Make a Stand for My Infinity Cube

First I made my Infinity Cube, now here is how I built the stand for it.
My Instructables Link:
➞ www.instructables.com/id/Make...
Dont forget to watch my Infinity Cube video!
➞ • Make an Infinity Mirro...
Here is a link to my second RUclips channel:
➞ / @hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Here is what I used:
Tools
-----
Pencil (amzn.to/2Tu9O63)
Straight Edge Ruler (amzn.to/2GmKE5m)
Angle Finder (amzn.to/2KBHZ9r)
Hand Saw (amzn.to/2TE8tcT)
Sanding Block (amzn.to/2G9qeOi)
Dremel (amzn.to/2VfvXVK)
Bit #115 (Carving Cylinder, amzn.to/2qsRxg3)
Small Files (amzn.to/2XNHOhE)
Drill (amzn.to/2LWBoJr)
Drill Bit 1/16" (amzn.to/2GRxxtb)
Drill Bit 3/8" (amzn.to/2QzMzIU)
Drill Bit 1/2" (amzn.to/2SXh4cK)
Soldering Iron (amzn.to/2oK9Xrh)
Wire Cutters (amzn.to/2CXnZd1)
Wire Strippers (amzn.to/2qsRot1)
Pliers (amzn.to/332X22i)
Sharpie (amzn.to/2U2kf56)
Multimeter (amzn.to/392BPJs)
Parts
-----
1 1/4" Square Dowel (Red Oak)
Touch Sensors (amzn.to/37RPamL)
Arduino Nano (amzn.to/32ZofTl)
Thumb Tacks (amzn.to/2TdNYHW)
22 Gauge Wire (amzn.to/2OnshRK)
16 Gauge Steel Wire (amzn.to/2XchFY9)
3/8" Ring Magnets (amzn.to/2EaHZum)
Supplies
-----
60 Grit Sandpaper (amzn.to/2DlX34n)
Painters Tape (amzn.to/2Q05ZEC)
Solder Flux (amzn.to/38641u0)
Lead-Free Solder (amzn.to/2GD3asQ)
Lead-Based Solder (amzn.to/3z49TS6)
Wood Glue (amzn.to/2vxzR2n)
E6000 Glue (amzn.to/2LDg3oD)
Wood Filler (amzn.to/2EjGXvY)
Chrome Color Paint (amzn.to/37ldUVc)
Heat Shrink Tubing (amzn.to/3c94zSZ)
Wood Oil (amzn.to/2HY688w)
Paper Towels (amzn.to/2T204C9)
-----
▽ Follow Me:
➞ Twitter - / howdoyoudiy
➞ Facebook - / howdoyoudiy
➞ Instagram - / howdoyou.diy
➞ RUclips Second Channel - / hdydiy
-----
▽ If You Would Like To Support Me: (optional)
➞ www.buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ • Lost Sky - Dreams | Tr...
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ • Lost Sky - Dreams pt. ...
-----
▽ Follow Lost Sky:
➞ Facebook - / lostskydiary
➞ SoundCloud - / lostskydiary
➞ Instagram - / lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - / saraskinner
➞ Facebook - / saraskinnermusic
➞ Twitter - / hisaraskinner

[@DiyResinArt]

Your video is very good, wish you success,
Those who read my comment are also fortunate
😍😍😍

[@HowDoYouDIY]

Thanks, I'm glad you liked it!

[@varavadheva9561]

Noicee

[@HowDoYouDIY]

Thanks!

[@simianas3884]

Um, Can You Make One For 3x3 Rubik's Cube, You Know with A4 Paper, Please

[@HowDoYouDIY]

Sounds like an interesting idea, I'll have to look into that.

[@HowDoYouDIY]

I have created a GitHub page that has the Gerber files for the Custom LED Strips and the Arduino Nano code.
You can find all of that here: github.com/HowDoYouDIY/InfinityCube
I would love to know what other functions and features you would like to see with the lights!