How to Remove and Replace the Headlight on Ford Escape 2001 2002 2003 2004 2005 2006 2007
HTML-код
- Опубликовано: 25 фев 2016
- How to Remove and Replace the Headlight on Ford Escape 2001 2002 2003 2004 2005 2006 2007
► Our Website for Tools, Parts and more Videos: mechaniclifestyle.com
In this video we are showing you how to remove and replace the Headlights on a Ford Escape First Generation. It will be the same procedure for the Left Passenger Side Headlight and the Right Driver Side Headlight.
Unfortunately you will not be able to remove the headlight without removing the bumper because there are 2 hidden bolts. One bolt is on the bottom side of the headlight and 1 is on the side close to the fender. You will not need any special tools Just pliers, screwdriver to pry the clips open and a 10mm socket or wrench. If the plastic clips on the bumper cover break you can get replacements on eBay. We have purchased 20 clips for less than $5.
IF YOU NEED TO REPLACE THE HEADLIGHT BULBS YOU DO NOT HAVE TO REMOVE THE HEADLIGHT. We have that video on our channel as well.
This procedure might work for Mercury Mariner first generation since they share the same platform.
This video should cover:
2001 Ford Escape Headlight Removal and Replacement
2002 Ford Escape Headlight Removal and Replacement
2003 Ford Escape Headlight Removal and Replacement
2004 Ford Escape Headlight Removal and Replacement
2005 Ford Escape Headlight Removal and Replacement
2006 Ford Escape Headlight Removal and Replacement
2007 Ford Escape Headlight Removal and Replacement
► 2ND Channel Subscribe: bit.ly/2a86p9Z
►►Honest Product Review Channel: bit.ly/2ygqUcy
► BMW E46 ZHP PROJECT bit.ly/2g8tOa9
► Ford Fiesta ST BUILD bit.ly/2a59UKp
► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
Let Us Know if the Video was Helpful!
Like Us on FACEBOOK: / worldmechanicsofficial...
LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
We upload a NEW VIDEO EVERY DAY!
*Disclaimer
We, World Mechanics, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not World Mechanics. - Авто/Мото
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/channel/UCJ9xpq0qUZevSEdBSFqO2ow
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
When step 1 to replace a headlight is "Remove front bumper cover" let the swearing begin.
Kenny Wiley I'll just walk. lol
Alternaters on theses are the worst thing ever just replaced mine 3 times
my exact thoughts.
@@JamesSmith-ny7le I did mine, and was told a 2 hour job from one video.. it was more like 12 hour job.
@@JamesSmith-ny7le Yep, gotta pull the front axle. When I first heard that I thought "No way in hell is that true"
I only undone the screws up top and the plastic Clips on the one side and you can pull the side you need to do down
Awesome video--good clean audio and images for guidance! I need to do this to replace a fogging headlamp assembly on my Escape, and you make it look very easy, thank you!
Thanks for the video, very helpful. However I took a headlight out without taking the entire bumper cover. You can take the clips off on one side and pull the BC down to access the screw in the bottom of the headlight.
I would do the same
Its actually easier to do this then to pull the wheel well wall down and reach in to change the blinker... waaay easier to pull the bumper off and just yank the whole light assembly out. Thank you very much. Was literally on day two of , "how the fudge?!" To change the blinker
This was for my 2001 ford escape. Had minor front end damage as well as the bumper lights. I don't know if it was because the wiring harness is moved/ in a different position but there is no room to squeeze your hand up in there from the wheel well to get the blinker out. Had to remove the whole lense
This was very useful when I replaced my 2005 Escape Limited headlight assemblies. Some minor differences in location of bolts and fender clips.
Thank you. I used the video at a DIY junk yard. It was very helpful.
appreciate your straight forward easy to follow videos!!
2002 Escapes have a completely different headlight assembly. They changed the design to the one depicted in this video in 2003. It is much easier to remove/replace headlight bulbs on a 2002 Escape. You can reach the bulbs from inside the engine compartment.
Norman Lauver can't replace the blinker in the engine bay
This isn't about the blinkers. It's About the headlight bulbs. Those you can replace from the engine compartment on a 2002 Escape.
Norman Lauver I'm aware, I've changed them a few times and finally to LED. just saying you have to remove the whole light assembly to change the blinker
have you any informations about the compatibility of headlight of 2002 model to replace with headlight of 2004 model?
Thanks for the vid. Saved a lot of research.
Very useful explanation, thanks 👍
Thank you I now fixed my lights
in Australia 01 ford escape doesn't look like this..the front bar has a square fog lights and the headlight is an old school lights..i wonder if that projector can fit it?
How about a 2017 for escape??? Planning to replace headlight projector bulb to an HID.was looking at the manual and said only 2 screws. But doesn't move a bit.i think the manual is wrong??
How to remove the fender on model 2005 Ford Escape video please
Damn! Changing out the bulbs on my Silverado only requires raising the hood.
2001-2004 Ford Escapes have a completely different headlight assembly. This design applie to 2005-2007.
Where did you get those headlights? And would they fit a 2002 ford escape?
Very good thanks
Why couldn't Ford make an access to those two bottom headlight bolts instead of having to remove the whole bumper cover?
Makes you wonder what engineering school these asses went to.
Robert Burns There's a much easier way. This tutorial is incorrect.
It is correct, 05 is even worse
Good video
Thank you
Anybody know how much this costs at maybe Walmart or any mechanic shop? Labor and parts?
Well at least you dont have to remove the wheels ^__^
Albertthegreat2010 that’s the least of my frustrations i could have the wheels off in 3 1/2 minutes
omg what a pain in the ass just to replace bulbs or get some water out.
lifehack: NOT use right bottom screw. In the future, it will not be necessary to remove the bumper.
you've got to be fucking kidding me
That's bs all that to replace a headlight
you should see the other way dude both suck
In order to replace the indicator bulbs, you have to completely remove the fender liner. It takes 45 minutes to do that. You cannot change the indicator bulbs from under the hood.
and THIS is why I will NEVER buy a Ford again. Morons design these trucks.
Gm is worse
@@goalie996 nowadays. They used to be the kings of ease of access.
Mazda and Nissan are even worse. Don't even get me started on the Honda Accord 03-present.
holy hell. never ever ever buying a ford
What a poor ass design
Horrible video!!! how do u disconnected the low beam. Uake it look like it car has no headlight bulbs
How to remove the fender on model 2005 Ford Escape video please