You're only the 2nd person to notice and comment on the link. LOL Glad you enjoyed it. Hope you subscribe and join the Smarthome Riggs community. Thanks for leaving a comment.
Thank you for the positive feedback. Glad you enjoyed it. We have a lot of fun trying to help demystify smart home tech for others. Thanks for taking the time to leave us a comment.
If the power goes out or the wifi is down would i be about to see the history videos or still access the Previous videos in the cloud or i would have to wait until the camera is back online
If the power goes out the camera will stop recording and stop uploading to the cloud (except for the outdoor cameras with internal batteries or solar panels, those will still record to their internal Micro SD cards but could not upload to the cloud with no WiFi) If you pay for the Cam Plus you can still see the history that was uploaded prior to the power outage from a PC in a different location (one with power and WiFi) Once the power and WiFi are back up the camera will pick back up from there and you'll be able to access the history on the installed Micro SD card again. I hope this answers your questions and thank you for supporting the channel.
The camera should be able to put up with Florida's direct sunlight just fine. We have 1 of these V3 Pan cameras setup at a house in Texas and it has been in Texas direct sunlight for over a year with no issues. I would mention that at times when the direct sunlight is in the field of vision there will be a solar flare in the footage that appears as a white spot, but it is only at times that the sun is directly pointing at the lens and this is the same for other cameras as well. I hope this answers your question and thank you for supporting the channel.
Yes it can, The V3 included with the Floodlight can not be replaced with the V3 Pro because of voltage from the integrated plug, but the additional USB on the back can be used to power the V3 pro or the V3 pan. I hope this answers your question and thanks for supporting the channel.
I got a magnet from harbor freight 65 lbs pull magnet drilled the center hole just a tad bigger Used the supplied screw with the Wyze pan V3 and pulled down my old Wyze V3 leaving the metal disk with 3M backing and just put the pan V3 in its place . works great
Way to think outside the box!!! That's AWESOME!!! I used the Magnetic Mount the Pan v1/v2 offered. It has a disk that screws into the bottom, (it's a tab bigger, but works perfect). The hinge also allows you to adjust the angle just right. It even comes with a 15-ft flat white micro USB cable, that you can use for the regular v3 (or the new OG). It's only $8 from Wyze when they get it back in stock, (or currently on eBay for a little more). But a Harbor Freight magnet... That is genius... Thanks for leaving a comment and sharing this Wyze Cam Pan v3 hack with our Smarthome Riggs community.
that is correct. blue indicates it is on and red means it is recording. You can also turn the led status light off in the settings of the camera (like I do) then it shows no light at all in either state. With the led status off it also doesn't attract bugs at night.
I would try resetting the firmware in the device using a 4GB or 8GB MicroSD card to see if you can restore functionality. I hope this helps. Thanks for supporting the channel.
@@waynehavens9932 really? I wonder what's going on with mine. Maybe it's because I'm going from usb a to mini then mini back to usb a? Something is causing both to not work though. I'd like to figure it out. I like the cameras.
Just make sure your USB extension cable is a male to female, (Amazon has a 2-pack of 13-ft flat whites ones for $12 - amzn.to/3XHUW4x ). I hope this helps. And thanks for taking the time to leave us a comment.
Wyze said there are USB extensions for USB1 that only handle 5v/1a power, USB2 or USB3 should be able to handle 5v/2a or 5v/2.5a. So if you have a newer one it should be fine. I only linked the one on Amazon because it's flat and white, so it matches great. Thanks for all the community member helping each other out. I love it when we all work together to help each other.
That QR code!!!! No way! 😂🎉
I’ve used it in a couple of videos. I love it. Lol. You’re the first to comment on it. 😂🤣👍
Oh now that's cool. Live koi pond with tracking? Great idea! @4:03
You're only the 2nd person to notice and comment on the link. LOL
Glad you enjoyed it. Hope you subscribe and join the Smarthome Riggs community. Thanks for leaving a comment.
Never!
Gonna...
I like your format with multiple people as that keeps it interesting with variety and humor. Good work
Thank you for the positive feedback. Glad you enjoyed it. We have a lot of fun trying to help demystify smart home tech for others. Thanks for taking the time to leave us a comment.
If the power goes out or the wifi is down would i be about to see the history videos or still access the Previous videos in the cloud or i would have to wait until the camera is back online
If the power goes out the camera will stop recording and stop uploading to the cloud (except for the outdoor cameras with internal batteries or solar panels, those will still record to their internal Micro SD cards but could not upload to the cloud with no WiFi) If you pay for the Cam Plus you can still see the history that was uploaded prior to the power outage from a PC in a different location (one with power and WiFi) Once the power and WiFi are back up the camera will pick back up from there and you'll be able to access the history on the installed Micro SD card again. I hope this answers your questions and thank you for supporting the channel.
Can that wyze (waterproof cam) (operate) in direct sunlight in Florida.?
Florida sun has been known to melt some plastics.
The camera should be able to put up with Florida's direct sunlight just fine. We have 1 of these V3 Pan cameras setup at a house in Texas and it has been in Texas direct sunlight for over a year with no issues. I would mention that at times when the direct sunlight is in the field of vision there will be a solar flare in the footage that appears as a white spot, but it is only at times that the sun is directly pointing at the lens and this is the same for other cameras as well. I hope this answers your question and thank you for supporting the channel.
Very good review! thanks!
Thanks for watching and Thanks for supporting the channel.
Can this Pan V3 be the add on camera to Wyler floodlight?
Yes it can, The V3 included with the Floodlight can not be replaced with the V3 Pro because of voltage from the integrated plug, but the additional USB on the back can be used to power the V3 pro or the V3 pan. I hope this answers your question and thanks for supporting the channel.
I got a magnet from harbor freight
65 lbs pull magnet drilled the center hole just a tad bigger
Used the supplied screw with the Wyze pan V3 and pulled down my old Wyze V3 leaving the metal disk with 3M backing and just put the pan V3 in its place .
works great
Way to think outside the box!!! That's AWESOME!!!
I used the Magnetic Mount the Pan v1/v2 offered. It has a disk that screws into the bottom, (it's a tab bigger, but works perfect). The hinge also allows you to adjust the angle just right. It even comes with a 15-ft flat white micro USB cable, that you can use for the regular v3 (or the new OG). It's only $8 from Wyze when they get it back in stock, (or currently on eBay for a little more).
But a Harbor Freight magnet... That is genius...
Thanks for leaving a comment and sharing this Wyze Cam Pan v3 hack with our Smarthome Riggs community.
The front blue light doesn't indicate that the camera is recording, it just indicates that the camera is on. Other than that, great review!
Thank you for the info and the comment.
@@SmarthomeRiggs I believe it changes from blue to red, if it's recording.
that is correct. blue indicates it is on and red means it is recording. You can also turn the led status light off in the settings of the camera (like I do) then it shows no light at all in either state. With the led status off it also doesn't attract bugs at night.
Mine won't recognize Wi-Fi
I would try resetting the firmware in the device using a 4GB or 8GB MicroSD card to see if you can restore functionality. I hope this helps. Thanks for supporting the channel.
FYI, don’t try to use any kind of usb extension cable with them. They won’t work.
I have mine hooked up to a 15ft USB extension and it works great.
@@waynehavens9932 really? I wonder what's going on with mine. Maybe it's because I'm going from usb a to mini then mini back to usb a? Something is causing both to not work though. I'd like to figure it out. I like the cameras.
Just make sure your USB extension cable is a male to female, (Amazon has a 2-pack of 13-ft flat whites ones for $12 - amzn.to/3XHUW4x ). I hope this helps. And thanks for taking the time to leave us a comment.
Mine works fine with my 10 foot usb extension
Wyze said there are USB extensions for USB1 that only handle 5v/1a power, USB2 or USB3 should be able to handle 5v/2a or 5v/2.5a. So if you have a newer one it should be fine. I only linked the one on Amazon because it's flat and white, so it matches great. Thanks for all the community member helping each other out. I love it when we all work together to help each other.
It is that camera
Software may be different, but there’s no mistaking that form factor, and fundamentally. Just sayin’... lol.
I know it's better for the 3pro
It a lot more functional being able to move and track. That’s for sure. Thanks for taking the time to leave us a comment.