can only hear it buzzing. The black item seems to be stuck and I cannot change the fine/coarse setting... Any suggestions on how to fix this?
Muchas gracias por el vídeo, me ha sido muy útil para limpiar la mía. Quería hacerte una pregunta para saber si te pasa lo mismo o es cosa mía. Me resulta imposible hacer una molienda gruesa, mi máquina solo muele o fino o muy fino. He probado con todo tipo de ajustes y nada… ¿A ti te pasa? Saludos y gracias!
@Santipereza Gracias por el comentario!! 😊. Normalmente no suelo hacer moliendas gruesas ya que la utilizo principalmente para expresso, pero alguna vez he probado a hacer una prenda francesa y no he tenido ningún problema, simplemente gire el dial al máximo y todo bien. Un saludo.
hi, please please help me with Lelit Fred 044 mmt, i am not able to find the respective video and the local service company refused to repair it , as the device was purchased on Amazon, not from that company.. The grinder differs from 043 version and I am afraid to start disassembling without instructions. As usual something stuck in mills, engine works, they dont rotate
@Tatyana12Inc Hi, if you purchased the product on Amazon and it is still within the warranty period, it's better to contact Amazon. In principle, the way the grinder is disassembled should not affect the motor, as there is no access to it and no possibility of anything getting inside. Therefore, I recommend relying on the warranty.
That was a very helpful and clear. Thank you a punch.
Helpful video, thanks!
Nicely done!
Loved that San Jorge Coffee Roasters sticker :D
Gracias, me has salvado
Tips on getting the bottom plastic part of the hopper clean? Its very hard to reach.. Now that part of mine is discoloured.
The angled "protection" part where the screw sits.
What number do you set the hopper back to? If closing the burrs back almost touching, do you set to 1?
What setting do you use for French press please?
Czy wiesz może czy jest jakaś metalowa podkładka między plastikowymi łopatkami a stożkowym żarnem?
I forgot, even after full cleanup, dial (upper burr) is still rrreally hard to turn (by hand, I needed a glove), someone got it ?
I don't understand how you can be sure to mount the wheel at the original position.
Does anyone use this grinder with a Breville portafilter ? Does the Breville portafilter work with the Lelit Fred grinder ?
Wiesz może czy między tymi plastikowymi łopatkami a żarnem jest podkładka? Bo muszę wymienić oś i jedna podkładka mi wyleciała i nie wiem skąd
Hi, just noticed I don't have the little 2 screws front plate on??? Also my grinder is doing a weird scrubbing noise at the end of grinding coffee, is it an issue ???
Hi! , my grinder doesn't make any noise at the end of grinding coffee. As for the dial, I have always noticed that's difficult to turn that part. I imagine it would be normal.
Thanks for the video! I followed the same steps and after putting together the pieces, the grinder no longer grinds, I can only hear it buzzing. The black item seems to be stuck and I cannot change the fine/coarse setting... Any suggestions on how to fix this?
The same has happened to me. Were you able to fix it somehow?
Same thing has just happened to me. Did you fix it?
yeah ok, my dad's grinder is having the same issue. I can't move the fine/course wheel at all. Did anybody find a way to fix this?
Muchas gracias por el vídeo, me ha sido muy útil para limpiar la mía.
Quería hacerte una pregunta para saber si te pasa lo mismo o es cosa mía. Me resulta imposible hacer una molienda gruesa, mi máquina solo muele o fino o muy fino. He probado con todo tipo de ajustes y nada…
¿A ti te pasa?
Saludos y gracias!
@Santipereza Gracias por el comentario!! 😊. Normalmente no suelo hacer moliendas gruesas ya que la utilizo principalmente para expresso, pero alguna vez he probado a hacer una prenda francesa y no he tenido ningún problema, simplemente gire el dial al máximo y todo bien.
Un saludo.
How does this grinder go for espresso? I’m after a small machine on a tight budget.
Perfectly
hi, please please help me with Lelit Fred 044 mmt, i am not able to find the respective video and the local service company refused to repair it , as the device was purchased on Amazon, not from that company.. The grinder differs from 043 version and I am afraid to start disassembling without instructions. As usual something stuck in mills, engine works, they dont rotate
@Tatyana12Inc Hi, if you purchased the product on Amazon and it is still within the warranty period, it's better to contact Amazon. In principle, the way the grinder is disassembled should not affect the motor, as there is no access to it and no possibility of anything getting inside. Therefore, I recommend relying on the warranty.
i just got that grinder how do you like it.
It's a good entry level grinder, enough to get a good expreso.
Hey! What should i do if i forgot to put the screw where it was on that black black wheel? So now i don’t remember where it was initially?
hi!! the black wheel screw is simply an extra marker for your grinding point. so, adjust your grinding point and place it where you see fit. 🙂
Why the hell my Lelit Fred dont have autometric button, the power button is on the side instead of in the back? Did lelit scammed me?
👌 P-R-O-M-O-S-M!!
Can you unscrew the portafilter holder? I find it annoying.
Sadly not. Tried it but it’s molted together with the button part. Absolutely trash design that part.
Lelit makes fantastic espresso machines ... their grinders are extremely bad and expensive .. at 250 euros to use it for a single year ...