Your website is awesome. I downloaded a couple plans and plan to build more items from it. You are very talented. My weekend of building/cutting knobs. Thank you.
very nice but one thing is that the punch nut should be in the opposite side of the screw. if you put it on the same side the punch nut will end up loosening up. U can make a counterbore on one side and put the punch nut there and screw from the opposite side.
Excellent, Excellent and Excellent, Super what a great idea and nice work with description I like it and I can say you are a great wood worker , Thank you for this wonderful video
Идея с кондуктором для барашков просто замечательная. Обязательно ей воспользуюсь, за что тебе огромное спасибо и лайк. Но вот с усовыми гайками ты, на мой вгляд, не прав: барашек надо закручивать так, чтобы гайку вдавливало в дерево
Верно. Сам на этом убедился. Только что собрал распиловочный стол на ручной циркулярке. Сделал самодельные барашки на этих гайках без всяких кондукторов. Просто треугольники и закрутил. После пробных резов (8-10) смотрю, а два из трех креплений вышли на треть. Буду переворачивать.
Мазай, ты делаешь полезные приспособы. Подумай, чего тебе не хватает, чтобы привлечь внимание большего количества подписчиков. Удачи и творческих успехов!
hi, great video thx. Question: should the threaded insert be opposite of where you placed them? Seems to me that as you tighten the knob you want the prongs on the insert to push into the wood (hope that makes sense)
You are absolutely right. But as you can see at 08:45 I made a little short threaded rod and twisted it as you said it does not work. Anyway, thanks for the advice, I think my viewers might find it useful.
@@MazayDIY thanks for reply. Can you clarify how you mark the various angles with the pencil on the jig? I'm having trouble visualizing where the angles are relative to.
buenos desde España, gracias de antemano por este estupendo proyecto, tengo una duda sobre la colocación de los grados, ya que no sé si los colocas midiéndolo con un transportador de ángulos o los colocas según tu criterio. podrías ayudarme y explicarme como la haces?. gracias y un cordial saludo.
¡Gracias por las amables palabras desde la cálida España! Marco 00:55 con una brújula: esta es una forma conocida de dividir un círculo en 3 o 6 partes iguales (casi iguales, pero para nuestro caso servirá). El método se basa en la fórmula de la circunferencia L=Pi x D = 3,14 x D = 6,28 x R. Espero haber entendido bien tu pregunta.
Верно. Сам на этом убедился. Только что собрал распиловочный стол на ручной циркулярке. Сделал самодельные барашки на этих гайках без всяких кондукторов. Просто треугольники и закрутил. После пробных резов (8-10) смотрю, а два из трех креплений вышли на треть. Буду переворачивать
Hi! No - different distances (40 and 45 mm). You can view all the dimensions in the plans - drive.google.com/file/d/1jIiDx4Q3VURspR-RFcFwuMLARsNHR7wN/view?usp=sharing
Здравствуйте. Вопрос по чертежам. У Вас указано, что большое отверстие диаметром 72мм. Насколько это принципиально? Так как ни кольцевых, ни коронок такого диаметра найти не могу. Только 74мм или 69мм
your method of making knob need expensive tools.Provide more simple method using manual tools so that it can be effort by everyone interested in carpentry.
I respectfully disagree with your idea that you need expensive tools. Another You Tube channel that I really love is 3 x 3 Custom by Tamara. Her philosophy is that there is always more than one way to accomplish a task in woodworking. It may take a handmade jig, but it can be done. For example if you see this video, he used a drill press that he made himself, and did not need or use an expensive drill press. Another option would be to use an inexpensive drill guide. It may take longer, but it would work. Also If you don't want to invest in a table saw, there are a ton of videos on how to create a circular saw guide that can be really inexpensive for cutting your wood to size. Two excellent jigs are on the channels DIYforknuckleheads, and Allflavors workshops. It can be done.
@@MazayDIY Here's a nice simple trick: Just barely start drilling the hole saw as a reference, then switch to a Forstner and drill just into either side to the hole saw kerf (depending on whether you want to save the plug or the outside piece). This allows for sawdust removal and keeps heat to a minimum. You performed a version of this when you cut the knob housing after the two overlapping cutouts.
Зачем тут 2 полости для сверловки, когда достаточно одной ибо мы кондуктор жёстко крепим к станине/столу и не вращаем? Чтобы что? Посильнее устать, делая то что не нужно?
Конечно для этого, а зачем еще мастерская еще? ))) На самом деле, расстояния от оси разные, чтобы можно было изготавливать барашки разной формы - для шестилучевой необходимо расстояние побольше, а для 3-хлучевой лучше меньше, чтобы хват был лучше
@@MazayDIY Об этом где-то в видео сказано? По сравнению с центральным кругом в 75 мм, отступ от центра в 3-4 мм выглядит как погрешность. Ну и у вас канал чтобы фокусы показывать или объяснить как можно что-то сделать без умалчиваний и загадок?
Из бумажки или картона по большой коронке кружок вырезал, точки на нём поставил где пёркой сверлить. Приложил- обвёл -точки поставил-просверлил фрезой маленькие отверстия-просверлил в центре-просверлил большой коронкой..Готово. Нагородил хз чё.....
Well done, great job and thanks for the foc plans. You are a star. Just what I needed.
Halal olsun sənə, Usta!
Xoşladım işini, AZE-dən salamlar 🇦🇿
노브 만드는것 처음봅니다,,,,잘 보고 갑니다,
Good idea! Thanks!
Your website is awesome. I downloaded a couple plans and plan to build more items from it. You are very talented. My weekend of building/cutting knobs. Thank you.
Muito bem feito, valeu
Muito bem bem feito. Vou copiar . Parabéns 🎉
very nice but one thing is that the punch nut should be in the opposite side of the screw. if you put it on the same side the punch nut will end up loosening up. U can make a counterbore on one side and put the punch nut there and screw from the opposite side.
Спасибо за подсказки однозначно лайк и подписка
This is a very great tool ! 👍 👌 🙋♂️
Looks a great idea, will have fun making and using this. Thanks
Wonderful idea with little equipment ... Excellent
Muchisimas gracias, me fue muy útil.
Excelente trabalho. Parabéns 👍🏻👏🏻👏🏻👏🏻
Muito bacana ficou excelente seu projeto MANIPULOS foi uma ótima apresentação e muito boa à demonstração valeu obrigadao
Excellent, Excellent and Excellent, Super
what a great idea and nice work with description I like it and I can say you are
a great wood worker , Thank you for this wonderful video
Excelente aporte amigo!
Me lo apunto para copiarlo.
Saludos cordiales desde Reynosa México!!!
Good luck, Juan Garcia!
Great, thanks for the free drawings.👍👍💪🛠🛠
Excelente!!!! felicitaciones!!! Me acabo de suscribir. Gran saludo!
шикарно!
Идея с кондуктором для барашков просто замечательная. Обязательно ей воспользуюсь, за что тебе огромное спасибо и лайк. Но вот с усовыми гайками ты, на мой вгляд, не прав: барашек надо закручивать так, чтобы гайку вдавливало в дерево
Верно. Сам на этом убедился. Только что собрал распиловочный стол на ручной циркулярке. Сделал самодельные барашки на этих гайках без всяких кондукторов. Просто треугольники и закрутил. После пробных резов (8-10) смотрю, а два из трех креплений вышли на треть. Буду переворачивать.
really great video, real skill, thanks
Excellent jig . Super video.
Very clever! Thank you.
great jig; great project. thank you.
Your way is very good
Well done👏 👏 👏 👏
ok this was awesome ty for the vid
Countersink the tee nut head with a 3/4 inch forstner bit works great that makes it flush with the knob
Excellent. Well done and no pointless chatter. Thanks for sharing.
Muito bom
Muito prático. Obrigado
done... thnks bro👌
Excellent
Идея имеет право на жизнь.
Спасибо, что одобрил и дал зеленый свет
Мазай, ты делаешь полезные приспособы. Подумай, чего тебе не хватает, чтобы привлечь внимание большего количества подписчиков. Удачи и творческих успехов!
Good job
Bonjour de France,
Excellente réalisation, félicitations !!!
Merci pour le partage
MICHEL31
hi, great video thx. Question: should the threaded insert be opposite of where you placed them? Seems to me that as you tighten the knob you want the prongs on the insert to push into the wood (hope that makes sense)
You are absolutely right. But as you can see at 08:45 I made a little short threaded rod and twisted it as you said it does not work. Anyway, thanks for the advice, I think my viewers might find it useful.
@@MazayDIY thanks for reply. Can you clarify how you mark the various angles with the pencil on the jig? I'm having trouble visualizing where the angles are relative to.
Bonjour, très bonne idée et très belle réalisation 👏👏👍👍. Je suis très intéressé par vos vidéo, je m'abonne à votre chaîne. Norbert (France)
Explaining what you are doing and what size bits you are using would help.
buenos desde España, gracias de antemano por este estupendo proyecto, tengo una duda sobre la colocación de los grados, ya que no sé si los colocas midiéndolo con un transportador de ángulos o los colocas según tu criterio. podrías ayudarme y explicarme como la haces?. gracias y un cordial saludo.
¡Gracias por las amables palabras desde la cálida España! Marco 00:55 con una brújula: esta es una forma conocida de dividir un círculo en 3 o 6 partes iguales (casi iguales, pero para nuestro caso servirá). El método se basa en la fórmula de la circunferencia L=Pi x D = 3,14 x D = 6,28 x R. Espero haber entendido bien tu pregunta.
👍👍👍
top video
👍
Барашки надо накручивать другой стороной иначе закладные. Будут вылетать или делать их внутри между 2 фанер склееных.
А так все чётко!!!
Верно. Сам на этом убедился. Только что собрал распиловочный стол на ручной циркулярке. Сделал самодельные барашки на этих гайках без всяких кондукторов. Просто треугольники и закрутил. После пробных резов (8-10) смотрю, а два из трех креплений вышли на треть. Буду переворачивать
Excelente trabalho muito bom mesmo só não entendi as marcações dos graus.
Boa noite um excelente projeto. Gostaria de saber essa marcação que vc faz obrigado
I love the video and the plans, thank you. At the 3:17 mark, you drilled a counter bored hole and tapped in a nut. What size drill bit did you use?
The size of the drill must be equal to Width Across Flats on the nut (Wrench size). For nut M8, the size is 13 mm
That’s what I thought. For me, in standard measure 7/16”. Thank you so much. I am building my jig today.
@@MazayDIY cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
very good video I like it alot. I tride to see your free plans but the amazon ads didn't let me see.
Thanks. It was a bug with Amazon ads - I fixed the site, please check
@@MazayDIY What a difference. Thank you so much
Can you please explain how he wrote the degree on the jig. However, how do you download the plans/templates? Thank you!!
👷👍
Buenos días, de nuevo, quería saber de cuánto cm es la corona que utilizaste?
Gracias de nuevo y un saludo
Всё намного проще
You know it sure would nice if on these tool making jigs they could give some measurements!!!!!
All dimensions are in the drawing, you can download it absolutely free. Link is in the video description
Where’s the plans for the ruler style You used in this video?
I'm interested in seeing how you made your wooden drill press
No problem - ruclips.net/video/wZ18E3Lrm9Q/видео.html
Hi, the two smaller holes, are they at the same distance from the center pin (bolt)?
Hi! No - different distances (40 and 45 mm). You can view all the dimensions in the plans - drive.google.com/file/d/1jIiDx4Q3VURspR-RFcFwuMLARsNHR7wN/view?usp=sharing
И стоило делать матрицу что бы на двух деталях ее расхреначить?
однозначно не хватает голосового сопровождения с объяснением размеров и выполняемых операций, думаю подписчики бы ещё подтянулись
Сверлильный агрегат на ладан дышит, ходуном ходит. Может стоит на нормальный заменить?
Да, видно как уводит фрезу. Станине недостает жесткости.
Не у всех есть деньги чтобы купить станок.
@@user-qn7jk5oq9t много времени потратил на эту конструкцию, а результат средненький.
Давайте задонатим по сотни 2 поможем парню. ( не Шучу).
Еще одной не хватает. На 72 градуса.
Can we see this in standard Measurements
Do you mean the imperial system of units in inches? If yes, then I do not have such drawings - only in millimeters
is measurements CM or MM
all dimensions in MM
Здравствуйте. Вопрос по чертежам. У Вас указано, что большое отверстие диаметром 72мм. Насколько это принципиально? Так как ни кольцевых, ни коронок такого диаметра найти не могу. Только 74мм или 69мм
Добрый день! Не принципиально - какую коронку выберете, такого диаметра и будет в итоге у вас барашки
your method of making knob need expensive tools.Provide more simple method using manual tools so that it can be effort by everyone interested in carpentry.
I respectfully disagree with your idea that you need expensive tools. Another You Tube channel that I really love is 3 x 3 Custom by Tamara. Her philosophy is that there is always more than one way to accomplish a task in woodworking. It may take a handmade jig, but it can be done. For example if you see this video, he used a drill press that he made himself, and did not need or use an expensive drill press. Another option would be to use an inexpensive drill guide. It may take longer, but it would work. Also If you don't want to invest in a table saw, there are a ton of videos on how to create a circular saw guide that can be really inexpensive for cutting your wood to size. Two excellent jigs are on the channels DIYforknuckleheads, and Allflavors workshops. It can be done.
burned your buttons nicely - try it with better tools or speed down then it fits
Ricj, wood hole saws are of very poor quality, now I bought new ones and there is no such problem. Anyway, thanks for the tip!
@@MazayDIY Here's a nice simple trick: Just barely start drilling the hole saw as a reference, then switch to a Forstner and drill just into either side to the hole saw kerf (depending on whether you want to save the plug or the outside piece). This allows for sawdust removal and keeps heat to a minimum. You performed a version of this when you cut the knob housing after the two overlapping cutouts.
во нагородил
Какое размером сверло фостнера, и размер барашки
В описании видео есть ссылка на чертеж - найдете в них интересующие вас размеры, остальные тоже пригодятся
@@MazayDIY осталось купить винты и мебельные гайки
It doesn't make any sense the way you screw the knobs on. This is how the screw sleeves are pulled out again. The screw sockets must be at the top.
How about some dimensions
Free plans here - mazaydiy.com/plans/star-knob-jig-plans.pdf
Dam bord
Столько убитого времени ,пластиковые барашки стоят от 15 до 50рублей !
Просто круглые чем не устраивают? коронкой высверлить и делов то... И зачем весь этот гемор...
No need for a negative remark. Don't like it don't watch
Зачем тут 2 полости для сверловки, когда достаточно одной ибо мы кондуктор жёстко крепим к станине/столу и не вращаем? Чтобы что? Посильнее устать, делая то что не нужно?
Конечно для этого, а зачем еще мастерская еще? ))) На самом деле, расстояния от оси разные, чтобы можно было изготавливать барашки разной формы - для шестилучевой необходимо расстояние побольше, а для 3-хлучевой лучше меньше, чтобы хват был лучше
@@MazayDIY Об этом где-то в видео сказано? По сравнению с центральным кругом в 75 мм, отступ от центра в 3-4 мм выглядит как погрешность.
Ну и у вас канал чтобы фокусы показывать или объяснить как можно что-то сделать без умалчиваний и загадок?
Из бумажки или картона по большой коронке кружок вырезал, точки на нём поставил где пёркой сверлить. Приложил- обвёл -точки поставил-просверлил фрезой маленькие отверстия-просверлил в центре-просверлил большой коронкой..Готово. Нагородил хз чё.....
НАФИГ ИНТЕГРАЛЬНЫЕ УРАВНЕНИЯ ТАКУЮ ЕРУНДУ УСЛОЖНЯТЬ. заслуженый диз
Sorry, you can’t talk…I can’t watch.
Sadly, but i dont like video with bla-bla-bla speech
Hmmmm, wie kann man mit solch einen wackelnden Bohrständer genau bohren? Das ist doch Schrott.
It's a lot of unnecessary work, I drill everything like you did in the beginning.
Seriously? A how-to video and you’re not going to say anything?
Sorry, then I’m not going to listen. Bye
💯💯💯👉