3rd Gen Toyota Tacoma Aftermarket Headlight Install Anzo USA
HTML-код
- Опубликовано: 6 сен 2024
- Any tampering or modification to vehicles is not advised and should be left to professionals. The proprietor of this video is not liable for any damage or injury incurred from attempting events displayed in this video. The proprietor is also in no way affiliated with any of the products or companies displayed in this video. Following the steps in this video is not a guarantee of a certain result.
It’s not like your pulling the engine out, but it’s still a fair amount of work to get the headlights out. Would be a great idea to test that everything works before buttoning it all up.
Thanks for the video. Definitely considering these for my SR5.
hey how did you get the drl to stay amber like that?
Did you ever figure that out? I’m having the same issue
Are the DRLs orange, if not what mode do you have to be in to keep it orange like that
I think before I snugged everything down, I would check to make sure the lights are all working properly. I'd hate to have to take everything apart again if they don't work.
Can the amber lights also be used as DRL or do they work only when signaling?
They look pretty awesome 👏 I thought about going with this brand primarily cause the great price,but i couldn’t find a customer installed video like yours, I decided to go with the morimoto xb very pricey!, but they are amazing!!! But like I said these anzo looks marvelous and cheaper 👍 great video thanks 😊
Thanks for watching! The morimoto xb headlights look incredible, can’t go wrong with that brand!
Just found your video. How well have these aftermarket lights held up? Would you recommend? Thanks
Nice lights and good install reference
Thank you! Glad this video could be of help
Just ordered mine! Looks really good!
I’m gonna custom install a Baja designs s1 pod to replace the high beam 🤙😎
I’ll make a video (if it comes out good )
😂
Please do man!! Very curious to see how it comes out!
Are those halogens replaceable w an LED bulb?
Ya they are I have the same headlights and ordered led bulbs off Amazon and they’re a very tight fit but they do work
@@simonlangley556which bulbs did you get?
Hey man, it’s just mine or the DRLs are not that bright during a sunny day? Just curious
Wow! All that work and you really didn’t show the operation of the lights no signal no high beams.
How are they holding up? Especially driving at night? I want to buy but would like to hear your thoughts. Thanks for this video! Liked and subscribed!
Thank you! The lights themselves are working great, definitely brighter at night than the factory halogen lights. The housing themselves though are delaminating on top where the sun beats down on them which is disappointing. Without the protective layer, I'm assuming they will turn yellow sooner or later. I may try to re-clear them but we will see!
Would these work on my SR 2022 model? And if so would I need anything to go from halogen to Led? My truck does not have led DRL right now. Anyone can tell me would be great looking everywhere but can’t find the answer.
Aka I have just halogen everything. I want to swap to have a LED DRL and also have LED high and low beams. Thanks!!
These should absolutely work on your SR, these were designed to be a direct swap for the SR and SR5 models that come with halogens.
Nice looking truck
Thank you!
At 6:10, do the factory plugs go back in only one way?
Does anyone have the part # of the 2 10mm bolts that holds the headlight in place ? Thank you
Tengo una pregunta yo tengo Tacoma 2021 y le puse las mismas luces me las conectaron mal alguna recomendación o al fin electtro mecánico en Philadelphia que me recomiende
Can you make a review on the maxtrac spindles?
Do you have video on installing your fog lights?
ruclips.net/video/oxxxXT5fHN8/видео.html
Here you go!
Someone is selling me the high model ones is there a way to re.wire to work with SR-SR5??
How did you get the DRLs to stay amber?
What size life and tires do you have?
Hey man looking to get these lights looks like this video was put up almost a year ago…. How is the fit and finish holding up? Are they still working good? Any issues now that you have had them installed for a few months ? Just wanted to get your opinion cuz I’m looking to get a set of headlights for my TRD SPORT
Hey Drew, it’s been a little over a year and they still look brand new. Very pleased with the fit and finish, the only issue I have is that they get kind of misted up on the inside of the clear part of the housing when it rains sometimes. So moisture is getting there but it goes away almost immediately. I should have ran some silicone over where the front of the housing is joined to the back before I installed them but oh well. Otherwise it’s better output than I had stock and there’s no haze or fog developing on the headlight lens.
Can you run amber for your DRL,s?
Do these fit a 2019 SR?
They should! They are for non LED equipped Tacomas. So should be all SR and SR5 models
Does it work with auto high beam as well?
You know what, that’s a great question! I’m not sure yet
Does the auto still work? Any hyper flash? Which one is the DRL?
Auto still works! No hyper flash and the DRL is the amber setting
How are they holding up a year in?
Great, really pleased especially given the price point compared to the other aftermarket brands. Just left a more in depth write up on Drew’s comment.
Do the headlights have the option to use an amber DRL instead of white? I saw they were amber for a moment in the video, how did you make the color change?
Hi there! When just the DRLs are on, they are entirely amber!
Not very bright DRL , just installed on my Tacoma 😂
What’s the link the the headlights?
www.carid.com/anzo/black-switchback-led-u-bar-projector-headlights-mpn-111396.html
This is where the original buyer got them from