KEL TEC SUB 2000 Accessories | KEL TEC SUB 2000 Trigger Job | KEL TEC SUB-2000 Trigger Spring Kit
HTML-код
- Опубликовано: 31 мар 2016
- KEL TEC SUB 2000 Accessories | KEL TEC SUB 2000 Trigger Job | KEL TEC SUB-2000 Trigger Spring Kit by MCARBO
Buy the KEL-TEC SUB-2000 Trigger Spring Kit at:
www.mcarbo.com/kel-tec-sub-200...
How to disassemble a KEL TEC SUB 2000 properly and do a KEL TEC SUB 2000 Trigger Job using the KEL TEC SUB 2000 Trigger Spring Kit by MCARBO. Reduce the KEL TEC SUB 2000 Trigger Pull Weight from 7.5 lbs to 5.25 lbs. Complete Disassembly of KEL TEC SUB 2000 then KEL-TEC SUB-2000 Trigger Adjustment and Reassembly of KEL TEC SUB 2000. This is the most in depth KEL TEC SUB 2000 disassembly on RUclips. Brand New KEL TEC SUB 2000 Accessories RUclips. Watch the full Assembly of KEL TEC SUB 2000 Video by MCARBO.
MCARBO makes all sorts of KEL TEC SUB 2000 Gen 2 Accessories and more are coming out each month. Check www.mcarbo.com for more KEL TEC SUB 2000 Mods that you won’t find anywhere else. MCARBO is a Veteran Owned & Operated Gun Parts Manufacturer that specializes in KEL TEC SUB 2000 Upgrades and KEL TEC SUB 2000 Gen 2 Mods for your KEL TEC SUB 2000. Support MCARBO to Support the Troops! www.mcarbo.com/store/pg/7-Abo...
I love the quick edit at 18:20 where you forgot to put the trigger guard release spring in the right orientation and then suddenly it's fine... lol.
Thats huge to fuck up on a instructional video
I bought the whole kit for mine... trigger, trigger guard, spring, the new extended mag release, and screws. Do it all at once since you are taking it apart. You won't be sorry. All the pieces are top notch and fit perfect. Oh and watch that darn safety spring and pin, it will pop across the room on you in a heartbeat.
Thanks Brother for your Support! I'm going to mention the safety spring in the next video.
Thank you for this video, after my sear spring (which I didn’t know what it was at the time) shot across the room I decided to look for a video, wouldn’t have been able to reassemble without this!
Excellent video instructions. This trigger, spring kit and screws rock!
This is a MUST upgrade for the sub 2000. Thanks MCARBO or an excellent
product.
Thank you for your business and support! We greatly appreciate it. Let us know if you have any new ideas for the SUB-2000, we're always listening! Thanks again & Happy Shooting!
So you did a weapon check after pullin the trigger twice with the pull meter......nice.
So glad I found this video. Very informative and spot on. Watched another "expert's" video and, shall we say, their info was totally wrong.
Just received my kit today. Very good video!
Thanks so much for the awesome instruction! I got my mag release, trigger and trigger guard, and spring kit put in today. Very happy! I'm getting ready to go the range. Thank you MCARBO!
mcarbo... super legit I love your whole sub2k upgrades. every one of them is really fairly priced and high quality. thank you for your service sir in and out of the military.
Thanks Brother! We appreciate the support! I'm happy to have had the opportunity to serve our Great Country!
Discovered this carbine a little late in my firearms journey but absolutely love it and love your line of upgrades. Almost bought one of your pre-configured rifles but am glad I'm forcing myself to install all the parts. Really forces you to get to know the weapon in and out! Thanks for yiur service brother and keep up the excellent work!
I have a couple pointers that helped me.
1.) I rotated the trigger arm and spring to fit them instead of fighting the spring.
2.) Once I set the assembly, I hand-tightened the pins on the flat face (not ejection face) to "lock in" the setup due to the mag release making me take the handle back apart. Everything here was more than helpful, and we both achieved the same end. Thanks for the vid!
Great video, I used it to install new springs and while I had it torn down installed your trigger and gaurd. only thing missing is a replacement sight.
Thanks James for your Support! I'm glad you found the video helpful. I will likely make another one to show the installation of the Trigger, Trigger Spring Kit and the Trigger Guard all at once. Like this comment if you want another video showing that. I've also done a ton of these since I created this video in April! So it would likely be even better.
Take a look at our new Trouble Shooting Video for the KEL TEC SUB 2000 Gen 2: ruclips.net/video/-dNSznFnVVE/видео.html
Lol springs everywhere but hey thanks for the video really good and so is your products very impressive. I bought the whole set and the muzzle brake next will be the optic mount.
Great tutorial,thanks !!!
Excellent video thanks.
Nice video... Thinking about a keltec sub 2000
Thanks Brother! You can find them for $400 or less usually.
MCARBO yeah i just bought a Smith and Wesson mp so i got to get one with that pattern
Just ordered your spring, aluminum trigger and screw kits for my Keltec OD Gen 2 Sub2k. Your video was well done and fully detailed the procedure to help me come to the decision that I wanted to do this for my Sub2k.
Thank you for the feedback! We appreciate it.
The kits worked awesome and lowered my trigger pull weight from 7.5-8 pounds to 5-6 pounds. Perfect! The target trigger greatly improved the entire feel of the rifle and screw upgrade rounds out the mods professionally.
I found that a brass punch and 10 oz hammer is perfect for the 'castle nut' disassembly and install.
Thanks MCarbo!!!
Thank you for your business and support! I'm glad you got the results you were shooting for. Thank you for taking the time to leave your feedback and supporting us. We all really appreciate it. Happy Shooting!
Thanks for your feedback! I'm glad we did a good job on the video. It's motivating to hear that. Thanks again.
And thank you for the installation video it helped me a lot
Thanks Brother! We appreciate your Support!
Thank you I love the kel tec Guns but hate there cheap parts that come in them I live 20 minutes from the Kel tec factory in Florida thank you for making parts to switch them out with
We're all with you here Brother! Kel Tec makes great firearms but they have definitely cut corners with some very cheap parts that are critical to the function and performance. I'm glad we can do something to help! Thank you for your Support!
Thanks for the video. I understand the reduction in the pull (due to weaker replacement springs) But some people alledge that this kit also fixes the creep (the factory trigger has some nasty creep). If this claim is true, then how did you manage to implement this without changing the shape of the spring(s) - or have you changed the shape?
I'm so impressed I should pay you for your instructions 101 airborne special forces says thanks for your service
so far I've got the primary arms rotating red dot, the MCARBO t
rigger kit, the aluminum trigger cover & the sling mount, the charging handle cover.......the 30 round clips.....I don't even know wht else but it's all worth it, lol.....
btw, I also got the MCARBO screw upgrade kit......
Thanks Brother! We appreciate your support.
I just got the three upgrade kit in the mail along with the extended charging handle. I'll be installing it tomorrow. Great vids! I didn't see the 20% off code until after I purchased but after seeing you guys are vets and a small American owned business I'm more than happy to pay full price! You guys rock. I can't wait to see what you guys got coming for the sub2k. Trying to make mine into something I can really trust with quality parts that's why I bought mcarbo! I'd like to see a comparison vid between the older gen2 front sight and the newer one. Not sure which one I have but would like to see the difference. Also, any hints on what you guys are working on other than the trigger bar? Thanks again brothers!
Thx man, I've been having a lot of trouble getting the crossbar safety in on my gen 1. I get it to push through, always seem to go a little too far when I'm trying to put in the detent and it jams in place.....which requires me to remove one of the sides and try again. You make it look super easy, any advice?
going in tonight! wish me luck!
How did the installation go? What we're your results? Any feedback for us would be appreciated.
Thank you!
everything was pretty easy thanks to your install videos. until the shaving of the polymer frame for the trigger portion. the area that was recommended to shave did not work for mine. mine was actually a hump on the side wall near the point suggested by mcarbo. i legit had to disassemble/reassemble close to 10 times. it got to a point where i wasnt even reassembling the crossbolt safety because it was such a pain. i just held it in place sans c clips and retention pin. my new mcarbo trigger started out completely dead, then had a positive trigger pull with dead reset. then had a positive trigger pull with hanging reset and now its positive trigger pull with positive reset. went out and shot it on saturday and about 100 rounds went bang every time. will order from you again in the future!
Thanks Brother for your feedback. We just made a part 2 trouble shooting video to better demonstrate the solution. ruclips.net/video/QkIKeFk6sAM/видео.html Let me know what you think. Thanks
Check out what James at TFB TV said about the M*CARBO Target Trigger and Spring Kit for the SUB-2000!
ruclips.net/video/js6xBGR1RWQ/видео.html
also my trigger spring the short end fits flush everything is good to go but the lower end of the spring un aligns after inline after a few trigger pulls
Would be good to know hex bolt torque specs. The middle hex bolt ended up being too tight on mine and the trigger wouldn't reset (got stuck). Had to loosen it quite a bit before trigger would cycle again.
Excellent video. However, the camera is pretty far away from the actual installation of the small parts. The target trigger video has the camera close-up at the proper distance. I had to refer back and forth between the two videos to see an accurate illustration of the parts relationship during reassembly.
Thanks for the feedback. We will keep camera distance in mind for all future videos. We've noticed that more shooters have preferred the camera distance on the target trigger video. Thanks again.
After installing the spring kit, the pull is much better but on the reset it seems kinda weak is this to be expected?
I just installed the combo kit; spring kit, trigger, and guard. I also installed the screws and rubber grip. The videos were very good, but be careful with those receiver pins. I jimmied one up. I guess they're probably aluminum. Fortunately all parts are available from Kel Tec (if not the hardware store).
The MCARBO parts are a nice cost effective upgrade for the S2K. The trigger and guard are solid and the spring kit (plus trigger) improve the weight and feel of the pull significantly without sinking a lot of change into a budget gun. The SK2 is not worth sinking a lot of cash into IMO.
Oh, the other thing that happened is that as I was working on the gun a small metal piece showed up on my table from who knows where. It took me awhile to figure out what it was. On the top of the receiver is an upper feed ramp pinched in between the two haves of the receiver. It can fall out during disassembly. I assume the rounded end goes toward the butt in order to deflect the round down toward the barrel..
I was a little ambivalent about the spring/trigger upgrades at first. My trigger return was very weak and would stick sometimes. However, after working the action a number of times it is now working perfectly. Not sure what the hang up was but the action is now night and day improved.
We just created a trouble shooting video for this ruclips.net/video/-dNSznFnVVE/видео.html
Thanks Mark for your support and Feedback!
Check out the KEL TEC SUB 2000 Gen 2 Trouble Shooting video we just made ruclips.net/video/-dNSznFnVVE/видео.html
Just got my new springs and aluminum trigger in and come to found out the punch kit I ordered had the smallest size stolen out before it shipped. I tried to make do with the next biggest sizes and proceeded to scratch up my receiver while still having no idea how to remove the C-clip. Maybe I'll try again tomorrow
I figured it out, thanks anyway though
Any chance you will have the replacement trigger bar available before the end of the year? I ordered the complete trigger/spring/screw kit but I would prefer to do this once.
Hi Mark,
The Trigger Bar won't be out until February or March. We've still got a few other parts we're making for the SUB-2000 at the moment. I wish we could have it sooner. I'll see what we can do to speed things up. Thanks for your question.
Great video. Here are my concerns: I ordered my Gen2, 6 weeks ago, I was #11 on the waiting list, I am now #3. I'm spending X $'s on this new carbine. I really do not want to say use the punch and jack up the ring that you tapped to loosen up or just make a slip and scratch the Gen2 or say I try to remove the safety, that nib/detent is under tension from the spring. If I am not careful BAM, or should I say Boingggggggg, that nib will take off like a rocket and I end up not finding it. I believe I can do this but that ring may really be locked in (lock nut glue) and then I'm forced to really hammer on the punch.
One other point, am I missing something here? I never saw you remove the old plastic trigger and inserted the new one? I don't think a strap wrench (which I do not own) will do the job
ThankX
If you don't hear the metallic click and the trigger doesn't reset what could he the issue?
Successfully installed.
Had to wait two weeks for me - I stripped two of the inserts and had to wait for Kel-Tec to ship me some new ones, and they arrived while I was out of town. Any chance of making those in the black oxide steel?
Yes Sir! They are available here on our website: www.mcarbo.com/kel-tec-sub-2000-grip-pin-upgrade-kit.aspx We've had plenty of request for them because of the bare aluminum stock inserts striping out.
Pro tip: put the plastic bag the springs come in over the grip when installing the safety detent. If it flings it will go into the bag and wont shoot across the room like mine did.
question my trigger hinge pin the silver pin does not full sit in the trigger assembly do I need to hammer it or is it fine not being fully in sunk in?
sent on Facebook and via email got no response.
having trouble removing the c clip from the cross bolt safety any tips thanks?
Hi Nick, The best way to get the c clips off is to use two punches and apply equal pressure to both sides like in the video. Sometimes a bigger punch will make it easier. What are you using now?
Why not polish everything once it is out? Wouldn't that make for even BETTER function of just about everything?
If you are on the fence about this, jump. Get it, so worth it. night and day difference. this is what the factory should be doing. Pair this with the Mcarbo trigger and trigger fuard, and the Gen 2 is awesome!
Thanks Brother for your feedback and support! I'm glad you like it. We've got more accessories on the way for your SUB-2000.
Hello I purchased a trigger spring kit for the kel tec sub 2k and the trigger return spring is missing from the spring kit. I was wondering if you can send me the one spring?
Hi Nick,
I apologize for that. Send us an email to help@mcarbo.com and we will get you taken care of Immediately. Thanks for contacting us
I can't get the hammer to lock back to put the safety back in. Have reassembled several times and can't figure it out. Any ideas?
Hey Brother did you use the Assembly dowel? It's cut to the exact length and diameter necessary for this application. www.mcarbo.com/3/8-x-8-assembly-dowel.aspx
Is there a video for the gen 1? or are the instructions identical?
Hi Joey, Thanks for the question. The instructions are pretty similar for the gen 1 and gen 2. You should be ok following along with this video.
Thank you for the quick response!
Great vid!! I just put a sub 2000 on order! also just subscribed. you are welcome to WatchesGalore
Thanks Brother! We appreciate the support! We've got a lot more on the way for the SUB-2000.
MCARBO Awesome!!
Any way to get this down to 2 or 3 lbs?
Hi Jessi, If you have a gunsmith do some polishing to the internal parts it will help. Not sure you can get the 2 or 3 pound trigger you want but I have seen 4.5lbs.
Can I put a binary trigger on one of these
No nigga ahhhaha
Clear the weapon...AFTER testing the trigger...? Obviously you did before that, but It is odd to make a big deal about it after having already pulled the trigger twice.
Thanks Marquis for catching that. We must have mixed up the scenes during the editing process. I will make a note on the video. Thanks again.
Great. Now how do I get rid of the massive take up? I like ZERO take up. I would prefer the trigger broke EARLIER in the travel too. Basically move everything mechanical forward.
This means modifying the trigger bar somehow. WHY dont you guys offer a custom trigger BAR that takes care of all that?
Hi Dave, thanks for the feedback and idea. We recognize the good amount of take up/ pre travel that exists on the SUB-2000. We're in the process of making a trigger bar to eliminate pre travel. I'm glad you want a solution for the take up. Keep an eye on our channel for its new release.
MCARBO
Thanks for the quick, kind reply! :)
I did not really want a Sub 2000 until I saw all your products for it. They are all so needed. I LOVE your trigger guard. That is one beautiful piece of work that happens to be highly practical and IMO necessary.
Since I am an armorer I figured I could install some sort of set screw since making or modifying the trigger bar is outside of my purview....no machine shop :(
But that is not what I want. I DO want a new trigger bar!
I have big hands and long fingers. A new trigger bar properly designed would start the sear travel earlier in the trigger's travel. The break would ALSO come earlier which is much more ergonomic and gives less finger cramping over extended range time. That is EXACTLY what I want!
The sub 2000 continues to sell OVER MRSP for 9mm Glock models. So there will still be a strong demand for quality custom items such as you make.
While I have your attention, I have one more request which I think you may also be considering. Flat triggers. Flat triggers are beginning to outstrip curved triggers in popularity. I personally will NOT use a curved trigger. You can find flat bows for Glocks. CZ Evos and yes even the Sub 2000.
I prefer to buy ALL my products from just one source such as yourself.
So...why dont you consider making a trigger like THIS?:
www.amazon.com/Kel-Tec-2000-Wicked-Trigger/dp/B01JF74NCY/ref=sr_1_1?ie=UTF8&qid=1473602886&sr=8-1&keywords=Kel+Tec+Sub+2000+%22Wicked%22+Trigger
I cant WAIT to see your trigger bar. And of course the accompanying installation video. Your videos are so well made and pleasant to watch. Professionally done and they illustrate your passion and enthusiasm for designing and making your product as good looking and good working as possible. Keep on doing what you are doing.
I cant tell you how much I love your products and positive attitude. "Merica!
Hi Dave,
Thank you for your appreciation and support! It's really motivating to hear this sort of positive feedback. It lets us know were on the right track and making a big impact. I can't thank you enough for the support and encouragement. I''m happy we motivated you to get a SUB-2000! We've got a lot of new parts in the making for the SUB2K. I've had a few requests so far for flat/straight triggers and I think we should make one. So I'll say it now Yes, expect a flat trigger from us in the next couple months! Thanks again for your positive attitude and support! If you have any additional input on what you would like to see in a flat trigger send me an email: chris@mcarbo.com
Thanks again,
Chris
MCARBO
You are welcome, Chris. It is firearm companies such as yours that makes me ever so proud to be a gun owner.
There are such amazing good people out there such as yourselves. It makes me wonder why the left thinks we are all evil demons. Life is such a mystery. Isnt it?
*****
Ha ha. 'Merica!
Well now! I was fine with this rifles quirky build quality until the "castle nut" or receiver nut that does not really thread onto any thing (WTF Kel Tech)? Is this all about?
We we're just as surprised to see that too. It doesn't make any sense.
That could be a possibility
Your site advertises "Reduce your trigger pull from a stock 9-10lbs to a modified 4.75lbs", but your video proves this is not the case at all.
that bolt is sooo dry"
We probably could have used some CLP on it. Thanks Rudy!
This is probably the most rushed installation video ive seen you guys make. Had plenty of issues throughout the process following along with the video. Bummer.
Great tutorial,thanks !!!!