My revs are fluctuating when driving and sometimes a slight shudder on my l320 tdv8. I think it will have the same gearbox yours has so gonna give it a go as its very hilly where i live so its very annoying 😂
Thank you for sharing. Unfortunately, the pipe is stuck solid to the radiator assembly. Tried taking off the air intake bit for access, but no amount of pulling will remove it. Any tips there?
hi i have a volvo v40 automatic gearbox shall i put 1 or 2 of these in the auto gearbox ? i am getting jerk when setting off and then between 1st and second gear, the rest of the changes are smooth its a 6 speed auto gearbox in my car. Thanks
I currently have revs bouncing when i let off the throttle, Which seemed to started after my gearbox pan and filter were swapped out. Is this the same method on the range sport 2.7v6 2007?...did this sort out any hunting or bouncing of revs?..might try it first before i swap out the torque converter...
Its a bit more difficult on my sport to do - so think i will get some and take to the garage and have them put it in and keep my fingers crossed 👍..thanks for the reply!
Thanks for the video. You’ve helped a lot of Land Rovers out out there.
Thanks. If anyone has a Landrover they need some help :) 😁
@@boatingsibbingandwandering3262 can I get it in south africa?
My revs are fluctuating when driving and sometimes a slight shudder on my l320 tdv8. I think it will have the same gearbox yours has so gonna give it a go as its very hilly where i live so its very annoying 😂
Thank you for sharing. Unfortunately, the pipe is stuck solid to the radiator assembly. Tried taking off the air intake bit for access, but no amount of pulling will remove it. Any tips there?
mine was like this, i just used a flat head screwdriver to apply pressure and pry it off gently
Hi I also wanna try it on my land rover discovery 3 but problem is am in south africa,can I get it this side?
Sorry I am afraid I don’t know the answer to that question
Hi. Is it a zf transmission you have there?
hi i have a volvo v40 automatic gearbox shall i put 1 or 2 of these in the auto gearbox ? i am getting jerk when setting off and then between 1st and second gear, the rest of the changes are smooth its a 6 speed auto gearbox in my car. Thanks
I currently have revs bouncing when i let off the throttle, Which seemed to started after my gearbox pan and filter were swapped out. Is this the same method on the range sport 2.7v6 2007?...did this sort out any hunting or bouncing of revs?..might try it first before i swap out the torque converter...
Yes it absolutly sorted out the problem. It is so cheap and easy to do
Its a bit more difficult on my sport to do - so think i will get some and take to the garage and have them put it in and keep my fingers crossed 👍..thanks for the reply!
Very good video!
@@boatingsibbingandwandering3262would you recommend just one tube or stick two in at once?
@@juanpablo-vn1xo Put 2 in at once
how is the transmission nowadays did the shudder return?
The shudder has not returned yet 🤞
@@boatingsibbingandwandering3262 happy to know that! Thanks for the reply
Just put 1 tube in. I will let it run round for a day or so then put the next tube in
Not a bad way to do it but the Disco 3 generally needs 2-3 tubes but I think you are doing it a good way