As I watched this video it was extremely helpful and informative, but missed one thing that both happened to me and I checked, and found my problem. The vanes were turned (inward) so I reversed them and everything worked perfectly! Thank you again.
Thank goodness I watched this video I had two slats that just dropped...I made a homemade solution until I get the repair kit. Thank you so much for this video.
Wow, Thank you so much; I have lost the blinds instruction manual and I am having minor troubles with one of the clips not closing properly. I'm guess I need to replace it. this helped me figure that out. I had just watched a video about replacing that one clip, then saw your video about the rest of the blinds. again, thank you.
Excellent and well stated video; however, my problem is my blinds won’t slide past one point. I’ve examined the cords and clips. I can’t find a problem. Still a great and instructional video for repairs.
Is it possible to repair the string that draws open the slats from left to right? The slats still turn but they no longer open from left to right because the string seems to have come off its track. The string will pull the tracks to the left but to push them back to the right you have to do this by hand.
I have fabric slats with iron weight piece at bottom. Our slats are not easy to come out from the plastic hook up there and many of these clips are split and broken. You did not mention anything about the clips. Can you please tell what to do if the plastic hooks engaging the slats are broke open.
if you have torn the hole on the end of the slat that clips in to hang, flip the blind over and make a new slot/hole with a paper punch, punch a single hole in the center then nibble left and right to make it like a slot and rehang it.
Thank you for this great video! Question: Are wand controls better or is the cord/chain control better? I've had wands break off over time and I've had to replace the entire headrail.
I didn’t know I had to open the blinds before drawing them back. Now they are stuck halfway, and won’t move in either direction.What can I do to avoid breaking them? Update: I used a long screwdriver as leverage to separate and move the hooks so the panels are back where they belong. So I’m good, but my runners must need lubricating or something. Because when the slats are open, and I try to dray them back, they don’t move very well. I don’t want to pull the cord to force them. What should I do? Thank you.
Thank u. I was able to fix 1 of them. On my other blinds its closed but still let's light in. Idk if I lean to the side I can see outside. I tried to tighten but maybe there just getting old
I made a mistake of spraying down the rail with WD-40 and now I’m having an issue sliding it back-and-forth. What is the correct way to lubricate the rail? I’ve used multiple lubricants running it down the rail and it leaks all down the blinds and on the floor. I’m using blaster silicone lubricant.
So today if you can answer this, I have a wand mechanism. I turned it and it made a little pop sound and now it just turns and turns either way and the blinds don't open. Can this be fixed?
My problem is that the bottom of the slats have weights in them and over the years the glue that makes the channel for the weights has come unglued the weights have fallen out. How do I fix this? Do I need the weights? I notice in the video that there are no weights.
What can be done if the blinds only retract on one side? They rotate fine. But when I pull the cord to move the slats to the sides (they open from the middle and collect on each side), only one side retracts. The other I have to move by hand. Is there a way to “restring” this?
✨Hi , i have a Question . What to do . I have a couple of the ‘Vertical Blinds Clips ‘ that attach to the ‘Slats that broke . Any repair for this . Thanks !!!✨
Hey there, I'm having another issue with my blinds. When I try to turn the wand to let partial light in it only opens about 10% and never anymore, very frustrating. My only option is to completely pull the whole blind open but then everyone can see inside. Do you have a fix or do I need new blinds please?
I see that PJ never answered my query? I also see that PJ does not bother to answer many of the viewers who need assistance. So no subscription. If you got a similar problem of a stuck pull cord (that's to open and close entire vertical) i was advised to take down parts as shown and see about any broken parts; if all parts are okay, clean and lubricate rail or track and see if that works out. However, before you put it up test the track for motion, if not, order a new part. Whoever invented these verticals was a real, complicated, genius.
Exactly the video I was looking for... Straight talk... No wasted minutes... Thanks a lot
P & J Custom Window Coverings
Thank you! This was informative, precise, and what I needed to properly remove the vanes for cleaning.
As I watched this video it was extremely helpful and informative, but missed one thing that both happened to me and I checked, and found my problem. The vanes were turned (inward) so I reversed them and everything worked perfectly! Thank you again.
This was not helpful at all.
You just saved me further frustration demonstrating how to remove a slat! Thank you.😊
Can you please tell how to get replacement clips to attach clips to the rail thank you
Thank you and your family young man God bless you and your family blessings.
Thank goodness I watched this video I had two slats that just dropped...I made a homemade solution until I get the repair kit. Thank you so much for this video.
this is actually a very good video. clear instructions no mumbo jumbo
You missed a common problem of how to repair broken clips.
Please, how do you replace a clip
Thank you. This looks easy. I haven’t done anything yet but I will tomorrow. This is so helpful.
Thank-you! Thanks to yourself and your video I figured out how to fix my curtains !!
Straight talk! Very informative, well-done video. Just what the window-doctor ordered! Thanks!
Clip was pushed up and can't pull down to attach blind
THANK YOU very MUCH for the info. I was able to fix my blinds in about 15 minutes. You Rock P&J dude
Your video was so easy to follow ,answered all my questions while saving me time and money. Thank you❤
Wow, Thank you so much; I have lost the blinds instruction manual and I am having minor troubles with one of the clips not closing properly. I'm guess I need to replace it. this helped me figure that out. I had just watched a video about replacing that one clip, then saw your video about the rest of the blinds. again, thank you.
Thank you for all these tips!
Thanks for this video. It gave me the knowledge I needed to disassemble the blind to make a repair.
Thank you ! I was able to salavge my blinds using the tips in this video. They are soo brittle!
Thanks for this! It told me exactly what I needed to know!
you are the man thats fast now I know thanks a bunch
On the ball Kid, appreciate the vid🇮🇪👍🏼
Excellent and well stated video; however, my problem is my blinds won’t slide past one point. I’ve examined the cords and clips. I can’t find a problem. Still a great and instructional video for repairs.
Very clear and sufficient explanation. Thanks.
Simple to understand. Well done, thank you.
I was hoping you were going to talk about everything repairing like the little clip up in the top that holds the line
Very informative & simple to understand explanations. Thank you
Didn't cover misaligned slats...
One clip is the issue and I don't want to twist it and make a bigger problem.
Excellent Presentation.
Thank you, getting new windows installed.
You make it look so easy. I must not have the magic touch, lol
This was a very helpful video. Thank you so much!
Very well explained in layman terms.
Is it possible to repair the string that draws open the slats from left to right? The slats still turn but they no longer open from left to right because the string seems to have come off its track. The string will pull the tracks to the left but to push them back to the right you have to do this by hand.
Did anybody get back to you with a reply? I have that problem too.
Good video. But you didn't mention replacing a broken stem (which is what I need)? Thanks!
very informative could you talk about how to connect the stick for turning to the blind appreciated
Great information! Helpful…
Great upload thank you .. Now I know I'm screwed & I need to replace the damaged units lol
Good video, but how do I simply replace the broken plastic clips the verticals hang on?
Came here to say the same thing
Excellent explanation. Thank you.
You covered everything but the adjustment rod. Mine spins but won't turn the blinds...
Good informative video no un-packaging or cats. Need info on no turn slats. parts?
Excellent explanation and demonstration
Can the clip an individual slat hangs from be replaced?
Thanks. Fantastic description
I learned a lot , great video.
Very good video...thank you
I have fabric slats with iron weight piece at bottom. Our slats are not easy to come out from the plastic hook up there and many of these clips are split and broken. You did not mention anything about the clips. Can you please tell what to do if the plastic hooks engaging the slats are broke open.
The exact problem I was having!!! Thank you
Thanks PJ! 👍
What about clips slats attach to, how do you race those?
When I ordered my vertical blinds, I ordered extra vertical slats so if one 1were damaged or broken, I could just swap it out.
Thank you so much I have a screen glass window that I’m thinking about installing vertical bl
Can you repair the clip?
Can an individual clip be replaced ?
Very helpful! Thank you!
Good video, thank you. My problem is broken clips that hold the blinds.
Helpful vid. Thanks!
I need to see the repair up close and what you use to connsct the blind. Send me a link on how to do the repair.
What if the clip is way too open so the blinds can’t snap back?
if you have torn the hole on the end of the slat that clips in to hang,
flip the blind over and make a new slot/hole with a paper punch, punch a single hole in the center then nibble left and right to make it like a slot and rehang it.
Thank you for this great video! Question: Are wand controls better or is the cord/chain control better? I've had wands break off over time and I've had to replace the entire headrail.
I also show how to sew curtains and installers like my brother 💕
ive learned im far too rough for these types of blinds lol ... and to curtains we go
I didn’t know I had to open the blinds before drawing them back. Now they are stuck halfway, and won’t move in either direction.What can I do to avoid breaking them? Update: I used a long screwdriver as leverage to separate and move the hooks so the panels are back where they belong. So I’m good, but my runners must need lubricating or something. Because when the slats are open, and I try to dray them back, they don’t move very well. I don’t want to pull the cord to force them. What should I do? Thank you.
Very helpful!
You guy is greatbthanks
Wow thank you for making that I’d love to know what your company is. So I can order from you.
One of the clips that the slat clicks into is broken on my verticals. That wasn't covered in the video. ?????
Good video man
Where I can get vertical holder clip if it broken?
How do you measure to replace? Go by the individual blind length? I want to replace the unit that pops out. The casing is fine. I want all new blinds.
One plastic stem is rotated 90 degrees and can't rotate back to its correct position....now what?
helpful information, thank you for sharing !!
Thank u. I was able to fix 1 of them. On my other blinds its closed but still let's light in. Idk if I lean to the side I can see outside. I tried to tighten but maybe there just getting old
Good video, thank you!
Not sure how you could show all of this and not address a broken clip. Unfortunately, I used your method for removing a slat and broke the clip.
Do you not hear the gripping sound in the turning mechanism/chain?
.thats what I need help with - on an internal mount installation…
I was hoping u would show how to take out a broken stem and replace it with a new one!! 😢
John Goodman, Hollywood Actor and blinds salesman
I made a mistake of spraying down the rail with WD-40 and now I’m having an issue sliding it back-and-forth. What is the correct way to lubricate the rail? I’ve used multiple lubricants running it down the rail and it leaks all down the blinds and on the floor.
I’m using blaster silicone lubricant.
so the clip that holds the bling strip breaks off you need to throw whole blinds out? Cant be fixed?
So today if you can answer this, I have a wand mechanism. I turned it and it made a little pop sound and now it just turns and turns either way and the blinds don't open. Can this be fixed?
VERY informative!
If a carrier stem gets twisted so the blind doesn't like up with the others....is there a simple way to reposition the carrier stem? Thanks!
Mine.dont have strings to close or open or a wand. Does this mean I should just get rid of them?
He did a very nice job but what I wanted to know about he did not cover. How to replace the holder when one breaks???
What about when some of the clips don’t spin.
Thank you
0:39, vanes must first be tilted properly before sliding; 0:49 leading cause of bteaking vertical blind;
1:33, how people break the vertical blind,
Do you still sell the repair parts to glue on? I couldn't find it on your website
My problem is that the bottom of the slats have weights in them and over the years the glue that makes the channel for the weights has come unglued the weights have fallen out. How do I fix this? Do I need the weights? I notice in the video that there are no weights.
Great job!
What can be done if the blinds only retract on one side? They rotate fine. But when I pull the cord to move the slats to the sides (they open from the middle and collect on each side), only one side retracts. The other I have to move by hand. Is there a way to “restring” this?
How can I tell if the gear is broken? Mine doesn’t appear broken but it’s not catching on to the rod 🤔
✨Hi , i have a Question . What to do . I have a couple of the ‘Vertical Blinds Clips ‘ that attach to the ‘Slats that broke . Any repair for this . Thanks !!!✨
I have individual vertical pieces sliding left and right not staying in place like it’s supposed to. Any fix for that?
Hey there, I'm having another issue with my blinds. When I try to turn the wand to let partial light in it only opens about 10% and never anymore, very frustrating. My only option is to completely pull the whole blind open but then everyone can see inside. Do you have a fix or do I need new blinds please?
Are all the parts on vertical blinds standardized?
How do you replace a clip in the head rail that has broken?
Ok so my slats do not come off like that. They have a different attachment at the top. There is a top piece over the whole. Can I still replace them?
P&J do you have a video on string vertical (same as video one) that is stuck and how to fix. Thanks.
I see that PJ never answered my query? I also see that PJ does not bother to answer many of the viewers who need assistance. So no subscription. If you got a similar problem of a stuck pull cord (that's to open and close entire vertical) i was advised to take down parts as shown and see about any broken parts; if all parts are okay, clean and lubricate rail or track and see if that works out. However, before you put it up test the track for motion, if not, order a new part. Whoever invented these verticals was a real, complicated, genius.
@@Montery12😊
Hello, when can I buy the repair kit?
thanks 😁