Vertical Blind Slats Won't Turn? Easy DIY Repair Tutorial!
HTML-код
- Опубликовано: 3 окт 2024
- Join me as I set out to repair my vertical blinds. The blind slats would not turn when the wand was turned. I encountered an unexpected hurdle--the replacement wand tilt mechanism I bought was the wrong part! But fear not...as I analyzed the problem, I found that I was able to repair the existing wand tilt mechanism. Learn valuable insights, problem-solving techniques, and witness a satisfying repair journey that salvages functionality without the intended replacement. Get ready for an insightful and unexpected repair adventure!
Here's a link to the correct (for my blinds) wand tilt mechanism:
fixmyblinds.co...
Here's a link to a flat tip screwdriver:
amzn.to/47rtiOz
As an Amazon Associate I earn from qualifying purchases
Here's a link to a Philips screwdriver:
amzn.to/3SPmbuY
As an Amazon Associate I earn from qualifying purchases
Here's a link to a needle nose pliers:
amzn.to/3uvhk7S
As an Amazon Associate I earn from qualifying purchases
Tools you will need for this repair:
Philips screw driver
Flat screw driver
needle nose pliers
Thin plastic card (like a hotel key)
10/10 on presentation , explanation & supply list. I’m so glad I don’t have to take all of the blinds down. Thanks Dave!
@@jenniferemerich3106 wow! I’m so glad it worked for you!
I’m so excited that this worked… mine was also just appart.. works now..thanks so much
Great job! I’m so glad it worked!
Thanks the same exact thing happened to mine. The task was a lot easier than it looked. 👍 I just didn't want to break it more. The walk through helped a lot!!
I’m so glad it helped! Thanks a lot for the comment!
Tip to take slat off with 1 hand... hold the slat from up high and push it gently so that it glides straight up (it's a small/ slight motion) and then slide it off to the side
Thanks for the tip! I am sure that will help some people!
Very good job Dave your awesome I'll be a hero to my wife becuase of you 🎉
So glad I could help!
Hope I get a spouse like this someday.
Is it one vertical gear or two at the top. The vertical gear that you took out
Thanks for the comment! There was just one vertical gear.
Haha! Thanks!
Thank you , I did it myself. Didn’t even need maintenance help.
Awesome! I’m glad it helped!
Where can I get a new part at?
Hi. Thanks for the question! Here's a link to the correct (for my blinds) wand tilt mechanism:
fixmyblinds.com/products/graber-g71-wand-control-tilt-mechanism
I dont type i got the chain and rope type but the chain will not turn
Hi. I have not used the chain type so I am not sure about that. I wish you good luck.
Nice try but I can't access the hook at the end of the wand because there is plastic holding it in place ... and covering up the hook.
Hi. Thanks for commenting! It sounds like you are having trouble removing the wand, is that right? Sometimes the plastic ring that attaches to the wand tilt mechanism has to be pushed in and moved to the side to navigate out and unhook. Sometimes there is a plastic piece around the circumference of the wand where it attaches to the wand tilt mechanism. Do either of those sound like what you are running into?
Send a picture if you can
The video cuts off the top part and doesn't show the full image. Try to put on wider lens. Can't see par of what you are videotaping. Otherwise a detailed helpful video.
Hi. Thanks for watching! Sorry if you couldn’t see something. If you have any questions, I’m happy to answer.
Every time you say “as you can see” we can’t see.
Hi. I’m sorry you could not see clearly! I will definitely try to make sure it’s clearer in the future. If you have any questions, I’m happy to answer them.
Your end cap isn't on all the way.
Thanks!
Absolutely impossible to see that.
Sorry you couldn’t see. If you have any questions, I’m happy to answer. Thanks.