Dear all, I am going to take this commenting space as an opportunity to state the requirements if you want one of these priming units. 1. I cannot and will not send units to anyone who are not safety conscious and not aware of the hazards of operating such units, though I can't quantify this through messaging alone so I'm just going to put it as Adults only. I will not be liable if you hurt yourself. The users of these units sent are all well briefed before receiving it. Dangers from badly handled Lipo batteries and mechanical strength this puts out can severely hurt you. 2. As there might be a possibility of troubleshooting involved in future if it so happens to break, however remote, I will want the buyer to have some basic knowledge in electronics and soldering skills for ease of troubleshooting together with me, unless you stay in the same country as I am in Singapore. This is so I will not be burdened or overwhelmed by an overseas repair request etc, I am honestly running my brand single handledly, amongst other things in life. 3. There will be moments where other people will want to try out your new toy. It will be your responsibility to put forth the hazards before the other person handles it. I will not be liable if someone else gets hurt while using this. 4. If you make it to the waiting list, you agree to wait until it is ready. I am only making these units during my free time as such I will not require any deposit from you until it is nearing and ready to ship. I will not be treating these as "usual orders that have a fix time to deliver" and you can reject the order anytime without penalty. These units take a lot of time to personally print and assemble together and test. Lastly this list is non exhaustive, but hopefully you get an idea behind the vetting process. Ezekiel.
2 questions. 1: can it support a K26 spring And 2: can you tweak the motors to speed up the fire rate so that it's almost full auto? (As in, you hold the trigger, it keeps firing till you let go or you make it fast enough to compete with flywheel fire rates)
this is the coolest thing to come out of the nerf hobby in a loooong time like even from an mechanical standpoint this thing is outstandingly awesome i love it
Ykc Diamondrex we pretty much are but once we get there there’s no going back to the way things were before, soon it’ll only be half darts, full auto caliburns, semi auto longshots, full auto homemades and semi auto hpa blasters 😅
@@GrimzNerfWorks there are as few full auto 3d nerf kits like MHP and woozi. Theres a dude in austrialia that has s semi auto hpa. I think it's pretty neat to see how far we've come
Joseph Torres it is very impressive to see how things have gone, but what I was more referring to is the more insanely high FPS with not much noise or having to prime. These things that make them more airsoft like and are cool but soon they will become overpowering and simple to make so, at that point we can’t turn back as anyone running a 150 FPS flywheeler would be outranged by a full auto 300 FPS caliburn, which is a worrisome thought
@@GrimzNerfWorks Flywheel tech is advancing too, right now there are 200+ FPS brushless single stage Stryfes and stuff running around. I'm sure it's only a matter of time before we see 250 fps with multi-stage brushless setups. Maybe I should be the first...
BoostAddict oh yeah for sure, the only thing is, is that I feel flywheels will eventually hit a plateau, and in some regard they already have you can really get those high numbers and rate of fire with flywheelers and have a consistent accuracy, this is where once we really get into higher and higher FPS flywheels will start to make less and less sense, but that’s just my opinion
I could see giving the LS a "rev" trigger and attaching the priming button to that. Looks great, I just wish there was a way to have all that be internal.
🤦♂️. You did read my comment right? I said I was still finding parts. And I only need one air source. I have a “Y” splitter npt quick connector. I trying to find a piston with the correct stroke that is also small enough to fit inside a nerf blaster.
@@BlitzMekanika ooh that makes sense. Sorry, thought you meant to do the (exact same thing) just using hpa instead of the spring and plunger. I'll go away now.
"...if you're creative enough you could part with your own mortality." Is like seeing "viewer discretion is advised" at the beginning of an action movie. Settles in with the popcorn.
I've been following this project for what seems like such a long time. Been wanting to get one since it 'finalized it' but I can't afford that chunk of change :'( Have so many ideas for a project with this thing!... but I wouldn't definitely need to cover some of those areas so I don't rip my scalp off.
IAmBobololo people including the designer are busy making those already, one commenter said he already has posted some on thingiverse so you need not worry
YES! Dude, I have been waiting for this. It’s not for me but I love this stuff that’s straight up engineered. Keep up the awesome content sir. And maybe look into the Orange Mod Works internals.
Wonderful video, Ezekiel's kit is both exciting and terrifying at the same time. I am concerned about using my 200 fps caliburn, but "Full Frontal" makes it look like a jolt.
Idea: if you want an even more lethal kit, maybe you could use a boat motor. The trigger can act as a normal trigger and a throttle for the engine. The motor pulls back the priming bar to a certain point to pull back the spring. Another trigger in the trigger cover (like a newer Nerf mag release) makes the motor go into reverse and puts the bar back into position (I just got into car motors recently so I believe the part that reverses the motor movement is a clutch? please correct me if I'm wrong because I feel like I am). Now not only do you have to worry about darts now, but also gasoline, your life, your blaster, and whatever the gas might spill on later.
If the creators were to refine and minimize this kit, maybe add a 3d printed shell and make the arms internal, this would be an awsome kit. Not that it isnt already awsome, just seems a bit dangerous to have all of the mechanical workings on the outside without any shelling or anything. Great video as always Walcom.
I've drawn up the most critical cover this morning, WalcomS7 has access to them. I can draw more covers to cover all 4 corners, but honestly speaking I think the rear left is the most critical.
Awsome blaster Walcom. Please... please glue some shell reinforcements into that shell... there are perfectly matching filaments and with this kind of power you really need it to stay in one piece for any prolonged period of time.
I fear no man.. But that thing... *clip of Walcom running towards me with darts whizzing by my head and me hearing the sound of gears screaming in pain as they enable him to send me to the shadow realm* It scares me.
This thing is scary, I don't think people quite get how dangerous it is. I think if I had one I'd be making covers for those racks. Looks sweet though.
Hey Walcom, You mentioned poor performance for your longshot so I'll share a recent experience. I'm building a longshot myself, the first game was last saturday, and it just plain wouldn't shoot. It also has a 100% seal but it just refused to shoot darts outdoors (works in my home.) A friend of mine also brought his very similarly specced longshot and his works beautifully. The critical difference is I'm using an artifact barrel, and he's using a monkee mods one. Mine jams up or severely drags in the barrel and his doesn't. So, if that is indeed a red artifact barrel you're using there, that may be something to consider. Hope that helps!
son of a gun. you really did it, you made a nerf gun semi-automatic without pushers nor motors like real steel guns. :) :) :) :) oh boy, cal burns are about to be a thing in the past once mastered .
This really needs some sort of cover over all the mechanisms, both for safety reasons and to prevent any dirt from getting in and jamming the system. If you could somehow make it clear that'd be awesome
If you prime the blaster, then load a dart from the front and push it with a ramrod, does it fire as expected? I had a vacuum loading issue on my ls with similar symptoms to yours. Cutting slots into the pusher fixed the issue.
I wish Ezekiel would collab with Worker or another nerf modding company to get this thing properly mass produced. Wait list is around a year and this seems to be the only video other than his showcasing it.
Walcom, are you still using the worker 18kg longshot spring? Because if you are, that plus the extended monkeemods barrel will be why it's not shooting well. It's a terrible spring and that'll be too much barrel for it.
Dude...walcom...im so jealous of your apparent hobby budget. Multiple caliburns, metal internal kits, talonclaw this monstrosity, an entire garage of some type dedicated to various nerf relates paraphernalia ....is your hobby budget just a rain dish to catch the funds that are showered upon you?
i would honestly end up putting shields over the moving parts; maybe aluminum or something. that way it wouldn't catch on clothes or hair or whatever else there is.
Dear all, I am going to take this commenting space as an opportunity to state the requirements if you want one of these priming units.
1. I cannot and will not send units to anyone who are not safety conscious and not aware of the hazards of operating such units, though I can't quantify this through messaging alone so I'm just going to put it as Adults only. I will not be liable if you hurt yourself. The users of these units sent are all well briefed before receiving it. Dangers from badly handled Lipo batteries and mechanical strength this puts out can severely hurt you.
2. As there might be a possibility of troubleshooting involved in future if it so happens to break, however remote, I will want the buyer to have some basic knowledge in electronics and soldering skills for ease of troubleshooting together with me, unless you stay in the same country as I am in Singapore. This is so I will not be burdened or overwhelmed by an overseas repair request etc, I am honestly running my brand single handledly, amongst other things in life.
3. There will be moments where other people will want to try out your new toy. It will be your responsibility to put forth the hazards before the other person handles it. I will not be liable if someone else gets hurt while using this.
4. If you make it to the waiting list, you agree to wait until it is ready. I am only making these units during my free time as such I will not require any deposit from you until it is nearing and ready to ship. I will not be treating these as "usual orders that have a fix time to deliver" and you can reject the order anytime without penalty. These units take a lot of time to personally print and assemble together and test.
Lastly this list is non exhaustive, but hopefully you get an idea behind the vetting process.
Ezekiel.
CreateWithEzekiel Amazing kit man and wasn't planning on buying one anytime soon
Awesome kit
First thing that came to mind when I heard about it being dangerous was "what ways could I make it safer".
This is an awsome kit, I really hope these end up being a success as I would love for more and more stuff like this to be made. Good luck to you😉
2 questions.
1: can it support a K26 spring
And
2: can you tweak the motors to speed up the fire rate so that it's almost full auto? (As in, you hold the trigger, it keeps firing till you let go or you make it fast enough to compete with flywheel fire rates)
Your stampede looks a bit funny. Its really cool though
Yeah it's basically a stampede
Lol
That's what we should call it from now on
There is a photo of a recon with a gearbox that made it automatic this became the stampede Walcom now has it but it is direc plungered
Beat me to it
You'll be seeing this in it's final form very soon, just have to work out why my longshot fires so terribly and modify a 3D printed kit to fit on top.
your red longshot's name full frontal is a referance to mobile suit gundam unicorn correct
@@draxusdemos8266 Clearly.
For the glory of Zeon!
Does he also make one for the retaliator?
Hi
Is anyone else scared about walcom running around with a 300fps auto prime longshot😨
We all know he could do worse thank goodness he doesnt dare run a singled titan
@@samdesplancke3906 true but still as he says "one man should not have this much power"
yes
Eli Wu has a project of a full auto Caliburn
@@rickcupola6262 I saw that and that just makes me even more terrified imagine this being use at an n.i.c war your basically the winner
Walcom: drills holes in a crimson strike Longshot
Me: ahhhhhhh!!!!!
I guess that longshot isn't bolt
action anymore...
now it's VOLT action
👏👏👏
No jolt action
Thats a good pun
Your warning reminds me of the OG Recon injures
this is like a stampede, in that its now an electronic springer... BUT BETTER!
and much more dangerous.
worse, because its 69 more annoying to listen i wanted to rip my ears out
Surely someone will design and 3d print a cover to go over the toothed priming bars - problem solved, everything dangerous is now enclosed.
Main Stay I already did. It’s on thingiverse
Neon Dragon links are autoblocked in this comment section for some reason, I tried. Look up EZE autoLS covers on thingiverse
@@shiikon2193 Thanks I've been scrolling for the last 10 mins trying to find them under Longshot on Thingiverse.
@Ethan Parham thats a really good point
this is the coolest thing to come out of the nerf hobby in a loooong time like even from an mechanical standpoint this thing is outstandingly awesome i love it
Kid who thinks he cool for singling his Titan hears Walcoms warning:
yOu CaNt teLL mE wHaT tO dO
Its sooo cool, but I appreciate your warning in the beginning. Soo cool yet potentially dangerous. But still 10/10
Only dangerous if you're stupid. And people are already working on covers for the gears.
Crowe0920 there are full covers for the gear rack now.
We are getting closer and closer to airsoft XD
Ykc Diamondrex we pretty much are but once we get there there’s no going back to the way things were before, soon it’ll only be half darts, full auto caliburns, semi auto longshots, full auto homemades and semi auto hpa blasters 😅
@@GrimzNerfWorks there are as few full auto 3d nerf kits like MHP and woozi. Theres a dude in austrialia that has s semi auto hpa. I think it's pretty neat to see how far we've come
Joseph Torres it is very impressive to see how things have gone, but what I was more referring to is the more insanely high FPS with not much noise or having to prime. These things that make them more airsoft like and are cool but soon they will become overpowering and simple to make so, at that point we can’t turn back as anyone running a 150 FPS flywheeler would be outranged by a full auto 300 FPS caliburn, which is a worrisome thought
@@GrimzNerfWorks Flywheel tech is advancing too, right now there are 200+ FPS brushless single stage Stryfes and stuff running around. I'm sure it's only a matter of time before we see 250 fps with multi-stage brushless setups. Maybe I should be the first...
BoostAddict oh yeah for sure, the only thing is, is that I feel flywheels will eventually hit a plateau, and in some regard they already have you can really get those high numbers and rate of fire with flywheelers and have a consistent accuracy, this is where once we really get into higher and higher FPS flywheels will start to make less and less sense, but that’s just my opinion
You should probably put some kind of shield over the moving parts.
I could see giving the LS a "rev" trigger and attaching the priming button to that.
Looks great, I just wish there was a way to have all that be internal.
Rip priming indicator
Adyn Holden so sad 😢
Isn't that just the best sounding nerf blaster you've ever heard
You know the videos gonna be a good one when it starts with a warning
Someone needs to make 3d printed arm covers for this thing.
Nice. Now you don’t need a foregrip you should under mount a minimised rapidstrike or something
Nathan Blackburn I’m designing a 3D printed single shot mega attachment that uses a stock LS PT
Still trying to do this for my hpa blaster: still chasing down parts. Cool to see this done with a non air powered blaster.
You could use a pneumatic piston for your blaster, then you wouldn't have to use (two) different energy sources
Just an idea
🤦♂️. You did read my comment right? I said I was still finding parts. And I only need one air source. I have a “Y” splitter npt quick connector. I trying to find a piston with the correct stroke that is also small enough to fit inside a nerf blaster.
@@BlitzMekanika ooh that makes sense. Sorry, thought you meant to do the (exact same thing) just using hpa instead of the spring and plunger. I'll go away now.
😅
Wait, what exactly did you mean by "🤦♂" ?
"...if you're creative enough you could part with your own mortality." Is like seeing "viewer discretion is advised" at the beginning of an action movie.
Settles in with the popcorn.
I've been following this project for what seems like such a long time. Been wanting to get one since it 'finalized it' but I can't afford that chunk of change :'( Have so many ideas for a project with this thing!... but I wouldn't definitely need to cover some of those areas so I don't rip my scalp off.
IAmBobololo people including the designer are busy making those already, one commenter said he already has posted some on thingiverse so you need not worry
You're EXACTLY who I thought of when I said, "rip your hair out".
@@WalcomS7 haha I'm not surprised. That'll def do some damage and I like that you gave a warning at the beginning, because this thing is redonk!
OF COURSE! OF COURSE WALCOM NAMED HIS LONGSHOT "FULL FRONTAL!" You got a Stryfe named Banagher, too?
If I had a Stryfe named Banagher I'd have to smash it with a rock. I don't like that guy. He's better than Kamille but only just.
@@WalcomS7 I'm so glad that we can agree on that.
Thats nuts!
I would be worried about losing a finger, or my mortality, in some of those parts though.
YES! Dude, I have been waiting for this. It’s not for me but I love this stuff that’s straight up engineered. Keep up the awesome content sir. And maybe look into the Orange Mod Works internals.
I might go big with a Jet Blaster Omega kit.
Wonderful video, Ezekiel's kit is both exciting and terrifying at the same time. I am concerned about using my 200 fps caliburn, but "Full Frontal" makes it look like a jolt.
Too OP, must Nerf! That is an awesome build. The only way to properly modify a Red Longshot? Add a unique and awesome kit!
Great stuff, boss!
Must
Nerf
After you drilled those two holes in the stock, I had an ad about depression. "And... there's your depression."
that's a cool stamped you got there
Idea: if you want an even more lethal kit, maybe you could use a boat motor. The trigger can act as a normal trigger and a throttle for the engine. The motor pulls back the priming bar to a certain point to pull back the spring. Another trigger in the trigger cover (like a newer Nerf mag release) makes the motor go into reverse and puts the bar back into position (I just got into car motors recently so I believe the part that reverses the motor movement is a clutch? please correct me if I'm wrong because I feel like I am). Now not only do you have to worry about darts now, but also gasoline, your life, your blaster, and whatever the gas might spill on later.
If any of you have more know-how than me about this stuff please reply with your ideas. Like I said I just got into motor stuff.
Hi three year old comment
I've played with Ezekial. Saw this in action personally. Scary.
Stampede: you cannot live with your own failure, where did that bring you? Back to me
Just one thing - i would have serious fear my beard beard could bei cought by the open mechanism. Great piece of technology i think. Great review!
If the creators were to refine and minimize this kit, maybe add a 3d printed shell and make the arms internal, this would be an awsome kit. Not that it isnt already awsome, just seems a bit dangerous to have all of the mechanical workings on the outside without any shelling or anything. Great video as always Walcom.
Well [HECK] me right in the [FRICK] that warning caught me off guard
Just a thought; you could make it at least /somewhat/ safer by putting half a pvc pipe over the gear tracks on either side.
this Stampede mk2 blaster leak lookin nice ngl
Wow that GunZ music in the intro brought back memories
if you don't mind added bulk and ruining your shell, you could print some guards to cover the rail, would minimize risk of losing fingers.
Great video 👍 you put a lot of passion and enthusiasm into your videos and it shows.
Yessss someone finally made somthing like this!! I'm soooo happy
Pretty cool Walcom S7! Well done @CreateWithEzekiel! How difficult would it be to cover up those metal rails? ... hide the moving parts.
I've drawn up the most critical cover this morning, WalcomS7 has access to them. I can draw more covers to cover all 4 corners, but honestly speaking I think the rear left is the most critical.
Completely ballin, buddy. Great video!
Awesome setup
Awsome blaster Walcom. Please... please glue some shell reinforcements into that shell... there are perfectly matching filaments and with this kind of power you really need it to stay in one piece for any prolonged period of time.
Walcom gives carefull methodical disclaimer pertaining to mods shown in the intro.
Me still taking in the intro : ….. Fuckin A!
I fear no man.. But that thing...
*clip of Walcom running towards me with darts whizzing by my head and me hearing the sound of gears screaming in pain as they enable him to send me to the shadow realm*
It scares me.
I saw the thumbnail and I was all "...WHAT THE HELL DID YOU DO TO THE RED COMET?"
This thing is scary, I don't think people quite get how dangerous it is. I think if I had one I'd be making covers for those racks. Looks sweet though.
This kit is looking hella thicc
Damn. Nerf is really changing.
Holy crap that’s awesome
Holy shit an actual marksman rifle
Hey Walcom, You mentioned poor performance for your longshot so I'll share a recent experience. I'm building a longshot myself, the first game was last saturday, and it just plain wouldn't shoot. It also has a 100% seal but it just refused to shoot darts outdoors (works in my home.) A friend of mine also brought his very similarly specced longshot and his works beautifully. The critical difference is I'm using an artifact barrel, and he's using a monkee mods one. Mine jams up or severely drags in the barrel and his doesn't. So, if that is indeed a red artifact barrel you're using there, that may be something to consider. Hope that helps!
It's actually a Monkee Mods barrel.
@@WalcomS7 Oh, well I suppose it's not the same problem I'm having. Sorry dude
Lol your longshot primes 3 times as fast
Beat me to it, dammit
son of a gun. you really did it, you made a nerf gun semi-automatic without pushers nor motors like real steel guns. :) :) :) :) oh boy, cal burns are about to be a thing in the past once mastered .
So wait is there a lock you can remove or something to let you prime it again once it's already primed??
"this is going to be a game changer"
Not if no one can afford it.
This is basically a god stampede
I feel like the next step for this is a full auto one that would be insane.
Yeah, should’ve added “Do not copulate with this thing either” since, yknow.
This really needs some sort of cover over all the mechanisms, both for safety reasons and to prevent any dirt from getting in and jamming the system. If you could somehow make it clear that'd be awesome
Now dracs battle rifle dreams can come true
Speaking of Drac, i just imagined him throwing one of these on his old Night Fury and holy hell, thats a terrifying thought
Ashlynn Preston sadly if you don’t use metal internals such as the worker or artifact one it’ll shrek the insides I learned this from the creator
Excessive is always cool. Always.
Ooohhhh... this needs to go on a Caliburn!
Pretty cool.
374 is not bad all things considered.
Chris Scaramanga Cartaya yeah
"The Balance is shifting!" lol
If you prime the blaster, then load a dart from the front and push it with a ramrod, does it fire as expected? I had a vacuum loading issue on my ls with similar symptoms to yours. Cutting slots into the pusher fixed the issue.
You, sir, have created a monster.
Oh you'll see it's final form soon, no worries.
@@WalcomS7 Ok now I'm really scared.
I wish Ezekiel would collab with Worker or another nerf modding company to get this thing properly mass produced.
Wait list is around a year and this seems to be the only video other than his showcasing it.
what about covering the auto priming portion with plastic?
I know what people have said about the locks on Stryfes, but something like that would be useful here.
It’s literally a kit that turns your longshot into a stampede
That is awesome!
I would love a version of this for the Caliburn
Someone needs to make a stock cover kit for it that covers the dangerous bits
What kind of darts are you trying to fire through it?
Here you are working on a SubDolphin Machinegun, while I work on a piddly Megashark...
oof
Is that a Terraria reference because I think that's a Terraria reference
Stick this on a Worker Terminator with a 20KG spring?
Walcom, are you still using the worker 18kg longshot spring? Because if you are, that plus the extended monkeemods barrel will be why it's not shooting well. It's a terrible spring and that'll be too much barrel for it.
The stampedes big brother
Dude...walcom...im so jealous of your apparent hobby budget. Multiple caliburns, metal internal kits, talonclaw this monstrosity, an entire garage of some type dedicated to various nerf relates paraphernalia ....is your hobby budget just a rain dish to catch the funds that are showered upon you?
I'm really bad with money and lots of it is stuff companies send me.
That is awesome I want one
Yikes, there's some beefy motors and stuff going on for this to be able to prime something with a spring that stiff. Incredibly impressive though.
*EIR would like to know your location*
Eir is a stampede, my dude. Shes already full auto
i would honestly end up putting shields over the moving parts; maybe aluminum or something. that way it wouldn't catch on clothes or hair or whatever else there is.
Gonna make a Nerf saiga 12. Just gotta figure out semi auto without using gas and this thing should be perfect
Some say they can outsmart me.. Maybe, Maybe... but i'm yet to see man outsmart a dart.
now all walcom has to do it is bring this to and airsoft arena
Full frontal! This longshot primes at 3 times normal speed!
You should make a cage for it. (Idk like 3d printed or just cut plastic) so it's more rugged and actually useable.
Cage for the stock?
@@WalcomS7 yeah but I saw your comment after writing mine, exited to see the final product
Bruh noice stampede
Hey Walcom.
Could you design/3d print/and or kitbash shells to cover the priming arms to prevent/lessen the danger of having exposed moving parts?
People are already doing it.
Beautifull
Semi auto stampede
Are you gonna print some internal shell reinforcements for your longshot?
It’s beautiful...
Would a motor like that in a flywheel blaster be a bad idea?
I want to see a gas-piston operated one usin 12g CO2