Это видео недоступно.
Сожалеем об этом.

Battle Of The Bait Molds!! Cast Aluminum vs Stone vs CNC Aluminum

Поделиться
HTML-код
  • Опубликовано: 23 окт 2020
  • Affiliate link for AWESOME Pigments:
    www.dipyourcar.com?ref=774
    Welcome to the World's Worst Fishing! We are a fishing-centered TV program that does its best to bring you great fishing content & soft plastic bait making tutorials! We hope to provide our viewers with content that is fun, creative, informative and most of all entertaining. Sit back and watch us bring you the world's worst fishing!
    We make fishing lures and soft plastic baits. You will find lure making tips and techniques as well as mold making tutorials and color ideas for your lure making
    Warning: Making Soft Plastic lures can involve high temperature liquid plastic under pressure and is inherently dangerous if spilled or mishandled. Proceed making lures at your own risk.
    Visit us on Facebook & Instagram!!
    LIKE & SUBSCRIBE
    #luremaking #baitmold #fishing

Комментарии • 341

  • @WorldsWorstFishing
    @WorldsWorstFishing  3 года назад +14

    Stay tuned for the end where we BURN our plastic and one the molds goes bye bye!

    • @tumbleweedoutdoors1776
      @tumbleweedoutdoors1776 3 года назад

      I wish I could afford plastisol :( I can’t afford it so I do remelts only so I am extremely limited on my color choices

    • @d.moutdoors4377
      @d.moutdoors4377 3 года назад

      Oh yeah

    • @marctheriault
      @marctheriault 3 года назад

      @@tumbleweedoutdoors1776, $35-40 bucks for a bottle and shipping can make a lot of baits.

    • @marctheriault
      @marctheriault 3 года назад +1

      A flat screwdriver to help twist is probably the purpose of the slot with the stone mold.

    • @tumbleweedoutdoors1776
      @tumbleweedoutdoors1776 3 года назад +1

      @@marctheriault I know I just barely have any money and I’m in the process of making a swim bait mold with a fellow bait maker so I’m saving my money to get the final product turned into an aluminum mold

  • @4kBrady18
    @4kBrady18 3 года назад +6

    My stone works perfectly fine. You simply just didn’t prep them correctly. I’m sorry but I can’t afford a $150 mold so I have to use my $20 ones

    • @Thegolfkid1
      @Thegolfkid1 7 дней назад +1

      Yes finally someone who is realistic

  • @WorldsWorstFishing
    @WorldsWorstFishing  3 года назад +6

    Thanks for watching...what are your favorite type of molds??

    • @jacobcarter9242
      @jacobcarter9242 3 года назад +1

      I don’t do any my self but I think the open pour look the best

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      @@jacobcarter9242 yeah hand pour is king 👑

    • @jacobcarter9242
      @jacobcarter9242 3 года назад

      @@WorldsWorstFishing yeah and I’m not 100% sure but it looks like you can do a lot more designs with a open pour

    • @dirtyfisherman9188
      @dirtyfisherman9188 3 года назад

      Hey man how can I get intouch for some baits?

    • @01Brever
      @01Brever 3 года назад

      Angling AI can’t be beat IMO. Glad you did this video because I was wondering how the stone molds work. Now I know they’re trash! Lol

  • @Grahamwilde20
    @Grahamwilde20 3 года назад +24

    You Won’t believe what happen my teacher said that I can do a presentation of making baits for entrepreneurship unit because I sell them and she wanted me to show the classes how I made money off a hobby

  • @kbody_slade
    @kbody_slade 3 года назад +8

    I started making baits today and I owe all the fun to you, I only burnt myself twice

  • @jaakkoteppo8376
    @jaakkoteppo8376 3 года назад +6

    I have cast quite a lot of baits with those baitmold.com 'stone' molds. They have to be brushed with worm oil every second or third cast, then there will no sticking issues. The first casting with a brand new mold is always a little tricky even if properly oiled. The biggest number of castings per mold I've done is roughly 500 and there has not been any visible signs of the mold being disintegrated but I don't suppose they will last forever. They are an inexpensive choice when making baits for yourself, but not that great for any bigger production obviously. Anyway, I'm more than satisfied with the molds, comparing the price vs. the result and also the fact that they have molds for many of the catchiest baits. If I could get the exact same molds in cnc-milled aluminum, I would not hesitate buying them.

    • @ruffnut743
      @ruffnut743 3 года назад

      i use them stone molds as well i use silicone spray it works very well

  • @ZacksRealAdventures
    @ZacksRealAdventures Месяц назад

    Whoa, another drummer who loves fishing and making baits. Cool stuff man.

  • @dennishodson990
    @dennishodson990 3 года назад +1

    In both of your stone mold pours, I noticed trash in the tail that didn't pour correctly. Look back in your video. I have made several Alumilite Vac 50 molds of baits that I should not name and had to work on to get a functional bait. I do this because I choose to spend $$ on other toys. I have two stone molds and three more on the way. I really don't have a problem with them. The Bass and Crappie sure don't. Of course, I don't sell these and have to have the $$$ look. Still love you're channel and get notifications of every one!

  • @artfanatic405
    @artfanatic405 3 года назад +2

    This video was so helpful. Thank you. I have been wondering the difference between each of these for so long

  • @kayakingwithkevin303
    @kayakingwithkevin303 3 года назад +3

    I sprayed my do it essential molds with high temp engine paint. Huge improvement over how they finish baits.

    • @tnoutdoors3820
      @tnoutdoors3820 3 года назад +1

      I was wondering if the paint was still holding a good finish?

    • @Bhurt2
      @Bhurt2 2 года назад

      Me too, I’m wondering myself

    • @Samuel-kz3vo
      @Samuel-kz3vo 2 года назад

      Is the paint staying

    • @kayakingwithkevin303
      @kayakingwithkevin303 2 года назад

      Yes. Paint has held up good. I don't make large quantities. I'd day I've made over 500 baits with mold and paint is still good. Just clean mold good before painting and use a high temp gloss paint.

  • @larrycorley2470
    @larrycorley2470 3 года назад +3

    Good video! It was great to see the finish difference between the molds. I have been using the “stone” molds for 2 years I do have to oil often and over oiling can create problems with swim bait tails and creature bait flaps but over all I have figured out a technic to get pretty good baits ever time. All that being said I don’t sell my baits I got into it to make what I want for tournament fishing. But after seeing the finish difference I might buy one of the CNC molds just to compare how much it affects the color tones I make might be a big difference and a game changer ! Again great video!!!👍

  • @joeschlabotnik2401
    @joeschlabotnik2401 5 дней назад

    I started making my own lures recently. I did not want to invest a lot of money so I went with stone molds first. Have to say they work great! Just have to keep them oiled up. I use oil butter spray and also let the molds cool down if I am making a lot of lures as they tend to stick for some reason. I have also made my own molds and they came out okay. Not perfect but I am catching bass on them all which is really cool

  • @greatwhitesfishingadventur2273
    @greatwhitesfishingadventur2273 3 года назад +7

    The old additive : You get what You Pay for !!!
    CNC Aluminium, will always be the BEST !!!
    I would suggest you save the hard earned, and start off with one CNC Mould ...

  • @hashimotoconcepts
    @hashimotoconcepts 3 года назад +1

    Great information, especially for someone who is new to soft plastics. I can see how they may think that starting off with the cost effective mold would be the best option however the cost is made up in replacements from damaged molds. hope this saves someone money in the long run.

  • @rdo6566
    @rdo6566 3 года назад +1

    I think they all have there uses. If you are making and selling then CNC is likely worth the investment. If you are doing it for yourself to fish with and maybe give a few away then CNC is not going to catch you any more fish than a properly poured bait from a cast or stone mold. There has been tons of fish caught on baits from Do-It wast molds. We are making baits to catch to a fish not curing cancer. I think sometime we lose sight of that aspect when dumping $200 (off the shelf) to $600 (custom) on CNC molds when you can get custom stone made for normally less than $100 from companies like Bug Molds on eBay.

  • @gpharned
    @gpharned 3 года назад

    THANK YOU CHRIS! You have taught me so well and saved me $$! I first started with pouring Do-it lead molds, excellent products. So naturally went with Do-it soft plastic molds. They worked OK. Lots of denting and learning curves. Do-it injector is really a problem for newbies. Dangerous by blowing the tip off (no pins) . I honestly would never recommend that injector. I purchased a AI mold thanks to you and what a difference, night and day. Now I am building my collection of quality molds. I am no Pro but I recommend waiting until you can afford a quality CNC mold from a reputable maker. I borrowed a stone mold from a friend and with proper oiling (I actually use WD-40 ) it pours very well, especially for less than a $20 price, but it does have limitations such as over heating and needing oiled every few uses.

  • @albow4oops5
    @albow4oops5 3 года назад +1

    Just starting out and I use stone.. because it's cheap. I've shot three styles of bait and I get decent results. Mine are off of Amazon, they have toggle pins and seal fine. Two have stone pins, one has steel. While I agree that cnc must be better, I have had no issues with mine. I preheat mine on a heating pad and have fewer issues with differential cooling dents. Oil and plastic durometer have a big effect on the shine of the end bait. I will be getting cnc molds, but for now the stone molds work really well. I shoot stick baits, a punch style craw and a very complex creature bait with a core shot pin. The only release problem I have is on the rear flappers of the complex creature, but if I oil every third injection it's fine. None of this is to disagree with you, you clearly have more experience and knowledge than I do. Your channel is why I inject/ pour baits, marling taught me to make wooden baits. You both are great resources. Thank you

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      Glad you found a way to have success! Thanks for watching my channel

    • @MrCami2
      @MrCami2 3 года назад

      Your description about stone molds is the most realistic one that I found till now

  • @mylesgalle7025
    @mylesgalle7025 3 года назад +5

    With the stone molds I have noticed 3 things. 1it is a lot easer to open once you use it more. 2 it opens easer when it is a single Bait in the mold not 2 like that one. 3 I haven’t notices the molds melt or get damaged when you use it a lot, I have used the same mold of at least 250 runs and is not damaged. I think that it is ok to use the baits. I have never oiled the mold and it works good. It is a good material for entry level bait makers and they are cheep compared to the CNC miles aluminum. Good video though

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      Interesting... everyone else I have spoken to in my bait making career has had trouble with stone..to the point they abandoned them.

    • @MrCami2
      @MrCami2 3 года назад

      @@WorldsWorstFishing are you talking about home made Hobbysts or Producer?

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      @@MrCami2 nobody I know running real production uses stone, they hold heat too long to efficient and require lubrication often, every experienced home bait maker I know has moved on from stone molds to better things.

  • @iwantosavemoney
    @iwantosavemoney 7 месяцев назад

    I bought my first sinker molds a wail back for a few 100 dollars and some jig molds and they where do it molds and what I do is pour in one pour enough to pay for the mold it’s self but I guess with plastic molds that probably not possible or productive because you don’t want a bunch of the same stuff like you would with weights and jig heads I love having bulk items that actually save me money. But I think am getting more into the hobby and trading saving money for having the versatile to change colors and the add actives and truly make a different bait in the same mold is awesome.

  • @stacyhunter7171
    @stacyhunter7171 3 года назад

    My 14yr old started making his own baits about a year and a half ago and has 4 or 5 of the stone molds. The first few pours were sticky but then it went away. He's never used any oil. They are only single and double cavity molds and he does use plastisol.

  • @johncox5681
    @johncox5681 3 года назад +1

    Hey Teach. I have a stone mold from Best_nj on amazon. It is a 1 cavity mold that pours from the top. It is a 4" craw mold and it pours perfectly. It also does a great laminate. I don't use worm oil though, it is too expensive. I just use the cheap spray cooking oil. It also makes the bait shine. But mostly I use cnc aluminum molds because you are absolutely right, They are the best. Thanks for the video, it was good to see the differences for people just starting out.

  • @danieleatherly1135
    @danieleatherly1135 3 года назад

    Chris in the pst I have used do it molds they are ok but your right the finish is full but I never used stone molds was thinking about trying them but thanks to you I will not be wasting my money on them!!!! Thank you Chris!!!!

  • @jeffflinton7540
    @jeffflinton7540 3 года назад +2

    that Bass tackle ribbon tail is one of my favorite molds to shoot it makes an armature hack like me look like i kinda know what im doing !!

  • @markchase9299
    @markchase9299 3 года назад +1

    I have a few of those stone molds. I use mold release spray you can get at any hardware store. Works 100% better than the oil. They come out of the mold very easy. I will not buy anymore of those because the aluminum ones are alot easier for sure. Thanks for the videos Chris.

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      Yeah I've heard oil works well and cooking spray..I def didn't have much luck with that swimbait lol

    • @markchase9299
      @markchase9299 3 года назад

      @@WorldsWorstFishing i guess thats how we learn lol. Still was fun to watch.

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      @@markchase9299 I will modify my casted aluminum molds for better performance, but I most likely will not ever try a stone mold again.

    • @markchase9299
      @markchase9299 3 года назад

      @@WorldsWorstFishing i don't use mine anymore either. I have one of the sand cast too. Was my first one to get my feet wet. Can't wait to see what you do with it.

  • @fabulous7567
    @fabulous7567 3 года назад +2

    Really like the comparison of different materials for mould making. CNC looks to be the clear winner all around even though the cost is at a premium.

  • @zacharykeller7067
    @zacharykeller7067 3 года назад +2

    I have a bunch of the stone molds and I have never oiled them and always get great results i think they are worth the money just my opinion

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      You are definitely the exception, glad they are working well for you.

    • @MrCami2
      @MrCami2 3 года назад

      @@WorldsWorstFishing or perhaps you need a little bit training to use stone molds, for instance using a brush to oil them and not leaving oil inside tail cavity. To open them a flat screw driver gently twisted in the slot is the right procedure

  • @stillkickingfishing
    @stillkickingfishing 3 года назад

    As an entry level, soon to be soft plastic lure maker, I feel so prepared thanks to you. I've watched about 70% of your videos and am still going.

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      Thank you sir, please share the channel with all your friends

    • @stillkickingfishing
      @stillkickingfishing 3 года назад

      @@WorldsWorstFishing I think my mother-in-law is the only person left and she's next. :D

  • @pistolpetepeterson
    @pistolpetepeterson 3 года назад

    Here is a soft plastic question for you. if you were to melt down and re mold z-man elaztec baits. Would they keep their super stretchy elastic quality and super buoyancy? What about other non plastisol baits? do they keep their qualities after being melted and remolded?

  • @glennluteraan4434
    @glennluteraan4434 3 года назад

    Hey Chis, as lot of people cannot afford the CNC molds, and may want to get multiple cast "Do It" molds for the price of one CNC mold, I think you'd be doing a great service to both the budget and start-up bait makers by showing various methods to tune/tweak the cast molds, to improve the quality of the baits and make the most out of what may already be affordable or owned. The high temp paint sounded like a good trick. Polishing with a Dremel type tool would be another. Get the "B" rating up to a "B+ or A-". You could use that multiple swimbait mold (granted, a worm or stick bait mold would be easier) and to a different method in each cavity and show the results of each. I think that would be something a lot of people would appreciate. Thanks for this vid. It was valuable information.

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      Yes I will definitely modify my cast aluminum mold and do a compare and contrast video

  • @spacecat86
    @spacecat86 3 года назад +1

    ive noticed my stone molds start to degrade just a tiny bit after a year of moderate use. not all of them though, some have started to kind of erode around the edges but the cavities are still good. I didn't have as much trouble removing them as you did but I oiled them at the beginning however I don't re-oil them all that much....im using small baits though and they probably don't stick as badly. I think they are great for the price but nothing beats a fancy aluminum mold....anyone reading this feel free to buy me some :)

  • @backyardhunter1036
    @backyardhunter1036 3 года назад +1

    Been waiting all day for this video to drop

  • @Rodbuilder109
    @Rodbuilder109 2 года назад

    I was thinking of getting into making some baits and this video helped me a lot. Thank you for all of your content on this topic. Love to see all the ways to get the baits colors.

  • @shaunmoeller3288
    @shaunmoeller3288 3 года назад +1

    I have a stone mold I use cooking spray on it and it works great

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      I would imagine with a more basic shape I would have had much better luck, but the tails on these are a very tricky design to begin with.. they would undoubtedly have issues even in CNC from time to time.

    • @MrCami2
      @MrCami2 3 года назад

      @@WorldsWorstFishing try again ... with more modesty

    • @shaunmoeller3288
      @shaunmoeller3288 3 года назад

      @@WorldsWorstFishing do you have a Facebook page I would like to send a pic of a bait I made

  • @fbisurveillancevan1635
    @fbisurveillancevan1635 3 года назад

    I have the 3.5 inch ripper cast 3 cavity. You can tell it was casted when you look at the finish on the baits, ill say that.

  • @slivers4007
    @slivers4007 3 года назад +1

    Yes you get what you pay for but......Some just can't afford $200.00-$300.00 molds. Most have to "buy" their molds? Stone molds can and do work for what they were intended for and for many will work fine (a quick spray of silicon works great and a wide blade screwdriver vs a butter knife to open). Do-It cast aluminum molds work great for what they were intended for (a quick spray of high temp paint, clean none mold surfaces voila gloss baits).. By the way take a CNC molded and a Do-It sand cast molded bait put them in water and see what the difference is, the fish nor most will ever notice the difference? If one follow enough forums EVERY company seems to have problems with lumps, bumps, etc.(operator error)? And how about you take one of those fancy $250.00 ** molds out back and smack it with a hammer a few times and see how well it holds up? As far as instructions.....hmmmm never got any with any of my expensive "name" brand molds. Other than that great video.

  • @backwatercatfishing4989
    @backwatercatfishing4989 3 года назад

    I have the bugmolds aluminum molds (just what I chose) they work just fine..
    Just have to wait on them to reach you is only down side..
    Never got stone molds..great video

  • @chucktimm9803
    @chucktimm9803 5 месяцев назад

    high temp engine paint i used gloss black in them both and pour very nice in my case

  • @bigkat650
    @bigkat650 3 года назад +1

    Yes! Thank you for this! I'll test my do-it molds and go from there... But I'm gonna avoid stone, that's for sure!

  • @customrodsandbaits8620
    @customrodsandbaits8620 3 года назад +2

    Good info! It’s only Ai CNC molds for me! They are the best out there 👍

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      Can't argue that

    • @DeeDee-vu5mi
      @DeeDee-vu5mi 3 года назад

      Likewise on the AI Molds. I have a 4" swimbait and the eyball mold....awesome. I do pour lead for some baits, therefore Do It Molds are used. I also have the Do IT 3" ripper so if your looking for a smoother finish bait, smoking the mold surfaces will help a lot.

  • @basscatlildave
    @basscatlildave 3 года назад

    Great comparison. I have a stone mold that I picked up on a deal from somebody with a little finesse worm it shoots OK but there’s nothing like the CNC

  • @richardorta8960
    @richardorta8960 3 месяца назад

    how would mixing styrafoam, packing peanuts, that foam they use for fake flowers work in the plastic?

  • @thedarkmittetoast7967
    @thedarkmittetoast7967 2 года назад

    This was very instructive because I plan to make my own plastics. I saw some mold of good bait, sold by bugmold ... but after your test ... i'm probably not .... after some research, I found CNC plastic mold ... what do you think about it ?

  • @kevinconrad7222
    @kevinconrad7222 3 года назад +2

    I Was just getting ready to buy my first mold, Thank you for this vid and saving me the money and most importantly the frustration of going with the stone that I was considering. I guess Like almost all things in life ya get what ya pay for. I’d rather save up and buy right and buy once. Instead of getting trash that falls apart. Merica

  • @DrillerAA
    @DrillerAA 3 года назад

    Is it possible to take a dremmel tool with their polishing pads and apply rubbing compound, then polishing compound and actually get a much smoother finish from the Do-it molds. Also, if you limited your purchase of stone molds to simple worm patterns would they be more successful? Just asking.

  • @FreedomFishing
    @FreedomFishing Год назад

    Have you had any stone molds from the baitmolds website that poured correctly? I just bought 2 from them (baits without a lot of detail) and need to check my drawers after seeing this video. 😯

  • @darrenhall7990
    @darrenhall7990 3 года назад

    On those type of stone molds...Elmer's concrete bond works real well.

  • @mikew7108
    @mikew7108 3 года назад

    i started using the stone molds and they do stick unless you use worm oil on them. i used the knife to pry on mine when they stuck and snapped the side of the mold off. they are a good starting option for low cost. just got a batch cnc from angling ai. appreciate all of the content and inspiration from your videos!!

  • @marctheriault
    @marctheriault 3 года назад

    First remark, not even 30 seconds in 🤣
    I love seeing you on the Vater pad. I remember Ronnie, Alan and their dad from years ago when I grew up in MA and had dealings with the company in jobs later on. Was sad to hear of Ronnie’s passing a little while ago, but I smile for him every time I see your “endorsement”. 🥰

  • @unicornbaits1622
    @unicornbaits1622 3 года назад

    Definitely love not having to learn about the corian type molds subparness on a griddle by trial myself. Very good thing to know. Definitely cnc ones for me. Great vid.

  • @Loochy808
    @Loochy808 3 года назад +1

    The denting on the doit molds can be solved by oiling. Rippers (what Chris is shooting here) and senkos are the worst offenders. shoot them slow, around 315* and oil them. I like vegetable oil spray to oil the molds (I just use cheapo walmart great value spray).

  • @ThePurposeFullLife
    @ThePurposeFullLife 3 года назад

    If you clear dip the lures from cast aluminum after injecting them, would that fix the rough finish issue and give a glossy smooth finish?

  • @fbisurveillancevan1635
    @fbisurveillancevan1635 3 года назад

    For the Corian/Stone molds, I use a simple silicone spray. It seems to work well.

  • @lakingz_80
    @lakingz_80 3 года назад

    Mr Jones.. Got a question...Total nube here to making baits .. Molds...Are stone molds one in the same with resin molds? Can't find anything that tells me different..

  • @bdooley8469
    @bdooley8469 3 года назад +1

    Yes, I’ve been waiting for this video. Good to know, I won’t be buying the stone. I wouldn’t mind seeing you try a stone mold with it coated with engine block paint. Side note, how do you prevent denting?

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      Usually injecting at a super low temperature and holding 10 seconds of pressure is the cure for most denting

    • @bdooley8469
      @bdooley8469 3 года назад

      @@WorldsWorstFishing ok, I’d been doing it at about the 375 mark in a cold mold. I’ll try letting it cool a little bit next time

  • @heatherlee7616
    @heatherlee7616 4 месяца назад

    You should try to stick a flat head screw driver in the little notch on the stone mold to pry it open

  • @garyboyd9704
    @garyboyd9704 3 года назад

    I use Do-It cast molds because I didn't want to buy a $150 mold if it's not something I was going to enjoy doing. From my very limited experience, the worms really aren't a noticeable difference from the cnc molded worms, but where you really notice the difference is in the swim baits and creature baits...

  • @pakofishing
    @pakofishing Год назад

    Hello ;) I see you've used mica powder, what is the other pigment that you used (the liquid black) ? :)

  • @kennethc5223
    @kennethc5223 3 года назад

    I used to have do it molds. Harder work to keep dents and bubbles out, cnc are easier. Great video.

  • @michaelgarcia4210
    @michaelgarcia4210 3 года назад

    I’ve been using and selling lures using the do-it 3 inch paddle tail mold. I have sends like crazy in the bodys of my baits. I was starting to think it was because of my temperature or error, but it’s great to see it’s not just me lol. Definitely going to invest in some new molds

  • @nealkrueger6009
    @nealkrueger6009 3 года назад

    I jus watched your clip on moulds . ive got a question on who makes cnc moulds and what does a maker typically need to make a mould. I am looking to geta mould to cast my own Mann's. Mosquito Hawk type. Bait, simce the havent been made in years. I got to locate a mold and make my own. I am not going to pay 40.00 for a pack of 12 (when you can findthem on EBay.. Thanks for the entertaining vids.

  • @michaelboettcher9384
    @michaelboettcher9384 3 года назад +1

    I use these rock molds all the time! Love them.spray a little pam on table then take a tooth brush dab pam and lightly put on oil with tooth brush every third pour! One swipe up and down with tooth brush and done! Easy peezy! Great molds!

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      I am glad they work for you..I didn't have much success haha

    • @MrCami2
      @MrCami2 3 года назад

      @@WorldsWorstFishing because there is a training curve to pay

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      @@MrCami2 well of course..

  • @davewesternky
    @davewesternky 3 года назад +1

    Been using the stone molds for years and all I do is keep a makeup brush in a jar of Vaseline and every other shot just brush a light coat and no problems.

  • @dakotak.6956
    @dakotak.6956 3 года назад +1

    could you heat finish/polish the do it swimbaits? Just an idea idk if it would work

  • @hawkins3888
    @hawkins3888 3 года назад

    good video for those trying to decide which molds types to get would like to see a video on curly tail crappie grubs with tails one color and body another keep up the good work on videos very informative

  • @pondbossbaits4579
    @pondbossbaits4579 3 года назад

    Been using stone molds for years. Brush Vaseline every 2-3 injections and it works great. Cast molds look great too if you brush Vaseline on as well every few injections.

  • @spunkmeyerk6660
    @spunkmeyerk6660 3 года назад

    Could you polish the cast mold to get a nicer finish?

  • @yaboiyabby
    @yaboiyabby 3 года назад

    Could you make a dark greenish blue senko with small purple and small lime flake?

  • @marctheriault
    @marctheriault 3 года назад

    Just sitting down to watch this, didn’t realize you were looking for something to do ta-day! 😂
    Never mind... just checked your weather... I wouldn’t have planned a fishing trip either. 😎

  • @collinsworlddiscovery7639
    @collinsworlddiscovery7639 Год назад

    What mold is better a benteto bug or a senko mold?

  • @str8dappin
    @str8dappin 3 года назад

    Awesome video! Great content. Now you have to test the baits side by side at the lake. Some tips from my experience with stone molds: These molds as with many things have a break in period. They work much better over time. Oil is a no go for the same reasons you described in the video. Waiting too long to remove the baits causes me sticking difficulty. If you remove the baits while the mold still has a little heat in it makes it come out much nicer. Just like cookies on a baking sheet, they are more difficult to unstick while cold. Firmer blends of plastic also perform much better than softer blends.

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      Good points about the break in

    • @MrCami2
      @MrCami2 3 года назад +1

      Try to use a brush for oil. PAM works better.

    • @str8dappin
      @str8dappin 3 года назад

      @@MrCami2 I haven't tried that yet so it's definitely worth a shot. I kinda am thinking though that it will still have the same problem just slightly better. I think adding anything that will add volume of a liquid will continue to be a problem. Unless it can be forced out the vents.

  • @diggerwest5219
    @diggerwest5219 3 года назад

    I have 5 inch stick mold as long as i oil it shoots great not like my cnc molds but they work

  • @owinkorf9747
    @owinkorf9747 3 года назад

    Im a beginner. What are the best but affordable cnc mold brands?

  • @johnnorris1227
    @johnnorris1227 2 года назад

    Not sure how fair of a comparison that is. It looks like there is still plastic stuck in that tail on the stone mold from the first run.

  • @trent5327
    @trent5327 3 года назад

    I make senkos in a do-it aluminum mold using regrinds, they ain't pretty but the bass don't care. I spent less than $100 to get everything I needed, including the plastic, molds, and injector. I've weighed in big bass on those senkos twice, and placed in the top 5 on em many times. And I've saved hundreds by not buying Yamamoto senkos, and I've proven my getto senkos to outfish em multiple times anyway. I understand buying a $400 CNC mold if you intend to sell baits because consumers want something that looks shiny, but there is no need to spend a ton on stuff if you're making lures for personal use. Just my 2 cents worth

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      Oh yeah that mold absolutely produces a good bait..and the good part is you can customize your barometer and colors however you see fit 👌

  • @keeperofthegood
    @keeperofthegood 3 года назад

    Chris, I am surprised that you didn't go that extra step :) dip those rough baits in a clear with something that plays well with textures like a little bit of hypershift or pearl power added. Good demonstration over all. The other n00b item I have been looking at are injectors. There seem to be a wide range of them from DIY copper pipe rigs, to glass syringes, teflon ones and a range of aluminum ones. Including multi injectors that mix sizes (25/75 volume difference for example). And in terms of volume from 40cc and on up.

    • @marctheriault
      @marctheriault 3 года назад +1

      I've been going through a bunch of Chris' DIY vids and his first choice for injectors seems to be Bass Tackle. www.basstackle.com/category_s/78.htm.
      Still doing hand pour for now, but that's my plan if I make a jump to injection.

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      @@marctheriault definitely bass tackle!

  • @i2aspire
    @i2aspire 3 года назад

    Glad I ordered 2 more Angling A.I molds than the cheaper ones, thanks for sharing

  • @darrenhall7990
    @darrenhall7990 3 года назад

    I know this is an older video. I do have a special place in my heart for the blue silicone molds. I have better luck pouring a 3 pour worm. I can get the heat just right to split the bloodline on the middle layer. It looks beautiful. Especially with a top smoked color with a split gold dust bloodline, and the bottom smoke. I like how you can add volume to the worm, height wise, without an actual over pour. I've bought 1 piece CNC flats, I can't get those results. I also bought a couple injection molds, they are en route from BTS and and AI. Now I can't find the GOOD injectors with the locking cap. I need a triple with a triple and a double block. I guess pouring flats for the last 25 years has me stuck in my ways. Just need the injectors to start this journey and get with the times.

  • @kevinclingaman6277
    @kevinclingaman6277 3 года назад

    Chris, Can you explain the heating up of the molds? Seems I’ve seen the molds on a griddle/hot plate type item, but what is the purpose, etc.
    Thanks.

  • @alexandrest-onge7381
    @alexandrest-onge7381 2 года назад

    Hey, someone know where i can find MULTI cavites Albies Snaxx mold and Slug-go one ?
    Freaking molds are hard to find ! Same with Jig Head molds... always multi cavities with differents weights. I'm looking for good production mold
    thanks in advance !

  • @howardchapman800
    @howardchapman800 Год назад

    Do you know of a company that makes custom aluminum or C&C molds?

  • @paulsarris9638
    @paulsarris9638 3 года назад

    hey chris . great channel you have here . i have a question about denting . i use a cnc mold and i get to much denting for my liking . was wondering if there is a way to fix this issue ?

  • @Flarexxxx
    @Flarexxxx 3 года назад +1

    Only one beer left!?!? Rookie numbers man XD same reason i always keep 2 bottles of rum, not a heavy drinker but when i want a couple man i dont want to have just one
    Edit: remember don't get into watches
    Those that know
    Will know

  • @064pointbreak
    @064pointbreak Год назад

    Lesson learned for using a non-metal mold for the first time; not using lubricant

  • @bobsaget6720
    @bobsaget6720 3 года назад

    For the stone mold would a lubricant spray work better? Like a silicone one or even wd40? Maybe cooking spray too? Also loved the hammer portion of the video!

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      The website actually recommends greece, but I would imagine a spray lubricant would work well.. usually worm oil does the trick for these things

  • @tarponspringsfishingclub
    @tarponspringsfishingclub 11 месяцев назад

    Great video...Where do you purchase CNC molds? I want to make shad swim bait lures for salt waters Thank you.

  • @KG_85
    @KG_85 3 года назад

    Love all the great content, was wondering what camera you use for filming and if maybe you can do a video on your filming setup. Thanks for all the great content!

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад +1

      I use a mirrorless Canon EOS on a tripod.. my filming process is not really all that complicated and would not probably make a very good video

  • @daniellaw8999
    @daniellaw8999 3 года назад +1

    Don't oil a stone mould. Use a proper universal mould release spray and the lures will come out just fine.
    On both baitmold and bugmold they recommend lubricating the mold so why shoot it without lube? Seems pointless and destined to fail.
    It's like trying to drive your car without putting gas in it.
    CNC moulds are great, but for the hobbyist just making baits for themselves and maybe a friend or two, I'd go with stone everytime.
    I'd choose cnc if I wanted to produce big numbers of baits to sell.

  • @BIOSYNBAITS
    @BIOSYNBAITS 3 года назад

    Which CNC swimbait mold was that? Link if possible

  • @MrCami2
    @MrCami2 3 года назад

    Chris, I think that reading comments about stone molds, quite all of them describe good experience, isn't it? So, I think that you have to review your opinion about them. Sure, stone molds are not easy to inject, there is a training curve, but ONE thing has not been said till now: you can find quite all most famous soft baits replicated by stone molds. I personally started with silicon pouring mold, now I use my own two halves silicon injection ones, I bought an american 4 cavities alu CNC mold, it's great, I also use some sand casted german alu molds, but believe me: my best injected soft baits come from the cheaper stone molds ... they are machined by CNC, too. Bye Cami

  • @abrahamgbarberstation7445
    @abrahamgbarberstation7445 3 года назад

    where you can buy aluminum molds

  • @Forklunkerman
    @Forklunkerman 3 года назад

    where do you get your molds?

  • @jaimecorona9948
    @jaimecorona9948 2 года назад

    Brother, I need information about making a mold, can you help me?

  • @MrShawnmg
    @MrShawnmg 3 года назад

    Thank you! Was waiting for this one!!!

  • @claudeharridge5413
    @claudeharridge5413 3 года назад

    -
    Thanks for the review, I have ordered and received 5 of the stone molds, I have all the parts now to start pouring / injecting. We will see what happens... not real encouraged about them now...

  • @crazycofalcon
    @crazycofalcon 3 года назад

    What about silicone molds for hand poured baits - go do they rate?

  • @time9667
    @time9667 3 года назад

    Like your video thanks for showing me I got a stone and a 10 in worm molds from do it mold

  • @glitchmac5488
    @glitchmac5488 3 года назад +1

    I am new to bait making and I have a few stone molds but they are from “Best_nj” and I love them you should really try them out for another comparison video!! They work great for me! I have multiple swim bait ones and a few frogs and flipping bugs! Anyways love the videos bro!!!!!!!

    • @glitchmac5488
      @glitchmac5488 3 года назад +1

      No oil or nothing needed just take em out of the package and shot some baits

    • @glitchmac5488
      @glitchmac5488 3 года назад +1

      Looks kinda like the Do-it mold in this video (the swim bait I like)

  • @kramnackman9562
    @kramnackman9562 3 года назад

    I Will agree they suck out of the Box but to get even heating on the do it molds I belt sanded the back of them and I used my dremmel tool with a light compound and polished the inside so they came out smoother I oil everything between runs with Golden grub oil with a little paint brush . I also have 2 angling AI C &c molds And one with no name I got it at a flea market So I got a little bit of everything and I love to tinker with it ...PS love your channel And I live a couple miles away from where They make your beloved Yuengling beer😁👍🍺

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      Lol love the yuengling..it's not German bier..but it's good!

  • @michaelboettcher9384
    @michaelboettcher9384 3 года назад +2

    I have poured thousands of tails out of a stone mold. No problems! I do lube with tooth brush every third time!

    • @WorldsWorstFishing
      @WorldsWorstFishing  3 года назад

      Glad they work well for you. The tail design on this Stone mold was definitely a tricky design that would even give trouble in CNC.. I imagine a simpler design in stone would yield good results when lubricated.

  • @coltonoller6581
    @coltonoller6581 3 года назад

    I have the same ripper molds lol🎣