Samsung Moldy Dirty Linty Washer maintenance tips.
HTML-код
- Опубликовано: 1 окт 2024
- Are you noticing build up on your clothes after a wash? Is your washer smelly? Here are some quick tips to prevent that.
#SamsungWasher
#SamsungMold
#SamsungFilter
#WasherCleaning
#DIY
Good video but just 2 easy steps dragged over 13 minutes
I have a 3 yr old Samsung. Worst purchase I ever made. Should have kept and fixed my 15yr old whirlpool. This thing stinks and doesn't clean clothes.
Yeah you're not wrong. There are several design flaws in these Samsung washer/dryers. Aside from mold, lint, they also have a problem with dissimilar metals under the wash basket and behind the dryer drum so they corrode. It'll be my last Samsung washer/dryer.
😊
Excellent video. Thank you so much for being generous with your time and showing it. One other filter is important. The inlet valves behind the washer have a screen in them. Remove the water hoses and put a wet/dry vacuum hose up to each inlet valve to suck out and particles trapped by the screens. The machine will let you know that they are blocked by a code and your manual will explain that code.
For a Dryer lint trap tip, remove the lint trap, attache a small hose to that wet-dry vac that will reach down into the trap cavity and suck out the lint that's stuck all over it. Now here is the best part but with a disclaimer. Do at your own risk. Caution needed so that your not injured with the drum turning, but you shouldn't be. Do not do this with children watching. With the door open, push in the door safety and secure it with tape etc. Get a strong air compressor with an air gun and that small hose that you used.earlier. With the door safety switch secured, turn on the dryer to "air only setting" and with the compressor running and using the air gun and small hose, blow down into the lint cavity towards the impeller fan all that clinging lint. This will clear all of the lint out of the lint cavity and thru the exhaust hose to the outside because it's being sucked out by the impeller fan. Keep that small hose away from the impellar fan as well as your fingers. Remember, DO AT YOUR OWN RISK!
I have seen a video of a guy disconnecting the dryer vent hose from behind the dryer and using a leaf blower to blow out all the stuck lint that's in it to the outside. I have yet to try that, but it looks feasible. I would think that propping open the outside vent's louvers or cover will be more helpful.
Exactly the same situation here. My Samsung washer is giving me many problems at 3 years old. My 15 year old whirlpool got my clothes a lot cleaner.
My 7 year Maytag impeller was impossible to remove without destroying it. Yeah , all the brands mold and dirt in places you see. You have to clean them regularly. I found the Samsung impellers were the easiest to remove without getting fused to the drive shaft.
Putting the bolt half way back on was a brilliant move! Thanks very much.
You just talked a lot just show us how to clean the machine
Me looking for my husband’s tool box so I can do this!!! 😅 could you show how to put it back together pls
Another tip for mold or smell not to build up is after done washing leave lif open for few minutes.
I about tore my washer apart trying to get the middle piece out. Thank you so much for keeping real and simple!!!
Man you are a life saver and omg...there is so much crap in there....under than metal plate I stuck my fingers under and just has so much gunk.... 😂
Is their a drain filter on top load Samsung washer? We have to clean timely ?
NOV 2023, thank you for this video it was the only one that helped me to remove the agitator. Excellent!
Glad it helped!
Hey there, really love the video. You are the only person that has explained it and actually gave right information now I just got this exact washer. Used and clearly they did not clean this at all and I just found out from watching videos before I got to yours and then I got to yours and I was like oh my gosh this is the best one yet. Well, I’m having an issue with the first bolt to clean inside it’s not coming loose at all. I may be doing something wrong. I actually recently became a single mother with the last couple days my husband, you know I would like to call him for help but we’re not speaking right now, but that’s on another note if anyone or yourself can give me any tips or tools, I could be the wrong ones but I do believe I have some more to the ones that you’re actually using in the video. I feel like I’m turning the same way you are, but it’s not coming loose at all. It’s very hard to turn left or right, please help me as soon as possible. I’m trying to clean this As I’m typing this comment. Thank you and hope to receive some feed back very soon
Thank you for the video!! I've had residue appear on the clothes after the wash cycle and couldn't figure out how to clean it. I ran several self-clean cycles but that did not work, so I'll definitely try your technique.
Man this is crazy. I've followed everyone's steps and mine refuse to come off. I took the bolt completely out and put back in just a bit. Nothing. Won't budge. Must be some serious buildup.
Excellent video, for the exact model of top-loading Samsung I own. My machine has been depositing black "spots" of frime on clean, light colored clothes coming out of the wash. When you go to scrape them off them smudge into the fabrics and make the staining WORSE! So the first clue is that these "clots" seem to be deposited on the clothes/sheets in the rinse cycle, and after all clothing is removed after the wash cycle ends, I find more of them all over the bottom of the tub. So obviously the drum is riddled with this sludge, and pieces of it break off into the wash/rinse water during the cycles, making clean clothes dirty. So I will be tackling this following your steps in taking it apart to get under the metal surfaces to scrub.
Thanks so much, all the other videos are showing the wrong way to remove the drum. This really works
47 yr old mom of 2. I’m still paying off this washer and dryer. I can tell you that my machine kept forcing a cleaning cycle after washing blankets. I knew something wasn’t right. I followed these easy steps and now it’s working perfect. I use powder detergent that is supposedly safe for these machines and there was build up in there for sure. I did read I should use a cup of bleach and run the cleaning cycle. I wasn’t doing that but I will going forward. Good tip with the screw btw came up so easily unlike my last machine.
When I try to remove that 10mm center bolt, the entire tub rotates freely and I have no resistance to push against. How did yours com off so easily without the tub rotating? Is there a brake setting on the washer?
Thanks because the self-clean 0is not getting rid of the musty clothes smell.
Thanks mate , can you lube the the tub bearing from there once it’s out .. bit of lanolin spray or something similar
I just cleaned mine out. This only gets about 10% of gross mold stuff, you must take the drum out to see the other 90% and the total disgusting nature of the the samsung beast. It only takes another 15 minutes to disassemble, but a while to clean it to the bare bones. This is a quick maintenance though to at least get some of it.
You are right. Poorly designed machine but you have to pull everything out to clean it all
Thank you , for all the details how to clean 👏👏👏👏
The mold doesn't entirely build up UNDER the agitator as mentioned at 7:00.... it's in between the silver/white portions of the agitator and is otherwise impossible to get out. Love that bacteria on my clothes! Very poor design.
you put your clothes away straight out of the washer lol?
mold is fungi not bacteria btw but either way a 50 min cycle in a dryer on medium or high heat will kill it.
You are right. Unless you totally pull the drum out you can’t get all the mold and lint out. Very poorly designed machine
Yes. You’re correct. I just figured that out after cleaning it several times so I’m replacing the entire agitator. It’s almost impossible to pull it apart to clean
Thanks for the tip to thread the bolt back in to make removing the bottom easier. Worked like a charm.
Thank you. I was having a little trouble with that bolt at the bottom of the machine. Once I remove the cap which actually one of those plastic clips broke off. when I called Samsung they wanted $56 plus the shipping fee through FedEx cause that’s the only way they ship it which I thought was ridiculous for a plastic cap. Found it on Amazon for $11 now that you’ve showed me how to clean that dirty smell out of the washer. I appreciate it very much. I was quoted by Samsung a 250 to 350 to come out and work on it. I’m a do it yourself Guy and I really don’t like getting ripped off. Thanks again.
Do you mind sharing the link of the Amazon cap so I can purchase me one also when mine was gave to me it was missing thank you so much
I am a 67year old woman who find it hard to follow and clean my lint trap on my Samsung top loader washing machine don't even know where it is 😢
Help
I have a top load Samsung washer and mine is dripping water inside the tub . The washer will be off and no clothes in it . Please can you help....
@yolandamoring2349 replace the inlet valve
Thank you for this great tip. I inherited this machine with the house I bought and one just doesn't know the maintenance history on appliances. Thanks again.
Well, this explains a lot. Thank You.
Any comments on running a clean cycle with the agitator disc out? Then cleaning the disc and re installing?
Can’t seem to lift it even with the bolt half way in 😢
I tried the bolt trick and it didn’t work 😩 Any other tips on how to remove the cover?
Same
Ok so how do u clean the part u took out ?
Any videos on how to separate the aluminum top and the white plastic to clean in between?
Would be awesome!
I started trying to separate it and gave up…way too tedious. I bought a replacement that’s only the white assembly washplate lower without the stainless upper piece attached (name on Samsung parts site) for $125. Been using it about 6 months with no difference in performance. At least takes care of the mold that forms between these 2 pieces. I still have to take it off to clean the spider flange every few months. Ridiculous
This was very good video. Thank you! My problem has been like sand and particles but it seems to be coming from the inner top around the rim. Do you know anything about that?
Same here... you fix
Had mine for 8 years no problems my maytag didnt last 3 years 😊
Thank you very much for your tips on how to clean the washing machine inside mold build up easy to understand. Now I know how to remove the agitator too. You are awesome!!
Great video! Thanks for the help
Thank you so much for your video!
Don’t use liquid fabric softener it doesn’t break down and will build & cake up under the agitator..use sheets in the dryer instead …Trust Me
Mannnn you are the realist!!! You are the real MVP!!! Thanks
My pulsator is significantly stuck to the drive shaft!!! Can I use WD-40 or olive oil or similar to get it loose? I've tapped and pried... Obviously, I don't want to introduce clothes staining, but cannot get it out (without damaging the pulsator, I fear).
Did this yesterday, so easy! For a mom like me rhat likes to get in all the nooks and crannies I was relieved when I was able to do this and saw minimum build up. I keep the lid open although my husband hates it. Use minimum detergent and always use vinegar, baking soda and borax in my washes. I self clean with all 3 and add citric acid, I do this for my dishwasher too.
I did exactly what you said and still have the issue. I am thinking Is the clunk in between the aluminum agitator and the plastic attachment. 😭 I self cleaned and drop some bleach. Next wash will be heavy duty with bleach.
I run my Samsu😮ng washer on self clean cycle with a afresh tablet, I fill the tub all the way up with hot water with a bucket it worked to remove odor
My drum spins when trying to get the bolt out. Any tips?
same issue. Did you get the bolt out? If so please HOW?
My husband and I did this today. Omg!!! So disgusting. Wish there was a way to clean between the plastic and metal agitators.
It has a self clean i find works well. I havent taken the bottom off but i add capful of white vinegar in the clean cycle or with my clothes.
I wash the barrel
Good video.
Not a very good design.
You're not wrong 😂
Didn’t know this… had it for 7 years… wish me luck 😷 🤢
Thanks! Been trying to figure this top loader out. Best video I’ve seen by far.
Thanks. Exactly what i was looking for!! 👍
A big thank you, especially the bolt trick😊
Made my life easier, opened up my Top Load Samsung Washer in Minutes
After taking the screw out I couldn’t get the lid off
best idea yet to get it out
Hi, my machine does not wash the clothes, is an automatic washing machine but is spinning
Do you know how to turn off that annoying ice cream music😂😂😂
It's a dame lay it don't just come off tried your way
Normal to have some water under that tub? I have the same samsung.
Man I have tried all the tips and tricks to try and get the agitator plate off my machine and it just wont budge! I have tried prying it off...and it just wont come! Any advice?!?
You did what I did at 6:30?
It's reserved thread. Set your electric screw driver as if you were tightening a bolt. Or turn it clockwise if you are manually doing it.
I'm with you, mine doesn't come out that way either
Are you sure this bolt has reverse threads? This would be the reason I can not get the bolt out.
Seems like everyone else is saying the opposite. They are saying normal threads, Counter clockwise to loosen. Thoughts anyone? Anyone?
on my Samsung activewash vrt my bolt is NOT reverse thread. I’ve got it removed. I had to hold the drum in place to get the bolt loose. Once I got the bolt out, the agitator isn’t budging. I tried the tip of putting the bolt Ina couple threads and pulling it and also tried some light prying and the agitator isn’t coming out. I’m afraid to use too much muscle and prying and break something off
Talking way too much..get to the info
Thank you, I’m about to do it right now and clean it! I’ve had mine for a bit over a year and never know I could do that!
Thank you for the video very helpfull
Can you load up a video on how to make the same model of the dryer not squeaking so loudly?
I’ve got a LG top loader and have had 2 massive dogs for years. I feel this thing just doesn’t wash well at all but outside of self cleaning etc I’ve never taken it apart. I’m worried now under the agitator is probably clogged with fur and disgusting mild. It drains with no issues and no error messages but i wonder if the net effect of the dirt is just the machine not cleaning… hmmmm
Same problem here with the hair issue and aggravated that it doesn't have a filter. If you have resolved the problem with your washer please lmk! Thanks ❤
@@stephenbraden6239 My wife is paranoid we wont get it back together lmao...its really annoying cause i wanna take pictures of how bad it is...and just makes me sick knowing this is our laundry lol.
@@choocharoo rent to own a new set is what my wife and I just decided bc we don't have the money in the bank to go buy them. You know that if she's not happy nobody is! Lol!
@@stephenbraden6239 lmao not wrong...ya I mean a set of last years products here in ontario is easily 900-1100 for anything worthwhile
We pulled the tub and agitator out and it was nasty. I’ll never use liquid softener again, either. We used a power washer the clean the outside of the tub. Who can do this every 8-10 months?
I want to do this but I can't reach the bottom I'm 5'0" 😅
Help
Can I run the machine without the top bolted back on to do a first rinse of the products I used?
I wouldn't just run it on hot cycle it drains through there anyways.
Much like your car there's a little book in there that's called the instructions, suggest reading them and it tells you all about cleaning your Samsung washer, there is a cleaning cycle that it has to go through every 20 washes and you can run bleach in there during this time, just saying.....
Cool, where is the setting in the instuction book that removes water that stands under the pulsator? Much like a car that is subject to recalls and technical service bulletins, the engineers can oft overlook certain things or design within what they deem to be 'acceptable'. While I do run the 'cleaning' cycle, it is not enough to keep up with the prolonged use and design flaws inherant of this unit and similar units. This post is meant to be supplemental to a very common report if you look into it. While I appreciate your feedback, I'd also challenge you that if you have this same unit, check under the pulsator and post a video comparing the condition within the same period of ownership. Which for me is now nearing 3-4 years.
I have the same if not similar model of washer machine and honestly the manual was trash, it was not helpful at all.
Heading: Cleaning the interior
Description: Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial residue that may remain in your washer as a result of washing clothes. Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent stains in your washer or laundry.
Hard water deposits may be removed as needed. Use cleaners labeled “Washer safe”.
Ummmm, it doesn’t say know HOW or WHERE to clean out the mold and such. My spouse and I took the whole drum out of the machine after watching a few videos of how to clean the machine. We cleaned off the gunk and even after, still, there was residue found on our clothes. I’ve resorted to adding vinegar to the loads to combat the mildew smell but so far no luck on the issue of gunk found on our clothes.
The manual doesn’t help at all
You got it. Poorly designed machine. Clean cycle does not get the bulk of the mold out of this thing. And really, who wants to be pulling the drum out of it as regular maintenance?
When the manual tells you to "Clean the magic filter" and mine doesn't have one... That doesn't help. The next issue, it ours has yet to complete a cleaning cycle without error near the end... even after manually cleaning it.
Hey I know this is an older video but maybe you’ll see this…. My center agitator is plastic and every time I try to turn the bolt the whole inside moves around with me. My model isn’t the steam one but otherwise looks just the same. Any tips? Thank you
On the model I have, the agitator has threads that the bolt screws into pretty freely, I think maybe you might have some corrosion in the threads portion of your agitator which is preventing you from cleanly threading the bolt, either that or the bolt is crossthreaded perhaps.. I'd say to unthread the bolt and try to thread it by hand while holding the agitator in place if that doesn't work, something is wrong with the bolt or the agitator.
@@zerializing thank you! I was able to finally get it stable enough to turn. Appreciate the quick response and the video made me confident enough to do it myself.
My drum spins when trying to get the bolt out. Any tips?
I held it down while I worked on removing the bolt
What is a little cap called over the agitator
Samsung lists it as the pulsator cap.
Will try this today
My drum spins when trying to get the bolt out. Any tips?
It's reserved thread. Set your electric screw driver as if you were tightening a bolt. Or turn it clockwise if you are manually doing it.
It is not reverse thread. Just hold the drum with one hand while you turn the bolt counterclockwise with the other hand.
Thanks it worked!
Thank you
Is it possible to still use the washing machine with a big hole in the plate? I left a knife in my pants and it broke it while it was cleaning
Technically speaking, I don't see why not. The agitator already has a bunch of holes in it lol.