NOTE: Each of the control plates did have thousands of little colonies on them. Every tiny white dot is a colony, not just the larger white circles. The overall growth was less than I would have hoped, but the growth experiment still yielded interesting results!
The thing I found fascinating was that not only did the cold plasma treated area not have growth, but the fact that the effect persisted after treatment. I was expecting the growth on the outer edges to impinge on the treatment zone since the entire plate wasn't treated.
It's interesting how it can kill viral entities at the very core. Wonder if you could heavily hydrate someone, put them in a hot room like a dry sauna, and make a sort of wide brush of this cold plasma to kill a virus that would spread by touch and pushed out through sweat and oils.
as a diabetic with the typical diabetic ulsers which will likely end up with the loss of one or both of my feet, I wish the VA hospital (disabled Veteran) had the ability to use or even issue cold plasma wands. I have had one Ulser that is nearly 10 months old and not healing. the cold gas plasma wand may be able to change the future (length) of my legs, but medical progress is always slow (and likely too slow in my case)
Thanks James, really appreciate your help on understanding it. I felt a bit silly asking how you'd done the cold flame, because I realized you already explained it perfectly in your cold flame video. Regardless, appreciate your help.
I want to build a nitrogen based cold plasma so found your channel. I was first introduced to this in the mid 1990's when my team was trying to create some oxidizing radicals for reduction of certain compounds in diesel exhaust - after treatment of you will. Some VP stepped on our project because he did did not support development of what he called high school science experiments. Well, one scientist suggested a cold plasma to generate the desired radicals and showed us something similar to your device. it was 1/4" OD teflon tubing and at Tee fitting where the gas was introduced to the wire and the HF power supply. A simple little device where, like yours, the wire fell short of the outlet. We used nitrogen for the feed gas which nicely made and not too sensitive to the construction. Like all very cool science demonstrations, I suppose the novelty eventually turns into some outstanding device for improvement of life for all. Thanks for taking the extra time to show what a cold plasma might be useful for, that was the real effort in your work!!! BTW my team did finish some work and launched the first diesel oxidation catalyst in 1996. That VP destroyed my career.
Very cool that they're actually using/testing these wands. I would think this would be a game changer for minimizing or eliminating scarring and perhaps also help alleviate shock due to trauma, by quickly inducing the healing process vs the 36 to 48 hours after trauma on average for healing to begin.
the lag time is due to the body/mind's response to trauma's shock. cells and systems need to 'reset' - adjust to the environment, and reorient. probably ought to let nature do her part a bit as well. and all vitals need to be seen to and any problems ascertained ASAP.
I've read and heard about this as well as "rapid cell regenerative techniques and other amazing things" as far back as 50 years. It's about time this came out and you are one of the heroes forcing this to come out. Thank you.
@@tonyromano8337 well the very first step in order to allow healing of a wound instead of it being a warzone between your white blood cells and w.e invaders that came from the object that caused the wound in the first place(or contact with the air, ground, or water that isn't salt water), is to sterilize the wound, otherwise no healing takes place, because the cells in charge of doing that would constantly be under attack by foreign bacteria or fungus or w.e else. So wound needs to be sterile as much as possible, at least to a degree that your own immune system(depends on how strong it is) can handle w.e spots you missed. So since this can be used to sterilize, then yes, in a sense this helps heal wounds. But no this doesn't regenerate cells, the only thing I know that does that is stem cells. There are patches of stem cells that are researched, and this foam like thing that you just pour all over an open wound and it will create a biome to protect and heal and connect everything back together where it can and close the wounds where it cannot, based on stem cells as well. But last I checked on that foam thing, which the primary use or intended target is for the military, it was years ago, I do not know where they are at now in their progress.
Many years ago on a UK science TV show (Tomorrow's World), they suggested that cold plasma could be used to stop a damaged tooth from decay. They said the plasma applied every day could kill the bacteria while allowing the enamel to grow back and heal the tooth.
Yes They Did And It Was Going To Revolutionise The Dental Market Because It Was So Effective In Regrowing The Damaged Teeth Very Quickly ... How This Tech Got Buried, i Wonder Why ? Strange That.
Neat! I managed to get similar results with argon (much cheaper than helium) but it required a small array of needles rather than a single wire as in yours. I didn't check its ability to kill microbes, but there's little reason to think it wouldn't. IIRC it manages to degrade biofilms and rupture non-eukaryotic cell walls (bacteria) while leaving animal cells unscathed.
i’d guess the big difference between bacteria and animal cells here is the bacteria are on their own to some extent, while the animal cells are agglomerated and that reduced surface area lowers the depth that reactive oxygen gets to because dead cells then function as armor. however i could be wrong and animal cells are more resistant
@@morgan0 Not so much re:population density. Bacteria form dense colonies within biofilms but have vulnerable, simpler cell membranes compared to animals (broadly speaking), which are easily broached if the biofilm can be removed or rendered permeable, but the latter is no easy task. Traditionally speaking, from a medical perspective, mechanical abrasion (i.e. scrubbing) is the last/best defense against bacterial biofilms, rendering treatment of large-area burns an excruciating experience.
Are you able to make an defective wand? For plasma based on argon gas? I wonder if it would aid the body in its natural healing processes such as working out
Now we just need a way to electrically separate hydrogen from water then fuse it to helium for a constant source of helium! I'm sure you can come up with something Jay. (This is a joke but I do think its a cool thought experiment)
Yeah I’m pretty sure you can build a fusor for that. And to get hydrogen out of water, all you have to do is stick some electrode it and build something to separate the two gases from the two electrodes. Sadly though, fusor are pretty hard to build, he’s an awesome guy but I don’t think Jay is up for it yet
I was just messing around and looking up Plasma physics content on RUclips to see what people know about this field and this video was the first to pop up in my search feed. I found it extremely interesting to see what you managed to achieve with a homemade device like this one. I myself am a researcher in Plasma physics in Switzerland and I’ve been working on the topic of plasma disinfection for about 6 months now going from a HV DC plasma to a 30 kHz DBD and currently a 13.56 MHz RF plasma. Trials on E. Coli and S. Epidermidis showed how powerful and efficient plasmas can be in fighting against microbial infections. The next big step is HAI and I’m looking for a certified partner to carry out the disinfection tests on multi-drug resistant bacteria. Sorry I got carried away! But anyway, great content on a very important topic, especially during the tough times we’re going through! Love and respect from Switzerland!
Clear back in the late 1970s they were having success with electrical stimulation growing back finger tips. I also remember a gadget you could shock with a plasma\lightning bolt a cold sore and it would heal faster. As early as the 1800s they were doing electrostatic health treatments to people and experimenting with electro horticulture. Electricity is just neverendingly interesting...
Use fungus on your plates the useful application I can see is using it for surface sterilization. Rather than cultivating the stuff we want to avoid sterilization using mushroom mycelium. You can place mycelium culture on the plates. The easiest method is to use liquid culture made with water and clear corn syrup or glucose that is used to make clear frosting. You can boil or PC the liquid substrate and use multi-spire syringe or you can buy liquid culture syringes if you want to waste money. Mushroom mycelium is strong when established but cannot compete with other microorganisms before it is fully colonized. This will give you an idea of where you sterilized the substrate surface of the PDA or MDE.
Thanks for another great video Jay, these are always a pleasure to watch! I'm surprised how well your Slayer Exciter worked for this when ran on helium; I've never seen such a stark contrast of gas ionizability.
Thanks Zach! Dude I really need to get back to you. Let me do it here: Yeah, totally down for the SSTC build. I'm planning it for an upcoming video. Will definitely credit you and share the glory!
@@PlasmaChannel That's great! I sent an email with a few details I want to iron out (like where I send the PCBs to), if you could respond to that, that'd be great!
I used one of those when doing my bachelor thesis on fiberoptics. We used a plasma pen to activate the surface of the optical fibers so we could print lenses and stuff like that ontop of them. Without the plasma treatment it wouldnt stick to the surface as well.
So this is what the 1920’s violet ray was trying to achieve. The violet ray is an antique medical appliance used during the early 20th century to discharge in electrotherapy. Their construction usually featured a disruptive discharge coil with an interrupter to apply a high voltage, high frequency, low current to the human body for therapeutic purposes.
Nah. The violet ray was more about thermal effects. You could get 'tools' with which you could burn away moles and warts. Spread the power over a larger area, and you'd just get a little tingle (insinuating that it's doing Healthy Things to your nerves) or a warming effect due to the RF heating.
Royal Rife had done some experiments with light and frequency and curing cancer. He also invented the "Universal microscope". Maybe there are some similarities.
@@korntageous Yea, and the put him in prison for it. Now there is a Ted talk about shattering cancer with frequencies. The medical field is just starting to open up to the ideas Rife had 100 years ago. Maybe in another 100 years we will put it into common practice.
Nice experiment with cold plasma. As for decontamination, wounds, blisters or burns with liquid nitrogen when removing warts or burns with hot objects or liquids. I use a simple, thin slice of half or a third of a clove of garlic, which I change morning and night, and within three days the wound is usually dry and well on its way to healing. There are no red areas that indicate inflammation, the skin is moist and white, and the wound heals incredibly quickly.
Really interesting video. I'm going to suggest you do a minor cut or abrasion injury on each of your arms in the same location(or possibly on one arm a suitable distance apart) and treat one with cold plasma while leaving the other to heal on its own. Take a picture every 8 hours to record the progress. Could be very interesting!
Hey M M, great input. I considered doing that, but figured that it might come across as "not advertiser friendly" if I admitted to cutting my arms on the video. But, that was the plan, do a real world test.
@@PlasmaChannel Yeah, hard to say. I think that if you avoided showing the creation of the injury itself and just the aftermath you would likely be fine. Could even use sandpaper and rub it a certain amount of times with the same pressure to ensure a consistent result. Wouldn't be as visually disturbing as actual cutting and when viewed under magnification still very interesting. Just a good opportunity to do something "first". Have a good weekend!
Also I think using smaller spiky electrodes might allow you to control the output if you can shape them just right over a thicker wire. Plus, maybe some valves in the wand base and opening to control flow. I'm really over thinking this lol.
apparently they exist www.etsy.com/listing/807877942, if you used that and a small high voltage supply you could make a really cool portable sterilizing pen!
You may use the small circuit boards in plasma globes, they are small and have a output of about 2000V, you may increase the voltage also according to your needs. It will make your wand battery powered and portable
You should try a cold plasma antennas pointed at each other with one set at 180 degrees out of phase and the other normal. Then put your plants between the antennas. The results are amazing. Heck one hour between the antenna and you will feel the best you have in years. I love seeing science in action keep it up.
I love high voltage projects, and I've been playing around with them most of my adult life (I'm currently 74). For the past few years I have been experimenting with exploding bridge wires (look it up). But, I don't use bare wire like most people have done in the past, but rather I use thin insulated wire. I place a white card under or next to the wire, then dump a 100uF at 4KV capacitor across it using a triggered spark gap. The sound it makes is like a large firecracker or gunshot. But the most interesting thing is the weird patterns it creates on the white card, which is from smoke and vaporized wire. Let me know if you want more details on this fascinating project.
@@stevenheiser6888 -- NEVER, NEVER, NEVER grab anything or any two things with both hands. ALWAYS grab things with one hand at a time, even when you are certain the power is turned off. The reason is if you get shocked through one hand, it will hurt like hell and will potentially destroy your hand, depending on many variables. But if you get shocked through both hands, electricity might take a path through your body and across your heart. Need I say what the result might be? If you learn nothing else, please learn this before you decide to play with high voltage equipment.
I work at a hospital as an electrician. In our Engineering Department we have to provide Medical Grade Helium to the Surgery Department. This would be neat if they use helium in this regard as well. I've heard they also use helium to pump organs needed with gas for inflation as well. Cool stuff. Helium tanks also have different output threads as well. Helium tanks in the gift shop and helium tanks in the surgery department have different threads. One is female and the other is male. Makes sense. Great video. God bless 🙏
It does. He's completely overlooked the idea that ozone is what the "active ingredient" is here... the helium is pointless. The oxygen in both the tank (yes, the helium tank) and the air, are supplying what's necessary to make ozone, a potent disinfectant.
@@SubvertTheState If you are referring to the helium, that's "part of it" but not chemically. Helium makes a good striking gas; it is just facilitating the ionization. When the plasma is present, the flying electrons have enough behind them to break O2 bonds, and the free oxygen atoms that result find regular O2 and react with it. The helium is basically just a medium for this to take place in. It isn't absolutely necessary, but it will take a higher voltage to get a similar corona discharge that creates the ions without it. Things would also be a bit different if you were to use pure O2 as the feed gas for this lol ozone in quantity isn't friendly.
Interesting that the effect is so specific for the area that it touches, but it makes sense. Heat would radiate out, which wouldn't happen with cold plasma. Useful if you don't want to disturb the natural flora of the skin around an injury while sterilizing the wound.
What an awesome design! Looks great and it's made with affordable or easily obtainable materials *and* it's beneficial to our health!? Can't get much better than that...I would like to make one now to try on wounds. I imagine that it would work really well on disinfecting infected wounds too. If so, then we know the cold plasma would work wonders with acne or any other minor skin infections.
Hmm, I wonder what other applications this could have? Maybe some sort of plasma-lithography art? Rapid glue hardener? Hair removal? Plasma tooth brush? Could it change the taste of food? Does it cause certain chemicals to change color? Could it be used to precisely spot-measure a material's oxygen sensitivity? How much further would it extend if you implemented a laminar flow nozzle? What if it is used with helium mixtures containing other gasses? There are so many possibilities!
From other comments I read, it sounds like different gas mixtures require different electrode densities, voltage adjustments, or both. I think it's possible to print electrodes on acrylic and switch how many turn on or off. To find out, I'd check to see if anyone has made a circuit printer that accepts an acrylic substrate. Otherwise an acrylic glue mixed with the right density and homogenous mix of conductive particles applied to a mask may work for nice lines. Those recipes for conductive ink made compatible for acrylic would be nice.
@garyrich2000 I have to say that your suggestion is actually valid, raises relevant and interesting points, and builds upon the topic of the video and also in line with the comments and/or questions in the thread, to the point where I forgot my own, and found myself saying, "Hey that's sounds like a possible . . . Yeah! What he said!? Somebody do it!!" Lol
@@tomconner5067 I just watched this video again and I noticed him saying helium was selected because it is easily conducts over other glasses. So I wonder what happens if Ionized air is fed into the pipette?
I would love to see this used on pediatric patients for more invasive lacerations, breaks my heart having to sterilize wounds using stuff like alcohol so seeing this standardized would be amazing. Thanks for the video, learned a lot.
8:20 if you cover a surface wound with plasma activated oil, the wound heals up to twice as quickly as a non-covered wound due to the oil encouraging the production of collogen as well as the plasma activated oil performing the same sterilisation as direct plasma treatment.
Would you consider producing a how-to-make video on this device? I'm getting older and wound don't heal as quickly they used to. I'd love to have one of these at home.
So cool to see my PhD subject inside a RUclips video as yours ! Hope you will try a dielectric barrier discharge torch soon (way safer and in my sense even cooler). If you need more scientific explanation just ask.
the third cold plasma happened to get fungus growing on it instead of just bacteria. Most fungus is bad at competing with bacteria, but some strains can manage to win out despite the conditions and nutrients being less than ideal for fungi. Fungi prefer wood and phosphates instead of agar, but they'll still eat it up and grow if need be.
Damn you beat me to it and i am glad you did. I was going to try heated salts vapour in a tube and see what happens as well. Maybe that might be something your interested in . I hear borax works well too.
I really enjoyed this video. I don't even care if the results weren't as good as you anticipated (visually underwhelming as you referred to it), I just enjoying watching stuff being built like this.
Yes, please do a build with the power source on board. Love the video bud, you're a smart man with an intelligent knowledge base and have an informational delivery capacity to better elaborate on things to where the result, I find, is much more in need in this world. Thank you for the interesting video and you did a great job explaining things better than most. It is nice to see and therefore, making subjects more understandable. Makes the world more of smarter place hypothetically because the results would show "wisdom is love and intelligence" yet it needs to be learned. "None the wiser" is a saying but none the wiser could also mean "never learned" as well as "unwilling to learn" but that would bring up a whole other hypothetical topic such as knowing and not yearning for better. 😏 Keep it up brother. ✊👍📊🎯📈
the oxidative features are provided by the application of hydro-ionic superfluidity rather than the plasma itself. The same effect can be achieved through induction of electrical current to a wound or organ. Microbes tend to dissolve under repeated duress of hydrogen concentration imbalance, particularly if they lack sufficient surface area to share the load of voltage discharge that social eukaryotes have. Great replication video
I have seen the future and it is a beautiful thing. This is especially true when it comes to the potential healing properties of cold plasma. I first encountered this technology while attending a medical conference in Las Vegas a few years ago. A small company called Quark Enterprises was demonstrating their new product, the "Cold Plasma Wand." It is a handheld device that emits a stream of cold plasma. I was skeptical at first, but after watching them use it to heal a deep cut on someone's hand, I was sold. Since then, Quark has continued to develop their technology and has now unveiled their latest creation, the "Powered Tesla Coil." This device not only emits cold plasma, but also generates an electrical field that amplifies the healing properties of the plasma.
Cool! A question, though: is there any benefit to the sterilization here versus the ozone sterilization you demonstrated before? "Reactive oxygen species" sounds like ozone to me, but I'm not fluent in chemistry. Is there a difference?
Hi Nathaniel, ozone is a massive component to the "reactive species", however, ozone does not account for the reactive nitrogen species component. You can have ionized oxygen not form into Ozone as well.
Cold plasma only adds an electron to the gas molecules, so instead of splitting oxygen O2 into ozone O3 it creates anions O2-, N2-, H2O-, He- and so on. The ozone is poisonous and the room should be aired after disinfecting with it. But these anions are harmless and they are actually found naturally in fresh air. There are home ionizers available that can make them without visible cold plasma and no need for helium. I am using one at home and it helps with my pollen allergy as the electrical charge pulls dust down (ozone won't do that because it's electrically neutral).
It's a common misconception that ozone is toxic; while it is a potent oxidizer, which means that it can break down cells, it would take a ponderous amount of ozone over many, many half lives to cause a healthy person harm. It's great for cleaning air, though!
Sure, but if I had a dollar for every study with weak conclusions... Ehh, you see where this is going. As always, be aware of your individual tolerances, but as for me and my familiars, we've never seen ill effects from the so-called dangerous levels of ozone put off by commercial ozone generators, even after hours of exposure. I can't speak for those who have had issues, but I do suggest that there's more to be understood about it than the usual alarm bells would have us assume.
I don't believe the helium gives up the radical oxygen atom during the plasma generation, since it's only changing the state of the matter not it's molecular composition. Just my hypothesis, and I'm basing this on part of a single lesson during a fraction of one day in my public school eucation 35+ years ago, when all I had on my mind were girls, music, wrestling, girls muscle cars, and girls. So look into it and let me know if that brain cell is still glitch free or if I need to clear the cache, I slept the whole time every day during that class and still managed an A on the midterm and final exams. No I didn't cheat, my mind somehow retains things I hear when Im asleep! True story.
Yes, I do like what you developed and like to see more. This is probably one of the key technologies for the close future - lets say next 10 - 15 years. Let me guess the disadvantages I can think of: 1. There is no housing which sucks air in with zero velocity and mix it with already accelerated air. Furthermore accelerated air will exit the main "power" stream. 2. through the design much acceleration will be created but the aerodynamics isn't good so efficiency will decrease. 3. Though the thick ground tubes even more swirls influence the efficiency even more. I would use wires too, instead. 4. Probably two stages are as efficient as the tree. Though I would reduce the ioniser to save energy and weight. What else do I recommend: 1. support laminar flow right from the beginning and through the housing 2. using the "Dyson fan effect" which sucks up to 15 times more air with the generated air stream, which is used for aviation of electrical aircraft engines under development.
@@PlasmaChannel "In addition to being rare, helium is (mostly) not a renewable resource. The helium that we have was produced by the radioactive decay of rock, long ago. Over the span of hundreds of millions of years, the gas accumulated and was released by tectonic plate movement, where it found its way into natural gas deposits and as a dissolved gas in groundwater. Once the gas leaks into the atmosphere, it is light enough to escape the Earth's gravitational field so it bleeds off into space, never to return. We may run out of helium within 25-30 years because it's being consumed so freely. " As far as I know we can't produce enough to cover demand...
I work in this field and love your design specially connecting to Tesla coil… interesting… it’s really good DIY and very informative… fantastic project for students…
I have shared your video with almost everyone I know including the top tear of a multinational tech company, the basses of whick are my friends. Love the subject & how you made the cold plasma torch come to life to save lives. It will be invaluable for future space flights.
I’m curious if the cold plasma affected the nutrients in that center region’s gel instead of sterilization. Like denatured proteins or something. The bacteria growing on the outside untreated area should of been able to move in but something about that center area’s gel wasn’t the right conditions to grow in. Also on another note, especially with treating wounds, there’s a chance radiation from the cold plasma could create thymine dimers and dna damage is especially high risk in damaged areas where new skin cells are growing and could increase the risk of cancers.
Great job! I had a HeNe gas laser I had purchased from a scientific supplier some time ago. I didn't know at the time you should keep it running. After a while it would not start. The only way I could get it to work is put it in the freezer for about an hour. Then turn it on voila 633 nm at .33 mws.
In my experience, door handles* are perfect things to swab to get a variety of strong bacteria. As you learned, hands aren't great sources for getting bacteria, as they're washed regularly.
5:17 I'm here rewatching 3 years later (after just watching your most recent on using cold plasma on seeds) and I see my comment from 3 years ago saying "yes build one with onboard power supply" 😂 Yet we haven't seen one yet! 😅 It's been 3 years man! 🤣 I jest. You've been killing it man! Keep it up!
Hypochlorus Acid (HOCl) is a fantastic sterilizer. It is also created in our bodies to fight infection. It's very inexpensive to make at home; distilled water, distilled vinegar and a bit of kosher salt. This mixture is then electrolized. I know this is the plasma channel, but HOCl is very transportable and very safe.
I have a few suggestions to improve the cp wand. First, try steel wool. Fill the pipette loosely with it. This gives more contact with the helium. Second try increasing the flow rate. More gas, more pressure, and hopefully more plasma. And third, try different nozzle shapes. Is it better with a thinner wider opening like a brush, or many smaller holes bunched together.
Also, for the cultures I'd suggest using yeast and a agar medium. If agar is unable use gelatin mix you can find in the preservatives sections of the grocery store. Mix it a bit of sugar and broth. It should show up nicely.
Very cool .... There is a relatively inexpensive device advertised as being used for skin tag removal that has a high voltage system/wand. You might check that out. You now would need an He source ......
This is amazing. I would totally build one of these right now if i had the helium. Also, those mystery blotches on the last plate are fungal colonies - a couple of airborne spores probably landed in the dish and grew.
NOTE: Each of the control plates did have thousands of little colonies on them. Every tiny white dot is a colony, not just the larger white circles. The overall growth was less than I would have hoped, but the growth experiment still yielded interesting results!
But how is it cold???
Am more than thrilled and impressed with your inventions of using plasma, am wonder here is it possible to treat cancer cells with cold plasma?
The thing I found fascinating was that not only did the cold plasma treated area not have growth, but the fact that the effect persisted after treatment. I was expecting the growth on the outer edges to impinge on the treatment zone since the entire plate wasn't treated.
It's interesting how it can kill viral entities at the very core. Wonder if you could heavily hydrate someone, put them in a hot room like a dry sauna, and make a sort of wide brush of this cold plasma to kill a virus that would spread by touch and pushed out through sweat and oils.
as a diabetic with the typical diabetic ulsers which will likely end up with the loss of one or both of my feet, I wish the VA hospital (disabled Veteran) had the ability to use or even issue cold plasma wands. I have had one Ulser that is nearly 10 months old and not healing. the cold gas plasma wand may be able to change the future (length) of my legs, but medical progress is always slow (and likely too slow in my case)
oh man! this is cool, literally!
Ayyy I see what you did there big boom. Thanks bud.
Second reply
Mehdi would even get a burn from the cold plasma 🤣🤣🤣
Now set your room on fire with this
@@sujoymukherjee5058 he will surely find a way
Well done! Great design
Thank you!
Wow, this guy nailed your cadence and intonation. Anyway, really cool presentation. Great job, Emmet Short - Justin time traveling hybrid!
Big props to both your channels for doing science that seems like real magic
Bing Chilling 🥶🧁Bing Chilling 🥶🧁Bing Chilling 🥶🧁Bing Chilling 🥶🧁
I love how I see a lot of the science community here on Jay's channel. I just love it.
Sweet setup! That worked out well! I liked the experiment with the bacteria colonies as well
Can't believe, you only have 1 like
I can't believe you have only 3 likes.
Thanks James, really appreciate your help on understanding it. I felt a bit silly asking how you'd done the cold flame, because I realized you already explained it perfectly in your cold flame video. Regardless, appreciate your help.
Bing Chilling 🥶🧁Bing Chilling 🥶🧁
In a 100 years, you'll be holding a black hole in your hand.
I want to build a nitrogen based cold plasma so found your channel. I was first introduced to this in the mid 1990's when my team was trying to create some oxidizing radicals for reduction of certain compounds in diesel exhaust - after treatment of you will. Some VP stepped on our project because he did did not support development of what he called high school science experiments. Well, one scientist suggested a cold plasma to generate the desired radicals and showed us something similar to your device. it was 1/4" OD teflon tubing and at Tee fitting where the gas was introduced to the wire and the HF power supply. A simple little device where, like yours, the wire fell short of the outlet. We used nitrogen for the feed gas which nicely made and not too sensitive to the construction.
Like all very cool science demonstrations, I suppose the novelty eventually turns into some outstanding device for improvement of life for all.
Thanks for taking the extra time to show what a cold plasma might be useful for, that was the real effort in your work!!!
BTW my team did finish some work and launched the first diesel oxidation catalyst in 1996. That VP destroyed my career.
That vp is messed up could’ve made headlines man
Did you sign a nda
@@valestivale4711 I hate NDAs lol
Very cool that they're actually using/testing these wands. I would think this would be a game changer for minimizing or eliminating scarring and perhaps also help alleviate shock due to trauma, by quickly inducing the healing process vs the 36 to 48 hours after trauma on average for healing to begin.
the lag time is due to the body/mind's response to trauma's shock. cells and systems need to 'reset' - adjust to the environment, and reorient. probably ought to let nature do her part a bit as well. and all vitals need to be seen to and any problems ascertained ASAP.
I've read and heard about this as well as "rapid cell regenerative techniques and other amazing things" as far back as 50 years. It's about time this came out and you are one of the heroes forcing this to come out. Thank you.
He literally said it's already used in hospitals so I don't think any increased use in the future can be attributed to a RUclips video.
Antisemite comes raging out of the past complaining the past isnt futuristic enough because "je- cabals". Nothing new here.
@@unvergebeneid wait… this can heal wound ??
@@tonyromano8337 well the very first step in order to allow healing of a wound instead of it being a warzone between your white blood cells and w.e invaders that came from the object that caused the wound in the first place(or contact with the air, ground, or water that isn't salt water), is to sterilize the wound, otherwise no healing takes place, because the cells in charge of doing that would constantly be under attack by foreign bacteria or fungus or w.e else. So wound needs to be sterile as much as possible, at least to a degree that your own immune system(depends on how strong it is) can handle w.e spots you missed. So since this can be used to sterilize, then yes, in a sense this helps heal wounds. But no this doesn't regenerate cells, the only thing I know that does that is stem cells. There are patches of stem cells that are researched, and this foam like thing that you just pour all over an open wound and it will create a biome to protect and heal and connect everything back together where it can and close the wounds where it cannot, based on stem cells as well. But last I checked on that foam thing, which the primary use or intended target is for the military, it was years ago, I do not know where they are at now in their progress.
Take your Vitamin D if you like to hide in the shadows. Don't let pharma WIN!
probably one of the coolest things I've learned about all year, thanks for the quality content :D
That means....a lot. Thank you. This is why I do RUclips - and comments like this are fire.
Thanks!
Thank you!
Absolutely insane! Loved the concept and Im impressed of the results of the usage of cold plasma to heal wounds
This is becoming a meme Jay (1:48)
Haha I can only hope. Maybe it will be the face of my new Memecoin, Plasma Coin.
😂😂😂
1:48 “Daylight savings? My reality’s about to get fucked up.”
It isn’t dirty, it’s just.. being a human………….
integza i love your videos bud!
Many years ago on a UK science TV show (Tomorrow's World), they suggested that cold plasma could be used to stop a damaged tooth from decay. They said the plasma applied every day could kill the bacteria while allowing the enamel to grow back and heal the tooth.
Yes They Did And It Was Going To Revolutionise The Dental Market Because It Was So Effective In Regrowing The Damaged Teeth Very Quickly ... How This Tech Got Buried, i Wonder Why ? Strange That.
@@NinjaNige Hi Nige. You're still making great videos I see. I'm still subbed to your channel. : )
@@lostjohnny9000 Thanks For Saying Brother And Thanks So Much For The SUB, Yes Trying To, Hope To Have One Up In The Next Day Or So
@@lostjohnny9000 is he schitzofrenic
@@NinjaNige Even if they did build the device, the costs for paperwork, regulation, testing, and so on would require some type of significant backing.
Neat! I managed to get similar results with argon (much cheaper than helium) but it required a small array of needles rather than a single wire as in yours. I didn't check its ability to kill microbes, but there's little reason to think it wouldn't. IIRC it manages to degrade biofilms and rupture non-eukaryotic cell walls (bacteria) while leaving animal cells unscathed.
Cool!
i’d guess the big difference between bacteria and animal cells here is the bacteria are on their own to some extent, while the animal cells are agglomerated and that reduced surface area lowers the depth that reactive oxygen gets to because dead cells then function as armor. however i could be wrong and animal cells are more resistant
@@morgan0 Not so much re:population density. Bacteria form dense colonies within biofilms but have vulnerable, simpler cell membranes compared to animals (broadly speaking), which are easily broached if the biofilm can be removed or rendered permeable, but the latter is no easy task. Traditionally speaking, from a medical perspective, mechanical abrasion (i.e. scrubbing) is the last/best defense against bacterial biofilms, rendering treatment of large-area burns an excruciating experience.
Are you able to make an defective wand? For plasma based on argon gas? I wonder if it would aid the body in its natural healing processes such as working out
I just bought a cold plasma machine to use on acne clients, can’t wait to get it!! So excited for this breakthrough in skincare🥰
From where did you buy it?
Videos like this are one of the main reasons that I love RUclips!
Now we just need a way to electrically separate hydrogen from water then fuse it to helium for a constant source of helium! I'm sure you can come up with something Jay. (This is a joke but I do think its a cool thought experiment)
Lol u could use electrolysis and then pump it into the sun
Yeah I’m pretty sure you can build a fusor for that. And to get hydrogen out of water, all you have to do is stick some electrode it and build something to separate the two gases from the two electrodes. Sadly though, fusor are pretty hard to build, he’s an awesome guy but I don’t think Jay is up for it yet
I'm guessing you want him to make an inline Farnsworth fuser? Would be cool.
@@Justin-dv7ul Big emphasis on yet, one day he could potentially be capable of who knows what futuristic tech.
Enamel Bucket yeah I know, I mean maybe not like the next video
I'm really into pharmokinetics and medicine in general and was really impressive by this, hopefully we see more of this in the near future!
I was just messing around and looking up Plasma physics content on RUclips to see what people know about this field and this video was the first to pop up in my search feed. I found it extremely interesting to see what you managed to achieve with a homemade device like this one. I myself am a researcher in Plasma physics in Switzerland and I’ve been working on the topic of plasma disinfection for about 6 months now going from a HV DC plasma to a 30 kHz DBD and currently a 13.56 MHz RF plasma. Trials on E. Coli and S. Epidermidis showed how powerful and efficient plasmas can be in fighting against microbial infections. The next big step is HAI and I’m looking for a certified partner to carry out the disinfection tests on multi-drug resistant bacteria.
Sorry I got carried away! But anyway, great content on a very important topic, especially during the tough times we’re going through!
Love and respect from Switzerland!
Hi, I am a researcher for India, Kindly provide me your email so that i can discuss about how to generate RF plasma
Hi, what is HAI exactly? High Amp Induction? As opposed to high voltage DC? Or are you speaking of something else?
Clear back in the late 1970s they were having success with electrical stimulation growing back finger tips. I also remember a gadget you could shock with a plasma\lightning bolt a cold sore and it would heal faster. As early as the 1800s they were doing electrostatic health treatments to people and experimenting with electro horticulture. Electricity is just neverendingly interesting...
why have all of this been hidden from public health and more.....?
I gotta say I really like your dedication to clear acrylics. It makes the project so easy to see it all and looks a bit scifi if you ask me.
Use fungus on your plates the useful application I can see is using it for surface sterilization. Rather than cultivating the stuff we want to avoid sterilization using mushroom mycelium. You can place mycelium culture on the plates. The easiest method is to use liquid culture made with water and clear corn syrup or glucose that is used to make clear frosting. You can boil or PC the liquid substrate and use multi-spire syringe or you can buy liquid culture syringes if you want to waste money. Mushroom mycelium is strong when established but cannot compete with other microorganisms before it is fully colonized. This will give you an idea of where you sterilized the substrate surface of the PDA or MDE.
Thanks for the input. Yeah, I had trouble with my growth
I'm curious to see what varying the voltage and frequency would do. A portable version would be neat. Beautiful video. As always Stay classy.
agree
Thanks for another great video Jay, these are always a pleasure to watch! I'm surprised how well your Slayer Exciter worked for this when ran on helium; I've never seen such a stark contrast of gas ionizability.
LabCoatz!!! Did Jay ever get back to your email?? He said he would in the livestream, and that was a week ago...
Thanks Zach! Dude I really need to get back to you. Let me do it here: Yeah, totally down for the SSTC build. I'm planning it for an upcoming video. Will definitely credit you and share the glory!
@@PlasmaChannel That's great! I sent an email with a few details I want to iron out (like where I send the PCBs to), if you could respond to that, that'd be great!
YES!!! It's HAPPENING!!! Best...collab...EVER!
“Plasma is the fourth state of matter.”
Quantum Physics “Challenge excepted.”
Thank you!!! Truly amazing content. I wish all content was as interesting and informative as this was. Amazing work.
I used one of those when doing my bachelor thesis on fiberoptics. We used a plasma pen to activate the surface of the optical fibers so we could print lenses and stuff like that ontop of them. Without the plasma treatment it wouldnt stick to the surface as well.
Thats interesting I'm guessing the lenses stick to an oxidative layer and the plasma does the oxidizing I've never thought of that
So this is what the 1920’s violet ray was trying to achieve.
The violet ray is an antique medical appliance used during the early 20th century to discharge in electrotherapy. Their construction usually featured a disruptive discharge coil with an interrupter to apply a high voltage, high frequency, low current to the human body for therapeutic purposes.
these days the violet ray is used for sexytimes
@@JinKee The world is ready to destruction.
Nah. The violet ray was more about thermal effects. You could get 'tools' with which you could burn away moles and warts. Spread the power over a larger area, and you'd just get a little tingle (insinuating that it's doing Healthy Things to your nerves) or a warming effect due to the RF heating.
Royal Rife had done some experiments with light and frequency and curing cancer. He also invented the "Universal microscope". Maybe there are some similarities.
@@korntageous Yea, and the put him in prison for it. Now there is a Ted talk about shattering cancer with frequencies. The medical field is just starting to open up to the ideas Rife had 100 years ago. Maybe in another 100 years we will put it into common practice.
Playing with Plasma is the best hobby in the universe .
Oh it's not possible in your universe ... actually Dark Matter is more precisely the best hobby out here , it can give you Avatar like abilities too .
man its pretty amazing how cheap this actually costs to build, shows amazing promise to the medical community
Nice experiment with cold plasma.
As for decontamination, wounds, blisters or burns with liquid nitrogen when removing warts or burns with hot objects or liquids.
I use a simple, thin slice of half or a third of a clove of garlic, which I change morning and night, and within three days the wound is usually dry and well on its way to healing.
There are no red areas that indicate inflammation, the skin is moist and white, and the wound heals incredibly quickly.
Really interesting video. I'm going to suggest you do a minor cut or abrasion injury on each of your arms in the same location(or possibly on one arm a suitable distance apart) and treat one with cold plasma while leaving the other to heal on its own. Take a picture every 8 hours to record the progress. Could be very interesting!
Hey M M, great input. I considered doing that, but figured that it might come across as "not advertiser friendly" if I admitted to cutting my arms on the video. But, that was the plan, do a real world test.
@@PlasmaChannel Yeah, hard to say. I think that if you avoided showing the creation of the injury itself and just the aftermath you would likely be fine. Could even use sandpaper and rub it a certain amount of times with the same pressure to ensure a consistent result. Wouldn't be as visually disturbing as actual cutting and when viewed under magnification still very interesting. Just a good opportunity to do something "first". Have a good weekend!
@@PlasmaChannel well maybe in the future if you accidentally get a cut, you can treat half the cut with plasma and leave the other half?
@Plasmachannel then get someone with a cut already and willing to do the trial run.
So this is 100% not how excitation regeneration works lol
use an onboard power supply and one of those high pressure co2 cartridges filled with helium to make it fully portable
Hmmmmmmmmmmmm. CO2 cartridge with Helium?? You have my attention.
Also I think using smaller spiky electrodes might allow you to control the output if you can shape them just right over a thicker wire. Plus, maybe some valves in the wand base and opening to control flow. I'm really over thinking this lol.
@@ladyattis Ion generators use graphite fibers that have thousands of tiny points to allow high corona currents at lower power.
@@PlasmaChannel now build it
apparently they exist www.etsy.com/listing/807877942, if you used that and a small high voltage supply you could make a really cool portable sterilizing pen!
You may use the small circuit boards in plasma globes, they are small and have a output of about 2000V, you may increase the voltage also according to your needs. It will make your wand battery powered and portable
You stay classy. I feel the value in your work. Love this. And I love your "ok let's do this attitude"❤
You should try a cold plasma antennas pointed at each other with one set at 180 degrees out of phase and the other normal. Then put your plants between the antennas. The results are amazing. Heck one hour between the antenna and you will feel the best you have in years. I love seeing science in action keep it up.
I love high voltage projects, and I've been playing around with them most of my adult life (I'm currently 74). For the past few years I have been experimenting with exploding bridge wires (look it up). But, I don't use bare wire like most people have done in the past, but rather I use thin insulated wire. I place a white card under or next to the wire, then dump a 100uF at 4KV capacitor across it using a triggered spark gap. The sound it makes is like a large firecracker or gunshot. But the most interesting thing is the weird patterns it creates on the white card, which is from smoke and vaporized wire. Let me know if you want more details on this fascinating project.
What wisdom would you offer someone just getting started?
@@stevenheiser6888 -- NEVER, NEVER, NEVER grab anything or any two things with both hands. ALWAYS grab things with one hand at a time, even when you are certain the power is turned off. The reason is if you get shocked through one hand, it will hurt like hell and will potentially destroy your hand, depending on many variables. But if you get shocked through both hands, electricity might take a path through your body and across your heart. Need I say what the result might be? If you learn nothing else, please learn this before you decide to play with high voltage equipment.
Now this is probably one of the most interesting things I've learned in a while. Very interesting stuff. Great video, cheers!
Thanks! Feel free to share, so that others can enjow as well
This is so cool. If they’re safe to use, everyone should own these
I work at a hospital as an electrician. In our Engineering Department we have to provide Medical Grade Helium to the Surgery Department. This would be neat if they use helium in this regard as well. I've heard they also use helium to pump organs needed with gas for inflation as well. Cool stuff. Helium tanks also have different output threads as well. Helium tanks in the gift shop and helium tanks in the surgery department have different threads. One is female and the other is male. Makes sense. Great video. God bless 🙏
Ok but if it kills bacteria by oxidizing DNA, why does it not do this to human cells? Is skin impermeable to the plasma?
My guess is that the cell membranes on uekaryote cells is far better protected, and we have so many cells that a few dead ones will not be a big deal.
It does. He's completely overlooked the idea that ozone is what the "active ingredient" is here... the helium is pointless. The oxygen in both the tank (yes, the helium tank) and the air, are supplying what's necessary to make ozone, a potent disinfectant.
@@MadScientist267 The plasma isn't oxygen plasma though right? It's still hydrogen plasma that generates O3?
@@SubvertTheState No. There's no hydrogen in ozone. O2 becomes O3 by adding another oxygen atom to it.
@@SubvertTheState If you are referring to the helium, that's "part of it" but not chemically. Helium makes a good striking gas; it is just facilitating the ionization. When the plasma is present, the flying electrons have enough behind them to break O2 bonds, and the free oxygen atoms that result find regular O2 and react with it. The helium is basically just a medium for this to take place in. It isn't absolutely necessary, but it will take a higher voltage to get a similar corona discharge that creates the ions without it. Things would also be a bit different if you were to use pure O2 as the feed gas for this lol ozone in quantity isn't friendly.
This blows my mind! I want to build one. You should definitely build one with an onboard power supply. Thanks for making fun quality content.
That’s awesome. Great topic. You should definitely build a all in one wand.
That is a really nice build, You should make a portable wand out of that!!! Stay Classy My Friend!!! 🦆
Yes he definitely should build a power supply into the wand.
Yes. Do a portable one, please.
@@Justin-dv7ul He is talented with High Voltage and Acrylic...😁👍
I'm a first-time watcher and I must say I am totally at awe with your video I would love more on this topic
Interesting that the effect is so specific for the area that it touches, but it makes sense. Heat would radiate out, which wouldn't happen with cold plasma. Useful if you don't want to disturb the natural flora of the skin around an injury while sterilizing the wound.
What an awesome design! Looks great and it's made with affordable or easily obtainable materials *and* it's beneficial to our health!? Can't get much better than that...I would like to make one now to try on wounds. I imagine that it would work really well on disinfecting infected wounds too. If so, then we know the cold plasma would work wonders with acne or any other minor skin infections.
There's no evidence for anything you just said/claimed. Don't slice yourself to experiment with this bogus crap. These claims are 100 years old.
This is really cool! Would love to see a build with an onboard power source.
Hmm, I wonder what other applications this could have? Maybe some sort of plasma-lithography art? Rapid glue hardener? Hair removal? Plasma tooth brush? Could it change the taste of food? Does it cause certain chemicals to change color? Could it be used to precisely spot-measure a material's oxygen sensitivity? How much further would it extend if you implemented a laminar flow nozzle? What if it is used with helium mixtures containing other gasses? There are so many possibilities!
From other comments I read, it sounds like different gas mixtures require different electrode densities, voltage adjustments, or both.
I think it's possible to print electrodes on acrylic and switch how many turn on or off.
To find out, I'd check to see if anyone has made a circuit printer that accepts an acrylic substrate. Otherwise an acrylic glue mixed with the right density and homogenous mix of conductive particles applied to a mask may work for nice lines.
Those recipes for conductive ink made compatible for acrylic would be nice.
@garyrich2000 I have to say that your suggestion is actually valid, raises relevant and interesting points, and builds upon the topic of the video and also in line with the comments and/or questions in the thread, to the point where I forgot my own, and found myself saying, "Hey that's sounds like a possible . . . Yeah! What he said!? Somebody do it!!" Lol
@@tomconner5067 I just watched this video again and I noticed him saying helium was selected because it is easily conducts over other glasses. So I wonder what happens if Ionized air is fed into the pipette?
I would love to see this used on pediatric patients for more invasive lacerations, breaks my heart having to sterilize wounds using stuff like alcohol so seeing this standardized would be amazing. Thanks for the video, learned a lot.
8:20 if you cover a surface wound with plasma activated oil, the wound heals up to twice as quickly as a non-covered wound due to the oil encouraging the production of collogen as well as the plasma activated oil performing the same sterilisation as direct plasma treatment.
Would you consider producing a how-to-make video on this device? I'm getting older and wound don't heal as quickly they used to. I'd love to have one of these at home.
So cool to see my PhD subject inside a RUclips video as yours ! Hope you will try a dielectric barrier discharge torch soon (way safer and in my sense even cooler). If you need more scientific explanation just ask.
That’s super interesting! Can you please provide a link to your paper? Put it here so others can read it!
Sounds cool
Alas no paper
im asking....
@@PlasmaChannel thank you , much appreciated
I think an onboard voltage source would be cool. But can you also do an onboard gas source for a fully portable plasma wand?
That’s really awesome.
the third cold plasma happened to get fungus growing on it instead of just bacteria. Most fungus is bad at competing with bacteria, but some strains can manage to win out despite the conditions and nutrients being less than ideal for fungi. Fungi prefer wood and phosphates instead of agar, but they'll still eat it up and grow if need be.
Bio electromagnetic healing is a cool topic Jay. And yes, add a power supply such as an arc lighter and mini Helium tube for a portable design.
I'd like to see this in a videogame, and if high-tech healing made up a large part of gameplay mechanics, that would probably add to the fun factor.
Mercy from overwatch
Medic tf2
Damn you beat me to it and i am glad you did. I was going to try heated salts vapour in a tube and see what happens as well. Maybe that might be something your interested in . I hear borax works well too.
Imagine creating a lightsaber that repelled eachother but passed through a person everyone could have the most epic light saber battles
I really enjoyed this video. I don't even care if the results weren't as good as you anticipated (visually underwhelming as you referred to it), I just enjoying watching stuff being built like this.
Maybe I missed it, is helium the only input gas that can be used? (I thought that stuff was becoming scarce?
Yes, please do a build with the power source on board. Love the video bud, you're a smart man with an intelligent knowledge base and have an informational delivery capacity to better elaborate on things to where the result, I find, is much more in need in this world. Thank you for the interesting video and you did a great job explaining things better than most. It is nice to see and therefore, making subjects more understandable. Makes the world more of smarter place hypothetically because the results would show "wisdom is love and intelligence" yet it needs to be learned. "None the wiser" is a saying but none the wiser could also mean "never learned" as well as "unwilling to learn" but that would bring up a whole other hypothetical topic such as knowing and not yearning for better. 😏 Keep it up brother. ✊👍📊🎯📈
Great build, what if you use air, oxygen, argon, co2 or hydrogen instead of helium?
And yes, please make it portable
Argon is the next most used gas.
@@PlasmaChannel Would argon be better to use? I mean it is cheaper and can't escape as easily
the oxidative features are provided by the application of hydro-ionic superfluidity rather than the plasma itself.
The same effect can be achieved through induction of electrical current to a wound or organ.
Microbes tend to dissolve under repeated duress of hydrogen concentration imbalance,
particularly if they lack sufficient surface area to share the load of voltage discharge that social eukaryotes have. Great replication video
I have seen the future and it is a beautiful thing. This is especially true when it comes to the potential healing properties of cold plasma. I first encountered this technology while attending a medical conference in Las Vegas a few years ago. A small company called Quark Enterprises was demonstrating their new product, the "Cold Plasma Wand." It is a handheld device that emits a stream of cold plasma. I was skeptical at first, but after watching them use it to heal a deep cut on someone's hand, I was sold.
Since then, Quark has continued to develop their technology and has now unveiled their latest creation, the "Powered Tesla Coil." This device not only emits cold plasma, but also generates an electrical field that amplifies the healing properties of the plasma.
Cool! A question, though: is there any benefit to the sterilization here versus the ozone sterilization you demonstrated before?
"Reactive oxygen species" sounds like ozone to me, but I'm not fluent in chemistry. Is there a difference?
Hi Nathaniel, ozone is a massive component to the "reactive species", however, ozone does not account for the reactive nitrogen species component. You can have ionized oxygen not form into Ozone as well.
Cold plasma only adds an electron to the gas molecules, so instead of splitting oxygen O2 into ozone O3 it creates anions O2-, N2-, H2O-, He- and so on. The ozone is poisonous and the room should be aired after disinfecting with it. But these anions are harmless and they are actually found naturally in fresh air. There are home ionizers available that can make them without visible cold plasma and no need for helium. I am using one at home and it helps with my pollen allergy as the electrical charge pulls dust down (ozone won't do that because it's electrically neutral).
It's a common misconception that ozone is toxic; while it is a potent oxidizer, which means that it can break down cells, it would take a ponderous amount of ozone over many, many half lives to cause a healthy person harm. It's great for cleaning air, though!
@@NathanielHourt there's plenty of cases and research of serious acute poisoning from ozone concentration over 1ppm. Which isn't "ponderous" at all.
Sure, but if I had a dollar for every study with weak conclusions... Ehh, you see where this is going.
As always, be aware of your individual tolerances, but as for me and my familiars, we've never seen ill effects from the so-called dangerous levels of ozone put off by commercial ozone generators, even after hours of exposure. I can't speak for those who have had issues, but I do suggest that there's more to be understood about it than the usual alarm bells would have us assume.
what frequency did you eventually use for the pancake generator? (if you're taking a poll, I'd vote "YES" for the hand-held cold plasma wand 😁)
Atmospheric cold plasma with air would be great!
That’s beautifully awesome! I wonder what role ozone plays in these experiments. It’s certainly a byproduct of plasma.
Ozone disinfects. But mixed with air and breathing creates harmful compounds.
I don't believe the helium gives up the radical oxygen atom during the plasma generation, since it's only changing the state of the matter not it's molecular composition. Just my hypothesis, and I'm basing this on part of a single lesson during a fraction of one day in my public school eucation 35+ years ago, when all I had on my mind were girls, music, wrestling, girls muscle cars, and girls. So look into it and let me know if that brain cell is still glitch free or if I need to clear the cache, I slept the whole time every day during that class and still managed an A on the midterm and final exams. No I didn't cheat, my mind somehow retains things I hear when Im asleep! True story.
@N Esq that O atom wants to attach to another atom in the worst way!
@@tomconner5067 HAHAHA!! 🤘🤣🤘
@@tomconner5067 for sure
oh, nice! especially when achievable at home. the failures shown only add value as they advise of not to do. thanks for exploring it for us
Yes, I do like what you developed and like to see more.
This is probably one of the key technologies for the close future - lets say next 10 - 15 years.
Let me guess the disadvantages I can think of:
1. There is no housing which sucks air in with zero velocity and mix it with already accelerated air. Furthermore accelerated air will exit the main "power" stream.
2. through the design much acceleration will be created but the aerodynamics isn't good so efficiency will decrease.
3. Though the thick ground tubes even more swirls influence the efficiency even more. I would use wires too, instead.
4. Probably two stages are as efficient as the tree. Though I would reduce the ioniser to save energy and weight.
What else do I recommend:
1. support laminar flow right from the beginning and through the housing
2. using the "Dyson fan effect" which sucks up to 15 times more air with the generated air stream, which is used for aviation of electrical aircraft engines under development.
medic tf2 irl
Shit that's unfeasible... helium is just too rare and non-renewable to be used like this especially like this.
Well, helium is totally renewable, it just takes a lot of electricity.
@@PlasmaChannel "In addition to being rare, helium is (mostly) not a renewable resource. The helium that we have was produced by the radioactive decay of rock, long ago. Over the span of hundreds of millions of years, the gas accumulated and was released by tectonic plate movement, where it found its way into natural gas deposits and as a dissolved gas in groundwater. Once the gas leaks into the atmosphere, it is light enough to escape the Earth's gravitational field so it bleeds off into space, never to return. We may run out of helium within 25-30 years because it's being consumed so freely. "
As far as I know we can't produce enough to cover demand...
@@Fuxy22 lol
‘That’s what’s the comments are for’
*Shows the biggest pile of trash on the next frame
ikr xD
I work in this field and love your design specially connecting to Tesla coil… interesting… it’s really good DIY and very informative… fantastic project for students…
We need another wand!
I have shared your video with almost everyone I know including the top tear of a multinational tech company, the basses of whick are my friends. Love the subject & how you made the cold plasma torch come to life to save lives. It will be invaluable for future space flights.
I’m curious if the cold plasma affected the nutrients in that center region’s gel instead of sterilization. Like denatured proteins or something. The bacteria growing on the outside untreated area should of been able to move in but something about that center area’s gel wasn’t the right conditions to grow in. Also on another note, especially with treating wounds, there’s a chance radiation from the cold plasma could create thymine dimers and dna damage is especially high risk in damaged areas where new skin cells are growing and could increase the risk of cancers.
Exactly. This wasn't sterilization, or it wouldn't have grown elsewhere in the dish.
1:20 "its practically touchable"
*touches it*
pretty sure it's definitely touchable :D
Great job!
I had a HeNe gas laser I had purchased from a scientific supplier some time ago.
I didn't know at the time you should keep it running.
After a while it would not start.
The only way I could get it to work is put it in the freezer for about an hour. Then turn it on voila 633 nm at .33 mws.
In my experience, door handles* are perfect things to swab to get a variety of strong bacteria.
As you learned, hands aren't great sources for getting bacteria, as they're washed regularly.
5:17 I'm here rewatching 3 years later (after just watching your most recent on using cold plasma on seeds) and I see my comment from 3 years ago saying "yes build one with onboard power supply" 😂
Yet we haven't seen one yet! 😅
It's been 3 years man!
🤣 I jest. You've been killing it man! Keep it up!
Thanks for doing this project! You provided me with the solution to a problem Ive had for a few years!
Hypochlorus Acid (HOCl) is a fantastic sterilizer. It is also created in our bodies to fight infection. It's very inexpensive to make at home; distilled water, distilled vinegar and a bit of kosher salt. This mixture is then electrolized. I know this is the plasma channel, but HOCl is very transportable and very safe.
New favorite channel
To an isrealite this flame is more priceless than gold
I have a few suggestions to improve the cp wand. First, try steel wool. Fill the pipette loosely with it. This gives more contact with the helium. Second try increasing the flow rate. More gas, more pressure, and hopefully more plasma.
And third, try different nozzle shapes. Is it better with a thinner wider opening like a brush, or many smaller holes bunched together.
Also, for the cultures I'd suggest using yeast and a agar medium. If agar is unable use gelatin mix you can find in the preservatives sections of the grocery store. Mix it a bit of sugar and broth. It should show up nicely.
That was so freaking cool. Cold plasma. That's freaking neat.
nice job. id liek to see you test the conductivity of the cold plasma along its direction of flow.
Very cool ....
There is a relatively inexpensive device advertised as being used for skin tag removal that has a high voltage system/wand. You might check that out. You now would need an He source ......
07/29/2023: Amazing! I have a tank of Helium in my storage area along with a few HV sources. I definitely want to try this. Thanks!
Makes me so glad I bought my Plasma Lamp💙
Excellent expose of all the steps and outcomes. I loved it!
This would be excellent to possibly treat diabetic wounds! Very interesting!!! TY!!!
it's healing properties are insane! its amazing to practice medicine!
This is amazing. I would totally build one of these right now if i had the helium. Also, those mystery blotches on the last plate are fungal colonies - a couple of airborne spores probably landed in the dish and grew.
Damn, Jamie Lannister here introducing us to plasma torches after an... AHEM* family meeting
That was cool. And this is Star Trek medical in its infancy. I love this part of science ❤❤❤
These videos are very high and quality. This is fascinating
Thanks for another great video.
My feral kitten really liked watching it
Got to enjoy the evolutions of your project & learn a touch of details about a topic outside my relam. Thank you