Adam Desjarlais we really appreciate that comment! I know we have a lot of learning and growing but, that's our focus. We hope to help others through our trial and error. I hope you subscribed for more. But never the less I appriciate the support.
16:24 "I'm not supposed to film her" camera leads right to buddies ass crack. Another great vid. I have an carbide for aluminum porting, it wasn't cheap but goes through like hot knife/butter.
Darrick Grant thanks alot bud! We worked on it on Saturday butthere wasn't enough video for a video. I'll be posting it up tonight. It'll be short but I'll show the progress we made. Looking even better.
First check oil level. 2nd take apart your vtec solenoid. Could just be a clogged screen. Plenty of RUclips videos on that. Try those first then hit us up. We will tell you what to look for next.
Stupid question but is the dipstick from the h22 or from your stock motor out of the accord. I seen your channel and noticed you have a newer year accord.
I did mine H22 Grindr manifold like you guys did and I put a 68mm throttle body I have to bring it back to tuning it starts but it won't go no more than 2,000 rpm
lookin good so far. wonder what gains there are to have with OEM vs Ported. removed the iab off my h22 and it ran like shit. new gaskets and all. put it back on it it was fine. so running a stock mani for now
Waoooo I discover your channel and that's amazing¡ Promise,your garage its the best garage in the world hahha holy shit man,wonderful ambient in the night ;) Hgs from Catalonia.
I believe that intake manifold gould decrease the power because intake charge velocity is decreased and air would not flow straight beacause that area (more turbulence). IAB is fine to delete, I just delete that IAB bodies and then put shorter bolts to intake manifold.
HOW MUCH POWER CAN BE MADE BY PORTING AND POLISHING ANY STOCK HEAD? WORTH THE TIME AND MONEY? 2000 KIA SPORTAGE 2.0 FE AND I WANT ATLEAST 10 MORE HORSEPOWER. WILL P&P MAKE A DIFFERENCE??
Depends on what you run but id say anywhere from 10 to like 50 at most maybe even higher my homie has a k20 and he did alot less pnp then these dudes and he got an easy like 30 more ponies i was like hella suprised
You know we did but we wanted to go budget and try to learn to port. It actually worked out nice. We did have to revisit the mani again recently to polish it. Looks good now.
if you still have not found the female to female manual rack joint the del sol manual rack joint will work thats what im running on the manual rack in my ek
Azyatic so we have a skunk2 main for my cb7 h22 accord but not for the h22 civic. But after the work we did I I think the ported stock one might be better
@@UNDERFUNDEDGARAGE It's alright I just took care of it with mute and then the universe re-aligned. I should have done that to start with rather than bitch about it.
nine honestly buddy I completely agree with you on the edit. Thanks for giving it a chance. I can promise itll get better. Just a fyi we have a track day in mid May we plan on taking the car to so please subscribe and stay tuned. I could use good constructive criticism!
Well that just sucks. We did it because it was good experience but were hoping for gains obviously. We talked about it and if it hurts we will just swap it out for a stock one or aftermarket.
+Giuseppe Randazzo I hate to say it but I'm not really sure. We started with the idea to build a lemons car and then it turned into a Honda track day car. We plan on getting a full cage and fuel cell plus 5 point harness. So we plan on a solid build . Something to have fun with. We've always built our dailys but now we are trying to tow a car to a track and pretend to know something until we learn enough to actually know something. Lol
+mario alvidrez trust me I do. He just hates to film. So I'm stuck filming and when I'm working he's not filming and just chilling. He's my brother and it is his civic. Lol
I know this is old but you guys used the completely wrong bits lol you need tungsten carbide harbor freight has it the are 80$ for 4 bits you can't you that check shit it barely works
I like the way you guys film. You actually tell people what your doing
Adam Desjarlais we really appreciate that comment! I know we have a lot of learning and growing but, that's our focus. We hope to help others through our trial and error. I hope you subscribed for more. But never the less I appriciate the support.
I just did this and my prelude feels pretty good!
Nice. We finished the ek and had it on the dyno and withe stock internals made 200 whp
@@UNDERFUNDEDGARAGE good to know, also honed the frm cylinders myself with silicon carbide fine stones.
16:24 "I'm not supposed to film her" camera leads right to buddies ass crack.
Another great vid. I have an carbide for aluminum porting, it wasn't cheap but goes through like hot knife/butter.
Homebrew Subaru haha.
We just ordered a set of carbide bits today.
I sent mine to Rosko Racing, he did a excellent job with his CNC.
23nessos nice. We would've but we are Under funded . Lol
What they charge you?
Looks good keep up the awesome work and wait to see the next vid
Darrick Grant thanks alot bud! We worked on it on Saturday butthere wasn't enough video for a video. I'll be posting it up tonight. It'll be short but I'll show the progress we made.
Looking even better.
UNDER FUNDED GARAGE can't wait to see the progress I love these part by part builds, keeps me going on my h22 build going on my prelude.
+Darrick Grant sweet bro!! Super stoked to hear that!!
Thanks alot bud! Please stay tuned!
Why the ovals tho. Why not just hollow it out??
The idea was we were trying to get equal flow to each cylinder. Thanks for watching and commenting!
Hi i need help guys my h22 dont pop vtec not sure wat it can be please help wit some info please
First check oil level.
2nd take apart your vtec solenoid. Could just be a clogged screen. Plenty of RUclips videos on that.
Try those first then hit us up. We will tell you what to look for next.
My machanic cleaned the vtec solenoid i bought new gasket for it
Holmes hows oil level?
@@UNDERFUNDEDGARAGE on the dip stick normal
Stupid question but is the dipstick from the h22 or from your stock motor out of the accord. I seen your channel and noticed you have a newer year accord.
I did mine H22 Grindr manifold like you guys did and I put a 68mm throttle body I have to bring it back to tuning it starts but it won't go no more than 2,000 rpm
+Giuseppe Randazzo is it the tps sensor?
UNDER FUNDED GARAGE nope I am thinking it's the map sensor I have to bring to tuning
Giuseppe Randazzo let me know what you find out I'm sure I'll have the same issue.
Mah Boi!
lookin good so far. wonder what gains there are to have with OEM vs Ported.
removed the iab off my h22 and it ran like shit. new gaskets and all. put it back on it it was fine. so running a stock mani for now
🤠
That sensor is Intake temp, and you can leave that IAB plate off.
Sweet. Thanks for the help bud!
snag an RBC intake n h to k adapter, heard its a good upgrade for hood clearance plus shorter runners
KyleDAWG thanks for the heads up bro. We'll look into it for sure!
KyleDAWG p13 is way more powerful
That's more crack than the 80s
Waoooo I discover your channel and that's amazing¡
Promise,your garage its the best garage in the world hahha holy shit man,wonderful ambient in the night ;)
Hgs from Catalonia.
мøłłıαятı мøтøяspoят thanks so much for the comment. Please continue to watch our channel. There's more to come!
how much power did it add?
😀
200hp
I believe that intake manifold gould decrease the power because intake charge velocity is decreased and air would not flow straight beacause that area (more turbulence). IAB is fine to delete, I just delete that IAB bodies and then put shorter bolts to intake manifold.
dyno charts show we made power! check out the dyno day on the recent videos!
HOW MUCH POWER CAN BE MADE BY PORTING AND POLISHING ANY STOCK HEAD? WORTH THE TIME AND MONEY?
2000 KIA SPORTAGE 2.0 FE AND I WANT ATLEAST 10 MORE HORSEPOWER. WILL P&P MAKE A DIFFERENCE??
Depends on what you run but id say anywhere from 10 to like 50 at most maybe even higher my homie has a k20 and he did alot less pnp then these dudes and he got an easy like 30 more ponies i was like hella suprised
That's good to know. We don't know know how much it will add but we figured we had the time so we did it. Even if it was 5 hp it was free.
Not sure exactly. It depends on the motor and what's all done to it
UNDER FUNDED GARAGE Bone stock. Ill get a spare head and give it a try. Thanks for the reply
Elijah Enos ill get a spare head and see what happeneds. Thanks man
What a chopshop
Duane Sather thanks for watching
Did you ever consider an RBC manifold with the adapter plate?
You know we did but we wanted to go budget and try to learn to port. It actually worked out nice. We did have to revisit the mani again recently to polish it. Looks good now.
Thanks for watching and commenting bro!
I should be able to do the same to my “Red Top” F20b right ? It’s got the same manifold!
🤠
DID YOU NEED A TUNE AFTERWARDS ?
yes
if you still have not found the female to female manual rack joint the del sol manual rack joint will work thats what im running on the manual rack in my ek
Pure_Boost nice! Thanks alot bud. We haven't got a hold of one just yet.
No problem man happy to help, gotta keep the honda community informed, just doing my part lol
I didn't know nate diaz works on cars
tim m that made my day. Super funny. Thanks for watching and commenting. Hopefully you can subscribe
lol
Lookin good worked a double or would of rolled thru.....
Can Fro accidentally order me a AFR Lol!
+dave I'll ask him. Lol
From now on 2 of everything for the h22.
dave bummer. We were hoping you would stop by.
How did you guys seal the 3 portions together?
rosco racing plenum
Ight thanks for the info no skunk2 intake mani
Azyatic so we have a skunk2 main for my cb7 h22 accord but not for the h22 civic. But after the work we did I I think the ported stock one might be better
UNDER FUNDED GARAGE thanks man
What's your name on h-t, g?
GuerreroDeLaInfo sorry I'm not sure what h-t means. Sorry bud
UNDER FUNDED GARAGE honda-tech.com
use bp spray when you grind
Giuseppe Randazzo what's bp spray.? I'm thinking man pb spray sounds so dang familiar but I'm drawing a blank . :*/
is like wd 40
Giuseppe Randazzo cool. Thanks bud! I'll buy some and use it for the next video.
no poblem
I would have given this video a chance and watched but then came 5:40
Sorry bud. Bad edit. I'm learning and getting a little better.
@@UNDERFUNDEDGARAGE
It's alright I just took care of it with mute and then the universe re-aligned.
I should have done that to start with rather than bitch about it.
nine honestly buddy I completely agree with you on the edit. Thanks for giving it a chance. I can promise itll get better. Just a fyi we have a track day in mid May we plan on taking the car to so please subscribe and stay tuned. I could use good constructive criticism!
Congratulations.......you just lost a bunch of low end torque for maybe 2hp on the top end.
Well that just sucks. We did it because it was good experience but were hoping for gains obviously. We talked about it and if it hurts we will just swap it out for a stock one or aftermarket.
Gaaaaayyyy
Check out our dyno day video
Why not just delete the Butterfly (center section) housing altogether? and maybe another alcoholic beverage too.
we did
you making stage. 1
+Giuseppe Randazzo I hate to say it but I'm not really sure.
We started with the idea to build a lemons car and then it turned into a Honda track day car. We plan on getting a full cage and fuel cell plus 5 point harness. So we plan on a solid build . Something to have fun with. We've always built our dailys but now we are trying to tow a car to a track and pretend to know something until we learn enough to actually know something. Lol
Put the phone down and do some work. You wore your helper out with all the talking
+mario alvidrez trust me I do. He just hates to film. So I'm stuck filming and when I'm working he's not filming and just chilling. He's my brother and it is his civic. Lol
Hahaha. No wonder he ordered two of everything.... He's your bro ! Sick. Wish I had one too.
I know this is old but you guys used the completely wrong bits lol you need tungsten carbide harbor freight has it the are 80$ for 4 bits you can't you that check shit it barely works
We ended up getting those too. Thanks for commenting and watching!
)))))
😀