Double triple decker awesome class! It is good to have this option to use instead of the water soluble stabilizer. I really enjoyed everything. So glad you are humble enough to allow and receives others input too. Thank you soo much !
i just heard you say you are from the northern side of Chicago, good to have someone soooo talented in my area. I stay out in Montgomery, Loving these classes, awesome job, lots of info, very good directions.
Wow, never had to use the Backstitch button near the bottom of Obj Prop. It worked perfectly. Mystery solved. Thank you for the explanation. Reviewing my notes. Can't wait till you are finished with your book!
TBF format, is it only supported by tajima? why do you prefer to use TBF, is it mainly because of needle color configuration or other significant reason?
Help! At clip 35.29 you double your heart and criss cross it. Just before this point I hear you say "backstitch" to square the edges. When I try to do the same on my Wilcom design, using the same setup, my heart reverts to a backstitch border and no tatami fill. The edges will square after I use Trapunto though. What am I missing trying to apply backstitch as shown on the video?
Here I am changing a settings inside the object properties. I am not turning the whole stitch to a backstich, I am only changing the tatami setting inside the object property to a squared setting.
GOOD AFTERNOON. SO A COUPLE OF QUESTIONS FOR YOU. WHEN I WENT TO YOUR AMAZON LINK TO ORDER MY BALL POINT NEEDLES I COULDN'T FIND OUT WHICH ONES WERE THE BALL POINT COMPARED TO THE SHARPS. I WAS WONDERING IF YOU COULD SEND THE EXACT CODE ON THE PACK OF NEEDLES SO I CAN ORDER THE RIGHT ONES. I HAVE A BUNCH OF SHARPS RIGHT NOW BUT I NEED TO GET THE BLUNT TIP. THANKS. ALSO IN YOUR LAST CLASS YOU USED A CENTER RULER THAT LOOKED HANDY. CAN YOU SEND WHERE YOU GOT THAT ALSO & WHAT KIND IT IS? I'M LOVING YOUR CLASSES. I'VE MADE SOME PATCHES & SOME BEANIES SINCE CLASS. MY WORRY IS CUTTING THE MATERIAL WITH THE SHARP NEEDLES. I HAVE TO TELL YOU YOUR LETTERING LOOKS VERY, VERY CRISP & CLEAR. I'LL NEED TO PRACTICE & GO TO CLASS ALOT & REWATCH ALOT BUT I AM LEARNING--THANKS AGAIN FOR ALL THE WORK YOU PUT INTO YOUR CLASS-BEVYJEAN
Hello Bevy, thank you very much for the message. For ball point needles you want to choose FFG, for universal all around needles RG, and for sharp needles use RS. Here's a link with some detailed information regarding needles, let me know if you have any questions. www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Category_Code=needle-information As for the centering ruler here's the info: Graphic Alignment System amzn.to/3IJiJKR
Good evening Romero, I own a Ricoma MT1501. Originally I had the basic software that came with it but now they have closed out some of its use so we need to upgrade. I used the free hatch for 30 days. I want to get a good software so I can start taking in orders again. Should I go with Chroma Luxe or Wilcom Hatch. I see you are teaching from hatch so I do believe I will be able to operate better by watching you. Do you mind giving your opinion on this please?
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Very nice job. I learned a lot. Thx so much
Double triple decker awesome class! It is good to have this option to use instead of the water soluble stabilizer. I really enjoyed everything. So glad you are humble enough to allow and receives others input too. Thank you soo much !
Thank you very much for the comment, Im glad you enjoyed it!!
Your instruction videos are so good. They are easy to understand and you take time to explain the little details. Thank You!!
Thank you, im all about the details, thats the only way I learn.
i just heard you say you are from the northern side of Chicago, good to have someone soooo talented in my area. I stay out in Montgomery, Loving these classes, awesome job, lots of info, very good directions.
Very grateful for taking your time and expertise to help us out... Thank you...
Hello from Rhode Island!!☺
Hello, thanks for stopping by!
You are a great instructor!!!
I appreciate that!
Wow, never had to use the Backstitch button near the bottom of Obj Prop. It worked perfectly. Mystery solved. Thank you for the explanation. Reviewing my notes. Can't wait till you are finished with your book!
Thank you Romero!
Thanks!
Just found you. Looking forward to all you videos. Order those measuring rulers.
Thank you!!
Good live thanks #rewind
how is it different from underlay ?
TBF format, is it only supported by tajima? why do you prefer to use TBF, is it mainly because of needle color configuration or other significant reason?
Will it affect the stitching of text if you set to trim , so you don’t have to cut the jump stitch?
Depends what is the design and the size. If you have a bunch of cuts, the back side might start getting pretty heavy.
Help! At clip 35.29 you double your heart and criss cross it. Just before this point I hear you say "backstitch" to square the edges. When I try to do the same on my Wilcom design, using the same setup, my heart reverts to a backstitch border and no tatami fill. The edges will square after I use Trapunto though. What am I missing trying to apply backstitch as shown on the video?
Here I am changing a settings inside the object properties. I am not turning the whole stitch to a backstich, I am only changing the tatami setting inside the object property to a squared setting.
Hello Romero what size cutaway do we use for the beanies in the 5x5 magnet hoop ? TIA
8x8" cut away fits on the hoop
Thanks you
Hi! Does your knockdown stitch always have to be the exact color of your beanie so it doesn’t show?
Yes, it should, or else you’re going to see a net behind your design.
Hi!! Please is there an email for a quote for hat patches. Thank you!!!
Hello, we have a request form at www.romerothreads.com
GOOD AFTERNOON. SO A COUPLE OF QUESTIONS FOR YOU. WHEN I WENT TO YOUR AMAZON LINK TO ORDER MY BALL POINT NEEDLES I COULDN'T FIND OUT WHICH ONES WERE THE BALL POINT COMPARED TO THE SHARPS. I WAS WONDERING IF YOU COULD SEND THE EXACT CODE ON THE PACK OF NEEDLES SO I CAN ORDER THE RIGHT ONES. I HAVE A BUNCH OF SHARPS RIGHT NOW BUT I NEED TO GET THE BLUNT TIP. THANKS. ALSO IN YOUR LAST CLASS YOU USED A CENTER RULER THAT LOOKED HANDY. CAN YOU SEND WHERE YOU GOT THAT ALSO & WHAT KIND IT IS? I'M LOVING YOUR CLASSES. I'VE MADE SOME PATCHES & SOME BEANIES SINCE CLASS. MY WORRY IS CUTTING THE MATERIAL WITH THE SHARP NEEDLES. I HAVE TO TELL YOU YOUR LETTERING LOOKS VERY, VERY CRISP & CLEAR. I'LL NEED TO PRACTICE & GO TO CLASS ALOT & REWATCH ALOT BUT I AM LEARNING--THANKS AGAIN FOR ALL THE WORK YOU PUT INTO YOUR CLASS-BEVYJEAN
Hello Bevy, thank you very much for the message. For ball point needles you want to choose FFG, for universal all around needles RG, and for sharp needles use RS. Here's a link with some detailed information regarding needles, let me know if you have any questions.
www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Category_Code=needle-information
As for the centering ruler here's the info:
Graphic Alignment System
amzn.to/3IJiJKR
Good evening Romero, I own a Ricoma MT1501. Originally I had the basic software that came with it but now they have closed out some of its use so we need to upgrade. I used the free hatch for 30 days. I want to get a good software so I can start taking in orders again. Should I go with Chroma Luxe or Wilcom Hatch. I see you are teaching from hatch so I do believe I will be able to operate better by watching you. Do you mind giving your opinion on this please?
Im familiar w/ Hatch, I did great work w/ Hatch. Haven't used any other software to give an honest comparison. Thanks for the message.
@@RomeroThreads Thank you for replying.