Snap Hoop Monster Tutorial
HTML-код
- Опубликовано: 18 сен 2024
- Happy National Embroidery Month! For her monthly Stitch Along, Eileen Roche teaches the ins and outs of using her Snap Hoop Monster magnetic hoop for machine embroidery.
#sewdimesewbabylock #embroiderymonthstitchalong #designsinmachineembroidery #snaphoopmonster #magnetichoops
I love my snap hoop monsters. Dime is my go to source for embroidery solutions. Thanks Eileen and everyone at Dime. ❤
I just received my monster hoop and I'm really pleased with using it...I've been able to leave it on the machine and simply move my quilt...very easy.
The one thing that I was not happy about it that the measurement tape around the hoop is something you have to put on yourself. It is very difficult to get them to match across from each other. This measurement is very important especially for perfect placement when using the IQ Designer. I would like to suggest that they be installed before shipping or at the very least, the center points be marked on each side. By the time I figured it out, I tore one of the tapes while repositioning it. There are a couple of other stickers, with no instructions for their use.
Otherwise, I think this is a great product and I'll be making good use of it. Thank you.
Hi Ann! Thank you for your feedback!
@@dzgns I agree with Ann. The tape measure that comes with the hoop should be installed on the hoop prior to shipping. The cross hair files available on the DIME website only has files that cover hoops up to 6" x 10". I ordered and received the DIME Monster 150mm x 400mm (5.906" x 15.748") for my Bernina 880. Although my machine has built into it a choice of selecting the Mega Hoop 150 x 400, it does not recognize the DIME hoop of the same size. The Maga Hoop sewing area is smaller than the DIME magnetic hoop even though the hoops are the same size. I will not be able to use a design with a sewing area larger than what the Mega hoop can embroider which defeats the purpose of purchasing the Monster.
Also, the Monster came with stickers with no indication as to what they are for. DIME needs to add more instructions with their product. In addition, it would be helpful to redesign the hoop with a lever for separating the two hoop pieces easier.
Thank you so much for this video. I just received my 7x12 Dime magnetic hoop for my Brother Dreamweaver Innov XE (sew/emb) 6200D machine. I hope to have lots of great embroideries with it.
I purchased a monster hoop about a month ago & I am actually a bit nervous to try it ! I'm brand new to embroidery (if you hadn't guessed!! LOL)
Hi Linda, how's your day going with you?
I enjoy mine luv it
are they good just for loose quilting designs (how i see them used most often) or can they be used for more densely digitized purchased designs? i have a hard time thinking the fabric would remain aligned for high stitch counts or even for thin fabrics-- like calico or WSS and FSL
I purchased two Monster hoops for quilting in the hoop. HORRIBLE experience. The top slides off of the quilt sandwich when the arm moves. They're totally useless and my sewing shop insisted that these would work for my purpose.
Hi, I am new to machine embroidery and I love it. I have a Janome MC550E which I just adore but I’m plagued with puckering. I’ve done all sorts of stabiliser combinations to no avail. Does this cut down the incidence of puckering? (Fingers crossed)
Thanks for the tutorial! Should the hoop have a lot of movement in the part that attaches to the embroidery unit? The metal moves a fair bit.
When I try to use them for quilting, the top completely comes off. Useless.
Has anyone tried their 4x4 one on a brother machine, it says on amazon that it works on LB5000 but some reviews said it didn’t work for their machine that was listed so im worried
I purchased one of these hoops for my Baby Lock Ellure Plus. According to the box I have the one that should fit my machine. But when I try to install it, it just will not snap in place. It continues to be loose. i have measured the little hooks where it snaps in and all seems right, I just cannot get it to snap in. I don't want to hurt my machine. What do I need to do?
Can I use this magnetic hoop with my Janome MC550E embroidery machine.
I was about to ask the same thing. It’s an expensive mistake to make if you buy it and find it doesnt
How do you set up the ruler tape on the hoop? No instructions included.
Hi Ann! You can find instructions on this blog post: dzgns.com/blog/2020/01/finish-those-quilt-tops-live/
Subscribe to our blog for more tips and tricks! Thank you.
Is there a monster hoop for the Janome 500e
Hi Linda, how's your day going with you?
Can I use this hoop to quilt on a Babylock Ellegante? what size hoop do I need?
Will this hoop work only on the Solaris? I have the Ellisimo Gold 2, would it be compatible with it?
Kindly what’s the machine name and which machine you recommend for me to buy?
I have a Baby Lock Esante, is there a Snap Hoop Monster to fit my machine?
Do you supply extra magnet hoop for your older snap hoop that I had purchase years ago
Hi Tina! Magnetic tops are not sold separately.
What magnetic hoop will fit my Bernina 570qee?
Will my Viking Ruby Royale embroidery machine recognize the hoop when I load the hoop on my machine?
Hi Faith! All machine compatibility questions can be answered here: www.shop.dzgns.com/pages/machine-compatibility-chart?_pos=1&_sid=6cf658377&_ss=r
I bought a monster hoop a while back but my PR1000 does not recognize the size of my hoop. What do I need to to do a large design? Vilma
Hi Vilma! Please contact our customer service reps Nicolette or Joanna Toll-free at 888-739-0555 and they'll be happy to identify this problem and walk you through a solution!
Thank you,
~DIME
Thank you informative
Can this be used on husqvarna?
Do you have the snap hoop monster for the Janome 10000 embroidery machine? I know it is old, but it is a great machine.
Hi Judy, how's your day going with you?
Eileen, I purchased a monster snap hoop to use with my Bernina 830 embroidery machine. I have attached the hoop to the embroidery unit and have selected a design to embroider. However, the machine does not recognize the monster hoop, it chooses instead the Bernina Jumbo hoop. Is there something I need to do so that the machine recognizes the Monster Hoop. I will be really bummed it I can't figure this out. I have some of your other hoops and haven't had a problem with them. Thank you for any advice you can give me.
Judy Rikansrud
Most likely, there is a small (very small) adjustment that you can make on the hoop. The bottom frame is made up of three parts: the metal frame, an aluminum rail and the attachment with movable tabs).
Hold the bottom frame in one hand and pinch the tabs on the attachment with your other hand. While pinching the tabs, slide the attachment back and forth so you can become familiar with the movement of the attachment. Release the tabs when you hear it lock in place on the rail. Once locked in place, place the hoop on a flat work surface and hoop the fabric.
When attaching the hoop to the machine, DO NOT let the attachment move on the rail. Just pinch the tabs to slip the hoop into place on the pantograph (embroidery unit).
~Eileen
Eileen, I just read your comment on this. Should my Bernina 770 recognize this on its own as a non-Bernina hoop?
Good day!My Brohter embroidery Innovice V3 SE. Standard hoops are 8" *12" . Will Snap Hoop Monster size 8" *12" fit my embroidery ? Will I be able to whip up big sandwiches on them?Thanks
Hi there! All machine compatibility questions can be answered here: www.shop.dzgns.com/pages/machine-compatibility-chart?_pos=1&_sid=6cf658377&_ss=r
@@dzgns My DreamCreator XE/Innovis VM5100 has an upgrade to 8" hoops. I did not see anything about using an 8x12 hoop with it. Thanks
It says I have to go to the web site to get the crosshairs design, why can’t you tell me
You can download the crosshair designs here - www.dzgns.com/downloads/
I purchased the 5x7 hoop from Amazon. It did not come with the adhesive strips that go on the hoop. How do I get these?
Hi Barbara! Please contact our customer service reps Nicolette or Joanna Toll-free at 888-739-0555 and they'll be happy to answer any of your questions. Thank you!
Will this work in the flourish 2?
Can I use the snap hoop on the jenome500E
Is there a monster hoop for Essnta banylock?
Will this work with my Quattro 2 6700d?
Hi Susan, how's your day going with you?
Can you share any tips on attaching the hoop to the PE 800? I love the hoop but have a HORRIBLE time attaching it which then makes me not want to use it.
Beth,
Please give us a call at 888-739-0555. We will be happy to assist.
Hi Beth, how's your day going with you?
can I use this hoop for kids tee shirts?
Hi Janet, how's your day going with you?
Please can you do more videos on the use of the monster snap hoop
We are definitely working on some great things for you all! We appreciate your feedback, more content is on the way!
When will you develop a larger hoop where I can use the largest version of Amelie Scott designs?
Hi there! All machine compatibility and hoop size questions can be answered here: www.shop.dzgns.com/pages/machine-compatibility-chart?
If you have more questions please reach out to our customer service reps Nicolette or Joanna Toll-free at 888-739-0555 and they'll be happy to answer any of your questions. Thank you!
Will this hoop interfere with a pacemaker? How strong is the magnetic field.
Emma,
Please give us a call at 888-739-0555. We will be happy to assist.
Do these work on the brother 1050x 10 need,e machine
Hi Lesley, how's your day going with you?
Thanks for the thumbs up, how are you spending your spare time?
Do you supply in the uk?
Hi Jules!
We sure do, we ship worldwide.
Can the Monster Hoop be used on a Janome 500E?
Hi Robin! All machine compatibility questions can be answered here: www.shop.dzgns.com/pages/machine-compatibility-chart?_pos=1&_sid=6cf658377&_ss=r
How would u hoop a t-shirt with that.
Can't Hear you
I am sure Magnetic hoop is very nice But it will clean your software and you will be without design
will this fit my Viking Designer Diamond Deluxe embroidery machine
Hi Lin! All machine compatibility questions can be answered here: www.shop.dzgns.com/pages/machine-compatibility-chart?_pos=1&_sid=6cf658377&_ss=r