Awesome!!! Looks like FUN! I also have made some 3 wheel Fun gadgets to replicate the fun I have riding my Sno Scoot in winter( that being gravity powered of course) in my quest for Endless Fun I came up with a summer version of the snow scoot that in many ways replicates the same fun but using wheels to maintain glide while riding downhill w/o snow! Adding an E Skateboard/hub drive to this configuration makes it really feel like the winter counterpoint!!!! And Hub drives allows it to glide "off throttle" unlike belt drive or geared drive skateboards. It even has a similar ride to a Jet Ski with the enhanced aboard setup! There's also a trick setup to to the rear dual wheels that makes all the difference wether gravity only or E board powered!!! Your Scooter looks Brilliant!!! Thanks for sharing your much more sophisticated approach to construction!!!
what a beautiful build! so robust! bolting motors to opposite sides of a single wheel was certainly a new one for me. Thanks for your work and good luck with your channel.
i like you addressed the biggest safety problem with scooters, having one foot behind the other the feet together is a much safer riding style lastly the build is impressive as always I'm more than a little envious of your skill and imagination
how come? I think "surf stance" is safer as it lets you pivot let right easily and gives you stability for braking and accelerating. parallel stance is unstable in my opinion. (maybe I am wrong but never thought of parallel stance being better)
@@jpjay1584yeah i agree with you what a very strange comment. Not safer maybe with scooter but in general i think the surf stance is better you dont see skateboarders riding two feet together because its akward and unstable
I am impressed. You have a marketable product or prototype machine. This is a robust, well-built machine. The sky and your ambition are limitless. Love your journey
This is super cool. I totally want to make one now haha It seems like a lot of stress on the bolts holding the pipe bender to the floor. Also I've learned doing plumbing it's easier the go from top to bottom instead of side to side since gravity is helping with the force. Just a different perspective 🤔
Would like to see one with four wheel independent suspension and four hoverboard motors. Would like to see more details when it comes to the wiring also.
@@hennybutabi komen steeds meer elektrische scooters op marktplaats voorbij. Dan zijn de accu’s kapot en doen mensen ze voor bijna gratis weg. Kan je altijd helpen als je wilt
@@ABCustoms bedankt voor de tip👍. Op belgische 2dehandssites vind je ze zelden want die dingen zijn hier helemaal niet populair. Ik zal marktplaats.nl eens in de gaten houden!
What Batman really needs is a mental doctor. The guy has a lot of money and desperately wants to fight the crime in his town, but the best way he finds to do so is by dressing in the bat suite and jumping on the roofs. Instead of building useless illegal cars he could hire a private army that can get rid of crime in one single city pretty fast. Or he could invest in his town, so it would have a good economy and fair payments for employees, so most of the people wouldn't have a need to commit crime for living... You know, the guy could pay for the education of young people of Gotham...
You should put some gear on, take it somewhere other than a street and put it through its paces. Acceleration, braking, handling and how does it handle a panic stop. Can you even hold on in a panic stop? It's hard for me to have a real opinion about it without this info. Because you were keeping pace with traffic at scooter speeds. Knowing what it can really do/not do is pretty important. Oh, did I say to put some gear on?
11:17, that thing is going to bump steer like crazy! The tie rods need to be close to straight as possible with the control arms. The gocart steering works on carts because they have no suspension
Se ve que sabe su oficio que trsbaja en eso o de automoviles le quedo muy bien pero le hubiera dejado el color del ring de un principio y con asiento ! Mucho mejor 👍 😊😊
Class, but it was necessary to make an aluminum frame to reduce weight, and you need more battery capacity, plus you need a seat if you drive long distances.
@@hennybutabi zou je kunnen vertellen waar je al het ijzermateriaal hebt gekocht? Hier zijn ze best prijzig. Wil ook graag zoiets maken! Alvast bedankt
That's brilliant! Do you think you can build a two person light weight electric sand buggy with the driver in the back? I need one for my wife and I as she can not walk far and we have miles of beach to explore.
Yeah its awesome. I have wooden "1927 Bugatti" cyclecar I built out of 2 hoverboards. I drilled out the alum casing and used 20" bicycle rims with home made spokes. I want to cover it in solar panels so it charges itself up in the sun if I am using it or not. How did you go with trying to reprogram the hoverboard esc's? Or did you use some new ones for electric bikes straight away? How about the weight,? The frame looked sturdy but light!
A more important question is: what for? Why would someone need this type of vehicle? It is crazy impractical design, especially when you already have EUC on the market.
The steering column had to be moved forward so that the tie rods were parallel to the axis of the rear wheel. otherwise, when the suspension operates on uneven roads, the wheels will steer themselves
@@hennybutabi , volgende projectje een tilting reverse trike waar je lekker tussen de assen ligt. Beetje zoals een ligfiets. ;) met motobanden moet het overhellen perfect te doen zijn en toch nog genoeg traxtie behouden.
Let me know what you think in the comments! Thanks for watching!
Invest in grip tape and save your teeth. Nice job, my friend!
Do you make these to sell?
peso?
Awesome!!! Looks like FUN! I also have made some 3 wheel Fun gadgets to replicate the fun I have riding my Sno Scoot in winter( that being gravity powered of course) in my quest for Endless Fun I came up with a summer version of the snow scoot that in many ways replicates the same fun but using wheels to maintain glide while riding downhill w/o snow! Adding an E Skateboard/hub drive to this configuration makes it really feel like the winter counterpoint!!!! And Hub drives allows it to glide "off throttle" unlike belt drive or geared drive skateboards. It even has a similar ride to a Jet Ski with the enhanced aboard setup! There's also a trick setup to to the rear dual wheels that makes all the difference wether gravity only or E board powered!!! Your Scooter looks Brilliant!!! Thanks for sharing your much more sophisticated
approach to construction!!!
Would love me one of these
This thing is awesome! I feel like a sit down version of this with better motors for higher speed would make this a really fun toy.
This guy is a high top 5 of the videos of guy building a type of trike from scratch on youtube
what a beautiful build! so robust! bolting motors to opposite sides of a single wheel was certainly a new one for me. Thanks for your work and good luck with your channel.
i like you addressed the biggest safety problem with scooters, having one foot behind the other the feet together is a much safer riding style lastly the build is impressive as always I'm more than a little envious of your skill and imagination
add a helmet and some riding gear and you all set
how come?
I think "surf stance" is safer as it lets you pivot let right easily and gives you stability for braking and accelerating. parallel stance is unstable in my opinion.
(maybe I am wrong but never thought of parallel stance being better)
@@jpjay1584yeah i agree with you what a very strange comment. Not safer maybe with scooter but in general i think the surf stance is better you dont see skateboarders riding two feet together because its akward and unstable
Excellent job. I love the truss frame. It looks Italian for sure. Lol. I am an old man, but i would ride that with pride everywhere. Love it.
Brilliant build! you should sell as a kit to order!
I really like the truss design for the frame. Cool build. Consider a helmet also.
I am impressed. You have a marketable product or prototype machine. This is a robust, well-built machine.
The sky and your ambition are limitless. Love your journey
Henry you say mistake, I say anti theft device 🤪🤣🤣, brilliant project and build, thank you for sharing
just add a gsm tracker and power lock to the system, should help
Very well-designed and built, try it with a seat too.😊
This is super cool. I totally want to make one now haha
It seems like a lot of stress on the bolts holding the pipe bender to the floor. Also I've learned doing plumbing it's easier the go from top to bottom instead of side to side since gravity is helping with the force. Just a different perspective 🤔
I know I should improve that. Top to bottom is no option for me because sometimes I bend long tubes and the ceiling is nog high enough😏
You must be an expert in scooters, wonderful work, congratulations friend.😊
A brilliant build. Nice. 👍
Excellent, I’d like one on military green for xmas
I mean, he is at the top and the most amazing in this great work, and he has very excellent creativity.
Very cool! I'll take two with extra power to handle hills
I have watched this many times, its amazing idea..it was good if you did as complete process of the video as step by step.. i would try it out.
Would like to see one with four wheel independent suspension and four hoverboard motors. Would like to see more details when it comes to the wiring also.
three motor speed version
I did with 4wd and independent suspension!
Super cool Hen!!!
It's a cool as f@*k, great work dude 😎
You could pull a bike camper with that, and have an awesome trip.
super cool. your sir are a genius
Love it, good job.
I appreciate your duct-tape 'Jig table' 😉
Uff me encanta! el color me hace recordar a las hummers militares, haciendo referencia a que tambien hay scooters creados para la milicia.
Thanks for idea ❤ I will make something similar 😀
Mooi project weer!
Er is in heel Vlaanderen geen hooverboard meer te krijgen denk ik!🔥
Thanks man, ben bijna door mijn voorraad heen😁
@@hennybutabi mooi de tijd om eens op een QS motor over te stappen. Je zult verbaast zijn van het vermogen🔥
@@ABCustoms ik weet het, ik zal eens moeten investeren😏
@@hennybutabi komen steeds meer elektrische scooters op marktplaats voorbij. Dan zijn de accu’s kapot en doen mensen ze voor bijna gratis weg. Kan je altijd helpen als je wilt
@@ABCustoms bedankt voor de tip👍. Op belgische 2dehandssites vind je ze zelden want die dingen zijn hier helemaal niet populair. Ik zal marktplaats.nl eens in de gaten houden!
AGAIN a really cool video from you. If Batman needs an engineer, you can replace Morgan Freeman 😉👌💪
What Batman really needs is a mental doctor.
The guy has a lot of money and desperately wants to fight the crime in his town, but the best way he finds to do so is by dressing in the bat suite and jumping on the roofs.
Instead of building useless illegal cars he could hire a private army that can get rid of crime in one single city pretty fast. Or he could invest in his town, so it would have a good economy and fair payments for employees, so most of the people wouldn't have a need to commit crime for living... You know, the guy could pay for the education of young people of Gotham...
Great looking machine, although there a few areas where I would be a bit concerned as to they're strength and longevity.
Outstanding!
very nice, good job
Te quedo genial .... A los 20 yo quería una cosa así ...
Thank you for your videos 🎉
The dragster of electric scooters 😮
You should put some gear on, take it somewhere other than a street and put it through its paces. Acceleration, braking, handling and how does it handle a panic stop. Can you even hold on in a panic stop? It's hard for me to have a real opinion about it without this info. Because you were keeping pace with traffic at scooter speeds. Knowing what it can really do/not do is pretty important. Oh, did I say to put some gear on?
imagine it with three motors.......
Super Arbeit 👍👍
10:14 You created " Turn left to go right ". And turn right to go left. ☺️
Как всегда ПРОТО СУПЕР!!!!!👍👍👍👍👍
руль выглядит тонковатым. такая длинная тонкая трубка и вся нагрузка при езде на неё
Cool. Great job
12:38 sounds like a starwars drone battle 😂
Very nice. I was said you , do it with 2 wheels front ... 1 or 2 year ago 😊 niccce.
Do a test on the beach
👌 nice, well done
Awesome!! 🤘😎
BatRoller FTW :D
Nice !
Desde COLOMBIA 🇨🇴 excelente patineta y durables cuanto vale? ? Estoy atento gracias
good job
Wise To Wear A Helmet!
That is Awsome, can I have it? But in all seriousness, is there any issues with tire wobble or did you balance them, or is it not an issue?
It's not fast enough to have balance issues😏
That's pretty cool.. & relatively simple.. have some old atv parts tucked away.. hmmm 🤣
Good one!
Cool 👍
11:17, that thing is going to bump steer like crazy! The tie rods need to be close to straight as possible with the control arms. The gocart steering works on carts because they have no suspension
The standing platform looks a bit slippery, probably needs some rubber mat or scoring for grip, especially if it gets wet, other than that good build.
I want an off-road one with good shocks, off-road tires and 3 wheel drive
Parabéns pelo excelente trabalho
Liked , Loved & Subscribed... Keep Up This Good Work Bro... GOD Bless You & Your Family...
Se ve que sabe su oficio que trsbaja en eso o de automoviles le quedo muy bien pero le hubiera dejado el color del ring de un principio y con asiento ! Mucho mejor 👍 😊😊
oh how i wish this would be street legal and available in switzerland, even as bicycle guy...
doesn't matter if its legal, just matters if the cops can catch you
@@chrishayes5755 oh i think Swiss Cops are good enough in Garching people in illegal machines, that i want some legality...
Nice build, I like it! question: what general plate thickness do you use? what wall thickness tubes do you use?🤩
Tubes are 2mm, plate to make the brackets and front suspension is 3mm. thanks
😊 they are now coming out with similar devices for golf golfing instead of golf carts...
Cool video and respect and wow and nice 😊
Class, but it was necessary to make an aluminum frame to reduce weight, and you need more battery capacity, plus you need a seat if you drive long distances.
Geweldig.. super creatief!!!..vroeg me af als ik dit op de openbare weg mag rijden in NL. As always be safe
Dat gaat de politie niet graag hebben denk ik😏
@@hennybutabi zou je kunnen vertellen waar je al het ijzermateriaal hebt gekocht? Hier zijn ze best prijzig. Wil ook graag zoiets maken! Alvast bedankt
how fast does it take off?
Magnifique projet pour un belge 😂😂😂
That's brilliant!
Do you think you can build a two person light weight electric sand buggy with the driver in the back?
I need one for my wife and I as she can not walk far and we have miles of beach to explore.
I'd add 10 cm distance on each side of the front wheels to make more stable curves.
Nice build! Please wear a helmet...
I love content ... simple and clean.... what color is that?
Looks like German taxi Elfenbein colour.
In fact it's the yellow from the motip camouflage series😏
Have you tried riding kneeling? You would lower your center of gravity and the ride would be more stable.
I don't think I will try that😏
Cool build. I am surprised that one motor had so much power. Would 2 be better?
In fact it has 2, one on each side of the wheel😏
Yeah its awesome. I have wooden "1927 Bugatti" cyclecar I built out of 2 hoverboards. I drilled out the alum casing and used 20" bicycle rims with home made spokes. I want to cover it in solar panels so it charges itself up in the sun if I am using it or not. How did you go with trying to reprogram the hoverboard esc's? Or did you use some new ones for electric bikes straight away? How about the weight,? The frame looked sturdy but light!
I jist used bldc controllers from aliexpress, much easier😏
That is Cool
Hi excellent job done... Which city is this?
A more important question is: what for?
Why would someone need this type of vehicle? It is crazy impractical design, especially when you already have EUC on the market.
Nice design and build, but please wear a helmet or you could end up with a squashed pumpkin.
Próbowałeś jeździć na klęcząco? Obniżyłbyś środek ciężkości i jazda byłaby stabilniejsza.
did u have to get a right side and left side drive motors to make this work or was it all done in software?
Each motor has his separate controller, where you can change the direction
Does it get unstable when cornering? I have a similar gokart project but I could never make it happen. I liked it very much
It's not unstable but it feels weird in the beginning😏
Can you tell me why you chose fiberglass instead of sheet metal for the battery box?
It's a bit lighter, and I don't have the equipment to do nice folds in sheet metal.
The steering column had to be moved forward so that the tie rods were parallel to the axis of the rear wheel. otherwise, when the suspension operates on uneven roads, the wheels will steer themselves
nice build..whats the weight ..like ??
I did not weigh it but I estimate around 50 kg.
how does the motor casing handle that kind of weight?, i tried it and it snapped
I don't know. I build all my scooters like this and had zero issues in the past
world championship gloves 🤣🤣. I have similar ones😇😇
Yeah they don't like grinding sparks😁
How did you make both motors go the same direction? Is it a wire cross?
Each motor has a separate controller where you can modify the direction.
Butabi is fun, like Furze used to be. I feel like I can do this in my own shop without an aircraft hangar and $200k of tools.
Digging a tunnel under your house can't be that difficult😁😁
Top Hen !🎷🎤🎺
when you drive i see near the road is so clean. where is you live ? in USA
Belgium😏
Hello, Do you sell the plans or blueprints for this?
Sorry I don't have any
would like to see it climb a long hill.
And the helmet with roadtest ?
great video - skip all the welding make it shorter :)
Cool project. Wist niet datr je hiermee de openbare weg op mocht in België :p
Het mag zolang de politie het niet ziet denk ik😏
@@hennybutabi , volgende projectje een tilting reverse trike waar je lekker tussen de assen ligt. Beetje zoals een ligfiets. ;)
met motobanden moet het overhellen perfect te doen zijn en toch nog genoeg traxtie behouden.
Muito bom!
Would be awesome if you weld in a seat and make a bigger battery.
Practice mode transport 🎉❤
Only thing to do now is make a cockpit suspend over the main deck with hyraulic gyro.
Puedes dar las medidas exactas en español de la estructura