I completed my first lower service today and it was all thanks to this video! My fork feels like butter now. Thanks for putting such easy to follow content out to help us. I hope you publish one for a full service next. T-50 hrs until I’ll need it. 😉 keep up the great work!
If I could like this more than once, I would. Just helped me out again. Thanks again. I'd love to see a full service video for the Onyx SC if you have the time!
Thank you for the video and I love my DVO suspension. It would be great to see a full service video on the Onyx. I just ordered all the parts and a little unsure on the bladder kit. Did not see it in the online guide. Also the Jade X Coil if you happen to get one in and have a chance to video. Such great products!
FYI for people that buy a 2022, late 2021 model.. Apply some heat before trying to do a travel change, DVO adds a lot of loctite and its super hard to take apart. Or be super strong if that is a option :D Amazing forks either way
i'm copying someone else request. It would be great to see a full-service video on the Onyx. I just ordered all the parts and a little unsure on the bladder kit. Also the Jade X Coil if you happen to get one in and have a chance to video. Such great products!
Thanks a bunch !. I have my onyx sitting here with some supergliss 100k I got really lucky to get.. cant way to change do a service while the winter chills are strong outside in canada !
Why does mine feel like it has lock out off the top when i leave the bike sitting and come back to it. Feel like a solid fork then it loosens up a bit. But always solid when i come back to it ?
Help... Just performed the service, as I've done countless times on other forks over the years- and immediately after assembly i noticed the rebound dial is stuck! Cant even turn it with a longer allen key inserted at the bottom. And i dont wanna apply too much force and snap it. Any advice?
Hi just want to say after watching both the how to remove lowers and the one on changing travel both videos were a good help only problem I had was removing the green nut inside the forks they used loctite Can you use Fox 20wt gold when putting the oil back in
I saw 2 times the video! front axle from DVO I think has compatiblity failure with dt hubs... I have Onyx SC with Dt swiss 350 hub and have same mark in my axle after a few rides stops squezing! maybe had do recall and fix that problem I think!!
Thank you! Could you make a video on how to prevent the OTT from turning? A known defect and one that I believe some have found a solution. Hoping you have
What torque nm should it be for the top cap and footnut? I've read 10nm for top cap and 10 and 15nm for footnut, but not sure about how accurate is it as I don't recall it stating on DVO manual.
Hi from uk bud, I’ve got got an onyx 29” arriving in the next few days it’s at 150mm so going to have to do a travel change, just want to check something with you if you have the time, on the dvo website it says 40cc in the lowers if 7.5w oil so would I change to 25cc if i use 10w? first time doing it all thanks to your videos! Cheers my friend have a good day
This is excellent, thanks! DVO doesn't have a service manual for my Diamond E3 yet. Would you know how close what you're doing on your Onyx is to my E3? I do have an email from them telling me how much oil to use on each side.
A video on tuning tips for an Onyx SC would be much appreciated. I am having trouble with harshness on small choppy bumps like braking bumps but it feels great on big single hits. I have been chasing my tail and don't know what direction to go. Also, any tips on fixing a self winding OTT? Mine ends up all the way in after a ride and really changes the feel of the fork.
Serviced my diamond a few times and sometimes my rebound knob has become really tight/ almost unturnable prior to the final torque of the foot nuts after service. What is going on and how can I prevent this?
Hi, just looking to buy new seals for my fork, seems like there are a few different sizes on the DVO website, just wondering how you would accurately figure out stanchion size?
Hey there, I pulled the lowers off and there's hardly any oil come out but alot of grease build up inside the lowers. Is this normal? Thanks so much and love your tutorials!!!
I just did the lower leg service on my Onyx and the air shaft side had a ton of grease on it, while the damper shaft had none. Same as you there was barely any oil coming out of the air shaft side, I think it was mostly grease with some oil. The damper side had a fair amount of oil. From this video and the service manual, they make no indication that any grease needs to be used on that area. I put in 25cc of oil in each leg and put it back together.
Cheers for the reminder! I can only find a 35/36 seal press. Which doesn’t make sense as they are two different diameters. What seal press do you suggest? This fork is too nice to use the plastic conduit fitting and a mallet
Great video, thanks. Did you depressurize the air chamber before removing the lowers, if so I missed it? Any need to pull the air chamber top cap and do any lube change in there?
To do a lowers service you don’t need to take the air out. If your doing anything with the OTT negative spring or Air top cap all the air needs to be out
So, this is a very good and detailed video, but I was wondering, would the one leg not have more oil in it than the other because there was oil in the syringe's tube? Pretty sure that isn't included in the volume measurement of the syringe, but I'm also not sure how much liquid the tube holds or if it is enough to make a difference. Would appreciate some thoughts.
Nice video,can you help me a bit? i own a D3 DIAMOND and i want to service lowers,i follow the same method with the footnut,full open rebound and then unscrew? THANKS A LOT
I have 20wt Fox Gold but it gets very gloopy around freezing temps (winter). Is Supergliss the way to go? Also saw Motorex 7.5 or 10wt. And I have Fox 5wt ptfe at hand...
Honestly of all the seals I’ve tested they are all very close so wouldn’t worry about it. Things like sizing bushings, Lubing air pistons or just doing your 50hr service intervals make way more difference
Super helpful. Mine is way overdue for this service and I wanted to do it but was not sure how. Great video!
I completed my first lower service today and it was all thanks to this video! My fork feels like butter now. Thanks for putting such easy to follow content out to help us. I hope you publish one for a full service next. T-50 hrs until I’ll need it. 😉 keep up the great work!
If I could like this more than once, I would. Just helped me out again. Thanks again. I'd love to see a full service video for the Onyx SC if you have the time!
I don't even own DVO suspension, yet . . . and I watched that. Super helpful.
Amazing video! Thanks for all the valuable information you provide.
Cheers!
What happens if you use a lighter or heavier oil?
Thank you for the video and I love my DVO suspension. It would be great to see a full service video on the Onyx. I just ordered all the parts and a little unsure on the bladder kit. Did not see it in the online guide.
Also the Jade X Coil if you happen to get one in and have a chance to video. Such great products!
Love to see this on the d3. My mechanic was confused how to remove the compressor screw
FYI for people that buy a 2022, late 2021 model..
Apply some heat before trying to do a travel change, DVO adds a lot of loctite and its super hard to take apart.
Or be super strong if that is a option :D
Amazing forks either way
Or buy the tool we make to have that seal head removed super easy 😂
i'm copying someone else request. It would be great to see a full-service video on the Onyx. I just ordered all the parts and a little unsure on the bladder kit.
Also the Jade X Coil if you happen to get one in and have a chance to video. Such great products!
Thank you very much for your explanation. Makes a Onyx service super easy.
Thanks a bunch !. I have my onyx sitting here with some supergliss 100k I got really lucky to get.. cant way to change do a service while the winter chills are strong outside in canada !
Nice one Jesse. Inspired me for some self sufficient behaviour!
Yeah and given the hours you do mate 😂
Odd that the manuals say to use 7.5w does it make much of a difference?
Love it, no bullshit splash screen intro or hype music, just the facts. Cheers mate.
I wouldn’t know how to do that crap even if I did think it was a good idea haha
Thanks for the very informative video, I think imma service my beryl forks now 🤙
Hello great video. Can you do a video on a Diamond D1 100hr service sometime?
You should do a service video guide for the new topaz!!!
Your vids are helpful! DVO reccomends 40cc each leg.
Why does mine feel like it has lock out off the top when i leave the bike sitting and come back to it. Feel like a solid fork then it loosens up a bit. But always solid when i come back to it ?
Would be nice to have links to the things you used in this video. Oil, service kit etc.
Help...
Just performed the service, as I've done countless times on other forks over the years- and immediately after assembly i noticed the rebound dial is stuck! Cant even turn it with a longer allen key inserted at the bottom. And i dont wanna apply too much force and snap it. Any advice?
What oil do I need for the onyx diamond. Iim only adding travel, if I carefullu take out the cartrige do I even need to add oil?
Hi just want to say after watching both the how to remove lowers and the one on changing travel both videos were a good help only problem I had was removing the green nut inside the forks they used loctite
Can you use Fox 20wt gold when putting the oil back in
soon I will change my fox 36 and dvo is on his way to being the favorite

🤘🏽
I saw 2 times the video!
front axle from DVO I think has compatiblity failure with dt hubs...
I have Onyx SC with Dt swiss 350 hub and have same mark in my axle after a few rides stops squezing!
maybe had do recall and fix that problem I think!!
Hi you state 10wt oil but I thought the Dvo service guide stated 7.5wt?
Either is fine. As are most alternatives like fox 30 gold or 68k supergliss. Our forks arnt as temperamental as other brands
Thank you! Could you make a video on how to prevent the OTT from turning? A known defect and one that I believe some have found a solution. Hoping you have
Not an issue we see in the forks we build sorry man so I’m not sure I can help
What torque nm should it be for the top cap and footnut?
I've read 10nm for top cap and 10 and 15nm for footnut, but not sure about how accurate is it as I don't recall it stating on DVO manual.
Hi from uk bud, I’ve got got an onyx 29” arriving in the next few days it’s at 150mm so going to have to do a travel change, just want to check something with you if you have the time, on the dvo website it says 40cc in the lowers if 7.5w oil so would I change to 25cc if i use 10w? first time doing it all thanks to your videos! Cheers my friend have a good day
Yeah mate just 25cc of 7.5 or 10wt is fine. Doesn’t need 40cc regardless of oil. Those instructions are a bit old
@@jessedvo4919 thanks for taking the time to reply and for your clarification 🤟🏻 take it easy bud
This is excellent, thanks! DVO doesn't have a service manual for my Diamond E3 yet. Would you know how close what you're doing on your Onyx is to my E3? I do have an email from them telling me how much oil to use on each side.
Great video and just what I needed. Is SRAM butter a fine alternative to the slickoleum? Thanks
It’s the same stuff haha
@@jessedvo4919 thanks Jesse. Love you guys
Great video, thanks
A video on tuning tips for an Onyx SC would be much appreciated. I am having trouble with harshness on small choppy bumps like braking bumps but it feels great on big single hits. I have been chasing my tail and don't know what direction to go.
Also, any tips on fixing a self winding OTT? Mine ends up all the way in after a ride and really changes the feel of the fork.
DVO gave me a plastic OTT locking cap to stop it from screwing itself in like you said, but it fell off after the first ride so....
did you get this sorted?
@@MrSupermugen I ended up drilling a hole through the adjuster cap so I can pin it where I want it.
@@bearded4glory809 is the onyx sc worth money or just go with the factory 36? i have both available
@@MrSupermugen Never rode a Fox 36 but I love the Onyx.
Serviced my diamond a few times and sometimes my rebound knob has become really tight/ almost unturnable prior to the final torque of the foot nuts after service. What is going on and how can I prevent this?
Yeah happens all the time, it’s not really a problem or anything. You just have to crack it back open and you are away laughing
Hi, just looking to buy new seals for my fork, seems like there are a few different sizes on the DVO website, just wondering how you would accurately figure out stanchion size?
Great video mate
Hey there, I pulled the lowers off and there's hardly any oil come out but alot of grease build up inside the lowers. Is this normal? Thanks so much and love your tutorials!!!
I just did the lower leg service on my Onyx and the air shaft side had a ton of grease on it, while the damper shaft had none. Same as you there was barely any oil coming out of the air shaft side, I think it was mostly grease with some oil. The damper side had a fair amount of oil. From this video and the service manual, they make no indication that any grease needs to be used on that area.
I put in 25cc of oil in each leg and put it back together.
Should I be using 7.5wt or 10wt oil? Service guides on DVO's site say 7.5. Any insight?
Excellent as always.
Can you make a quick video next time you do bushing resizing?
Yeah man too easy
@@jessedvo4919 would you, please, make as more as possible videos about DVO Jade X ?
Especially about shimstack, tunning, etc...
@@ka81alex yeah once I’m home mate
Yes please!
Cheers for the reminder! I can only find a 35/36 seal press. Which doesn’t make sense as they are two different diameters. What seal press do you suggest? This fork is too nice to use the plastic conduit fitting and a mallet
35 / 36 may be dual sided or have enough room to fit both sizes. So grab one of them and just send it
Great video, thanks. Did you depressurize the air chamber before removing the lowers, if so I missed it? Any need to pull the air chamber top cap and do any lube change in there?
To do a lowers service you don’t need to take the air out. If your doing anything with the OTT negative spring or Air top cap all the air needs to be out
So, this is a very good and detailed video, but I was wondering, would the one leg not have more oil in it than the other because there was oil in the syringe's tube? Pretty sure that isn't included in the volume measurement of the syringe, but I'm also not sure how much liquid the tube holds or if it is enough to make a difference. Would appreciate some thoughts.
Yeah that’s such a small amount that it won’t matter
@@jessedvo4919 Cool, thanks!
Can you give some information about the tool used to press in the seals. Is it the fox tool for diameter 36?
Any 36mm seal press tools will work in the onyx yip
How do your remove the 110x15mm axle if the nut comes off but axle remains in place??
Gently tap it out. Shouldn’t happen if your axle is well greased up.
nice video bro! loved it, just got 50hrs on my onyx sc, the service manual says 40cc per leg tho. (??)
The service manual is wrong 😂
@@jessedvo4919 srsly? 😭 What's the correct amount?
@@ignaciotorojimenez7042 25cc per side. Like I said in the vid 🤘🏽
Nice video,can you help me a bit? i own a D3 DIAMOND and i want to service lowers,i follow the same method with the footnut,full open rebound and then unscrew? THANKS A LOT
Yeah same method for lowers mate
do you have any full-service videos? DVO Diamond.
I’ll make one the next diamond we do. We sell maybe 1 diamond to every 10 onyx forks so it’s a bit rare for us but I’ll get it done for ya
Can you do a video on onyx dc?
For the lowers it’s the same process
@@jessedvo4919 Thanks
I have 20wt Fox Gold but it gets very gloopy around freezing temps (winter). Is Supergliss the way to go? Also saw Motorex 7.5 or 10wt. And I have Fox 5wt ptfe at hand...
If you are riding in freezing temps then I’d be going 7.5wt motorex for sure
When it’s better to use Wpl 20wt and when other weights? Good video btw
Depends a lot on temperature. Thicker oil is better when it’s hot all the time and thinner oil performance is better in the cold
Can you do a video on a diamond or onyx damper service at some point? I have a diamond
We don’t really do many diamonds but the next one I get in I will video for you. However it’s not super applicable as we vacuum bleed our fork dampers
@@jessedvo4919 awesome. Thanks!
Are the wiper seals as good as the SKF ones which claim to be low friction??
Honestly of all the seals I’ve tested they are all very close so wouldn’t worry about it. Things like sizing bushings, Lubing air pistons or just doing your 50hr service intervals make way more difference
Where did you get the silver bits from? Looks rad!
We made them
But do you sell them? 🧐
Can you use Maxima fork oil for the Onyx
Plush yes
Dont they specify not to use maxima on the manual? Or does the plush not contain the seal expanding chemicals?
Hi is the same process with Sapphire 34? Thanks:)
Yeah it is mate
Just let the first timers know let ya air out first before you begin 😁
You don’t need to let the air out to do a lowers service on DVO
@@jessedvo4919 well bugger me ya learn something every day, awesome thanxs
@daniel james you might be playing with a bomb if you choose to do that on a rear shock tho