Mastercam Mill 3D || Area Rough || Area Rest Rough || Stock Model || 3D Verify || Machining

Mastercam in this Video we show u
Surface Modeling in Mastercam for Mill 3D Surface High-Speed Tool paths
#Modeling
#Surface
#Mill 3D
#Surface High-Speed Tool Paths
👇🏼👉🏼 For Download Drawing & Model:- grabcad.com/li...
📌 For Join our Telegram Public Channel:- Mastercam Tutorial - Cipetian Educational Zone t.me/Mastercam...
👇🏼👉🏼
Mastercam for Beginners Tutorial in Hindi - All Commands in Detail: • Mastercam Basic Tutori...
👇🏼👉🏼
Mastercam CNC Lathe Operations Tutorial:
• Mastercam CNC Lathe Op...
👇🏼👉🏼
Mastercam CNC Lathe Practice Exercise Tutorial in Hindi:
• Mastercam CNC Lathe Ex...
👇🏼👉🏼
Mastercam Lathe - C & Y axis Tool Paths Practice Exercise in English: • Mastercam Lathe - C &...
👇🏼👉🏼
Mastercam CNC Milling 2D Operations Tutorial in Hindi - Tips & Tricks: • Mastercam Mill 2D Oper...
👉🏼👇🏼
Mastercam Mill (VMC) Tutorial For 2D Tool-path & Modeling Tutorial in Hindi : • Mastercam Mill 2D Exer...
👇🏼👉🏼
MasterCam 3D Modeling Tutorial in Hindi - With Tips & Tricks:
• Mastercam Mill Drawing...
👇🏼👉🏼
Mastercam Mill 3D - Surface High-Speed Tool paths:
• Mastercam Mill 3D Prog...
Be Connected we will Update for More Videos on Mastercam
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Area Roughing Toolpaths
Use this toolpath to machine standing bosses and cores, cavities and pockets, or material that other toolpaths left behind.
OpenRest Material Strategy
To enable the Rest Material strategy, the Rest Material checkbox on the Stock page must be activated. Use this strategy to calculate the cutting passes on only the stock left over from one or more previous roughing operations, instead of the entire drive surfaces.
For each area of remaining stock, Mastercam calculates cuts using the Stay Inside machining strategy.
Most Finishing 3D HST use an option similar to the Rest Material checkbox, but is instead named Trim to Stock, and these settings calculate a stock model based on the dimensions of a roughing tool and only apply the toolpath to those areas. Unlike Area Roughing, they do not create multiple cuts in each area. Use them for applications where you want a different cutting strategy than Area Roughing passes, and the remaining stock is light enough to machined with a single cut.
OpenFrom Outside Strategy
To enable this strategy, set the Containment boundary to From Outside in the Toolpath Type page. Use this strategy to machine cores which can approached from the outside. This minimizes the need for helical ramp moves or full-width cutting and is generated from a set of surface profiles that describe the shape of your surface at different Z heights.
With this strategy, Area Roughing passes can extend horizontally beyond your surface boundaries by a small distance; this ensures that all the material lying within the boundaries will be cleared.
The top set of profiles is not typically included in the toolpath, since Mastercam assumes that these lie on the very top of the block. To machine these profiles, set the Minimum depth on the Steep/Shallow page to a Z height above the top of your part.
OpenStay Inside Strategy
This strategy is enabled by default. It can also be enabled by setting the Containment boundary in the Toolpath Type page to Stay Inside. Mastercam uses this strategy to rough out cavities, pockets, or other areas that can most efficiently machined with an inside to outside motion.
Stay Inside maximizes the amount of time the tool is in contact with your part, and can result in significantly fewer retract moves than a standard

[@mastercamtechnicaltraining6676]

very usefull Tutorial

[@VirenderSinghBhati]

Glad to hear that

[@vavjayanand]

Super

[@VirenderSinghBhati]

Thanks

[@Veerkila]

Bahut khoob 🔥🔥🔥

[@VirenderSinghBhati]

Thank u dear for supporting ❣️ us 💕

[@VirenderSinghBhati]

Keep learning keep growing ☝️

[@Aravindjk2012]

Nice bro...

[@VirenderSinghBhati]

Thank u dear for supporting ❣️ us ❤️

[@VirenderSinghBhati]

Be connected and updated for more Videos 😀

[@Aravindjk2012]

Bro pls make that drawing.i was sent your mail...

[@gopalakrishnan4499]

Superb sir waiting for your upcoming videos

[@VirenderSinghBhati]

Thank u dear for supporting ❣️ us

[@VirenderSinghBhati]

Kindly share our videos to other 🙏

[@VirenderSinghBhati]

Be connected and updated for more Videos 😀

[@PratikKCC]

Nice video sir

[@VirenderSinghBhati]

Thank u dear for supporting ❣️ us 💞

[@VirenderSinghBhati]

Kindly share our videos to other 😇

[@mrvicky01010]

Very nice.. Make deeper explanation and more videos

[@VirenderSinghBhati]

Thank u dear for supporting ❣️ us

[@VirenderSinghBhati]

Kindly share our videos to other

[@VirenderSinghBhati]

Be connected and updated for more Videos

[@sumitdebnath4557]

Sir please make videos on turnmill and c axis programming

[@VirenderSinghBhati]

Thank u dear for supporting ❣️ us

[@VirenderSinghBhati]

Dear we already updated videos on C axis Programming

[@VirenderSinghBhati]

We will update videos on Turn mill

[@VirenderSinghBhati]

Be connected and updated with us

[@sumitdebnath4557]

@@VirenderSinghBhati i know , i have already watched this videos. please make more videos on it

[@mdasim8915]

Sir Mastercam me Kaun sa model type file use karte hai?
Such as igs, stp, part, etc

[@VirenderSinghBhati]

Dear you can use all kind of model in Mastercam

[@VirenderSinghBhati]

Thank u dear for more Videos 😀

[@VirenderSinghBhati]

Be connected and updated for more Videos

[@mdasim8915]

@@VirenderSinghBhati but igs file not open in Mastercam

[@VirenderSinghBhati]

Dear u can directly open or use import command

[@Jmsdtrader]

Sir aap ko jaab Hindi pata hai to Hindi mai kyu nahi samjha te ho?
And samjhane ka tarika itna fast nahi hota sir. when you want to speak in English then no problem but slow, so that all are can learn both subjects 1/st MASTERCAM and 2nd learn ENGLISH.
IF I AM WRONG PLEASE SORRY FOR THAT