Your videos are very good and comprehensive and also improving. One small tip; when you show the stock tire/upgrade tire comparison, the camera guy needs to hold the camera in an evenly perpendicular position to both tires. The way you have done it here, doesn't really show the stock tire being thinner, because it is closer to the lens, FYI. Keep up the good work!
Holy, this is the video I have been waiting for not for the E ride pro SS but the XXX you should do this for all of the popular bikes it would be extremely helpful. There’s been multiple times where I’ve ordered parts that I thought would fit and they don’t.
sick build! Rather then the traditional range test, which realistically no one rides like, you should test out how long you can ride it flat out on trails/ hills etc. Just a thought! I do appreciate the "science" you guys do with your range tests though. Looking forward to seeing this one rip around!
I made my Warp 9 direct mount stem work with the factory display mount thru the use of a heat gun and some patience. Take your time and the results are hardly noticeable from stock. And this was on a Warp 9 riser handlebar.
One thing I've learned is that if the brakes are weak you might want to start with brake pads only first. Not sure if they will fit these calipers but MTX red racing pads are absolutely awesome. Super grippy and they never ever squeal.
Eride still hasn't gotten back to me on the exact cells used inside the battery. Only that they are Samsung 21700's. This is very important as it decided if you can use the stock battery for power upgrades!
@@Talariaboys Does the battery have a Bluetooth BMS like the mx4? The mx4 you can view the bms from a app and it has the cells listed, maybe they have the same thing?
@@Talariaboys Would love to know what specific cells it has as well! Are you guys getting the software controller upgrade that eliminates the need for the turbo button? And wondering if that will have any effect on the longevity of the bike. What do you think?
I just bought a 16 inch Warp 9 rear wheel from you guys, will get it tomorrow I think. Yay! Was going to run it with stock 19 up front.. Was wondering if the 21 inch in the front might work well with the 16 in back? Avoid spend $ on the 18 inch and can switch between tires! Experiment! Will run The Cheater or the Recon in back, 16 inch. 60 tooth sprocket or can use the stock 55. Thnak you! : )
The most interesting and Benefit:Cost Ratio Comparison would be... A 5k or 7k CHINESE emoto vs a 250cc XPRO or Trail Master 300cc. I'll tell you that the air cooled gas motos will be a better value overall. But it would still be a great dual sport comparison.
🤔 Let's see, compare TWO moto dirt bikes BUILT for the SAME purpose....yeah, that would be stupid! One has a 4-stroke gasoline engine and the other is an electric powered motor and battery. One is 5K while the other is 2k. One has a battery that WILL need replacing after 2-3 years at an enormous cost. WAY more than a 250cc gas engine. One that has a battery that could be dangerous in recharging situations. One that also can ONLY be charged in a SF/freestanding house legally in some states. It's a no brainer sonny b oy... 2k get's you a way more reliable bike that has zero chance of burning up a battery. No go back to your video games...🤣@@Alex-gn6xb
I'm stuck between used 23 Surron that's already modded out (72v Chi, bac 8000, ace forks, brakes and a few other things) or a new SS 2.0, this is a huge help cause I do want to do aftermarket parts. I think the market will catch up just wonder how long. I did see there doing the pre order on the ebmx 9000 controllers for the SS so it looking good.
I am so stoked to find out RevRides is located here in Washington. I am planning on picking mine up this week and I cannot wait! The purple wheels, pegs and bars looks sick btw! 👌
@@Talariaboys Well the owner of Revrides was giving me a hard time when I told him I wanted to drive down and buy one in person. So I ended up just ordering from Griftshift. $4,899 shipped plus no Tax fee!
You guys need to weigh a completely stock surron. Just so you have all the stock weights of the bikes. It would be good info for buyers that are smaller or looking for the lightest model for their kids.
If i knew what i know today about eride pro ss, i would've never bought it! riding on dirt/small jumps, after battery reaches around 40% bike cuts out on ECO full throttle bike 21MPH on SPORT cuts out at about 21MPH, sometimes even not moving at all on ECO, you can turn full throttle nothing happens. After waiting a while jump on the bike & it's slightly better, after about a minute it cuts out again, i thought it was temperature related but motor/controller combo is cool to the touch. Eride pro & their dealers (hyperrides in cali) have no fudding business selling
These are like the kx85 or kx100 of e bikes. You have the pedal style like mountain bicycles and then you have the full size dirt bike style like the varg and then you have these in the middle..
If the Surron wheels fit a Eride Pro SS then why does Warp9 charge a bit more for the Eride wheel set when they are the same size wheel I am looking at on the wheel builder? Am I missing something here? 🤔 Thanks for all the work you guys do reviewing parts by the way. I appreciate it Edit: I found out why, its because the Surron has 203mm rotors compared to the 220mm that the Eride has. Once I changed that the price is the same lol
That would be sweet! If you haven't already check out our store you can find the bike and all the mods you need! let us know what we can do to help! tbelectricmoto.com/products/e-ride-pro-ss-2-0
they are designing one. thats all I Know. you could get this one tbelectricmoto.com/products/tb-direct-mount-stem-fits-e-ride-pro-ss?_pos=1&_sid=c5b35b4d8&_ss=r
Thank you for this super informative video and recommendations! I took your advise and ordered pegs and bars from Warp 9 Racing for my new E Ride Pro SS. However, they do not sell grips. Please let me know some specific grips that you recommend and also where to find them online!
Any idea how wide of a tire I can get on the stock rim before It will rub the chain? 110/90-19s will fit my stock “2.0” rim, but there doesn’t seem to be any offset and there’s not much clearance before chain interference. If it does fit it’ll probably be close enough that tread pattern differences will cause some tires to rub. Just wondering if you ran into that issue yet. Thanks and great vid/bike
Ya we really only recommend up to an 80 wide tire so you don’t have to cut knobs off the side to clear the chain. but if that’s what you want you can give it a try.
Enjoyed watching! Did you find a solution for the chain rattling in the tunnel near drive sprocket? Having the same issue with mine after having an absolute blast on it's first ride in neighborhood trails. Thanks!
Yo stoked to see you guys are in SLC also! I'm thinking about getting this or one of these electric bikes and making it street legal. Do you guys have any experience making these bikes street legal? Is it worth it to have a single bike that can do both??
Lots of great information! Thank you! This thing is going to fit perfectly on my heavy duty one up electric mountain bike rack. Do you know how much the battery weighs? Just approximately. I think I want to pull it out for transportation to make a little less weight on the rack which is rated for 125 pounds. Thanks!!
I love how relatable your justification for buying a new dirtbike is. “Well you see honey, I already have a bike rack that’s perfect for carrying it… I really have no choice but to buy the bike now.” I know we were saving for a house, but I’ve already got this Ferrari t-shirt so… 🤣
hello, i´m a fan of your videos :) I´m thinking to buy a e moto like the e ride ore lightbee. I´m 6 foot 1 so i guess the new wheel makes it feel taller? Does it make a huge difference? i am also thinking about the mx5 cause i heard it´s a bit taller and fits better to "taller" riders. What´s your opinion. I´m also not a big fan of the ultrabee, i just want a fun toy as light as possible and looks more like a "mountainbike" :) maybe the mx5 would be better for me?(mx5 is not yet available in europe) cause i don´t really want to spend ~1500$ for new wheels. these bikes are expensive enough for what they are :D
Getting a E ride pro delivered next week on the warp 9 now getting rims. Do I choose 2024 Surron ultra bee ? For rims also you said 18 inch back and 21 inch front. I’m not seeing a 18 inch option on the wheel builder . Also Thanks for the video man it’s great ! Helps a lot
Bike looks amazing!! I have the E Ride Pro S model. Not the SS. Would everything fit the same?? Thinking about doing a 19 for the front wheel with larger dirt tires and keeping the 17 inch rear wheel.
Hey Talaria Boys, super video. Can't thank you enoungh for the great videos you put out. Unbelievably helpful. Question for you. How do the Pros SS stock forks and shock compare to the Talaria MX4? You were anxious to swap out the suspension on your Talarias and you rave about the new forks and shock. Does the Pro SS need the same suspension upgrade? Or are the Pro SS forks and shock better than the stock Talaria MX4? Many thanks,
Glad you are enjoying the video's! The stock suspension feels very similar to the MX4. Upgrading them would make just as much difference as it did on the Mx4. In our opinion the only thing the Pro SS is better at is having more power. Nothing else about the bike is any higher quality parts wise.
Im planning on getting this bike but im kinda nervous because its a new company and im worried about the build quality and the replacement parts if anything breaks
I’d get it man! They have been working great and the company is growing really fast with a lot of reputable dealers working with them so parts shouldn’t be an issue
Can you put pedals on it? I want to use it in Mexico but the law over there states that ANY motor vehicle needs to be registered unless it has some type of pedal (for pedaling)
The forks should hold up better now that they come with a stiffer spring inside. If they are still softer than you like I would go with the fastace or Ferro forks
First and foremost…I love your videos. My 16 yr old has me watching you constantly. Now… down to business. Are you willing to build an e-ride pro ss for my son, with all the bells and whistles that you feel it should have? He is 6’ 3 and weighs 213 pounds. I want you to send me a budget and get as creative with it as you want,(money is NOT an issue), and if you decide to take this project on I WILL send the funds before you begin. His birthday is on August 13th and his fave colors are burgundy and black. I look forward to hearing from you.
Hey man we would be glad to help! Could you shoot us an email support@tbelectricmoto.com explaining what you might want done. And let us know where your located.
You cannot add this large, but you can get much better tires than the stock ones that do work on the stock wheels. Check these out:tbelectricmoto.com/products/tusk-ground-wire-e-motorcycle-tire
Did you guys find a fix for the rattling on the chain side of the crankshaft? Mine has been rattling since out the box. Tighten or loosen, I get the same results.
Hey guys! I live here in Payson! I have this bike ordered and I want to order the same rim set (18-21) as you have on here but I’m a bit confused. Did you do the builder with tires mounted through the rim builder? I love those tires you have and I want to make sure I get the same ones but your links are confusing me on which to do. And the rim builder would not let me do 18/21. Only 19/21. What am I doing wrong?
I decided to wait on the wheel set. I’m struggling still to find a meaty rear tire that is wide for the stock 19” rim. Right now it just has a Dunlop 45 front tire on both front and rear. Your Moab video was sick. I want to go so bad. 😂
I just got this bike a few days ago. How significant is the power loss with the 18/21? I ordered 18/21 for mine and got a 64 tooth rear...parts are not here yet. I live in NH. Trails here are failry gnarly. I dont really want less power... I dont care about top speed so much. I was kinda hoping it would keep the bottom end the same with the bigger sprocket... I'm starting to consider returning the wheels and just getting a 16 rear...or even just better tires for the stock 19s I'll find out in a few days but what are your thoughts? 5'10" 175lbs.
it does drop in power some and uses more battery for sure, right now we've been running 16/19 wheels with a big tire on the back and we love it! it still has tons of torque with both setups
I have a jangle in the front part of my handle bars and can’t figure out what the sound is. You can’t hear it until I start to go faster. Do you know what that sound is?
Great video, surron Foot peg bracket fits plug and play, throttle, motor, controller mounting points fits surron controller, I was trying to fit surron wheels but no luck Yours are from surron or talaria i mean only back wheel?
We tried the Warp 9 peg bracket and it didn’t fit. Maybe a stock one does but there’s no reason to upgrade to a stock Surron one. And you’ve actually tried fitting a Motor and Controller? Surron wheels fit just fine rear spacing. That’s whats on our bike in this video.
@@Talariaboys I’ve bent my foot peg bracket, fitted surron one fits plug and play, Eride Mentioned me that motor will fit, controller mounting points are same like on surron controller, I have a demo model for sale first batch of bikes should arrive in March i want to put everything from my surron to pro ss it feels better then surron bigger for sure, I was trying to fit back wheel from my surron and it didn’t fit there was like 20mm space left
So im new to all of this, I just want a cool lookin ebike for back n forth to work when I stumbled upon this bike, but... it doesnt come assembled.. & I failed hard just putting a mountain bike together once... what steps could I take to get this assembled properly if bought one?
If you’re doing it for the first time definitely take your time and follow the instructions that come in the box. Also make sure to go over every bolt on the bike to make sure it’s tight. I’d recommend watching this video if you’re struggling. It is the assembly of a talaria mx4 but a lot of the same principles apply. ruclips.net/video/Dt21syYL928/видео.htmlsi=eZ0Y8FamdIiUQEO_
We are waiting for a 2nd 79 bike that is shipping to us and will be doing a video unboxing it and then doing the same as this video with upgrades that have already been installed. It’s taking a long time to get to us. Then a range test
With this set up the rear wheel wasn’t rubbing the chain ?? I’m looking and my bike,and the chain looks kind of close to the stock wheel . My stock rear wheel is bald and want this set up ! Wondering if I need a spacer somewhere.
No it doesn’t, it is close though. Make sure your wheel is strait, adjust your axle blocks to make sure. You should have plenty of room with a stock wheel/tire
Any idea if subframe is the same as Surron? I wanna see if the stunt bar from @standupindustry will fit on my Eride when I get it! Thanks for a very informative and well edited video! 🤙
Looking at my bike I think it should fit, but I don’t have a surron to compare to it. I wouldn’t want to ride any trails with those installed though. They look perfectly positioned to destroy the back of your knees if you bail! Personally I’d try to make my own using round rubber passenger pegs that fold up and back so they won’t catch on a fence/tree/bodypart. There’re a million cheap options and you can fab it from Al or steel stock with just a drill and angle grinder if you don’t have access to a welder. You probably have a different riding style/terrain preference than me so it’s your call. The idea of that slamming through the soft side of my knee just makes me nauseous lol.
I’ve got a talaria r but looking at the e ride pro 2.0. Any insight because realistically people aren’t comparing it to sure on. They wanna know talaria vs e ride nowadays. I like the power but idk about having a belt
Riser bar is just a standard warp 9 3 inch riser bar. The bar riser we used was from E-bike Zilla ebikezilla.com/en/handlebar-stem/10062-handlebar-stem-direct-mount-cnc-black-318mm-talaria-sur-ron-segway-sr-ha022-ebikezilla.html
What kind of street tires do you recommend to replace the stock tires on the e ride pro ss 19 front and rear, please and thank you!!! Been searching for weeks online cant find anything
It’s dope that you even went out of your way to try what fits and what doesn’t, thank you so much!
thanks for watching
@@Talariaboysi want to get one,how do i purchase it!!!
Your videos are very good and comprehensive and also improving. One small tip; when you show the stock tire/upgrade tire comparison, the camera guy needs to hold the camera in an evenly perpendicular position to both tires. The way you have done it here, doesn't really show the stock tire being thinner, because it is closer to the lens, FYI. Keep up the good work!
Thanks for watching!
😢
Holy, this is the video I have been waiting for not for the E ride pro SS but the XXX you should do this for all of the popular bikes it would be extremely helpful. There’s been multiple times where I’ve ordered parts that I thought would fit and they don’t.
Great! thanks for watching
sick build! Rather then the traditional range test, which realistically no one rides like, you should test out how long you can ride it flat out on trails/ hills etc. Just a thought! I do appreciate the "science" you guys do with your range tests though. Looking forward to seeing this one rip around!
Bad idea, most people wanna see maximum range and max range compared to manufacturer claimed range
I made my Warp 9 direct mount stem work with the factory display mount thru the use of a heat gun and some patience. Take your time and the results are hardly noticeable from stock. And this was on a Warp 9 riser handlebar.
Dude, again… exactly what I needed Sunday morning
Glad we could help!
More videos on the ERide Pro SS! Let's see more riding videos of that bike!
Coming eventually! we have lots of snow on our trails!
You should do a light bee S vs talaria xxx for fun since they’re basically the same price
One thing I've learned is that if the brakes are weak you might want to start with brake pads only first. Not sure if they will fit these calipers but MTX red racing pads are absolutely awesome. Super grippy and they never ever squeal.
Eride still hasn't gotten back to me on the exact cells used inside the battery. Only that they are Samsung 21700's. This is very important as it decided if you can use the stock battery for power upgrades!
Ya we asked as well and didn’t get an answer
@@Talariaboys Does the battery have a Bluetooth BMS like the mx4? The mx4 you can view the bms from a app and it has the cells listed, maybe they have the same thing?
@@Talariaboys Would love to know what specific cells it has as well! Are you guys getting the software controller upgrade that eliminates the need for the turbo button? And wondering if that will have any effect on the longevity of the bike. What do you think?
I just bought a 16 inch Warp 9 rear wheel from you guys, will get it tomorrow I think. Yay! Was going to run it with stock 19 up front.. Was wondering if the 21 inch in the front might work well with the 16 in back? Avoid spend $ on the 18 inch and can switch between tires! Experiment! Will run The Cheater or the Recon in back, 16 inch. 60 tooth sprocket or can use the stock 55. Thnak you! : )
Talaria Thrill Seakers Seat covers fit the E Ride. Also full range will start after 6-7 Full charge cycles on battery
Good to know
First one I have seen about upgraded on the pro ss, this is awesome stuff, eep it up, also I would love to see a torp controller on it!
Thanks for watching! Hopefully Torp will make a controller for this bike. Currently the wiring and mounting won’t work.
@@Talariaboys oh really!! Good to know, does that mean there are no aftermarket controllers for the ss?
Torp is good but far driver is better but the ew torp 1000 is good so are Kelly controls
@@ssgfcm very true! I have t seen a lot of videos on the torp and I want to learn more about it
Feel like you didn't watch the video because he says it right in it😂
Great video. Love the upgraded bike.
The carbon fiber and titanium market is going to take off with the eride pro ss. An all carbon fiber frame would be crazy.
The most interesting and Benefit:Cost Ratio Comparison would be...
A 5k or 7k CHINESE emoto vs a 250cc XPRO or Trail Master 300cc.
I'll tell you that the air cooled gas motos will be a better value overall. But it would still be a great dual sport comparison.
whats the point to compare gas dirt bikes and electric bikes)
🤔 Let's see, compare TWO moto dirt bikes BUILT for the SAME purpose....yeah, that would be stupid! One has a 4-stroke gasoline engine and the other is an electric powered motor and battery. One is 5K while the other is 2k. One has a battery that WILL need replacing after 2-3 years at an enormous cost. WAY more than a 250cc gas engine. One that has a battery that could be dangerous in recharging situations. One that also can ONLY be charged in a SF/freestanding house legally in some states. It's a no brainer sonny b oy... 2k get's you a way more reliable bike that has zero chance of burning up a battery. No go back to your video games...🤣@@Alex-gn6xb
I'm stuck between used 23 Surron that's already modded out (72v Chi, bac 8000, ace forks, brakes and a few other things) or a new SS 2.0, this is a huge help cause I do want to do aftermarket parts. I think the market will catch up just wonder how long. I did see there doing the pre order on the ebmx 9000 controllers for the SS so it looking good.
I just ordered two of these using your link. Thanks for all the great videos.
Great! Your going to love them
I am so stoked to find out RevRides is located here in Washington. I am planning on picking mine up this week and I cannot wait! The purple wheels, pegs and bars looks sick btw! 👌
Sweet! If you use our link it helps us out! revrides.com/products/e-ride-pro-ss-2024-model?sca_ref=5922478.jegxmDeYAL&sca_source=Rev
@@Talariaboys Well the owner of Revrides was giving me a hard time when I told him I wanted to drive down and buy one in person. So I ended up just ordering from Griftshift. $4,899 shipped plus no Tax fee!
You guys need to weigh a completely stock surron. Just so you have all the stock weights of the bikes. It would be good info for buyers that are smaller or looking for the lightest model for their kids.
Ya we agree, we’ve been trying to get our hands on one for a while.
loving the purple did the same color scheme to my daughter's sting r.
Nice!
If i knew what i know today about eride pro ss, i would've never bought it! riding on dirt/small jumps, after battery reaches around 40% bike cuts out on ECO full throttle bike 21MPH on SPORT cuts out at about 21MPH, sometimes even not moving at all on ECO, you can turn full throttle nothing happens.
After waiting a while jump on the bike & it's slightly better, after about a minute it cuts out again, i thought it was temperature related but motor/controller combo is cool to the touch.
Eride pro & their dealers (hyperrides in cali) have no fudding business selling
Wow that’s concerning.. have you contacted e ride or hyper rides?
These are like the kx85 or kx100 of e bikes. You have the pedal style like mountain bicycles and then you have the full size dirt bike style like the varg and then you have these in the middle..
Wheres the cheapest site to order from?
Still waiting for an answer
@@kalulubamba53same
eBay
All of them are gonna be 4900 unless you buy used but because it’s still pretty new most your gonna save is like 100-150 bucks
Alibaba
I wonder when the SR is coming out....I know they wanted a version to compete with the Dragon.
We don’t know when it will come out🤷 hopefully soon!
We need some trail ripping with this bike.
Yes we do! To bad all our trails are covered in snow
If the Surron wheels fit a Eride Pro SS then why does Warp9 charge a bit more for the Eride wheel set when they are the same size wheel I am looking at on the wheel builder? Am I missing something here? 🤔 Thanks for all the work you guys do reviewing parts by the way. I appreciate it
Edit: I found out why, its because the Surron has 203mm rotors compared to the 220mm that the Eride has. Once I changed that the price is the same lol
You guys should make a video about how to make the Talaria XXX brakes stop rubbing😂I cant figure mine out lol
The best channel! Thanks for this video
Thanks for supporting
So that leads me to believe that the bike to get is the 79 bike for upgrades because of the 8000 watt motor that is advertised to take on the wheather
That Sotion motor in the Falcon is an amazing motor!
That purple looks sickkkkkkkk
I love the color. It matches my Kizer Drop Bear knife. I am thinking about getting one of these and want to clone yours in mods and colors.
That would be sweet! If you haven't already check out our store you can find the bike and all the mods you need! let us know what we can do to help! tbelectricmoto.com/products/e-ride-pro-ss-2-0
Thanks guys....as a first time 250lbs rider.....would you recommend this bike over Surron and Talaria... ?
Curious if a seat extender will fit? I’m 6’1 and would like the seat a tad higher, especially if there are no options for lowering the foot pegs.
If you get larger wheels there is no need for a seat riser, and even without larger wheels you may not need.
Has Warp 9 said anything about the handlebar mount for the stock display?
they are designing one. thats all I Know. you could get this one tbelectricmoto.com/products/tb-direct-mount-stem-fits-e-ride-pro-ss?_pos=1&_sid=c5b35b4d8&_ss=r
The new 2.0 is out I can’t wait for you guys to get it
Yea we need to try one!
@@Talariaboys great new videos on the torp controller’s
gonna be hard to get all that street legal in germany lol, but i'll try my best as soon its available, wish me luck
Go either yss or ext with the rear suspension
EXT For Sure!
Thank you for this super informative video and recommendations! I took your advise and ordered pegs and bars from Warp 9 Racing for my new E Ride Pro SS. However, they do not sell grips. Please let me know some specific grips that you recommend and also where to find them online!
Protaper pillow top grips is what you want! Lots of sellers online
Any idea how wide of a tire I can get on the stock rim before It will rub the chain? 110/90-19s will fit my stock “2.0” rim, but there doesn’t seem to be any offset and there’s not much clearance before chain interference. If it does fit it’ll probably be close enough that tread pattern differences will cause some tires to rub. Just wondering if you ran into that issue yet.
Thanks and great vid/bike
Ya we really only recommend up to an 80 wide tire so you don’t have to cut knobs off the side to clear the chain. but if that’s what you want you can give it a try.
Enjoyed watching! Did you find a solution for the chain rattling in the tunnel near drive sprocket? Having the same issue with mine after having an absolute blast on it's first ride in neighborhood trails. Thanks!
Wow! Great Infor Thanks again.
Would we be able to put pedal kit on ??
Yo stoked to see you guys are in SLC also! I'm thinking about getting this or one of these electric bikes and making it street legal. Do you guys have any experience making these bikes street legal? Is it worth it to have a single bike that can do both??
What chain length should i run with a 16" rim and 54tooth sprocket?
112 Link!
That purple is nice 👍
Any good seats?
Lots of great information! Thank you! This thing is going to fit perfectly on my heavy duty one up electric mountain bike rack. Do you know how much the battery weighs? Just approximately. I think I want to pull it out for transportation to make a little less weight on the rack which is rated for 125 pounds. Thanks!!
It probably weighs over 30 lbs., so if you’d take the battery out, it should work with your rack.
@@brodienelson380 Nice, thanks!
I love how relatable your justification for buying a new dirtbike is. “Well you see honey, I already have a bike rack that’s perfect for carrying it… I really have no choice but to buy the bike now.” I know we were saving for a house, but I’ve already got this Ferrari t-shirt so… 🤣
@@brettbourassa6358 👍 And, no kids = more toys!
e ride pro ss or yamaha 250f dirtbike???
hello, i´m a fan of your videos :) I´m thinking to buy a e moto like the e ride ore lightbee. I´m 6 foot 1 so i guess the new wheel makes it feel taller? Does it make a huge difference? i am also thinking about the mx5 cause i heard it´s a bit taller and fits better to "taller" riders. What´s your opinion. I´m also not a big fan of the ultrabee, i just want a fun toy as light as possible and looks more like a "mountainbike" :)
maybe the mx5 would be better for me?(mx5 is not yet available in europe) cause i don´t really want to spend ~1500$ for new wheels. these bikes are expensive enough for what they are :D
Getting a E ride pro delivered next week on the warp 9 now getting rims. Do I choose 2024 Surron ultra bee ? For rims also you said 18 inch back and 21 inch front. I’m not seeing a 18 inch option on the wheel builder . Also Thanks for the video man it’s great ! Helps a lot
Hey man you’ll do Surron LightBee wheels! Email us @talariaboys@gmail.com with questions
Bike looks amazing!! I have the E Ride Pro S model. Not the SS. Would everything fit the same?? Thinking about doing a 19 for the front wheel with larger dirt tires and keeping the 17 inch rear wheel.
Yes its the same frame so all should fit
i heard they have the 2.0 version of this bike ..... i want to see that review
Coming very soon
Are you guys going to be doing videos about the pro s?
Not sure yet
William from Eride said they are working on a 72v 50Ah and 60Ah battery upgrade ....poss in 2 months
Hello does the new rims and tires make the bike higher?
Hey Talaria Boys, super video. Can't thank you enoungh for the great videos you put out. Unbelievably helpful. Question for you. How do the Pros SS stock forks and shock compare to the Talaria MX4? You were anxious to swap out the suspension on your Talarias and you rave about the new forks and shock. Does the Pro SS need the same suspension upgrade? Or are the Pro SS forks and shock better than the stock Talaria MX4?
Many thanks,
Glad you are enjoying the video's! The stock suspension feels very similar to the MX4. Upgrading them would make just as much difference as it did on the Mx4. In our opinion the only thing the Pro SS is better at is having more power. Nothing else about the bike is any higher quality parts wise.
You guys are the best. Thanks for this response. Very helpful.@@Talariaboys
Im planning on getting this bike but im kinda nervous because its a new company and im worried about the build quality and the replacement parts if anything breaks
I’d get it man! They have been working great and the company is growing really fast with a lot of reputable dealers working with them so parts shouldn’t be an issue
@@Talariaboys ok thanks bro i appreciate ur help
Can you put pedals on it? I want to use it in Mexico but the law over there states that ANY motor vehicle needs to be registered unless it has some type of pedal (for pedaling)
That that we know of, You can do a pedal version of the Talaria XXX though!
Any upgrades you would recommend for a 6’3 240lbs dude? Definitely getting risers and pegs. Just not sure how the forks would work out for me..
The forks should hold up better now that they come with a stiffer spring inside. If they are still softer than you like I would go with the fastace or Ferro forks
@@TalariaboysOkay good to know. Thanks for the informative content, You guys have an awesome channel!
Is there any where I could store a bike lock without using a bag
I’m deciding between the surron x and the pro ss, anyone have recommendations?
E-Ride Pro SS for sure!
Those riser bars bend easily when you fall. I don’t mean that warp9 is not good. But something you need to know.
Weve never had any issues.
Cuz
their mtb bars
First and foremost…I love your videos. My 16 yr old has me watching you constantly. Now… down to business. Are you willing to build an e-ride pro ss for my son, with all the bells and whistles that you feel it should have? He is 6’ 3 and weighs 213 pounds. I want you to send me a budget and get as creative with it as you want,(money is NOT an issue), and if you decide to take this project on I WILL send the funds before you begin. His birthday is on August 13th and his fave colors are burgundy and black. I look forward to hearing from you.
Hey man we would be glad to help! Could you shoot us an email support@tbelectricmoto.com explaining what you might want done. And let us know where your located.
We can definitely work something out
Because if the engine feet I guess we just have to swap the harness from the surron
Can I add the fat tires on the stock rims
You cannot add this large, but you can get much better tires than the stock ones that do work on the stock wheels. Check these out:tbelectricmoto.com/products/tusk-ground-wire-e-motorcycle-tire
What is that direct mount? Ebikezilla? Does it fit fine with the display?
Ye that is the e bike zilla one, works great with the display but it’s been out of stock for a little while.
@@Talariaboys It's still out of stock as of right now. Sad times!
They are out of stock for the Handlebar Stem Direct Mount
It will be back in stock in a week or 2.
Did you guys find a fix for the rattling on the chain side of the crankshaft? Mine has been rattling since out the box. Tighten or loosen, I get the same results.
Your back tire is the problem you prolly have to lube it and also your chain
Hey guys! I live here in Payson! I have this bike ordered and I want to order the same rim set (18-21) as you have on here but I’m a bit confused. Did you do the builder with tires mounted through the rim builder? I love those tires you have and I want to make sure I get the same ones but your links are confusing me on which to do. And the rim builder would not let me do 18/21. Only 19/21. What am I doing wrong?
did you get it figured out?
I decided to wait on the wheel set. I’m struggling still to find a meaty rear tire that is wide for the stock 19” rim. Right now it just has a Dunlop 45 front tire on both front and rear. Your Moab video was sick. I want to go so bad. 😂
Is this a good beginner bike or to powerfull and would a mx4 be better for a beginner?
It will work just fine for a beginner, you can always start in eco mode and work your way up to sport mode
I just got this bike a few days ago.
How significant is the power loss with the 18/21?
I ordered 18/21 for mine and got a 64 tooth rear...parts are not here yet.
I live in NH. Trails here are failry gnarly.
I dont really want less power...
I dont care about top speed so much.
I was kinda hoping it would keep the bottom end the same with the bigger sprocket...
I'm starting to consider returning the wheels and just getting a 16 rear...or even just better tires for the stock 19s
I'll find out in a few days but what are your thoughts?
5'10" 175lbs.
it does drop in power some and uses more battery for sure, right now we've been running 16/19 wheels with a big tire on the back and we love it! it still has tons of torque with both setups
What about the battery is the charger the same as a Sur Ron?
No the charger is not the same, its a different voltage and plug
man i really want to test ride that bike .....
Its a blast!
How long / many miles will the bike last with the stock motor and battery?
it should last thousands and thousands of miles!
Great vid. I’m thinking of getting ride of my Suzuki 250 and getting one of these. What you guys think?
Its up to you man but this thing is a blast to ride!
I have a jangle in the front part of my handle bars and can’t figure out what the sound is. You can’t hear it until I start to go faster. Do you know what that sound is?
Shoot, I’m not sure what that could be
All good if anything I’ll just take it apart and tighten everything to see if it’ll go away. Thank you!
So no modification is needed for a fatter wheel and tire? The stock tire on my bike looks pretty close to the chain already…
Nope, the upgraded wheels come dished to the side to fit a larger tire though
Great video, surron Foot peg bracket fits plug and play, throttle, motor, controller mounting points fits surron controller, I was trying to fit surron wheels but no luck
Yours are from surron or talaria i mean only back wheel?
We tried the Warp 9 peg bracket and it didn’t fit. Maybe a stock one does but there’s no reason to upgrade to a stock Surron one. And you’ve actually tried fitting a Motor and Controller? Surron wheels fit just fine rear spacing. That’s whats on our bike in this video.
@@Talariaboys I’ve bent my foot peg bracket, fitted surron one fits plug and play, Eride Mentioned me that motor will fit, controller mounting points are same like on surron controller, I have a demo model for sale first batch of bikes should arrive in March i want to put everything from my surron to pro ss it feels better then surron bigger for sure, I was trying to fit back wheel from my surron and it didn’t fit there was like 20mm space left
So im new to all of this, I just want a cool lookin ebike for back n forth to work when I stumbled upon this bike, but... it doesnt come assembled.. & I failed hard just putting a mountain bike together once... what steps could I take to get this assembled properly if bought one?
If you’re doing it for the first time definitely take your time and follow the instructions that come in the box. Also make sure to go over every bolt on the bike to make sure it’s tight.
I’d recommend watching this video if you’re struggling. It is the assembly of a talaria mx4 but a lot of the same principles apply.
ruclips.net/video/Dt21syYL928/видео.htmlsi=eZ0Y8FamdIiUQEO_
Out of the box , which one would you recommend? Pro SS talaria sting r mx4 Or the surron?
Out of the box I recommend the pro SS
Thanks
Looks sweet. No peg brace? I'd like to see more vids on it.
Is the 79 video coming soon?
They already did one on the 79 bike
We are waiting for a 2nd 79 bike that is shipping to us and will be doing a video unboxing it and then doing the same as this video with upgrades that have already been installed. It’s taking a long time to get to us. Then a range test
@chriscall3425 you are correct, I forgot I already watched it. I'm getting old I reckon lol.
@@Talariaboyscool. The aftermarket parts stuff is what I'm wondering about with the 79. Looking forward to the next video on it.
With this set up the rear wheel wasn’t rubbing the chain ?? I’m looking and my bike,and the chain looks kind of close to the stock wheel . My stock rear wheel is bald and want this set up ! Wondering if I need a spacer somewhere.
No it doesn’t, it is close though.
Make sure your wheel is strait, adjust your axle blocks to make sure. You should have plenty of room with a stock wheel/tire
Thanks I’m going to order that warp 9 wheel set now ! aloha talaria boys😎🤙
Did you find out about the Luna float seat?
Luna seat doesn’t fit sadly.
Waiting on 79 bike range test to pull the trigger on my first e-bike come on fam
We have some big plans for the 79 bike vid. And we will be doing a range test soon!
Can you link the Pro Tape grips you used.
tbelectricmoto.com/products/upgraded-handle-bar-grips?_pos=1&_sid=fec0d861a&_ss=r
The bike looked so good I had to hit the 👍button ✔️
Appreciate that brother👍
How do u make an account? Charge your cc first? Do they ship to canada and have a pedal kit?
What yall think about milk racing?
They seem like good quality. We only use warp 9 wheels
Any idea if subframe is the same as Surron? I wanna see if the stunt bar from @standupindustry will fit on my Eride when I get it! Thanks for a very informative and well edited video! 🤙
Sub frame is not the same but probably not a whole lot different, hard to say though
Looking at my bike I think it should fit, but I don’t have a surron to compare to it. I wouldn’t want to ride any trails with those installed though. They look perfectly positioned to destroy the back of your knees if you bail! Personally I’d try to make my own using round rubber passenger pegs that fold up and back so they won’t catch on a fence/tree/bodypart. There’re a million cheap options and you can fab it from Al or steel stock with just a drill and angle grinder if you don’t have access to a welder.
You probably have a different riding style/terrain preference than me so it’s your call. The idea of that slamming through the soft side of my knee just makes me nauseous lol.
Did you ever try to feed? A surron engine ??
Do you have to get new wheels for upgrade to the 21”/18” set or can you rock that on the stock wheels
Yes if you are changing tire sizes you must change wheel sizes too
Sick bike.
Thanks
I’ve got a talaria r but looking at the e ride pro 2.0. Any insight because realistically people aren’t comparing it to sure on. They wanna know talaria vs e ride nowadays. I like the power but idk about having a belt
Definitely just get the tc 500! It makes the talaria have the same or more power than the Eride pro. Use code TB$50MC24 at Darwin EV for $50 off
The thing that no one’s talking about sure it’s the fastest, but how is the build quality I’m hearing frames are cracking and stuff ?
Build quality seems on par with the sting R. I haven’t heard that frames are breaking
Where did you get the colored wheels from?
Warp 9
have you seen if the luna float seat fits yet?
No sorry
@@Talariaboys ok thanks
I don’t see the bar riser and the bar in the parts list? Can someone help?
Riser bar is just a standard warp 9 3 inch riser bar. The bar riser we used was from E-bike Zilla ebikezilla.com/en/handlebar-stem/10062-handlebar-stem-direct-mount-cnc-black-318mm-talaria-sur-ron-segway-sr-ha022-ebikezilla.html
@@Talariaboys ty sir I ordered that and the pegs/stem
What kind of street tires do you recommend to replace the stock tires on the e ride pro ss 19 front and rear, please and thank you!!! Been searching for weeks online cant find anything
If you want a good all round tire for mostly street but can also work on dirt roads and light trail riding I’d run the Shinko 241 19x2.75 trials tires
Does it come with a peg brace stock?
The 1.0 doesn’t and I’m not sure if the 2.0 has one