Good on you Dom, well done. I am actually putting mine on the hard on Thursday. 25ft and 6 ton. Always makes me stress. Should be able to get her cleaned, anti fouled and back in, in two days.......Then, fishing. Cheers.......
Ripper Dom….. made the job look easy mate !! That winch needs some rust converter on it as well 😂 I have 50mm nylon webbing instead of rope on my winch .cheers 🐔 🍻 🐓
Looks bloody good Dom There used to be that joint in Morley called Clark rubber I wonder if they have anything that could go on those skids on the side thats a bit spongy……
Well done trailer fixer man ! Lol , Thankyou for the insight , I am just looking at my set up mmm I am going to get the jack out shortly and do a bit of adjustment of my own ! Cheers Geoff 👍😀
You’ve done an amazing job dom I’ll take all your advice in this video and rewatch it in the long term future when I eventually get myself a boat gotta love going out for a fish and the last step is to just kick back and crack open a can of bush chook smoke a cigar (if anyone chooses too like me) and enjoy the fish and squid flying into the boat hahaha gotta love life things like that going out fishing and going on adventures camping you name it plenty of things to do in nature nothing more beautiful
Good Job Dom, i woulda been shitting myself gettin the boat onto the tyres. Gettin it back on didnt seem too bad though. I've got some trailer work that needs to be done soon though so was good to see this whole process. Cheers mate.
Fantastic work mate. You actually made it look easy. My skids dont sit right under my hull because its slightly curved. I was told they dont need to be hard up against because all the weight should be on the keel. So im not sure if i should do it hard so it matches the curve of the hull or just have gaps between the skids and hull👌👍
Thanks alot mate. Thats right 70% should be in the keel, however no gaps in my oppinion..just raise them a fraction and see if the boat slightly tilts around corners when trailing 👍
Nice work Don, I have same issue with my boat trailer. I wonder if you be able to pass me the phone number of person who done work on your trailer, will be appreciated.
C'mon Dom its not rocket science , im giving you a comment because it helps your channel, but seriously man,this is pretty basic stuff and you are capable of way better content! No offense!
Good on you Dom, well done. I am actually putting mine on the hard on Thursday. 25ft and 6 ton. Always makes me stress. Should be able to get her cleaned, anti fouled and back in, in two days.......Then, fishing.
Cheers.......
Thanks alot John!..wow thats a big a boat..dont do what I did lol..goodluck mate👍
Ripper Dom….. made the job look easy mate !! That winch needs some rust converter on it as well 😂 I have 50mm nylon webbing instead of rope on my winch .cheers 🐔 🍻 🐓
Lol..was thinking the same!, cheers mate🐔👍🍻
Well done Dom….definitely a two can and bbq job right there.
Lol..thanks Mark🍻
Good to see that you have gotten off the L plates. Looked easier than you thought.
Cheers mate👍
nice Dom. These two videos are such great real world resources. You nailed it, thought through the process perfectly 👌
Thanks alot Richard!
Great video Dom 👍
I know that stress, did the same with my old fibreglass boat!
Good stuff John👍
Well done mate. Great stuff. 👍🍻
Cheers mate👍🍻
Hey Dom, as a fellow Italian l appreciate the fishing and really dig the cooking, can't have enough Chilli!👍
Grazie Leo🍻
Professional Dom. Ready too catch some fish tucker soon hopefully don't forget to service the donk 👍🍺
Thanks mate..got it serviced just after this mate👍
Looks bloody good Dom
There used to be that joint in Morley called Clark rubber I wonder if they have anything that could go on those skids on the side thats a bit spongy……
Cheers Wholls, it had to be adjusted higher to make it sit tight👍
Well done trailer fixer man ! Lol , Thankyou for the insight , I am just looking at my set up mmm I am going to get the jack out shortly and do a bit of adjustment of my own ! Cheers Geoff 👍😀
Haha..cheers Geoff! Goodluck with it👍👍
Ok all done. Good job! Now let's go fishing!!! 🦈🦈🐟🐟🦑🦑🦀🦀
Lol..yes!!👍
You’ve done an amazing job dom I’ll take all your advice in this video and rewatch it in the long term future when I eventually get myself a boat gotta love going out for a fish and the last step is to just kick back and crack open a can of bush chook smoke a cigar (if anyone chooses too like me) and enjoy the fish and squid flying into the boat hahaha gotta love life things like that going out fishing and going on adventures camping you name it plenty of things to do in nature nothing more beautiful
Well said mate! Thanks very much👍
Good work mate.
Thanks mate👍
Nice job Dom. Young fella is a good lookin rooster. Cheers mate👍
Thanks mate, hes my nephew👍
Great video Dom, Your disc brakes are excellent. I've only ever seen the disc brakes on bigger trailers. I may have to do the same to my trailer. 🤟🎏🚤
Thanks Brad! The previous owner put them on..your right they are for the bigger boats althougj handy👍
Nice job Dom well done, did mine recently but I needed a spare person and a rattle gun to free up the bolts and align everything 😜
Good going Neil, thanks👍
Well do Dom .👌👌👍👍
Thanks alot Kim!
Good Job Dom, i woulda been shitting myself gettin the boat onto the tyres. Gettin it back on didnt seem too bad though. I've got some trailer work that needs to be done soon though so was good to see this whole process. Cheers mate.
I was mate taking it off was stressful..easy to put back on, glad you learnt something, goodluck 👍
Can’t believe you went for the VB you should have gone with the EMU BITTER good job on the trailer 👍👍👍👍
Lol..havent had that for years🍻👍
Thanks for the videos this helps me alot
You're welcome!
Well done Dom, usually a 6 man job and a slab or 2. 😆 🤣 😂 plus bbq
Lol..cheers Deb😁👍
😆😆😆😆😆
🤘🤘🤘🤘🤘
Hi Dom trailer looks like new you need to lubricate your winch it's squeezing omg good luck mate
Lol..yeah will do that, cheere mate👍
Fantastic work mate. You actually made it look easy. My skids dont sit right under my hull because its slightly curved. I was told they dont need to be hard up against because all the weight should be on the keel. So im not sure if i should do it hard so it matches the curve of the hull or just have gaps between the skids and hull👌👍
Thanks alot mate. Thats right 70% should be in the keel, however no gaps in my oppinion..just raise them a fraction and see if the boat slightly tilts around corners when trailing 👍
Like a BOSS!!!
🤘🤘🤘🤘🤘
Cheers Joey 👍👍
Finally I can get my wheels back!!!!
Cooking chevapi 😂
Lol..good tucker👍
U said purely for documentary purposes only. But missing the bush chook lol
Lol..Thanks alot mate 🐔🍻
Nice work Don, I have same issue with my boat trailer. I wonder if you be able to pass me the phone number of person who done work on your trailer, will be appreciated.
Thanks mate! Google John Papa's Trailers Osborne Park, also I had a brief shot of the blokes business name on this vid, hope it works out for mate
@@FishTuckerMan Thanks mate ,meaby I missed as I watched, 😄 watch again. Good luck mate and thanks.
C'mon Dom its not rocket science , im giving you a comment because it helps your channel, but seriously man,this is pretty basic stuff and you are capable of way better content! No offense!
Its all part of my journey..and had to share my first attempt of this. Cheers Dean, non taken👍