How to: Keyed Ignition 2017 WR450f
HTML-код
- Опубликовано: 4 янв 2018
- This is specifically for the late model Yamaha WR450f but can be used universally for any motorcycle!
Here’s a link to how I wired the bike for it to be street-legal in TX: • How To: Wire your dirt...
The blue and orange wires I used are from the Tusk enduro wiring harness. The wires were intended to be used for the blinkers but in Texas, blinkers are not a requirement.
Baja Designs Key Switch: amzn.to/2HRQURi
Baja Designs Brake Light Switch: amzn.to/2qL8COq
Tusk Enduro Lighting Kit Wire Harness: amzn.to/2HOD56q
Tusk Compact Control Switch: amzn.to/2Hi64m7
Waterproof Round Loud Horn: amzn.to/2Hh3Z9N
Dorman 84790 Headlight Socket: amzn.to/2Ja96Fy
Tusk Left Hand Dual Sport Mirror: amzn.to/2K2PHHL
WR450f Accessories:
Unbreakable Levers: amzn.to/2TJpHFM
Tusk Rear Fender Bag: amzn.to/2IakSPY
Tusk Front Fender Bag: amzn.to/2KUXlVa
Seal Savers: amzn.to/2HNuVek
Yamaha Competition Ecu kit: amzn.to/2HUjsKl
Kenda K270 Fr: amzn.to/2HUk5nb Rr: amzn.to/2HiEG7D
OPT7 LED Headlight: amzn.to/2HMVyjz
Pro Taper Pillow Top Grips: amzn.to/2TJSj1t
Pro Taper Windham Bend: amzn.to/2HNVYpU
Tubeless Tire System: amzn.to/2K4Mvvg
Pro Taper Pillow Top Grip: amzn.to/2JbGWd6
2018 MT07 Accessories:
Fender Eliminator: amzn.to/2UQOk3m
Adjustable shorty levers: amzn.to/2E4UM1c
Magnetic drain plug: amzn.to/2USIC0O
LED Sidemarkers: amzn.to/2TK1SgT
Camera Equipment:
Sena 20S Bluetooth 4.1 Com System: amzn.to/2HjH3qE
Sena GP10 Bluetooth Pack (for GoPro): amzn.to/2K4twRh
GoPro Hero4 Black: amzn.to/2Kd3sCR
Gear:
LS2 Helmets Pioneer Trigger Adventure Helmet w Sunshield: amzn.to/2HO4yF5
Forma Adventure Motorcycle Boots: amzn.to/2Icd2Fu
Joe Rocket Gloves(touch screen compatible): amzn.to/2rzB8nr Развлечения
dude this was super helpful im in the process of converting my 18' yz450f into a street legal bike
Dude it’s been two years, I have a 2018 YZ 450f. Can you please help me with a key over a call
My discord is Forgotten#1283
@@Kazenn u found the key yet
@@Kazenn ruclips.net/video/syE1tisghlw/видео.html
Sweet video man. Super helpful for me with my 2014 yz450 street legal build, here in California!
the way i did it i used the green and black/white and i put them into the kill switch and used the black and red for fuel pump
Finally a good vid.. without nonsense in it 👍👍👍🧔
Ohh man I was over thinking it I 100% got it now thanks lol I'm dumb I was co fused lol great video thank you!!!!
What if I don’t have a fuel pump would I just wire the key ignition, just like the kill switch?
How would this work if you only have an electric start? I have a ttr230
ive fone the same with my wr450 and had some issues where the electric starter doesnt start the bike with the key in and everything, do you know why this may be happening ?
Working on a project 2013 crf450r to make it street legal. If you could offer some advice on what to do to make the key switch help dis/connect headlight taillight accessories. Bike is not electric start as is
The 2019 wr doesn’t have a kickstart so we can just break ignition circuit correct?
You have a part number for that ignition switch ? Just bought a 19 and want to do this
Was wondering where u ran the wire from front to back ? Are u going 2 answer me back on this question ?
Can you post a link where you bought the parts and thenpart numbers please?
Hey man can you do a video/ or just comment the details on that kill switch?
Wouldn't it be better to wire it to the on/off switch? If the key is in and turned the on/off switch circuit is closed. If key isnt in the on/off circuit is open. These do have on/off button, right? At least my friends old 06 did have one.
No they don't have on/off
Does polarity matter?
Yoooow the new Husky FE 350 2020, has it a lock??
Would this work on a yz?
Great video man, what year is your bike?
Hey dude am just trying to do this on my 2017. Quick question, why do you need 2 red wires? Can't I just just tap the red/blue straight into the ignitions red and then tap into the fuel pumps black ground from the ignition?
SICSLIPKNUT I suppose you could, this to me was the simplest way.. all you need is to open the circuit one way or another !
@@LostMoto cheers for the response. I am going to follow your method just to be safe. Also am mounting the key under the left side panel near the rear strut so I don't have to drag the wiring all the way haha
I am trying to do this on my 2018 Wr450f and I am having trouble, since I do not have a kick start i can wire this into my starter relay, but i have no idea
ShortyMoto you still have a fuel pump, take the bike apart until you get to it. Owners manual will help guide you there
I’d still suggest wiring to the fuel pump, this will prevent bump starting as well. I also find it easier to wire that way
How did you wire in the lights to the switch? Use the other two wires that are laying dead?
Now if I’m not mistaken those two other wires would work for a starter, like a car, I’m not sure they would work for lighting, but if you could find a way to splice both the lighting wires and the fuel pump wires into the switch the way he has it it would work
So after some time with your key installed did it have any affect on the fuel pump or anything, did it cause anything to wear out faster than normal?
Jason Perry holding up like the day I bought it
Perfect that's what I wanted to hear, I heard it wears out the pump faster but all o have to do is peel off sheathing expose wire put both wires where they go tape them off and should be good to go correct??!!! Or if I'm wrong if you could so kindly write the steps of the way to do this I'd appreciate it a million me and my lady both bought 2018 yz450fx and 2017 250fx all street legal now so really want a key in it!!! Thanks you have an amazing to the point video recommend anyone watch this installing a key!!
I feel like it could cause the starter to wear out but that’s just me
Does this retain the stock fuel light function?
Dennis Brown YES
Can you make it so it cant start if they cut the wires?
In theory no, as it is a normally open circuit anyway. (Cutting the wires will open the circuit).
where did you buy it from and didnit come with the bracket?
YES
Hey I followed your instructions on your awesome video, the only difference I'm encountering is I can pull the key and the bike will idle until it runs out of fuel pressure. This seems to take over 6-7 seconds each time. I have a new 18 wr450.
Scott Koehnen yeah that’s what mine does as well, I figured that’s how it would work when I put it together
Just kill the bike with the kill switch
I don't have a fuel pump :( guess I have to connect it to gravity.
What, wr450f don't come with a key ? So no factory security ?
It's a race bike, technically
I just got a 2018 so there's no kickstart so I would tie it to the start switch. I just wonder if you can still bump start it.
how did this turn out? I have a 2018 to
@@ShortyMoto wouldnt wiring it to the on/off switch work better?
The bike would still bump start by the same principle that it would still kick start, the motor will still receive fuel
Does this bike okay to register for roads?
yes. if it has a working light(front and rear) and a mirror
Depends on state,(or province) I live in Ontario Canada and it is impossible for me to street legalize a dirt bike
Just tap into the kill switch so when the key is out of the bike it's as if the kill switch is pressed
I did that and it will drain your battery
It really depends, if the kill switch completes a circuit when pressed then I don’t think that would work
@@aidanvelthuis1267 just would need a reverse or dual polarity key switch pal. But either way it would really just be a visual deterrent, as you'd just have to snip the wires and the bike would be ready to start again 😂.
Or they got a truck and load it up