Checking and Re-Plugging Bose SounDock Sound Processor Ribbon

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024
  • If you dock has power but does not make a sound then follow this procedure first - it may well solve the issue

Комментарии • 19

  • @aliulugun4045
    @aliulugun4045 3 года назад +1

    FYI, just fitted the bc 20 and everything works fine bar some terrible white noise .
    Reconnecting the ribbon cable to the amp has sorted the issue.
    Question however the ac adaptor makes a slight whine ! Is this normal ??
    Great bit of kit guys !
    Revived an old piece of tech !
    Thanks !!!
    I've just turned the ac adaptor on its side and the noise is greatly reduced
    Thanks again x

    • @ispens
      @ispens  3 года назад +2

      The early model 208 power supplies whined - sometimes a lot - this is a noise coming direct from the power adaptor housing via the air. The best bet is to get a new power supply or a newer version of the one you have. The early power supplies ending 201 did not whine. See the power supply diagnostics video on this channel - the issues are explained.

  • @dfu1685
    @dfu1685 2 года назад

    MUCH APPRECIATED!!!
    Thank you so much 👍🏼

  • @Vince-hl1tl
    @Vince-hl1tl 2 года назад

    Very clear instructions.

  • @Clarkstonlife
    @Clarkstonlife 9 месяцев назад

    Hi my sounddock series ii has power and the green light stays on. No sound and volumr buttons do nothing. I took it apart and all cables are attached. I'm thinking one of the ribbon cables is bad. Is it usually the cable from 30 pin to sound processor or the middle cable from processor to amplifier?

  • @TheSoundtastic
    @TheSoundtastic Год назад

    Hey there,
    I have exactly the issue, that you mention at 26:23 (Problem with the sound processor). Can you send the link for the video you mention there?
    Best,
    Jonathan

  • @kevingoris
    @kevingoris 2 года назад

    Looks like my Sound Procesor need to be fixed, but wanted to upgrade to the new bluetooth adaptar.
    Does it fix it buying that or i need two parts? (the fixed sound procesor + the bluetooth)????

  • @arthurrodrigues3212
    @arthurrodrigues3212 10 месяцев назад

    How do I get my hands on the bluetooth and aux adapter for my sounddock

  • @flasheart3817
    @flasheart3817 2 года назад

    Hi sometimes my Bose sound dock type 1 stop charging and playing but when touch the outside of the metal on my classic iPod I can still feel a vibration running through. Do you have any idea what it might be please?

  • @petersolayman9852
    @petersolayman9852 2 года назад

    I have problems with same model I found Ic not working but I can’t found new one
    The ic number. Ior p833
    Where I can found
    Thank you

  • @toks7492
    @toks7492 2 года назад

    where can i buy this sound processor ribbon?

  • @jean-louisvitry7969
    @jean-louisvitry7969 3 года назад

    Hello, could you tell me the name of this dock adaptation ? I like to by the same model for my Bose SoundDock V1

    • @ispens
      @ispens  3 года назад +1

      the BC20 from invebo

  • @hammerinexile
    @hammerinexile 4 года назад

    Hi, my ribbon cable has completely detached from the amplifier...I presume I need to buy a replacement?

    • @hammerinexile
      @hammerinexile 4 года назад

      Sorry, by that I mean that it hasn’t just come out of the connector...the connector has snapped off of the amplifier completely

    • @dmcbohol
      @dmcbohol 4 года назад

      @@hammerinexile
      Which side of the connector did it come out?
      The Processor side or the Power Amplifier board side?

    • @ispens
      @ispens  3 года назад +1

      usually the plug comes de-soldered - they were never fixed on that well. We can solder the cable back on for you.

  • @rendezvous284
    @rendezvous284 3 года назад

    Hi. Where to buy power supply for series 1 power supply?

    • @ispens
      @ispens  3 года назад +1

      www.invebo.com