Это видео недоступно.
Сожалеем об этом.
How to Replace Downstream Oxygen Sensors 2008-2020 Dodge Grand Caravan
HTML-код
- Опубликовано: 15 авг 2024
- Buy Now!
New O2 Oxygen Sensor from 1AAuto.com 1aau.to/id/1AEO...
This video shows you how to install new downstream oxygen sensors from TRQ on your 2008-2020 Dodge Grand Caravan. The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.
This repair was done on a 2014 Dodge Grand Caravan SE 3.6L Mini Passenger Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
2008 Dodge Grand Caravan
2009 Dodge Grand Caravan
2010 Dodge Grand Caravan
2011 Dodge Grand Caravan
2012 Dodge Grand Caravan
2013 Dodge Grand Caravan
2014 Dodge Grand Caravan
2015 Dodge Grand Caravan
2016 Dodge Grand Caravan
2017 Dodge Grand Caravan
2018 Dodge Grand Caravan
2019 Dodge Grand Caravan
2020 Dodge Grand Caravan
Tools you will need:
• O2 Sensor Socket
• Ratchet 1aau.to/obYn/1A...
• Gloves 1aau.to/oaMs/1A...
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Why did you when replacing fist sensor took off from used catalytic converter and then put new one on new catalytic converter? Did you screw up treads on the old one?
There is a spec by dodge repair manual oxygen sensors are torque to 30 Ft-lbs on Dodge Caravans?
So why did you do this? Why didn't you change the upstream sensors?
hi guys! How many 02 sensors in the caravan (I have a 2015)? Are there 2 up and 2 down? I just watched your other video to replace the up streams and there were 2 sensors:
ruclips.net/video/rzAnTG1G8fI/видео.html
I just happened to see this downstream video and noted there are 2 sensors to replace as well, so 4 in total?
Thanks!
just want to make sure i buy the right parts and enough of them lol Thanks!
Did u usedid u just use used sensor or the same one to demonstrate?