Hi. 2017 Rogue. Followed your instructions. Went perfect....but when the car starts, exterior lights blink ON every 3-5 secs or so. Shouldn't they remain ON as long as the car is running?
Worth the money no extra remote and no cutting .. I had the bcm that pulled out made it much easier to plug.. the worst is getting clips off and stuffing extra wires in ..
How did you get the BCM pulled out? I can't get my hands in there well enough to get the plugs up top out in my wifes car and pulling the BCM would be way easier.
Completed install on 2014 Nissan Rogue - thought it was all OK and it tested fine - but then noticed that my heating system won't turn on. Like no digital display or lights when I press the heating system to come on, and no fans or anything come on. @Accessorides Please advise.
I enjoyed your video. It was very helpful. I have a 2016 Nissan Rogue. Is there a way to remove the module so you dont have to undo the connectors in that tight spot under the dash? Thanks.
Hey so anyone installed this on a key ignition? Im buying it for my moms car and i want to make sure it works, this is the only one I've found that claims to work for the key ignition. Thanks for the help
Beasty-jem - Most OEM remotes get somewhere around 150-300 ft. Whatever distance you can lock it from now you will be able to start it from. No more or less. Thanks!
You cant see where you are putting things or a clear view of what you are doing. What is where, any of the important items its just a verbal walk through.
Elizabeth Julia thanks for the feedback! Unfortunately its a tight area getting a hand in there and being able to position the camera to show whats going on is a little tough. Once you get the car apart its pretty straight forward then once you are done just secure the module up above the BCM. Thanks!
I recently purchased and installed this in my 16 Rogue SL. It seems to work as expected but I’m getting a smart key system error on the instrument panel. Is this typical or do I have something installed incorrectly? The vehicle runs and drives just fine.
Did your error ever go away? I installed this on my 2016 4Runner with a regular key start with no issues. When I installed on my best friends 2016 Nissan Rogue with push start, I get the same error you got. I contacted Accessorides and they sent me instructions to reset the module. I tried resetting the module, but never got the correct light sequence to show module was ready, nor would the car start with remote. I contacted them again and they're sending me a new kit to try.
@@leastridge7489 did you ever get this figured out? I installed my kit today on my 2015 rogue and it starts remotely but I get the key system error on the dash when I get in. If I push the brakes the car turns off. However if I start the car with me in it and my key fob the car is fine, no error.... would seem like there's an issue with the takeover part from the remote start to driving the vehicle...
Not a "fully plug and play" for 2017 Rogues. Requires punch keys for one of the options "If the 10th digit of VIN is H". So now my dash is torn apart and no one is there on support on a Sunday. Also, it would be helpful to show where you zip tied the add-in rather than just show us where to plug in cables.
@@chrisb9445 Don't remember, but the remote start doesn't work this year. Haven't troubleshot it yet, but I think it was in the manual about the punch.
Very helpful video. I was able to install this on my wife’s vehicle in under an hour. And I have no mechanical/wiring training.
Bought this kit and is truly 100% plug and play and easy to install. Works like a charm.. thank you accessorides
Just put one of these in my 2014 Rogue. This is an excellent product and is simple to install. Total time for me was about 1.5 hours!
can u send a pic of the module you have plzz
Any problems with it working or causing other problems with the Rogue? I want to put it in my 2014. Thanks
How much is the kit 2018,rogue
Hi. 2017 Rogue. Followed your instructions. Went perfect....but when the car starts, exterior lights blink ON every 3-5 secs or so. Shouldn't they remain ON as long as the car is running?
Worth the money no extra remote and no cutting .. I had the bcm that pulled out made it much easier to plug.. the worst is getting clips off and stuffing extra wires in ..
How did you get the BCM pulled out? I can't get my hands in there well enough to get the plugs up top out in my wifes car and pulling the BCM would be way easier.
@@christianforgione8805did you ever figure this out? I’m having the same issues
Completed install on 2014 Nissan Rogue - thought it was all OK and it tested fine - but then noticed that my heating system won't turn on. Like no digital display or lights when I press the heating system to come on, and no fans or anything come on. @Accessorides Please advise.
Where do you wire in the hood pin kill switch for the 2016 rogue?
this was the only thing I wasn't sure about either
I enjoyed your video. It was very helpful. I have a 2016 Nissan Rogue. Is there a way to remove the module so you dont have to undo the connectors in that tight spot under the dash? Thanks.
Did you ever find a solution to this? I’m having a difficult time reaching in to unplug and plug in the new connectors
I just bought this item for my rogue. I will update when i get it and installed
So this is legit i got mine couple days ago, i did everything as this video and instructions said. Works like a charm. There wait was worth .
@@123anothergamer how long did it take you?
@@mishalaraiminholmes9632 to do the full installation took me like 30 minutes.
@@123anothergamer what was the programming steps? I got mine and I'm having an issues getting the starter to work
I'm surprised people found your video helpful.
What are you was doing i I only saw conecting cables
Have video 2018 Nissan pts pathfinder also can u add long range remotes.
Bought from where?? Dont see a link
So it's not so " plug and play" after all. What'd with all these customers report this dash light error warning??
What is the name brand and model number of the remote start that everyone is using
I got this for my girls car it works great but when we get in and tap the brake the car turns off anyone know why?
How can I buy it!
I just bought the same,, and installed on my rogue 2019,,not working normally,, there is error messages showing on
MSHARY If you are having any issues with our kit give us a call let’s see what’s going on!
@@Accessorides please give me phone number
Hey so anyone installed this on a key ignition? Im buying it for my moms car and i want to make sure it works, this is the only one I've found that claims to work for the key ignition. Thanks for the help
Just got mine today for the key start. When I have it installed I’ll hit you back
what's the range for oem keyfob?
Beasty-jem - Most OEM remotes get somewhere around 150-300 ft. Whatever distance you can lock it from now you will be able to start it from. No more or less. Thanks!
Accessorides ok I bought one from your store in eBay
It is not plug and play. Got it all hooked up and it does not work
How to get Time adjustment
There is error Message!
You cant see where you are putting things or a clear view of what you are doing. What is where, any of the important items its just a verbal walk through.
Elizabeth Julia thanks for the feedback! Unfortunately its a tight area getting a hand in there and being able to position the camera to show whats going on is a little tough. Once you get the car apart its pretty straight forward then once you are done just secure the module up above the BCM. Thanks!
I recently purchased and installed this in my 16 Rogue SL. It seems to work as expected but I’m getting a smart key system error on the instrument panel. Is this typical or do I have something installed incorrectly? The vehicle runs and drives just fine.
Did your error ever go away? I installed this on my 2016 4Runner with a regular key start with no issues. When I installed on my best friends 2016 Nissan Rogue with push start, I get the same error you got. I contacted Accessorides and they sent me instructions to reset the module. I tried resetting the module, but never got the correct light sequence to show module was ready, nor would the car start with remote. I contacted them again and they're sending me a new kit to try.
@@leastridge7489 did you ever get this figured out? I installed my kit today on my 2015 rogue and it starts remotely but I get the key system error on the dash when I get in. If I push the brakes the car turns off. However if I start the car with me in it and my key fob the car is fine, no error.... would seem like there's an issue with the takeover part from the remote start to driving the vehicle...
Yo do you have those instructions??? I could use them like right now... @leastridge7489
Not a "fully plug and play" for 2017 Rogues. Requires punch keys for one of the options "If the 10th digit of VIN is H". So now my dash is torn apart and no one is there on support on a Sunday. Also, it would be helpful to show where you zip tied the add-in rather than just show us where to plug in cables.
Yep still 100% fully plug and play for the 2017 - 2019 models!
What did you have to punch in?
@@chrisb9445 Don't remember, but the remote start doesn't work this year. Haven't troubleshot it yet, but I think it was in the manual about the punch.
You’re kind of garbage for not including the fact that it is push to start