Clutch Alignment How To / How To Use a Clutch Alignment Tool | Tech Tip 12
HTML-код
- Опубликовано: 26 авг 2024
- Aligning a Clutch - a simple but crucial part of fitting any manual gearbox. Getting it wrong is going to make installing the gearbox difficult/impossible. So get it right first time with the use of a simple alignment tool. Here's how.
The Engine in this video is a Modified 2.0 Pinto (SOHC) Engine out of my 1978 Ford Capri. For more Information, Tech, & Maintenance Tips on this classic 4 - banger, check out this playlist: • Ford Pinto (SOHC) Engi...
🔴 Subscribe for more free Tech Tips: www.youtube.co...
![Tee Grizzley - Detroit (Feat. 42 Dugg) [Official Video]](http://i.ytimg.com/vi/aeKfTtt0x14/mqdefault.jpg)
Twin Weber DCOEs your thing? Check out my video on how to balance & tune these fantastic carbs:
ruclips.net/video/FoUOcPYqDmU/видео.html
Great video, to the point and well spoken. thanks !
Thanks. A plain and simple explanation.
thanks for the video...have to do clutch jobs in level 2 at my college so glad i know this now very helpful video!
no problem! You're already more qualified than me :)
How did you get your torque wrench to warp instantly to the next bolt which is immediately torqued up? That would be well handy to know.
I'll let you in on a little secret..
Premier Pro
Major Tom? As in THE Major Tom from Laser Page all them moons ago?
@@FastRust Indeed!
@@FastRust Who were you on there?
jimmyted. You still got the Capri? Last I saw you'd done a bit of a resto on it
Thank you.
Great Vid !!!
Great video, thank you.
Thanks mate 👍🏻
Heh... engine hoists.... in the old days... we used to hold the engine with one arm and put the bolts in with the free arm... ahh... todays kids..... don't know how easy they got it...
my neighbour says just the same! Way I look at it, rather a broken hoist than a broken back :)
Jason King ha that’s why all historic motor trade workers have hernias!!
Make of tool tool thanks
No idea. Was given to me years ago. Pretty generic design have a look on ebay?
So wat happens if u fit cluch plate ring way round I have a problem basically fitted new cluch new slave and pressure plate right my cluch has been blended a few times but when I place my foot on cluch as rested on ther everytime I accelerate the cluch moves up 3mm and same when i let got off acceleration it moves down about 3mm the car drives fine but i no thers something ring can u please help
Where can I buy that tool?
Porque no entra la caja de cambios del Peugeot 405
Does that alignment tool fit any car or does it have to be specifically for your car
It will fit a lot of cars because you have options when it comes to dowel sizes. Will it fit every car under the sun? Probably not.
Great video my friend, save me some time for sure
Thanks 👍
Fast Rust -
I am replacing the Clutch on my 03 Dodge Neon SX2.0 and I was jw about the alignment with a "Pre Assembled Clutch" how do I go about without hanging it wrong?
I ordered the Alignment tool (it's in tomo)
But being pre assembled I am not 100%
Not sure myself! Maybe it becomes pre-aligned so you don't need a tool at all. Just bolt up and go. That would be my guess.
What if the clutch fixed without alignment
I used the alignment tool on Toyota 1GR engine. The pressure plate fingers look off center to the center of the clutch disc. Is this normal? I’m pretty sure I inserted the alignment tool all the way and got the dowel pins lined up. I even marked the flywheel and pressure plate before disassembly.
It's sometimes hard to tell eyeballing it. Unless you get your eye dead in line it looks off. I replaced a Yaris clutch last weekend and had to use a sharpie pen for an alignment tool. When I removed it I thought it looked slightly off. Gearbox went in like butter. If you used the right size tool and the pressure plate located on the dowels. I can't see it being off.
Where was this video 24 hours ago? I should have done more research.. I rebuilt my engine but didn't do anything with the clutch - including align it. I just bolted the fly and pressure plate, torqued, and have spent 24 hours trying to get the engine mated before I realized this. I also got debris from the driveshaft retaining clip *in* the transmission and subsequently "destroyed" the gearbox trying to remove what I thought was a cover. A ring came out, a bolt was left in - something to do with reverse I think, it's a mess.
Sorry to here this. Happens to us all, just a part of the learning process. At least that's what I tell myself when I drop a clanger - which happens fairly often! Try not to beat yourself up too much.
fast rust where you get that tool
+Isidro Garza You'll find them in your local motorfactors. If not, eBay is your friend. Assuming you mean the alignment tool, that is.
I'm using a plastic one. By the way, don't use plastic ones, they're utterly shite. The metal one looks great!!
if you dont align it, will that cause 3rd gear to bite?
Nah. If you managed to get the box in with it slightly mis aligned, as soon as you step on the clutch for the first time it would have centred itself. Sounds gearbox related. Synchro maybe?
Fast Rust thanks for the reply, when im in first gear and i let go of the gas it start grinding, when i try to put it in 3rd with clutch it wont let me, but if i use no clutch it will go in?
Was the gearbox fine before you changed clutch?
Fast Rust im not sure, the guy i bought the car from said he change the clutch and that they probably put in the clutch wrong in, and that all it needs is an alignment
There's a lot of unknowns so it's difficult to say. As for clutch installation, it is possible to put the friction plate in the wrong way, it's possible to incorrectly install the release bearing, or not install it at all - which I have seen! Then if it's cable operated you need to adjust that, usually at the bellhousing. Hydraulic clutch usually adjust at the pedal end. Alignment is purely to install the gearbox, so I can't see this being your issue.
this is gangsta video bhur ba
Ha ha. Welcome.
Fair play mate! Check out my video with my homemade tool
3/8 extension bar and various amounts of insulation tape wrapped here and there!!!
I still don't get why the designers don't bolt the clutch to the transmission instead of the engine.
The assembly needs to rotate with the engine otherwise it's all a bit pointless 👍
@@FastRust But cant the clutch spin in the transmission housing by the axle coming from the engine?
Pressure plates being attached to the engine or the transmission shouldn't make a difference right?
Oh I see what you mean, have the friction plate spin all the time with the engine and the pressure plate stationary on the gearbox side. Kind of the opposite way round. Flywheel would have to be on gearbox side as well.. that might be the issue. Too much inertia on the gearbox side maybe? Theory makes sense though.