KEL TEC SUB 2000 Aluminum Trigger Guard | KEL TEC SUB 2000 Accessories | KEL TEC SUB 2000 Mods
HTML-код
- Опубликовано: 8 сен 2024
- GET THE KEL-TEC SUB-2000 ALUMINUM TRIGGER GURAD HERE: www.mcarbo.com...
*Ultimate KEL-TEC SUB-2000 Aluminum Trigger Guard
*Machined 6061 Aluminum Trigger Guard
*Tumbled Smooth & Hard Platted with Black Anodizing for Superior Strength
*Corrects Factory SUB 2000 Trigger Guard Problems
*Trigger Guard Upgrade provides a wider level shooting base
*Extremely durable trigger guard for use as lever to fold barrel assembly
*Tighter tolerances than factory trigger guard to prevent wobble
*Functions in both the Gen 1 & Gen 2 models of the SUB-2000
*Protected by the MCARBO 100% Lifetime Guarantee
*Made in the USA
*Fast Same Day Shipping!
Custom Designed & Manufactured by MCARBO
Put a real trigger guard on your KEL-TEC SUB-2000 that won't flex or warp when folding the barrel assembly in half. The MCARBO Machined Aluminum Trigger Guard was designed to put you in more control of your SUB-2000. The major advantage in having the KEL TEC SUB-2000 Aluminum Trigger Guard is that it won’t flex or break like the plastic trigger guard. That flimsy plastic trigger guard will eventually break when it's most needed to perform in a real world situation.
Another advantage is the wider smooth base of the trigger guard that makes it a much better platform to use when shooting from a supported position. With the removal of the hump in the middle from the plastic trigger guard, this improved Aluminum Trigger Guard provides a smooth level surface to help support your shooting position with. It's also wider and much easier to grab to deploy the lever in order to quickly fold the barrel assembly in seconds.
The Aluminum Trigger Guard has been machined to tighter tolerances so that it won't wobble or move from side to side like the plastic guard. These common KEL-TEC SUB-2000 Trigger Guard Problems can be resolved with the new Machined Aluminum KEL-TEC SUB-2000 Trigger Guard from MCARBO. The KEL-TEC SUB-2000 Trigger Guard by MCARBO is CNC milled out of a block of 6061 aircraft grade aluminum, then tumbled and chamfered to remove sharp corners and finally hard platted with black anodizing to give it superior strength and a premium lifetime finish. This is the Ultimate Machined Aluminum Trigger Guard for your SUB-2000 that will out last and out perform the factory plastic trigger guard. T
his is one of the best improvements you can make to your KEL-TEC SUB-2000 aside from the KEL-TEC SUB-2000 Trigger Spring Kit which will reduce your trigger pull from 7.5 lbs to a modified 5.25 lbs and the KEL-TEC SUB-2000 Target Trigger to get rid of the trigger flex.
The Target Trigger and Aluminum Trigger Guard are a matching pair that are machined together and anodized at the same time for a matching premium finish. Get all three to install at the same time to save yourself the time of opening up your SUB-2000 again after you realize the plastic trigger guard is not the ideal solution for a lifetime of use. The KEL-TEC SUB-2000 Aluminum Trigger Guard Upgrade will fit both the Gen 1 and Gen 2 models. MCARBO had the shooter in mind when we designed the KEL-TEC SUB 2000 Aftermarket Aluminum Trigger Guard to correct all of the factory trigger guard problems. Don’t’ wait any longer to upgrade your trigger guard with much needed aftermarket performance.
Finally! FINALLY!!!! A video showing a full, in depth, step-by-step, disassembly and reassembly, with lots of close ups!!!!! Why couldn't I find this video before I watched every other shitty guide on RUclips on this topic??? 5 hours of hair-ripping frustration is finally over! THANK YOU!!!!
I didn't even get halfway through the video and I was like, "Shut up and take my money!" Great upgrades, thank you for the instruction!
Haha! Thanks Brother that's Awesome. I'm glad you like them that much.
Chris and the MCARBO team are by far the best aftermarket company for Kel Tec. Their support for the sub2k is astounding. Trigger and trigger spring job, single point sling mount, aluminum trigger guard, charging handles, the list goes on. Their upgrades + midwest industries optic mount make the Sub2k the premier pistol caliber carbine, hands down.
Thanks Brother, we appreciate your support! We've got plenty more on the way for the SUB-2000. Our Universal Optics Mount will be released later this month. I'm looking forward to hearing your feedback on it. Thanks again,
Chris
MCARBO Sounds interesting! Are you guys going to do a rear sight upgrade anytime soon?
Yes Sir! We plan on having two different options for the stock height rear sight available soon. The notch sight similar to what you would have on a pistol and the peep sight similar to what is there now but in aluminum and the ability to flip it up and down. We have more planned for the iron sights but this will be the starting point.
NICE " GLOCK " CARBINE
Just ordered one of these. Thanks for putting this on the market. Excellent.
Thanks Brother we appreciate your Support!
I fired my sub for the first time and all I could think about on the way home is I wonder what MCARBO has for the trigger? Well, you have it all! Thanks!
MCARBO, have you ever thought about contacting Nutnfancy, Hank Strange and Mac from the Military Arms Channel to have them do a comparison of the Sub 2000 Gen 2 before and after the installation of your parts. I think that would be great to see.
Yes I agree! We've sent emails and parts but still nothing. I'm not sure how they operate but would really like to get them to review our products. Maybe we need to try a different approach. Let me know if you have an idea? Anybody that personally knows these guys, it would be a big help to get a friendly introduction. Thanks for your Support!
MCARBO Maybe try contacting Chad Ennius who's a representative for Kel-Tec & see if he can get Nutnfancy or Hank Strange to do a comparison video. I'm on Hanks Strange Facebook page so I'll throw it at him & see what he saids. Merry Christmas
Thanks Brother! We appreciate your support. Send me an email with Chad Ennius's contact info if you have it. I do have a contact on the inside at KEL TEC. We hooked up the KEL TEC Shooting Team with 12 Trigger Spring Kits 8 months ago and we're still in contact. I'm planning on taking a visit to KEL TEC one day soon since they are only 3 hours away. I'll see if they will let me make a video of the trip! Happy New Year!
MCARBO I don't have Chads contact info but I believe he's a member of the KelTec Shooting Team. I did chat with Hank Strange & he said he'll look for you guys at shot show. Good luck man the word needs to get out about how great those MCARBO upgrades are!
The sub is about weight also, i think it would be better if you skeletonize it.
Love your videos. Makes me feel confident in purchasing your products. Aluminum mag release has got to be next.
Thanks for the support! We appreciate the feedback. I think an Aluminum Mag Release is getting traction. If the demand is there we will make one. The only problem with the mag release is that there are a variety of factory pistol magazines from Glock, Smith & Wesson, Beretta and SIG that we would have to make special variations for each type. We're definitely up to the challenge if the demand is there. I'd bet the Glock mags would be first since they are the most popular. You tell me?
***** Thanks for the vote! I vote Glock mags too!!
am i allowed to vote for CZ75 mags? The CZ people would love you =^)
Mine is a Beretta M9/92f - which come to find, is actually not Beretta.
Branded: Mec-Gar...
and after a bit of foreplay with the S&W MP Shield, walked over to a gung hoe with a CZ-75. I'll be damned.
Same freaking mags. Then I wondered, well since the Sub2K also offers a Sig 226... Well SOB... Also Mec-Gar mags.
Yes, the release slots (in mag) will vary from model to model, the main variance is the location of the slot in position to length of insert (the slot differences are minor) which doesn't affect the mag release mech (position affixed to the polymer grip).
Synopsis: if you DO produce these, it would be two base models = one for the Glock & one for the other variants.
The Sig, S&W, Beretta (which compat CZ) would only need one machined part - which could then be narrowed by slightly shaving the catch for the discrepancies of other models.
Have a look at these mags side x side - you'll see what I'm blathering about.
Seems so easy yet somehow I’ll manage to mess this up 😂
Wow this is awesome. Will have to get one to try out. High quality parts and a excellent how to video.
Thanks Tim! I'm looking forward to hearing what you think about it. You should have received an email with a special offer for the Trigger Guard since your a Member. Thanks again.
Thanks MCARBO!
I'm actually looking for a narrower one so that pistol guard locks can more easily fit.
80% aluminium receiver!
I'd like to see a pair of gapless rings, like McFarland gas piston rings, for the safety as an nice upgrade to the c-clips.
Thanks for the idea, I'll see what we can do. We really need to do something better for the safety on the SUB. Let me know if you think of anything else.
Does the Aluminum wear on the plastic it connects to when folding and I unfolding
Great video thanks!
I'm still waiting for a left-handed Sub2k OR some kind of shell deflection attachment for stock Subbies to keep all the GSR from being blown back into your grille.
Just got my MCARBO trigger guard in the mail today and IT IS NOT WIDER than the stock trigger guard, it has a very minuscule difference in width. They must have redesigned these.... in that redesign they decided to put the “knobs” back into the trigger guard... it also seems thinner than the one shown in the video.
So is it worth it to buy this aluminum guard and have them install it or?
@@teacopem do it yourself not that bad at all to install. I wish I bought the curved trigger…. I’m thinking I wouldn’t have had to buy the trigger guard if I went with the curved one.
Edit: trigger is the best upgrade and worth it. I only bought the trigger guard because the upgraded mcarbo trigger STILL rubbed on the stock plastic trigger guard, so I only bought the mcarbo TG to get the function of the upgraded trigger (which was kind of sad to me)
great jOB!
I suggest yall make a clamp style castle nut cap and maybe a QD version with it too?? Great products and video!
Thanks Brother! We appreciate the ideas and support. I've added this one to our idea list.
I took the Gen 1 halves apart to clean it inside and investigate. I noticed the pin that holds the hammer and hammer spring was bent which wouldn't allow the hammer to cock back fully now...ahaaaa. Here in Canada we didn't(then) have the luxury to call Kel Tec for a new one or send it back to them(since opening the halves VOIDS the warrantee according to the distributor here in Canada)but I managed to straighten it out and cleaned it up and carefully put it all back together. I shot another 400 rounds better than ever until that pin broke.Telling the repair distributor costed me $150 to repair it BECAUSE I opened it up...
Is this the same in the US?
Everything I bought is awesome, but I lost the saftey spring lol
4:34 now let's begin field stripping
Next project: Machined aluminum mag release?
We're in the process of finishing up the Universal Optics Mount and then the Flat Trigger. We expect to have the Aluminum Extended Mag Release by Christmas! Send me an email and I'll send you updates as we get closer. chris@mcarbo.com
+MCARBO when's the flat trigger happening
Hey Brother we should have it out by the end of the year. I want to say Christmas. Sign up for behind the scenes access to what we're working on here: www.mcarbo.com/store/pg/114-Enlist-in-M-CARBO-Brotherhood.aspx
have you made a thinner one that a standard trigger lock will work?
Thanks for the question. We haven't made a thinner one yet. What did you have in mind or recommend?
Can I ship mine of to you and have you put mine together. I have too many parts and I really don’t feel 100% comfortable! I get the how will you ever learn but it‘s too many parts.
What do you think about a skeletonized version?
Look I would buy this setup and probably will ,however I am not ,repeat not , up to installing it ..so ..Is there a service to do this .some local gunsmith might be ham handed .
great videos btw!!! Subscribed
Thanks Brother!
wow, my '14 Gen 1 guard does not go side to side at all. is this a gen 2 issue? can't wait for the trigger to be back in stock
when are you going to make a aluminum buffer and locking mechanism for the folding portion?
Hi Donovan,
Thank you for you input! We've had a few requests for an improved buffer and it's definitely on our to do list. Anybody else want to see an improved Aluminum Buffer with T-handle locking mechanism to allow more positive control and faster deployment of the carbine? All ideas and input are welcome here. What would you be willing to pay for something like this? Do you like the T-handle idea or do you have something else in mind?
MCARBO I'll pay for anything that makes this sub2o00 better, I will upgrade the crap out of it as long as you're making them believe me they'll sell themselves...
MCARBO btw, I'm about to get all the upgrades you have on the website you've listed in the description..thanks
Good idea. Especially if the buffer came with a neoprene or rubber recoil sissyfication disc.
$25 to $50 is reasonable.
Will you install and return to me if I purchase trigger and trigger guard?
When is the new red dot sight with mount coming out?
If you're looking for more ideas, I'm not a fan of the cheap plastic rear sight, anyway you could create a machine steel or aluminum version? Also, cylindrical knurled charging handle would be a huge improvement, as well as a more positive metal mag release.
Awesome products by the way!
Thanks Kyle! We appreciate the ideas and feedback. We're in the process of creating a front and rear sight that will have a .300" higher line of sight over the factory sights. They will be machined aluminum and will both flip up and down. I like the charging handle idea and aluminum mag release. There's a very good chance we will do both of those if the demand is there. Thanks again.
The demand IS there!
Thanks Shawn, I appreciate your vote! If we can get more interest I'll get them both going ASAP.
Thanks, for the consideration. Gotta love a company that listens to its consumers. Keep up the good work guys! I'm going to be buying one of these carbines for myself soon. I had a chance to hand friend's, and I liked other than the flimsiness of some of the parts. You guys had solutions to all my concerns, and essentially sold me on it, so I will definitely be purchasing your products in the near future.
Thanks Kyle! We appreciate your support and willingness to help. It's great having fellow shooters input and really helps with the design process. I'm glad we're doing a great job so far creating much needed solutions together.
Thanks again,
Chris
Awesome! I just checked your MCarbo website and it was not listed. When is the release date?
Hi Jeremiah, we're doing an early release with a discount and free shipping offer. You can only find it with this link:
www.mcarbo.com/kel-tec-sub-2000-aluminum-trigger-guard.aspx
It will officially be available on the MCARBO website on Wednesday. Your welcome to pick one up now to get the special offer.
I always hated this Trigger Guard. Next month gonna buy all 3
Awesome! Thanks for your support.
make a new easyer to grasp locking tab that locks with more securly and easier to manipulate
Hi Terry,
Thanks for your idea. Are you talking about the latching tab on the buffer that locks the barrel in place after it's folded?
would y'all ever make an aluminum reciever
We would like to eventually make one but they will be expensive. KEL-TEC used to make the SUB-9 with an Aluminum receiver. They only made 3,500 of them then discontinued it all together. Then they started making the polymer SUB-2000. Would anyone else be interested in the aluminum receiver for their SUB-2000? What would you be willing to pay for it?
I'd be willing to pay for it I daily use my keltec favorite firearm I own and would love for it to have an aluminum receiver
+MCARBO how much would a receiver roughly run
+MCARBO I'd be willing to pay around 250 to 300
+MCARBO y'all could do a 1911 grip angle and have threads for the rear sleeve instead of locktight y'all could make it a bulletproof set up off of that but y'all might have to make it an 80% kit so no need for an ffl you know what I mean? we can finish it off of a drill press
You don't know how to remove the pin that's holds the butt stock
Do you offer install service by any chance? For the trigger, spring kit and lever?
Hi Jamie,
Unfortunately we don't offer one. Give your local Gun Smith a call and ask him if he can perform the install. Most of them can and at an affordable price. Let me know if you have any trouble finding anyone locally.
Okay I know your the president.no one I. Your company would say this but I feel compelled to. And you seem like a great guy and il continue to buy parts from you for my sub 2000. BUT FOR CRYING OUT LOUD! this is supposed to be an install video. I already and so have most people bought the friggn part. You did the First Almost 5 minutes with the sales pitch. Save that for another video. Like a description video. And near the end here we go again. Please stick to a video that’s truly a install video. I wish I was a better word smith because I certainly don’t want to come across as some know it all. I’m not that’s why I’m watching the video. But hey 27 and a half minutes for this video is ridiculous. Also from a Vietnam veteran to another brother. Thank you for your service.
Damm thats too much work to swap out thats a huge pass
Check out what James at TFB TV said about the M*CARBO Target Trigger and Spring Kit for the SUB-2000!
ruclips.net/video/js6xBGR1RWQ/видео.html