Building a 383 Stroker Crate Short Block for a Chevy Silverado - Truck Tech S1, E11
HTML-код
- Опубликовано: 4 янв 2020
- The 350 in our 260,000 mile Chevy gets yanked out and replaced with a 383 Stroker crate short block, hot cam and new EFI.
PARTS USED IN THIS EPISODE:
ARP: Cylinder Head Bolts, High Performance, Hex Head, Chevy, Small Block, Kit
More Info: pntv.us/pn_pt_542_62d835e0e0903
ARP: Harmonic Balancer Bolt, Chromoly, Black Oxide, 12-Point, Chevy, Small Block, Each
More Info: pntv.us/pn_pt_545_62d83701f125f
Chevrolet Performance: Camshaft Retainer Plate, Steel, Chevy, 350, 2nd Design, 3.294 Bolt Center, ZZ3-ZZ4, Each
More Info: pntv.us/pn_pt_548_62d82d783881c
Chevrolet Performance: Harmonic Balancer, Internal Balance, Nodular Iron, Natural, 8.0 in. Diameter, Chevy, GMC, 5.7L
More Info: pntv.us/pn_pt_547_62d83719c1c0e
Comp Cams: Cam and Lifters, Hydraulic Roller Tappet, Advertised Duration 270/276, Lift .495/.502, Chevy, Small Block, Kit
More Info: pntv.us/pn_pt_551_62d82d71e0c4f
Comp Cams: Rocker Arms, Ultra Pro Magnum, Full Roller, 1.52 Ratio, 3/8 in. Stud Mount, Chevy, Small Block, Set of 16
More Info: pntv.us/pn_pt_550_62d8383e9aa82
Comp Cams: Timing Chain and Gear Set, Magnum Double Roller, Steel Sprockets, Chevy, 262/305/350, Set
More Info: pntv.us/pn_pt_543_62d837b4b51f6
Comp Cams: Valve Spring Spray Slipkote 6 Oz. Aerosol Can
More Info: pntv.us/pn_pt_552_62d8387faf7c4
Dupli-Color: Paint, Engine, Enamel with Ceramic Resin, Gloss, Black, 12 oz., Aerosol, Each
More Info: pntv.us/pn_pt_538_62d838069c3d9
Loctite: Threadlocker, 271, Heavy-Duty, Red, 36 ml, Each
More Info: pntv.us/pn_pt_533
Mallory Performance: Distributor, Max-Fire, Magnetic Pickup, Electronic, Vacuum Advance, Chevy, Small/Big Block, Each
More Info: pntv.us/pn_pt_555_62d836829f482
Mr. Gasket: Timing Cover, 1-Piece, Steel, Chrome, Chevy, Small Block, Kit
More Info: pntv.us/pn_pt_546_62d83858ec27c
Summit Racing: Crate Engine, Chevy 383 Stroker, Short Block, Each
More Info: pntv.us/pn_pt_540_62d82d8050aa3
Summit Racing: Cylinder Head, Vortec, Cast Iron, Assembled, 67cc Chamber, 175cc Intake Runner, Chevy, 5.7L, Each
More Info: pntv.us/pn_pt_541_62d835f1921db
Summit Racing: Timing Pointer, Billet Aluminum, Black, Adjustable, 8 in. Balancer, Chevy, Small Block, Each
More Info: pntv.us/pn_pt_544_62d83865c2d40
Summit Racing: Valve Cover Baffle, Aluminum, Natural, Bolt-In, Each
More Info: pntv.us/pn_pt_553_62d8386fd9189
Summit Racing: Valve Covers, Tall, Fabricated Aluminum, Clear Anodized, Centerbolt, Chevy, Small Block, Pair
More Info: pntv.us/pn_pt_539_62d83877a85e9
Blast-It-All: Magnum 4436 blast cabinet with reclaimer
FAST: EZ-EFI 2.0 Multi Port EFI Kit Small Block Chevy Up to 550 HP Inline Pump
Loctite: Loctite 5452 Fast Cure Thread Sealant
Matco Tools: MST4531 - Harmonic Balancer Puller/Installer
Miller Electric Manufacturing Co.: Miller Syncrowave 210 TIG Welder
Pacific Performance Engineering: Dodge 6.7L - Dual Fueler CP3 Pump Kit
Pacific Performance Engineering: Pre Complete Cummins 6.7L Race Engine
The Industrial Depot: Fasteners, Hardware, and Shop Supplies 
Авто/Мото
These guys are well organized compared to the others. Love the part on restoring the dent back to normal. He provided good information and was calm about it. Not in a rushed perspective.
"We didn't waste money, we just have to spend more." LOL
IKR..LOL
That truck looks real good way better than the 2020’s Chevys how crazy
I would take this truck over any new model. Back in 1999 I bought a 1995 GMC Sierra. It had 40,000 miles on it and other than a few cosmetic things it was basically the same truck as this one. I wish I never got rid of that truck and I'm sure I would still be running strong today.
11:28 use narrow body self-aligning roller rockers. I'm running a roller cam with 1.6 rockers and .550/.546 lift with the stock valvecovers.
I love what you all are doing with that truck.
My 1991 C1500 with a 350 and has never been rebuilt and has just under 319,000 miles and nothing wrong with mine!
I love this series of videos. I have always been in love with the 90s model Silverados. Great video guys.
I am working on building 383 stroker 1st gen for my 1977 GMC K25 Longbox Restoration. Swing by the channel to track it!
Looks so sharp with the new headlights and grille
nice setup. It would be low budget to me, but I see the other comments. I only see the crankcase breathing mistake.. but you mentioned it. Passenger side takes air in, driver side is the hot exit...that gets the pcv valve. you can make use of the classic looking air filter housing and remain the old school look. The rod ratio is very hard on the 383.. its an engine to keep rpms down like factory. I remember when it came out in a car craft article in the 90s. I had SBC in 3 different projects.. before the LS came out
I like the breather that was installed.
Such good looking trucks. Love that body style
1:42 popup The Vortec 5700 (L31) is actually a Gen I small block, so no it wasn't discontinued in 1996 but rather carried on until 2002. That's why the heads are backward compatible, while LS heads are not (pretty sure LT heads are not compatible either.) The Vortec designation often gets it improperly classified as a Gen III, when all the truck engines became known as Vortecs (5.3 etc.)
I stopped watching 2 minutes in when they said “GM discontinued the small block in 1996”
WTH is a 5.7 Vortec?😂
Man I was thinking the same thing lll
and they went to 1999 lol
He was talking about the TBI small block
Great looking truck guys. Thanx for sharing
The small comment about small blocks being discontinued in GM vehicles in 1996 is not entirely true. They were updated in 96 with a spider injector set, roller block and better heads. The small block Chevy was actually available up until 2003.
Austin James they still sell them as crate engines ..
Michel Linschoten Yes, but I mean they’re not still put in new vehicles.
Love the look, wish i had me one
YAY A NEW ENGINE BUILD !!
Just gotta love this show every sunday !!!
I wish Power Nation took my Silverado 2002
Truck for an upgrade !!
Glad you guys posted the video of the paint and prep on it.
Tristen1972 yeah I know right. I wanna see everything leading up until this point.
Tyler Thompson Idk how many different projects they have had on here that they just completely skip an episode and Im like “yeah, totally didn’t wanna see that or anything.”
I would love to have that engine to go in my 96 Tahoe but it would be a shame with my paint and electrical issues but with my Monster trans and completely rebuilt front and rear diff with this engine it would be a beast.
Our low buck truck isn't a low buck truck no more. Yay budget projects they do that's fit for the rich
Learn how to scam with that bolt under mount is crazy 😮😮😮😂❤
That is awesome. Now do that same thing in a Colorado. That would be a badass truck.
The problem with 350 upgrades has got to be the fact that LS motors are cheaper and easier to work with. The cost of the EFI system alone, $3500, is more than buying the LS engine and swap kit. In most cases, at least where I am, junkyard 350's are becoming more expensive than LS engines if similar mileage and age.
That being said, this is a cool build, and one I thought of pursuing but the EFI is the biggest barrier for upgrades to these trucks.
Yup unfortunately the ls bug is out and everyone knows now so prices for them are starting to go up use to be able to pick em up from the junkyard for $800 here now they range from $1500-$2000.
1:43 Actually 2003 was the last year that a small block was available in a GM vehicle. The Chevy Express/GMC Savanna were the last vehicles to offer a 350 Vortec.
The Black Car Guy was looking to see if anyone else caught that
He was talking about TBI small blocks not small blocks in general
My 94's block has just over 200,000 mile. Bout time for me to stroker.
Lol......"low buck"
Right?
Love this show . They make it sound so much fun. It real easy guy , just connect the 💰with stacks of 💵 inside of your very clean and well lit state of the art garage. I watch it every chance I get 😆
cliffdaddy126 , it's only $19.95 for everything , because Summit gives them everything for free , in return Summit gets free advertising , so if you would like free stuff just mention good ole boy Joe Bob junk yard on state route 3 in your nearest town , parts are free , shipping is $10,000 dollars , and they don't allow you to get the parts yourself
Midnight Trumptrain , just When was your last 383 crate engine purchase ? after you just rebuilt your truck including with an new paint job ? all of this is 5 to 7 grand depending on your location , and are they hiring at your job , we all want your high pay check like you get
Waylon Miller , that's cool that your Camaro runs outlaw class at the strip ,
but I kinda know what it is to by parts now and then because I have 2 Camaro's , 2 Nova's ,3 Chevelle's , 5 S-10 Truck's , 3 Chevy Trucks of 67 & 68 K-20 4X4 , 3 OBS trucks 89 , another 89 short bed with 350 and 5 speed , other is a 96 3/4 4X4 with 33 inch Superswampers , A 78 square body Chevy truck 2 wheel drive , A 77 Blazer 4X4 on 33 inch tires .
And my built 66 Chevelle Super Sport , with a built 327/450hp small block with 12:1 compression pistons , vette crank , ported heads, aluminum high rise intake,
750cfm carb , headers , HEI distributor ,Lakewood blow proof bellhousing ,11 inch heavy duty clutch , M-21 Muncie 4 speed trans , 12 bolt posi Trac rear end with 4:11 gears , traction bars ,
pulls front tires off the ground in first and second gear ,
5.5 sec@ 96mph in 1/8th
11.1sec@ 127mph in 1/4
I wonder what the color code is for the paint. Love that blue.
Man, in the future im thinking to build a C10 Drift Truck. I wanted to make an ls3, but here in Brazil (where i live) There arent any Ls ´s for sale. So, i think that a 350 small block or a 383 can be a good choice for me.
Love all the trolls, keyboard NHRA engineers, and Street Outlaws that show up here to comment. Let me break something down for you: we as car enthusiast should come here and support one another, and this channel. We are a niche culture and should appreciate Power Nation for giving us videos to enjoy and a place to get away from all the silly cat postings. Who cares if they put roller rockers on a stock engine or use sponsored parts on a car, just enjoy the fact that there’s a place for us car-guys/gals to gather and possibly steal some ideas for own projects.
GM had 5.7 in Van chassis up past 2000, maybe around 2002 ,...1996 they were getting good with the Vortec Head
The narrator always sounds like he wants to sell me Brawndo.
It has electrolytes
@@68madison LMAO!! -Exactly!!!
What plants crave
I like money
I could use a starbucks
Not low buck unless your a lawyer
He hit his hand on the new injection 😂
You know if they would have just put a 5.3 with a turbo in it they’d probably make more horsepower for cheaper and they’d save TONS on fuel😂😂
The audio and video is so crisp. Like it was recorded yesterday.
260k miles... psh it was just half way through its life....
Ikr
Heres how to fix a 350 tbi= work the heads, get a good cam, edelbrock performance tbi intake new gaskets and you're good
outstanding!!!
Beautiful paint job work truck engine bay
GM didn't discontinue the small block in 96, they discontinued it in the early 2000.
As far as the 5.7 vortec in chevy and gm trucks, the last year was 1999. In 2000, they used the 4.8 and 5.3 V8. The only vehicle that used the 5.7 vortec after 99 was pontiac and camaro.
I have 2 isuzu NPR 2002 trucks at work with vortec 350 so who knows when they truelly stopped mass production of them.
The change to Vortec heads came in 96, but it was still an SBC.
Awesome 😎
Can yall do an episode on how to upgrade the fuel system to e85 on the stock 350? Thanks!!
Accessory Drive?!?! Im putting a 406 in mine with tall valve covers. My stock 5.7 accessory drive brackets that Im trying to use will not clear the tall valve covers. What did you guys do to avoid this problem?
Just a breather,no PCV valve on the other valve cover? 🤔
I thought it was a game for a second😂😂
Ok, so where is the dyno run, what numbers will it produce?
So can u just buy a forged shortblock and swap everything over from your previous engine?
@POWERNATION Exactly which short block is that on Summit? The link takes me to several. Asking because that looks to have the correct D dish pistons for a Vortec build and would be definitely be interested in that.
I still have my almost new stroker 383, hyd roller, Dart heads & even though it only needs re-assy, (bearings / rings / gaskets, etc...) I can't justify the time & money when I can do a LS engine.... Maybe I'll put it in my 1967 Toyota Corona
hope they address how they dealt with the factory computer and speedometer interface, etc.
Phenomenal Truck !!! I love this era truck. Is there a company that could do this restoration for me or help me do it. Also, is there a company that specialized in rust free trucks like the one in the video. Thanks
Why’d they paint the original valve covers black and then switch to the brushed aluminum ones at the end?
I took the AC off of my 1985 Dodge and it still had a lot of charge in it which it surprised me because it didn't work
Why is there only one salve cover breather? Won’t the other side get pressure too?
"Make sure you don't nick the cam bearings on installation", leaves the cam hanging in the front cam bearing by the distributor drive gear.
What do you do with these vehicles after you guys fix them
This is awesome! I'm trying to figure out how to squeeze a 8 liter in my '06 2500. Seeing this gives me some ideas.
8.1 Chevy?
If you're talking 8.3 Cummins or some diesel, it can easily be made to fit but will require fab work obviously. Would love to see an 8.3 done tho as that's a goal of mine.
@@GreatLakesLogger 8.1 gas. For the cost of cramming in a diesel I'd be better off just buying that outright.
@@njineermike basically a bolt in swap, theres dude that does it
ruclips.net/video/9vr2j7Bv9Cs/видео.html
Folks, do not hang a camshaft off the front of the block by inserting just inserting the back journal into the front bearing. You may damage the bearing.
What would it take to fit a 383 stroker to replace my 5.3 vortec
2003 silverado 4x4?
Should drop right in I'm doing that on my blazer
Why did yall leave the clutch crank driven fan instead of upgrading to an electric fan(s)?
1:43 ...well heres a point they didnt stop using small blocks in 1996... chevy continued to put the small block in vans till 2003... suburbans/tahoes, trucks till 2000...
nice truck
I think most people watching this are not going to spend $2700 on a TIG welder.
That sand blaster is super old school and takes of too much material. Y'all need to try out a vapor blaster from vapor honing technologies.
I LOVE these engine builds but, my God...between the block and the upgrades, this engine setup must have cost $15-$18,000!!! Sorry guys, but I'd be stuck rebuilding the original block.
MrCrystalcranium I was gonna post exactly this. Especially for a “budget” build like was said in the intro.
Must be your first video here.... Every single time they say budget build that means their budget not a cheap budget lmao
Gas Mask lol man seems like it. I’ve watched about 20 episodes of it and I thought it was like a one time thing with what they thought was a budget. Then I see this episode and I’m like wtf.
These shopping list episodes are dull.
15-18k get out of here! That engine with FI may be around 6-7k max! How about you research prices....
Budget build? Riiiight.
That engine will live under 5000rpm and those Roller Rockers are a bit waste of money. Just use stock rocker arm that way you can use your valve covers.
Bro, this show is to sell you parts. Duh....
I'd rather rebuild the old one. Seems like more fun to me lol. And id just put a carb on it. Let er eat
I wish they would work on a 90s era f150
I would love to see how are you rebuild OK engine or upgrade the engine on a Chevy Tahoe early 2000’s to 2006 LT model
Dirt Murphy. Well said!
I finished a 383 kit on my Merc. I went from a top speed of 52mph stock to 82mph.
Jay RUclips please explain this
@@topkek7003 probably 3spd automatic with a 4.11 rear end.
Not sure what you mean, I’ll try to help. I had an 85 350 Mercruser buy GM (marine) out of mi Imperial. I sent the block to my machine guy and told him what I was doing, he knew what he had to do to the block. I ordered the kit from summer racing by the time the kit came, the machinist sent it back all ready. I along with a Nephew assembled it in 2weeks or so. Got 400+hp out of it. Hope that clears up a bit of confusion..
@@jayyoutube8790 so it's still in the boat. That makes so much more sense because it's a straight drive system no transmission to really speak of just forward and reverse
Steven Burks ya.. but I have a “IO”... I am running a Bravo 2 that’s good for 559hp. That’s the “inboard/outboard” that would be like a “transmission” for a boat. Just like a trans, for a boat you could call it. I have a built one to handle more HP too.
What is your definition of “low buck”?
Actually they stopped putting the 350 in production trucks in 99, but still offer it as a crate motor
Waiting for the dyno numbers
Do they have a video where they paint the truck ??
Camaro and Pontiac used the small block 5.7 vortec in their 2001 and 2002 cars before they stopped making them, and corvettes and pontiac gto used gen 3 ls1 5.7's. As far as the 5.7 small block vortec in chevy and gm trucks, the last year that they used it in the 1500 was in 1999. In the 2500 truck and van, they were used up until August of 2000.
Think about how much less it would be to do an LS swap and how much power it would make compared. These episodes are made to sell parts.
@Waylon Miller you realize price and quality/performance dont always go hand and hand. You're really showing your ignorance.
Love for you guys to build a monster Coyote and place it in a Ranger or s10
Theres an episode of them working on a cooling system for a coyote in a ranger
Javier C thanks 😊 that’s a fun sounding video
Anyone would put an LS on an S10 before a coyote.
Squid Usn I don’t think so
@@ripfletching well, unless a running coyote eng is free but then there's too much involved with the swap. There's a reason why the LS swap on any vehicle are popular. I guess, you've never heard any LS swapped mustangs.
Nice
I would like to see what you could do with a 2012 5.3 Vortec for a lot more power and durability.
Charles Holt the 2012 dont have the vortec Chevy discontinued the vortec in 2006
Just put an LS3 in it and and call it a day :)
id rather have a 383 stroker
they have the same power stock and the 383 sounds better
@@musclecarsdaily3020 well there isnt really such a thing as a stock 383 but an ls3 is a 6.2 and a 383 is a 6.3
both will make 550hp on pump 93
the 383 is gonna need a 210+cc head and a 240+ duration @.050 camshaft and an 850 with 3500+ stall.
@@KingJT80 never knew that, fyi your right about the ls3 being a 6.2 but its actually the older ones that are still the ls3, my 6.2 gmc sierra denali is an LT engine
@@musclecarsdaily3020 yeah we've moved to geniv now
Wouldn't it have made sense to completely clean and paint the engine compartment prior to putting that beautiful paint job down?
Figure on 3K for that fuel injection set-up. Must be nice too have unlimited funds.
I have a 93 k1500 blazer with 350 bor 660 what can i update that too
8:45 If this thread sealer is NOT used, with the engine potentially burn antifreeze, or will it just leak on the exterior of the motor. Sorry if this seems like a stupid question. Asking for a friend...lol
It will leak out of the head. It will not burn in the combustion chamber. The head gasket is a barrier between the combustion chamber and the rest of the head.
What color is the truck??? And that's a badass engine
Im picking up a 383 stroker crate engine with 536 hp and 483 tq for my 1983 GMC Jimmy
You probably should have done the engine before you painted it and cleaned and painted the engine compartment first!
What colour of blue is that
Do all these old school engines shown here get put in with an efi system anyways?
One giant commercial...……….. who needs that.
Hillbillys
Most of these "build shows" are just dressed up infomercials for parts companies. It's a decent bet they got all the parts for free which is why it's a budget build.
So what was you total cost on this build?
Can you post the paint code digging the color
Not a bad looking truck...for a Chevy. I'd drive that
Shaun Morin 90 and 80 70 probably the best looking trucks they ever made. Especially the 90s was perfect these trucks
9:59 Comp cam valve train protector? CPTDE creating problem that don't exist.
Yeah I thought that. Selling unnecessary stuff.
F165 What’s up BlackEricDenice
@@johnwilson1784 Sorry I missed the family reunion.
Gotta sell that old dusty stock.
Dyno? Dyno video? Dyno testing?