@@pippocreations I have som problems with creating this war to make voronoi have you any sosials for contact? I tried to download wb plagin for grasshopper but i cant't unstal it
Thanks alot. that was simple and very helpfull. I followed everything that you did one by one but I dont have the same outcome. should I trun off the preview for all of them execpt the last icone? should I bake anything?
Hello! Thanks a lot for your feedback and for reaching out. Yes, you probably have to turn the previews off and leave only the last one on. Let me know if this helps!
Hello i am following your tutorial , it is making it easier but with evry trial I seem to get at the step of the polyline ( a message saying insufficient points for a polyline) which make me stop and can't seem to continue without fixing it. Any ideas how I can fix this step please ? I am implementing it to a shoe midsole surface.
Dear Filippo Ruggiero, from minute 10:45 onwards, when you start the procedure to extract the larger surface, things start to go wrong for me and I don't get the same result. When I turn off the preview of all previous instances and leave only the "List item" activated, only one of the voronoi polygons is displayed. The object I'm using is a vase. Could you help me, please?
Hello! This is because the first item on your list is that polygon. What you have to do is "Sort list": Get an "area" component and find out the area of each surface. The area output connect it to "k" on a "Sort list" component. Connect the surface split output to the "A" of sort list component. Reverse the A output of sort list. Connect it to a list item component. Contact me through instagram and I can send you a screenshot :)
Thank you for this great tutorial! I did the same thing for a shoe insole, it is a mesh and I added it as geometry. I closed the polylines, filleted and lofted it with the scaled part because I don't have a surface and couldn't use the surface split. But the edges of the mesh are not smooth nor closed. Can you please help me fix it?
Hi Filippo, i have a problem when i apply the voronoi3D to the surface inside of a bounding box bigger than the surface. it seems not to see or recognize the edges of the surface so i have open cells next to the edge. thanks in advance, i really like the video and so far i really understand the working of each component.
Hello, thank you for your informative content. I am working on the same command, but the offset curves on the part are not equal and come out in different sizes. However, I want them to have an equal thickness. What should I do to achieve this?
Thank you. 🙏🏽Your tutorial is really clear for a complicated subject.
Glad it was helpful!
fantastic! thank you
Finally i found what i need! Thanks!
I'm glad to hear that!😊
@@pippocreations I have som problems with creating this war to make voronoi have you any sosials for contact? I tried to download wb plagin for grasshopper but i cant't unstal it
@@LurLemurllcorp send me a private message on instagram @pippocreations
@@pippocreations I wrote you as @toghrulsardarli
I started from a brep not a surface and now can’t get past this point ? 10:25 any help would be great I’m new to grasshopper
Hello!
Maybe you should try to decompose it and use th surface of you interest. Would that work out?
Thanks alot. that was simple and very helpfull. I followed everything that you did one by one but I dont have the same outcome. should I trun off the preview for all of them execpt the last icone? should I bake anything?
Hello! Thanks a lot for your feedback and for reaching out. Yes, you probably have to turn the previews off and leave only the last one on. Let me know if this helps!
Great tutorial, thank you
Glad it was helpful!
Hello i am following your tutorial , it is making it easier but with evry trial I seem to get at the step of the polyline ( a message saying insufficient points for a polyline) which make me stop and can't seem to continue without fixing it. Any ideas how I can fix this step please ? I am implementing it to a shoe midsole surface.
Dear Filippo Ruggiero, from minute 10:45 onwards, when you start the procedure to extract the larger surface, things start to go wrong for me and I don't get the same result. When I turn off the preview of all previous instances and leave only the "List item" activated, only one of the voronoi polygons is displayed. The object I'm using is a vase. Could you help me, please?
Hello!
This is because the first item on your list is that polygon. What you have to do is "Sort list": Get an "area" component and find out the area of each surface. The area output connect it to "k" on a "Sort list" component. Connect the surface split output to the "A" of sort list component. Reverse the A output of sort list. Connect it to a list item component. Contact me through instagram and I can send you a screenshot :)
@@pippocreations Thank you very much for your response in such a short time. I will contact you on Instagram.
Thank you for this great tutorial!
I did the same thing for a shoe insole, it is a mesh and I added it as geometry. I closed the polylines, filleted and lofted it with the scaled part because I don't have a surface and couldn't use the surface split. But the edges of the mesh are not smooth nor closed. Can you please help me fix it?
Hello!
You might hav to re-mesh, or work on the mesh itself. Another option could be adding the thickness in Rhino instead
Hi Filippo, i have a problem when i apply the voronoi3D to the surface inside of a bounding box bigger than the surface. it seems not to see or recognize the edges of the surface so i have open cells next to the edge. thanks in advance, i really like the video and so far i really understand the working of each component.
Hello!
Please contact me through instagram @pippocreations with some screenshots and we will see what we can do :)
Hello, thank you for your informative content. I am working on the same command, but the offset curves on the part are not equal and come out in different sizes. However, I want them to have an equal thickness. What should I do to achieve this?
Hello! Can you please contact me through Instagram (@pippocreations) with a screenshot to understand what you mean :)?
Thank you
Is there a way I can do a gradient for the pattern or is it always randomize?
@@MaryMary_nu hello!
You mean like this?
ruclips.net/video/R3AohyUMUl8/видео.htmlsi=u0S4kSh9DBgsKfiq
@ Yes! But how would I apply it with a voronoi pattern on a multi curved surface
@@MaryMary_nu Maybe this one helps ?
ruclips.net/video/RcqMkl25eLg/видео.html
@@pippocreations thank you!
Hi I having a problem after the surface split
Hi!
Send me a DM on Instagram with a screenshot and I will have a look
Perfect ❤🎉
Thanks a lot! I really appreciate it! ❤
I had an issue with my brep brep. It went red when I attached my geometry, as a result I couldn’t see where they intersect
Hello! Please send me a DM with a screenshot on Instagram and I will try to find the issue 😊
Could you please introduce the plugin which used at the end
Hello! It is called weaverbird. You can find it by typing admin package on Rhina and install it
hi, i dont have the WB how can I make it? I just need that to finish
Hello!
Try typing "package admin" on Rhino and find it there. Let me know if it works
Nice