I've been doing my own remelts for the last year a little advice don't inject it so hard go slower with the senkos and when you feel that pressure stop injecting and keep steady pressure on the injector handle for a few seconds than top off the screw untill it stops getting sucked down
Thanks for the tip!!! I’ve figured that out since this vid came out! But it was definitely a learning curve! Go check out my brushhog mold vid... I burned the tar outta my leg!!!
Maxey Adventures I did add some salt to the next batches I poured. It seemed to help... The video of me fishing with them is coming out this week... Stay Tuned!
Lol found ya by random searching. Great work sir! I have been doing this for some time. And you'll get it all dialed in soon..keep an eye out for "clearance" soft plastics.. excellent remelt opportunity
When you inject the plastic, hold steady pressure for 10-15 seconds, then top off the hole so it doesn’t drain into the mold, that helps to prevent air pockets and denting Edit: Tighter clamps will help with the flashing you get
Anyway to make the baits shine? the essential series molds isn’t aluminum it’s sand cast so it doesn’t have shine. If anyone knows how to get around it that would help
@@j-hookfishing9745 Idk.. I just feel like they usually are more shiny i.ebayimg.com/images/i/321634136429-0-1/s-l1000.jpg like those in that random image I found. The mold isnt aluminum so i think the sand casted mold takes away the shiny and leaves a dull finish.
@@miner-fo9be you Can oil them to get a bit of a shine but you are right. If it’s cast they are more dull. To get a good shine you really need the machined molds that are obviously more pricy.
www.tacklewarehouse.com/Do-it_Soft_Plastic_Mold/descpage-DOITSPM.html?from=gshop&gclid=EAIaIQobChMI1OesivLg6gIVC43ICh3YLAuFEAQYAiABEgLa-fD_BwE Here’s the tackle warehouse link. It may not be on amazon anymore...
Gotchya! www.tackleunderground.com/community/topic/6140-how-to-get-glossy-lure/ Here’s a link to check out! I may give some of mine away in the next giveaway at 500 subs! Stay tuned and spread the word!
Hey guys! Make sure to subscribe and let me know what mold I should do next! I have a video of a brushhawg mold! I burned myself pretty bad and caught a 5 pounder off of that bait!!! Thanks for subscribing!!!
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Hint for the Ozark Trail 5 Lure Challenge giveaway: It’s NOT 0 and it’s not 5!!! Good Luck!!!
Just ordered the finesse crawler version of the mold, thinking about starting a recycled soft plastic small business. Wish me luck!!
Michael Garcia I’ll be your first customer bro and good luck btw
Sweet! Let me know how it goes!!!
Wow only 235 subs! You deserve way more man! Great content you gained a new sub my man! Fish on!
HyPe Flexx Thanks man! Spread the word! I got a new vid coming out tomorrow at 6 pm. It’s gonna be a good ‘un!
I've been doing my own remelts for the last year a little advice don't inject it so hard go slower with the senkos and when you feel that pressure stop injecting and keep steady pressure on the injector handle for a few seconds than top off the screw untill it stops getting sucked down
Thanks for the tip!!! I’ve figured that out since this vid came out! But it was definitely a learning curve! Go check out my brushhog mold vid... I burned the tar outta my leg!!!
I’m gonna have to try this never thought that I could use my old plastic lures to make new ones.
Maxey Adventures I did add some salt to the next batches I poured. It seemed to help... The video of me fishing with them is coming out this week... Stay Tuned!
Lol found ya by random searching. Great work sir! I have been doing this for some time. And you'll get it all dialed in soon..keep an eye out for "clearance" soft plastics.. excellent remelt opportunity
Rob Norton Thanks man! I’ve a got a pile of senkos stockpiled! I just ordered a brush hog mold! Stay tuned!
When you inject the plastic, hold steady pressure for 10-15 seconds, then top off the hole so it doesn’t drain into the mold, that helps to prevent air pockets and denting
Edit: Tighter clamps will help with the flashing you get
Thanks for the help Maine!
Deciding if I should get one
How much Did you Pay for The injectable and mold?
I don’t remember off the top of my head, but I believe I say how much I paid in the vid... I think I had some Amazon gift cards???
Do you have a link for the mold on amazon
I didn’t get it on amazon... I couldn’t find it on there... i bought the injector on there though...
Did you get it at door molds
I mean do it
I got it at barlowstackle.com
Anyway to make the baits shine? the essential series molds isn’t aluminum it’s sand cast so it doesn’t have shine. If anyone knows how to get around it that would help
Not sure what you mean by shine...??? Post a link of what you mean...
@@j-hookfishing9745 Idk.. I just feel like they usually are more shiny i.ebayimg.com/images/i/321634136429-0-1/s-l1000.jpg like those in that random image I found. The mold isnt aluminum so i think the sand casted mold takes away the shiny and leaves a dull finish.
@@miner-fo9be you Can oil them to get a bit of a shine but you are right. If it’s cast they are more dull. To get a good shine you really need the machined molds that are obviously more pricy.
You need to wear a respirator when doing that, the fumes are really toxic and not good to breath in.
I got one, thx for the tip!
Hey man I have been looking for a mold but I can’t find one on amazon and every other site is sold out
barlowstackle.com/Do-It-Essentials-Senko-Molds-P3688/
Here ya go! Let me know how it goes!
Ebay
I couldn’t find that mold on amazon
www.tacklewarehouse.com/Do-it_Soft_Plastic_Mold/descpage-DOITSPM.html?from=gshop&gclid=EAIaIQobChMI1OesivLg6gIVC43ICh3YLAuFEAQYAiABEgLa-fD_BwE
Here’s the tackle warehouse link. It may not be on amazon anymore...
Where do I buy this?
barlowstackle.com I’ve bought some molds here!
Are you still using this mold?
Yep! Is there something you want me to film with it?
J-Hook Fishing I have the same one, I block off the 4th senko and do 3 at a time to make sure there is no dents on the 3
What do you use to block it with?
J-Hook Fishing a senko, if it doesn’t work by only blocking off 1 try doing 2
Good idea! I’ll have to try that if I start getting dents again... I thought I was getting that due to getting the plastisol too hot! 🥵
Wow. I’ve spent almost 200 for all that gear
You must be from south Louisiana
Making your own baits is the way to go! I’m from Georgia!
Gotchya! www.tackleunderground.com/community/topic/6140-how-to-get-glossy-lure/ Here’s a link to check out! I may give some of mine away in the next giveaway at 500 subs! Stay tuned and spread the word!
Hey guys! Make sure to subscribe and let me know what mold I should do next! I have a video of a brushhawg mold! I burned myself pretty bad and caught a 5 pounder off of that bait!!! Thanks for subscribing!!!
I was looking for this mold and found one that was 40$ was that it?
Most likely you can find them for 30-50
Yea... that was probably it!
Did you have to buy the injector separately?
Yes
How big is the injector
It holds 6 ounces.
Your no supposed to use those claps it’s bad for the bait
Activity Bros huh?!