Thanks for watching! Don't Forget To Like & Subscribe. Buy your very own 3/5 or 4/6 Drop Kit Here: reklez.com/collections/tahoe-yukon-escalade-ext-drop-kits-shocks-2wd-4x4-awd
That is EXACTLY the stance I want. I have a 08 Yukon Denali with 24" Serria replicas that ride on 305/35's. I have been told numerous times I can't do a 3/5 drop because of my air ride......but I've been seeing numerous ppl doing it. I've been a auto-body technician and collision painter for 32yrs. So, although I'm not a mechanic, I know my way around a vehicle along with $60K in tools. Can I order the kit from you? I know how to cut all of the rear-end overhang bump stops off and clean it up. You would never know it's been cut on. I've sprayed HOK, a freehand flames, scallops, stripes ect. Bikes, restos, 100 point Sema cars(only one or two). Any information would be greatly appreciated.
@@isaelvictorio7077 i havent yet. I became very sick and was hospitalized. I lost almost 30lbs and literally almost died. I am back up on my feet again and just started a new job about a week ago. I still want to. I don't even remember all the part#'s of what I need. I'm a autobody and collision painter, not a mechanic per say. I can do some basic things, but nothing I depth motor or tranny wise. With some help from some friends I know it can happen. I can not stand how it sets. So, hopefully in a couple of months I can resume that project. Let me know if there are any special parts I need. I do know how to mix and tig weld, also run a plasma cutter. I have all three. A 3/5 drop is what I'd want. 08 Yukon Denali with air ride.
Great video! I have the 3/5 drop on my tahoe, but they never took out the braket from the back so im always hitting on bumps, can you guys do a 4/6 video, i want to go lower but they told me i need someone to fabricate a c noth for that, is that true?
I have a small question. (07 tahoe 4x4 5.3l) As far as cutting the bump stop brackets... Is there something you can put as a small buffer in case you completely bottom out? Like a two post lift pad or something like that to protect the frame? Obviously with a 4 finger(ish) gap im curious if it's even worth it. I'm thinking 295/55r20 on a 20×9 wheel when I do my 3/5 drop.
Hey man I’d like to see something like the safest way to unload a spring from a 88-06 Chevy. I don’t know if I’m just not using my spring compressor right but sometimes it goes smooth and other times it gets sketchy
Hell yea!! I been looking for a video on this vehicle I got a 2007 ho and I’ll be buying this kit from y’all soon ... been debating a long time because it is the family ride and ride comfort is 100 for me I got the same rubber size too
I have a 12' 4WD. Whats the offset on those wheels? Or what is an acceptable range to use. Also on the website it says " (Must Have Cast Steel Arms 4x4 Model) " Would that mean stock? Do we need to buy them from you all? I know in the video you installed some because the owner had a lift prior.
I have a question I bring down my 2008 gmc yunon denali 3/4 I want to go 5” rear but I want to know if I can use the same extensions that I already have or do I have to buy different ones to be able to go 5” rear…. What I mean is, for example, if I buy a 3/4 lowering kit, can those extensions be used to go 5” and 6” back or not?
What would work better a lowering spring vs a adjustable coil over for a front drop...i already have a 2' inch drop spindle on s10...but would like to go lower...
Can we get a 2019 years Suburban on a drip kit. I got 3053524 wheel and looking for a drop that won’t cause too much rubbing. Maybe some bags on a burban
Ay i have a 2000 Yukon Denali 2wD my question is how do I lower it if mine came out with no springs in the front wats the lowest cost or kit do you recommend Partner
Do you offer a similar drop kir for the older Tahoe 98/99. All stock 2wd at the moment. Needs a lot of work but I want to get an idea how much$ to get it looking pretty low but not cutting or tubbin it.
Looks really nice, I just picked up a 2002 Dodge ram shortbed V8 1500 model. I'll be calling see if you offer anything for it or can recommend nice drop I was thinking 2/3 nice it's my new daily driver.
Got the same tires size but there on a 15 silverado ls 1500 I want to run 26s next but not sure what kit to use I also got 2 inch drop shackles in the rear and stock up front any help would be sick
I have 26'S on my 14 silverado with a 3/5 mcgauhys kit and they rub a good bit,I'm going to sell the 26'S and drop to a 4/6 with 24's. Looks better imo.
Thanks for watching! Don't Forget To Like & Subscribe. Buy your very own 3/5 or 4/6 Drop Kit Here: reklez.com/collections/tahoe-yukon-escalade-ext-drop-kits-shocks-2wd-4x4-awd
Does this kit also work for the Chevy avalanches ? 2007 and up?
I have the same truck how much the dropped?
How does it hold up while towing with passengers in the vehicle?
You think this kit would work on a 2007 gmc yukon 4x4 since the spindle has a center hole??
@@luussanchez258 hey bro I got the same problem as you let me know what you did to drop it like a non 4x4 ?I want this 3.5 " drop too
3rd gen tahoes have the best looks.
Was gonna get rid of my ‘07 then the new body style came out and I decided to keep it! Haha
I agree specially with the badge and molding delete.
Do a video on the full price ...
Im sure it came back yo your shop after the upper a arm came off the spindle because you forgot the bolt that attaches them together. No bueno
🤣🤣 good thing it’s a 2wd also or they would had to mess with a cv axle.
noticed at 4:45 time on the video and was like WTH
Would have loved to see the full install
That is EXACTLY the stance I want. I have a 08 Yukon Denali with 24" Serria replicas that ride on 305/35's. I have been told numerous times I can't do a 3/5 drop because of my air ride......but I've been seeing numerous ppl doing it. I've been a auto-body technician and collision painter for 32yrs. So, although I'm not a mechanic, I know my way around a vehicle along with $60K in tools. Can I order the kit from you? I know how to cut all of the rear-end overhang bump stops off and clean it up. You would never know it's been cut on. I've sprayed HOK, a freehand flames, scallops, stripes ect. Bikes, restos, 100 point Sema cars(only one or two). Any information would be greatly appreciated.
Did you ever did the drop?
@@isaelvictorio7077 i havent yet. I became very sick and was hospitalized. I lost almost 30lbs and literally almost died. I am back up on my feet again and just started a new job about a week ago. I still want to. I don't even remember all the part#'s of what I need. I'm a autobody and collision painter, not a mechanic per say. I can do some basic things, but nothing I depth motor or tranny wise. With some help from some friends I know it can happen. I can not stand how it sets. So, hopefully in a couple of months I can resume that project. Let me know if there are any special parts I need. I do know how to mix and tig weld, also run a plasma cutter. I have all three. A 3/5 drop is what I'd want. 08 Yukon Denali with air ride.
I got 2015 Yukon Denali on 305/40/22 I want to lower close gap in rear with kit so it won't rub or have problems
This is truly what I want . Drop and rims . What is the name of the rims ?
Are those rear shocks part number 2410FF? From belltech
Great video! I have the 3/5 drop on my tahoe, but they never took out the braket from the back so im always hitting on bumps, can you guys do a 4/6 video, i want to go lower but they told me i need someone to fabricate a c noth for that, is that true?
I dont see you needing a c notch but definitely gonna have to cut the entire rear bump stop bracket in the rear above the axle.
Can you give us a description of the products for lowering parts needed and where to find them . Thanks
clean ass look. my question is about the upper ball joint does it have a nut on the bottom?
I have a small question.
(07 tahoe 4x4 5.3l)
As far as cutting the bump stop brackets... Is there something you can put as a small buffer in case you completely bottom out? Like a two post lift pad or something like that to protect the frame? Obviously with a 4 finger(ish) gap im curious if it's even worth it. I'm thinking 295/55r20 on a 20×9 wheel when I do my 3/5 drop.
How far did this Tahoe get before that front upper control arm fell off? The ball joint nut is not install at 4:45 time on the video...
Hey man I’d like to see something like the safest way to unload a spring from a 88-06 Chevy. I don’t know if I’m just not using my spring compressor right but sometimes it goes smooth and other times it gets sketchy
We can do a video of that for sure. Thanks 👌
24"s are perfect on these GM trucks
true, i want these rims, they are 24" factory.
Great video, but how about rear lowering shock Extensions for a 03 tahoe
We use a shorter shock so it rides great without them.
@@ReklezSuspensionWorks ok well thanks for the info, again great stuff you show on this channel 👍👍
Hell yea!! I been looking for a video on this vehicle I got a 2007 ho and I’ll be buying this kit from y’all soon ... been debating a long time because it is the family ride and ride comfort is 100 for me I got the same rubber size too
If you lower it 4” from the back you still need to cut the braket? O just remove the bump stop o cut the bump stop ?
I have a 12' 4WD. Whats the offset on those wheels? Or what is an acceptable range to use. Also on the website it says " (Must Have Cast Steel Arms 4x4 Model) " Would that mean stock? Do we need to buy them from you all? I know in the video you installed some because the owner had a lift prior.
What brand shocks did you use in the front? Like your video
💯
I have a question I bring down my 2008 gmc yunon denali 3/4 I want to go 5” rear but I want to know if I can use the same extensions that I already have or do I have to buy different ones to be able to go 5” rear…. What I mean is, for example, if I buy a 3/4 lowering kit, can those extensions be used to go 5” and 6” back or not?
Excellent video and explanation of everything. I'm definitely subscribing.
What would work better a lowering spring vs a adjustable coil over for a front drop...i already have a 2' inch drop spindle on s10...but would like to go lower...
Adjustable coil overs would handle better.
I have the same drop kit brand bit 4/5 n my alignment is not good cuz of the control arms what do u suggest to do or get tia!
Call us can be many different issues. The very best thing to do is to stop by our shop to check alignment.
does not rub when turning the wheel ? I drop my gmc 3/4
but i dont know wich tire used i have 305/35/24s
love everything about you guys
I don't understand why this kit wont work on Factory AirRide, both systems are the same outside of added electronics ?!?!
I have an ‘07 Tahoe on 24’s. I want to do a 2/4 drop, will I have any issues with rubbing when turning?
I got my Tahoe dropped and it hits all the way around .What can be the problem?
You guys did great work 😊😊
@Reklez suspension works 2/4 on a LTZ TAHOE
I had my 2007 Tahoe dropped 3/5 and it hits hard from the front. I put bump stops on the rear myself so it doesn’t hit in the rear only in the front
That's what I'm worried about, bottoming outin front. What did you do to fix this
Can we get a 2019 years Suburban on a drip kit. I got 3053524 wheel and looking for a drop that won’t cause too much rubbing. Maybe some bags on a burban
Is it the same for older GMC Yukon Denali's too? Im planning to do the same drop kit but in the rear only i drive a 2002 Gmc Yukon Denali Awd
I just did stock shocks and struts on my truck but I wanna lower it with this kit do I need new shocks or can i use the stock ones?
Love you’re videos always crushing it👍🏾😎
Thank you for the support 👌👌👌
Would this drop kit work with the LTZ air ride suspension?
Do u have a video do a drip like this on a 07 suburban LTZ.
My question is did you guys use or can you use the same original lugnuts????
You think on 24s and 3/5 drop youll still be able to tow
How much does a Setup like this run for? Also Labor price
I have a 2004 Yukon Denali XL it’s all wheel drive. Would that kit work for me?
My ABS and Traction Control came on when I had my 4/6 Drop installed in my Tahoe is this normal for it to turn on when installing your kit ?
No not normal
Have a 2007 Escalade all-wheel and I want to lower what do you suggest for a kit
Ay i have a 2000 Yukon Denali 2wD my question is how do I lower it if mine came out with no springs in the front wats the lowest cost or kit do you recommend Partner
I just bought a 2008 yukon slt1, if I bought this kit from your site would it fit? And would i have to buy anything else ?
How do you get rid off the abs traction control and stability track lights and the ebrake I reinstalled the abs sensor and still turns on
Does this 3/5 drop also work on a 2007 Chevy 4wd ?
Yes this kit will work.
Nice job there buddy🙌🏼 I have a tahoe as well hopefully we can work something out on this same kit for mine.... ✌🏼
Thanks! 👌 And of course call us up. We can make something happen.
quick question what brand do yall Recommend around 1 set of 4 tires around 800-900 money range ? help me out im to picky
Do you offer a similar drop kir for the older Tahoe 98/99. All stock 2wd at the moment. Needs a lot of work but I want to get an idea how much$ to get it looking pretty low but not cutting or tubbin it.
Is there any way to get the Tahoe and the suburbans slammed with a 5in drop on the front and a 7in drop on the back
How much is the drop kit an how much for installation on something like this?
What about the swaybar endlink on the passenger side wouldn't it hit
Do you need adjustable upper or rear control arms?
There was no need for shock extenders for this truck?????
Since they're factory struts, will the ride be any stiffer or just like factory?
With factory starts it keeps the ride smooth and comfortable.
If I took a dip too fast will the 24s hit fenders
Looking to put 24's on my '15 Tahoe... is a lowering kit like this something I should be investing in?
Yes use tires 295/30/24
CAN U RECOMEND A PLACE WHERE I CAN GET THE BUMP STOP BRACKET CUT OUT HERE IN THE DALLAS FT WORTH AREA..?
No shock extenders used ??
Do you sell a 2/4 Drop kit for the 2014 GMC Yukon 2wd?
Did you Use factory shocks in the front
What relocate brackets did you use??
How much are the drop kits for a 2007 Chevy Tahoe
How can I fit smaller wheels anything smaller than 20 scrapes my strut
Great footage. Keep them coming 👍
How much is the price on a job like that?
? Got a 3/5 on my 08 gmc crew cab y does it bottom out alot wen i got 2 ppl in back seat
Thanks for showing the process. It really helps me when I lower my honda.
Can you use the djm drop spindles on the escalade ext’s?
Is this the same for escalade
Looks really nice, I just picked up a 2002 Dodge ram shortbed V8 1500 model. I'll be calling see if you offer anything for it or can recommend nice drop I was thinking 2/3 nice it's my new daily driver.
Did you guys use the Silverado drip kit on the Tahoe
Y’all are all sold out, when are y’all gonna restock?
Can you do a 3/5 drop on a 4x4 Tahoe same year
Would this work on a 2002 GMC Yukondenali ?
did you have to do a brake upgrade?
Got the same tires size but there on a 15 silverado ls 1500 I want to run 26s next but not sure what kit to use I also got 2 inch drop shackles in the rear and stock up front any help would be sick
I have 26'S on my 14 silverado with a 3/5 mcgauhys kit and they rub a good bit,I'm going to sell the 26'S and drop to a 4/6 with 24's. Looks better imo.
First time ever I disagree with you, @6:00, it will bottom out, that's about 3 inches of clearance... but nice job as always.
I wish I can do this to my 07 Tahoe but I don’t know where to do that I live in gay ass Wisconsin
Question I have the same drop but am having outer tire wear on driver rear and inner rear passenger any ideas?
Your diff needs the pan hard bar adjustbale one , also do u have all rear links and relocater bar brackets
Will it sag or bottom out when you tow anything or with a full vehicle?
Yes
Qué tal buenas noches me gustaría saber el precio tengo una tahoe igual o me gustaría bajarla igual a esa con un 3/5 gracias
Will 24" rims fit on stock suspension?
Yes
@@ReklezSuspensionWorks cool, thank you.
Y’all didn’t drill the whole for sway bar ?
That’s what I was noticing 🤔
which rims are those from chevy, i really liek those.
How much is a drop for a 2004 tahoe in 24s
does this kit work for AWD 2008 Yukon Denali
Yes it does.
Do it hit on back with the 3/5 drop
Very good info simple
@ 5:13 i dont see a upper ball joint nut???
Do you guys have a shop in California?
What kinda wheels are those.
Where I can get those rims "24
I got s 3/5 drop on my avalanche the drop was done in September of last year why does it bounce alot in the rear and the suspension creaks ? Any ideas
Not sure, you can bring it to the shop and have us take a look at it.
bad shocks maybe
How much it’s lowered kits
Will it still hit the frame ?
You got any 4wd Tahoe lowering kits?
Yes we do check out our website.