Once you've fed the wiring thru the chassis to go under, instead of coming up thru the back seat, bypass that and go thru to another grommet situated under the front passenger seat. Once thru, feed the wiring left n under the factory cut carpet, to keep it hidden n safe from damage. Then, take off the plastic sill to feed wiring thru for connection. This way, you only have one plastic cover to take off.
Hi Byron - I've just ordered the HSP tailgate locking kit from you. I assume 90% of the installation is the same, but are you able to do a video showing how/where it connects up front, since apparently there is no splicing with this one. Cheers
So I have the Red version of this and when putting it on the 2 bolts that are there the end rsts against 5he plastic lever at the end and under the metal plate that rotates. It flexes so that if you tug on the handle or just pull hard it opens the tailgate.
I had blue and green cables on lock. I did connect them: -blue to green -green to thin red green. Instead of soldering I use T tap connectors. All work good. Just a little bit too loud. Best Regards
Just installed the new version of this lock - took about 2 hours and works good. Cheers for the lock and the video instructions. Also, there are 2 red/green wires on factory door wiring loom - use the the thinner red/green wire.
Thanks Garry, we have 3 different lift kits, one will be on my car in a few weeks time, and will be taking deposits once it's on my car for the next shipment. Thanks 👍
@@jameshjh8826 Yeah mate. I was actually told a similar ETA on mine on couple of months ago. It certainly seems that a shipment of them has arrived because the dealer up here in Nth QLD has plenty of stock. Even a few X's which typically aren't kept in large quantities I was told.
I actually have the ultimate 9 to compare to the ones I sell. I sell them for $175 and have them in stock. Email me back at jettuningsales@gmail.com. thanks
Hi Chris, since December really happy with it some slight issue with the android auto in the X and apple car play echo issues. Software update will fix the issues when released.
It helps but doesn't fix the issue! I'm working on tuning the turbo lag out, and also have a tuning box I'm testing to try and improve low down torque.
Nice job with the install and your instructions. Left kit? It already looks like it's up to your chest lol. I've sub and looking forward to what you do thus gwm cannon. Certainly worth considering these new cannons, time will tell
Hi there, I'm working on a website at the moment! We currently have a couple of roller shutters but there are selling quick, I also will have 3 different options for lift kits depending on your budget, we also have rear sway bar kits arriving soon, plug and play digitial amplifier booster with full EQ. The tub liner is spray on factory standard from the L model up. Please email me on jettuningsales@gmail.com.
I got my Cannon Ute (base model) it has no spray on tub Liner as standard ....done by a 3rd party in Brisbane @ Rhino Lining Underwood.. Far superior tub Liner then the factory spray tub liner....mines lumpy/rubbery feel to it & coated with between 3 - 5mm overall. I compared both Factory & the 3rd parties tub liner.....Rhino’s Liner wins hands down.
Sorry about that yeah that's because we use our cars off-road and unfortunately the Musso is not a capable off-road vehicle. In comparison to the cannon the clearance is terrible.
Once you've fed the wiring thru the chassis to go under, instead of coming up thru the back seat, bypass that and go thru to another grommet situated under the front passenger seat. Once thru, feed the wiring left n under the factory cut carpet, to keep it hidden n safe from damage. Then, take off the plastic sill to feed wiring thru for connection. This way, you only have one plastic cover to take off.
Thanks for the video can't wait to see all the mods...your teaching me all the places to find without taking it completely apart
No problems at all! Glad to help.
Dude you are awesome. Wish you were in SA. Great tutorial
Hi Byron - I've just ordered the HSP tailgate locking kit from you. I assume 90% of the installation is the same, but are you able to do a video showing how/where it connects up front, since apparently there is no splicing with this one. Cheers
Nice explanation and vehicle.
So I have the Red version of this and when putting it on the 2 bolts that are there the end rsts against 5he plastic lever at the end and under the metal plate that rotates. It flexes so that if you tug on the handle or just pull hard it opens the tailgate.
Great video. Look forward to future postings.
I had blue and green cables on lock. I did connect them:
-blue to green
-green to thin red green.
Instead of soldering I use T tap connectors.
All work good. Just a little bit too loud.
Best Regards
M in South Africa and bought my GWM Cannon by February this year
Please email me jettuningsales@gmail.com
Just installed the new version of this lock - took about 2 hours and works good. Cheers for the lock and the video instructions.
Also, there are 2 red/green wires on factory door wiring loom - use the the thinner red/green wire.
Thanks Danny, glad you got it installed without to many issues.
2021 Cannon X- does the top of the range one not lock either? So ill need to get this as well
Yes no model has a lock.
Please look at the newer lock we sell. Much improved version
savagetech.com.au/products/gwm-cannon-oem-tailgate-lock
Looks great - are there printed instructions/diagram to show my auto electrician?
Hi there, there isn't at this stage however I can provide Colour code for the trigger wire inside the harness. Email me on jettuningsales@gmail.com
Any chance of getting an undercover swing case tool box for the GWM Cannon L?
Good video......accessories for these new utes are near impossible to get yet....
Thanks what do you need ? Have a few different items on the way. Have I drive in stock and more tailgate locks arriving late next week. Thanks 👍
Do you have an install video for a tow bar on this Ute?
Any info on where a canopy and bar work available. I'm looking at the Ute Master load lid but think a canopy would be more suitable.
Please email me 🙏 I'll reply tomorrow thanks again. jettuningsales@gmail.com
I can email canopy design.
Cool video where did you get your are lift kit from from can't wait to see how it turns out👍
Thanks Garry, we have 3 different lift kits, one will be on my car in a few weeks time, and will be taking deposits once it's on my car for the next shipment. Thanks 👍
Can you ship this item to South Africa if I order online, happy to pay shipping costs?
Interested in this item where can I buy it Regards Peter
Pretty sure you've already answered this on the font grille question but plastidip on the rear handle and logo too? Picking my X up today or tomorrow!
Hi mate, are you in Australia? I have been waiting mine for nearly 2months, dealer said coming early April, but might be the end of April.
@@jameshjh8826 Yeah mate. I was actually told a similar ETA on mine on couple of months ago. It certainly seems that a shipment of them has arrived because the dealer up here in Nth QLD has plenty of stock. Even a few X's which typically aren't kept in large quantities I was told.
@@broke123 thanks mate, hopefully coming in Adelaide soon.
Is it necessary to disconnect the battery during installation or will it be fine if it stays connect?
Haven't had any issues without doing so. But that's up to you
Excellent, love the comments, such as "grubby fingers" or "mickey mouse"......all good.....thanks for the lecture.....have subscribed.....cheers!
Hey like your black kit on tail lights log and tailgate handle. Is that factory or aftermarket?
Taillights are stock! Not black might be the angle, the handle is Plasti dip but we have kits coming stick on diy packs to black the compete car out.
Great work once again. Have you, or are you considering putting an Ultimate9 throttle contriller on?
I actually have the ultimate 9 to compare to the ones I sell. I sell them for $175 and have them in stock. Email me back at jettuningsales@gmail.com. thanks
Ship to NZ?
Sure can, please send me email at jettuningsales@gmail.com. Thanks
Does this work on all the gwm
All the cannon utes
Thanks for the video, just wondering how I can contact you and I am really interested in this lock.
use sone lube /silicon spray to help get the cable in the grommet
where about are you? Sydney?
Brisbane but our dealer in Sydney can fit our products
How long have you had the ute are you happy with it
Hi Chris, since December really happy with it some slight issue with the android auto in the X and apple car play echo issues. Software update will fix the issues when released.
Question ...does the Ultimate 9 throttle controller or similar improve the throttle response significantly on these new GWM Cannons ?
It helps but doesn't fix the issue! I'm working on tuning the turbo lag out, and also have a tuning box I'm testing to try and improve low down torque.
I need this tailgate locker
jettuningsales@gmail.com
@@SavageTechAustralia how much is it including shipping
Hi mate Where can I buy?
And what's this amplifier booster? Cheers
Hi Jason, please email me on jettuningsales@gmail.com, we are in Brisbane and ship Australia wide also South Africa/NZ.
Nice job with the install and your instructions. Left kit? It already looks like it's up to your chest lol. I've sub and looking forward to what you do thus gwm cannon. Certainly worth considering these new cannons, time will tell
Thanks 👍 it's Gained some height from the 285/70/18 on it! So with a 2" lift should be a monster truck haha
I also got caught out by the little red/green vs big red/green
sneaky little Greatwall 🤣
GOOD JOB MATE
Hey mate I was wondering if you had a website? And do you sell any other mods for the gwm cannon x? Also is that a spray on tub liner you have?
Hi there, I'm working on a website at the moment! We currently have a couple of roller shutters but there are selling quick, I also will have 3 different options for lift kits depending on your budget, we also have rear sway bar kits arriving soon, plug and play digitial amplifier booster with full EQ. The tub liner is spray on factory standard from the L model up. Please email me on jettuningsales@gmail.com.
I got my Cannon Ute (base model) it has no spray on tub Liner as standard ....done by a 3rd party in Brisbane @
Rhino Lining Underwood..
Far superior tub Liner then the factory spray tub liner....mines lumpy/rubbery feel to it & coated with between 3 - 5mm overall.
I compared both Factory & the 3rd parties tub liner.....Rhino’s Liner wins hands down.
What the price for you to install?
Hi Brendan, please send me email to savagetechsales@gmail.com what state are you located?
Is the pricing include shipping?
Please email me on jettuningsales@gmail.com, then I can quote your shipping costs based on your exact postcode.
What State are you from
Queensland
Nice video. Mate were are u in QLD. I'm brisbane.
Sorry forgot to leave my number: 0438743000. If u could give me a tx with purchase price + installation. Cheers
@@sionelangi9013 near Woolloongabba
I'm currently working away, back in brisbane on the 20th. Are you free for an install after those date?
Gooood video
Good on you mate
Baby powder on cable will make it slide easily
I burned it i used the thicker green and red wire
Just note to use the thinner green and red wire
We supply a picture saying do not connect to the thick wire. You possibly didn't purchase from us and just using our video.
👍
Can you please send me your email? I need this part, installation and others
jettuningsales@gmail.com
@@SavageTechAustralia Where can I buy some of these lock kits and are they in stock? Thanks
The best solution would be to take it back to the dealer and get it fixed under warranty for free. You have a 7 year warranty. Use it.
Get what fixed ?
its not a factory option
It is a ute not a car!!
@@robertbutler8004 wire
You are so smart 🤓 thanks for the tip 🤣
@@SavageTechAustralia agreed at least I know the difference between a ute and a car.
@@robertbutler8004 so glad you do. Must be a huge relief, hopefully you can sleep at night knowing that.
It is a shame you supported China instead of Korea in the purchase of a ute.
Sorry about that yeah that's because we use our cars off-road and unfortunately the Musso is not a capable off-road vehicle. In comparison to the cannon the clearance is terrible.
But maybe in the future we could do some parts for them.
Thanks for the video, just wondering how I can contact you and I am really interested in this lock.
Savage Tech Australia
7/18 Ellerslie Rd, Meadowbrook QLD 4131
0478 619 836 g.co/kgs/sepi6B