Awesome job. I'm absolutely thrilled to be any degree of inspiration for this. Also sorry for pushing the drug that is FPV on you. I can't believe you cut that frame by hand. I take the same approach as you in making whatever I can myself and have been down that path so I feel your struggle. very excited to see future videos.
@@TrentTationnaiseXization advice for recovery? Unfortunately Samm is no longer with us. I think about him often and am so so sad to have such a capable talent leave us.
I did almost the same thing, except after buying a bunch of frames. Making something you can fly at home is amazingly rewarding! Also if your ecs's can run Multishot you can change the startup beeps to 3 other sounds. Cheers!
Sweet video, I'm impressed that you jumped right in and designed your own frame! And I know this was a while ago, but your friend asked if you can have a different jingle when your ESCs armed. Well, now with the latest BLHeli_S you can! 🙂
well done and keep at it. that power train should absolutely scream. the raptors are great and so are the FCs you could even run tri-blades on that system for massive gratification.
Hey man great video! One thing of note: you are using really good components minus the ESCs, which make the biggest difference in how the quad flies. If you're interested in upgrading, the favorite littlebee 20a ESCs only cost about $14 a piece and will perform far better.
Nice job dude, clean build. I recommend a pigtail extension for your expensive VTX though, I just killed a 200mw immersion not doing so. Also wanted to add that if you have trouble putting it down gently because it's just got tons of power, a slightly more shallow throttle curve for that bottom 20 or will help give more resolution there but still feel the same for flying.
Nice work. I did a similar build, but out of basswood. It was pretty light and very cheap, though it couldn't compete with carbon fiber. I'll see if I can get access to a CNC machine eventually.
You are awesome and never fail to interest me enough to focus 100% on your videos. Always clever and interesting. P.S.: Your channel is one of the best practical RC/Airplane/Quad channels on RUclips...
Wish I had the drawing to make that frame it had the rare propriety of looking unique in the sea of similar looking frames but sadly I don't think I will be able to and has inspired me to design my own frame. R.I.P Samm
couple things, 1, great job building from scratch and using the manual testing rather than the digital :D 2, you will get a better video signal if you get decently made antennas, i have used the same type as you showed, i had reception issues until i got a set made by someone on RCgroups, then i could fly farther than my radio i think :P 3, tie down EVERYTHING, it might not look like the esc can reach the prop, but it will find a way.... 4, have safe fun!! keep us posted Samm
First of all, Great Job!! I must however say I was shocked to see the CF being cut, sawed, and drilled with no dust management system. a 2 micron system is needed to protect your young, brilliant lungs from irreversible damage from the CF dust. 2 micron solutions are available cheap and decent systems start less than 300 from Harbor Freight & others. Please do a little research to become familiar with the risks you are taking. All the best to you. Your designs are very nice. be well sir.
I choose to mill my frame as my first project on CNC mill i used 2mm PCB mill (10 pcs for 10E) on homemade CNC mill and result was flawess, try propper millbits... and glue carbon plate to wood or mdf plate with doublesided tape.
Wait, so how much did everything cost all together? I'd like to think the one I build was "budget" at ~$400, but I'd like to know what yours was so I can compare.
You can send your design off somewhere and have it cut for you. Takes a couple weeks to a month turnaround depending on who you go to. I've had good experiences with this.
It was mostly a learning experience and an excuse to use the CNC's. But I definitely see that outsourcing would be the best way to produce and sell these.
I don't necessarily sell them. Any I've sold I've made 0 profit. I just like to apply my own ideas and enjoy it when other people want to use my frames as well. My idea of a frame was quite different than most stacked plates so I just HAD to try it. No excuse needed to create stuff!
good job on this, i really enjoyed it. one thing that you might want to do is put some double sided tape on the bottom of the esc so if you brush past a branch it doesn't tear it off
Hello, could you make a pdf file or something with every single parts you used to make the body? It could be so cool, I totaly love your design but I don't know much about quads
I know nothing about drones, but wouldn't it be better to put the camera on a rotating frame on the drone? It would make it all heavier but that way you don't have to maneuver the whole drone when you want to turn
Very cool demo. I didn't know so many things could go wrong with a cnc machine. Could it have been the rigidity of the carbon fiber? Thank you for the video.
dude u put 20 a esc but most of the youtubers says that put that esc in which 20% extra remaining amperes like 30a and even if we pair a 20a esc with a 2205 2300kv motor with 3s the max draw current is around 19.2.... so maybe the chance of burning esc simple the question is that can we pair the 20a esc with 19.2a max draw current motor is it safe ?
I did consider making some elaborate shapes to take advantage of what a 3d printer can do but: 1. easy to model 2. Accurate dimensions to test how things will fit with a flat plate of carbon. This prototype model wasn't meant for structural performance. 3. The way a 3d printer builds flat floors and ceilings is pretty strong compared to non-planar surfaces
Love it. Your videos are always great. Are there any interesting physics properties you were paying attention to with the design or were you just going with whatever looked cool?
Mostly the looks, and ease of fitting things in there. I did make sure to use nice curvy shapes for structure so that the stress lines wouldn't get pinched. And the front arms are a little beefier.
Dude I love it!! So cool and the Color scheme red and black my favorite are u selling the design of it ? The 3D printed one I want one so bad just like that red and black soo cool
I've alsow build a cheap Quadcopter with the same motors, ESCs and props. But I mounted the ESCs below the prop, so they are cooled all the time. They don't even get hot. My Battery (20C 5000mAh 3s) gets warmer than the ESCs and the motors, even when I fly fast. But I alsow had some problems with the ESCs. I bought 6 of them. Two work perfectly fine, two spin the propellers extremely slow sometimes, so you cant's start and two simply stopped working a few seconds in flight, witch caused some crash's.
Bro you need to sell these.. make some different sizes and you could make a living just doing this. maybe a kickstarter. just a suggestion what 3-d printer do you use ? Take care and keep flying.
hey- i'm looking into running a drone webcam to vr goggles for a person who is visually impaired... where did you get your webcam and gear at.... any advice would be appreciated. Not making a drone just webcam to vr googles.
How much would it cost me to build one from scratch? I don't have any RC or FPV equipment, so that'd have to be included in the price too. I'm just intertested in the ballpark figure, like is it $300 or $1000?
You could do it for around 300 to 400. Though good FPV goggles are already that much by themselves. I'd also recommend getting a little cheerson cx-10 just to get your brain understanding how to control the things. Will make flying the expensive stuff much easier.
Yeah I really want to buy a 3d printer and a CNC Machine and build my own quad. I especially want to build a nylon canopy for my GEP-LSX6 and hopefully loose 100 grams.
With Armattan Productions you submit a design to their website (armattanproductions.com/). They will verify the design (check to see if your not stealing someone elses design) that will take a couple of days. After this they will tell you the price at which they will sell you the design (their prices are very competitive). Then you can set up a shop on their website where they can sell you the frame for whatever price you would like that is above the cost of the frame. You can then purchase the frame for yourself. As far as carbon goes, they will use carbon fiber from 1mm to 5mm and they only use the highest quality carbon fiber. As far as selling the frame goes if it is unsuccessful it wont cost you anything to sell the frame so you have nothing to lose. The frame also looks super durable so if you got the price low enough it could be a good first or learning racing frame. If you have any other questions go to armattans productions website and you can find more answers there. Best of luck!
wow, I have a CNC and I would really like to cut my own drone but I would like to know where did you buy your Carbon Fiber and what thickness is required?
+shodanxx I don't know of a good supplier at this time. just ordered one sheet quickly from Amazon. Not cost effective. Do let me know if you find one!
I did a survey of what was available on ebay. Looks like the best deal is 200mm x 300mm sheets (0.5mm in particular). Here are the best prices I could find for each thickness 200mmx300mmx0.3mm 7.87"x11.81" 93in^2 11.16$ 0.120$/in^2 200mmx300mmx0.5mm 7.87"x11.81" 93in^2 9.20$ 0.099$/in^2 200mmx300mmx1.0mm 7.87"x11.81" 93in^2 13.39$ 0.144$/in^2 200mmx300mmx1.5mm 7.87"x11.81" 93in^2 15.15$ 0.163$/in^2 200mmx300mmx1.5mm 7.87"x11.81" 93in^2 15.43$ 0.166$/in^2 200mmx300mmx1.5mm 7.87"x11.81" 93in^2 23.06$ 0.248$/in^2 You can get 100x500 200x300 but 300x300 or 500x500 is much more expensive and rare, likes 0.7$/in^2 I haven't done the survey, but seems carbon fiber rods of all sizes are available very cheaply. hollow rods and square tubing is also available but it seems there's less choice and it is significantly more expensive. On thing that strikes me about you design and most quad copter is, the "back plane" is in the wrong orientation ! Like , the motor tabs, they would be a LOT stronger in the direction they need to be if they were rotated 90 degrees !? Do you know good ways to connect pieces of carbon fiber together that is as strong as the carbon fiber elements themselves (and without weighting too much more) ?
Hi sam i need your help...how can i calculate the C rate for my lipo.?? which is the c rate that i need in order to prevent the damage of it ...if my motor squeze the batery..high drain of current and low c rate..i hope to be clear with my question..thanks for your video they help me a lot.
The capacity multiplied by the c rating of the battery gives you the maximum current they the battery can safely deliver. Or so that's the theory. So 1000mah (or 1 amp hour) times 70c is 70 amps max current draw
+Goorc yea there are super cheap Chinese frames out there. I'm just irrationally addicted to doing things myself. Making things with my own personality in them. Mostly for all that I learn in the process.
+Maniacal Cactus I used rhinoceros, but Google sketch up or Fusion360 are both good (and free!) fusion is also what I used to generate G-code for the CNC
![Ice On My Teeth - ATEEZ エイティーズ 에이티즈 [Music Bank] | KBS WORLD TV 241115](http://i.ytimg.com/vi/c-n92OgbbwA/mqdefault.jpg)
Always wanted to make one of these. Very cool
do it please
Awesome job. I'm absolutely thrilled to be any degree of inspiration for this. Also sorry for pushing the drug that is FPV on you. I can't believe you cut that frame by hand. I take the same approach as you in making whatever I can myself and have been down that path so I feel your struggle. very excited to see future videos.
Um I'm late and it's too late. Any advice for recovery?
@@TrentTationnaiseXization advice for recovery? Unfortunately Samm is no longer with us. I think about him often and am so so sad to have such a capable talent leave us.
@@Kabab From the drug that is FPV and I'm new and just now discovering Samm. He was very talented and is still an inspiration.
Rest in peace, man. Maybe do some FPV racing in heaven!
Didnt know he passed. What happened?
@@BoydHitt Samm died a few days after being a solo motorcycle accident.
This was the video that got me on FPV.
Rip Samm. You will be missed.
He's no more? o.O
It's incredibly rewarding when you can build something and it works. Nice build!
New to drones which made this super fun to watch. Great job! I absolutely love how you so smoothly returned home at 3:47.
I did almost the same thing, except after buying a bunch of frames. Making something you can fly at home is amazingly rewarding! Also if your ecs's can run Multishot you can change the startup beeps to 3 other sounds. Cheers!
This is kinda funny.... you're just starting to get addicted to quads, as I just start to get addicted to planes :)
I love how the battery was plugged in again by the crash! xD
Sweet video, I'm impressed that you jumped right in and designed your own frame! And I know this was a while ago, but your friend asked if you can have a different jingle when your ESCs armed. Well, now with the latest BLHeli_S you can! 🙂
2:31 disappeared so quickly even camera girl got confused
i love diy quad builds!!!! you have some good ideas goin on bud! happy flying
well done and keep at it.
that power train should absolutely scream. the raptors are great and so are the FCs
you could even run tri-blades on that system for massive gratification.
Friendly advice; do not place your quad on sand. It might ruin your motors
Hey man great video! One thing of note: you are using really good components minus the ESCs, which make the biggest difference in how the quad flies. If you're interested in upgrading, the favorite littlebee 20a ESCs only cost about $14 a piece and will perform far better.
Nice job dude, clean build. I recommend a pigtail extension for your expensive VTX though, I just killed a 200mw immersion not doing so.
Also wanted to add that if you have trouble putting it down gently because it's just got tons of power, a slightly more shallow throttle curve for that bottom 20 or will help give more resolution there but still feel the same for flying.
Awesome advice, Thanks a lot!
Nice work. I did a similar build, but out of basswood. It was pretty light and very cheap, though it couldn't compete with carbon fiber. I'll see if I can get access to a CNC machine eventually.
I thought about trying some thin hardwood plywood!
You are awesome and never fail to interest me enough to focus 100% on your videos. Always clever and interesting.
P.S.: Your channel is one of the best practical RC/Airplane/Quad channels on RUclips...
Wish I had the drawing to make that frame it had the rare propriety of looking unique in the sea of similar looking frames but sadly I don't think I will be able to and has inspired me to design my own frame.
R.I.P Samm
Put some little foam pads on the bottom for a softer landing. Great flight for first time with arace quad.
couple things,
1, great job building from scratch and using the manual testing rather than the digital :D
2, you will get a better video signal if you get decently made antennas, i have used the same type as you showed, i had reception issues until i got a set made by someone on RCgroups, then i could fly farther than my radio i think :P
3, tie down EVERYTHING, it might not look like the esc can reach the prop, but it will find a way....
4, have safe fun!!
keep us posted Samm
good for you. nice job. nice to see people doing diy frames.
Nice work :)
Looks great, I would buy one if you sold them
First of all, Great Job!! I must however say I was shocked to see the CF being cut, sawed, and drilled with no dust management system. a 2 micron system is needed to protect your young, brilliant lungs from irreversible damage from the CF dust. 2 micron solutions are available cheap and decent systems start less than 300 from Harbor Freight & others. Please do a little research to become familiar with the risks you are taking. All the best to you. Your designs are very nice. be well sir.
Thanks very much! Respirators were worn
You really have a very nice work and you start to addicted with quads.i wish i have drone to know what the feeling having a drone..
I choose to mill my frame as my first project on CNC mill i used 2mm PCB mill (10 pcs for 10E) on homemade CNC mill and result was flawess, try propper millbits... and glue carbon plate to wood or mdf plate with doublesided tape.
+olekdh what was your spindle speed?
Wait, so how much did everything cost all together? I'd like to think the one I build was "budget" at ~$400, but I'd like to know what yours was so I can compare.
+LazerLord10 oh it was probably less than that
***** Hmm... Oh well, I've already spent the money, lol. Then again, that $400 includes the transmitter, and ALL FPV equipment too. It's a 450 quad.
Oh yea I wasn't including radio control or FPV ground station stuff
please post the frame in Thingaverse, i really like where you were going with it.
This is really cool I like the frame
The frame looks same as the famous frames and its pretty cool
You can send your design off somewhere and have it cut for you. Takes a couple weeks to a month turnaround depending on who you go to. I've had good experiences with this.
It was mostly a learning experience and an excuse to use the CNC's. But I definitely see that outsourcing would be the best way to produce and sell these.
I don't necessarily sell them. Any I've sold I've made 0 profit. I just like to apply my own ideas and enjoy it when other people want to use my frames as well. My idea of a frame was quite different than most stacked plates so I just HAD to try it. No excuse needed to create stuff!
I really appreciate the response and sensetivity of your drone. Can you please share the configs of your flight controller's firmware?
Awsome channel!! Funny, entertaining and above all informative. Keep up the great work
+Rubén de la Parte thank you!! Comments like these motivate me to keep going!
Kudos for designing and making your own frame
I LOVE THE POWER!!!
Hi, I think you can have a imperial song esc jingle if you upgrade to multishot.
good job on this, i really enjoyed it. one thing that you might want to do is put some double sided tape on the bottom of the esc so if you brush past a branch it doesn't tear it off
+reub razmuzen yes those Esc's are much more secure now
5:40 Good Bye
With the new esc on the market today I believe you can change the jingle they make.
Great looking and flying quad. Nice Job!
Hello, could you make a pdf file or something with every single parts you used to make the body? It could be so cool, I totaly love your design but I don't know much about quads
Well done! Thats an amazing drone! Like everything about it :)
Great build. must try and do my own frame some day.
Wow, your quadcopter is really fast. Well done.
I know nothing about drones, but wouldn't it be better to put the camera on a rotating frame on the drone? It would make it all heavier but that way you don't have to maneuver the whole drone when you want to turn
hey bro.. im proud of you.. good job. im a robotics engineer and a drone pilot.. keep it up man 👍👍👍
Unfortunately he died, dude... Less than a month ago. 😔
MC's Creations he wrote that before he died
Very cool demo. I didn't know so many things could go wrong with a cnc machine.
Could it have been the rigidity of the carbon fiber?
Thank you for the video.
dude u put 20 a esc but most of the youtubers says that put that esc in which 20% extra remaining amperes like 30a and even if we pair a 20a esc with a 2205 2300kv motor with 3s the max draw current is around 19.2.... so maybe the chance of burning esc simple the question is that can we pair the 20a esc with 19.2a max draw current motor is it safe ?
Good video man. It is a real inspiration. All the good wishes in your projects from Peru.
Luv that speed on that drone KEEP IT UP
I know this is a few months old video, but always take your props off before you plug any power into your quad for tuning.
hi bro, I want to buy one from you. whats your price?
Woa amazing. Can you share all the parts i need to make my own ? transmitter too. Really appreciate
nice work! also good to see someone using the word "build" correctly.
yup, much more fun than "spend lots of money and put together like lego."
How much does the 3D Printed plastic frame weigh?
Why did you do the 3d-printed version flat?
Most of the load is in the thin direction of the arms, both when flying and crashing.
I did consider making some elaborate shapes to take advantage of what a 3d printer can do but:
1. easy to model
2. Accurate dimensions to test how things will fit with a flat plate of carbon. This prototype model wasn't meant for structural performance.
3. The way a 3d printer builds flat floors and ceilings is pretty strong compared to non-planar surfaces
You have inspired me to design my own race quad :P
Can u make a video about what is important things cad drawing for drone frame?
Sam passed away several months ago, please check out his channel
2:22 You can make the esc's play the imperial march from star wars
I know that now thanks haha
Very nice built and preety much fast
Would you of had better luck with the carbon fiber cut out at your school had you done the arms and body separate? Then made the arms attachable.
I don't think that would have made a difference. I just needed more time to figure out how to do it right.
btw you can have a different tune on start up
Love it. Your videos are always great. Are there any interesting physics properties you were paying attention to with the design or were you just going with whatever looked cool?
Mostly the looks, and ease of fitting things in there. I did make sure to use nice curvy shapes for structure so that the stress lines wouldn't get pinched. And the front arms are a little beefier.
Dude I love it!! So cool and the Color scheme red and black my favorite are u selling the design of it ? The 3D printed one I want one so bad just like that red and black soo cool
I am all new to making quad, but interested in making one soon. What type of camera you have used and where can I buy good parts from.
thank you
Very nice, throw some tri blades on it.... great job.
awesome build.. how much did you spend to make .. ?
Great vid as always. Keep up the good work!
How do I know what battery i need if I build my own drone
I've alsow build a cheap Quadcopter with the same motors, ESCs and props. But I mounted the ESCs below the prop, so they are cooled all the time. They don't even get hot. My Battery (20C 5000mAh 3s) gets warmer than the ESCs and the motors, even when I fly fast. But I alsow had some problems with the ESCs. I bought 6 of them. Two work perfectly fine, two spin the propellers extremely slow sometimes, so you cant's start and two simply stopped working a few seconds in flight, witch caused some crash's.
++Tec you used a 5000mah 3s with these motors?
Oh, sorry, I phrased that wrong. I used a 3s 5000mAh at a quadcopter like in your attempt to build the "cheapest DIY Quad".
That makes more sense :)
Bro you need to sell these.. make some different sizes and you could make a living just doing this. maybe a kickstarter. just a suggestion what 3-d printer do you use ? Take care and keep flying.
Thanks, but that circle in this video is concrete
First flight in the park with the table was LOS, second at the field was FPV
Was this your first acro flight or was it angle?
how did you record the footage so clearly?
Zed's animations GoPro
he didn't show him using a GoPro maybe he used a onboard DVR
Awesome work
hey- i'm looking into running a drone webcam to vr goggles for a person who is visually impaired... where did you get your webcam and gear at.... any advice would be appreciated. Not making a drone just webcam to vr googles.
very nice job sir. Thanks for sharing. Peace
How much flight time that battery give you
How much would it cost me to build one from scratch? I don't have any RC or FPV equipment, so that'd have to be included in the price too. I'm just intertested in the ballpark figure, like is it $300 or $1000?
You could do it for around 300 to 400. Though good FPV goggles are already that much by themselves. I'd also recommend getting a little cheerson cx-10 just to get your brain understanding how to control the things. Will make flying the expensive stuff much easier.
Beautiful project man! Quick question; was it hard to tune the PIDs? I ask this because since the frame is 3D printed it can flex quite easily.
Everything in this video was stock PIDs on the SP Racing F3 Naze32. You can hear on the high speed flight that is a little work to be done!
where can I find 4mm Carbon Fiber sheets?
i have no idea what you said..but ME WANT one
that's awesome build! !
Yeah I really want to buy a 3d printer and a CNC Machine and build my own quad. I especially want to build a nylon canopy for my GEP-LSX6 and hopefully loose 100 grams.
Wow, good job, amazing DIY. 100 THUMBS UP.
hey.. i want to know if this setup is good for my first race quad... thanks in advance.
I don't sell the frame but the parts are good
Awesome project!!
So Cool man. Wicked.
To get the frame built use armattan productions and they could sell the frame for you.
+Simonjr gaming who are they and what do they do? Do they source their own carbon? Do you think others would want this frame?
With Armattan Productions you submit a design to their website (armattanproductions.com/). They will verify the design (check to see if your not stealing someone elses design) that will take a couple of days. After this they will tell you the price at which they will sell you the design (their prices are very competitive). Then you can set up a shop on their website where they can sell you the frame for whatever price you would like that is above the cost of the frame. You can then purchase the frame for yourself. As far as carbon goes, they will use carbon fiber from 1mm to 5mm and they only use the highest quality carbon fiber. As far as selling the frame goes if it is unsuccessful it wont cost you anything to sell the frame so you have nothing to lose. The frame also looks super durable so if you got the price low enough it could be a good first or learning racing frame. If you have any other questions go to armattans productions website and you can find more answers there.
Best of luck!
Where did you find your aluminium power distribution board ?
+Mickaels SAMP (AelsBot) it was "lumineer" brand. Not aluminum. I recommend the Matek mini power hub PDB
wow, I have a CNC and I would really like to cut my own drone but I would like to know where did you buy your Carbon Fiber and what thickness is required?
+Claude St-Louis I got a sheet on Amazon but that's not very economic. 3 or 4mm is normal
How much the total money you spend on it??
Do you have a cheap online source for carbon sheets of different thicknesses (or just carbon fiber cloth) ?
+shodanxx I don't know of a good supplier at this time. just ordered one sheet quickly from Amazon. Not cost effective.
Do let me know if you find one!
I did a survey of what was available on ebay.
Looks like the best deal is 200mm x 300mm sheets (0.5mm in particular).
Here are the best prices I could find for each thickness
200mmx300mmx0.3mm 7.87"x11.81" 93in^2 11.16$ 0.120$/in^2
200mmx300mmx0.5mm 7.87"x11.81" 93in^2 9.20$ 0.099$/in^2
200mmx300mmx1.0mm 7.87"x11.81" 93in^2 13.39$ 0.144$/in^2
200mmx300mmx1.5mm 7.87"x11.81" 93in^2 15.15$ 0.163$/in^2
200mmx300mmx1.5mm 7.87"x11.81" 93in^2 15.43$ 0.166$/in^2
200mmx300mmx1.5mm 7.87"x11.81" 93in^2 23.06$ 0.248$/in^2
You can get 100x500 200x300 but 300x300 or 500x500 is much more expensive and rare, likes 0.7$/in^2
I haven't done the survey, but seems carbon fiber rods of all sizes are available very cheaply.
hollow rods and square tubing is also available but it seems there's less choice and it is significantly more expensive.
On thing that strikes me about you design and most quad copter is, the "back plane" is in the wrong orientation ! Like , the motor tabs, they would be a LOT stronger in the direction they need to be if they were rotated 90 degrees !?
Do you know good ways to connect pieces of carbon fiber together that is as strong as the carbon fiber elements themselves (and without weighting too much more) ?
nice work man
Hi sam i need your help...how can i calculate the C rate for my lipo.?? which is the c rate that i need in order to prevent the damage of it ...if my motor squeze the batery..high drain of current and low c rate..i hope to be clear with my question..thanks for your video they help me a lot.
The capacity multiplied by the c rating of the battery gives you the maximum current they the battery can safely deliver. Or so that's the theory. So 1000mah (or 1 amp hour) times 70c is 70 amps max current draw
i think in the end it will be cheaper to buy a frame. But i like the idea of heaving my own quad aswell
+Goorc yea there are super cheap Chinese frames out there. I'm just irrationally addicted to doing things myself. Making things with my own personality in them. Mostly for all that I learn in the process.
what softwhere for desinging
2:30 amazing!
Hey, loved the new vid. Quick question: what software did you use to design the quad?
+Maniacal Cactus I used rhinoceros, but Google sketch up or Fusion360 are both good (and free!) fusion is also what I used to generate G-code for the CNC
***** Thanks man, I just downloaded fusion through my school. Hopefully I can start doing more advanced drones as well
how much flight time? Thx
What kind of 3D printer?