If the XDCPA10BT screen is blank, how to fix it with firmware

Поделиться
HTML-код
  • Опубликовано: 26 ноя 2024

Комментарии • 12

  • @Puttycudii
    @Puttycudii 11 месяцев назад

    Could you possibly make a video on it. I feel like other users would find it very helpful as well. Thank you for your help

  • @chipvaughn2074
    @chipvaughn2074 Месяц назад

    Muy issue is everything was working just fine for about a half a day now all of a sudden i have no volume like the unit or my phone has been muted only it hasnt been. Any suggestions?

    • @E-Tek-ug3zn
      @E-Tek-ug3zn  Месяц назад

      Let's assume that what you asked about is car audio. If there is no sound, there are many reasons, but if you are not familiar with electronics, one thing you can do is disconnect the car battery terminals and then reconnect the battery after at least 1 minute, and it may return to normal. Sometimes the cause is that the unit is frozen. Thank you

  • @jayscales2323
    @jayscales2323 4 месяца назад

    Can you tell me what tool I need for the update? I have the screen but it needs the update. What kind of cord would work? Thanks

    • @E-Tek-ug3zn
      @E-Tek-ug3zn  4 месяца назад

      Do you have an XDCPA10BT with the same symptoms as in the video? If you follow the video exactly, I hope you will be able to solve the problem.
      The tools you need are a 3.5mm audio plug with wire, USB stick and WinZip or winRAR.
      Winzip or WinRAR is used to unzip compressed files. Thank you...

    • @jayscales2323
      @jayscales2323 4 месяца назад

      Thank you, double sided 3.5mm?

    • @jayscales2323
      @jayscales2323 4 месяца назад

      ⁠​⁠@@E-Tek-ug3znAnd sorry to be a bother, do you mind sending a link for the WinRar or WinZip so i know which one exactly thanks.

    • @E-Tek-ug3zn
      @E-Tek-ug3zn  4 месяца назад

      Go to Google and search for “3.5mm audio stereo plug” and you will see pictures of 3,5mm audio plugs. If you look closely at my video, you can see the same audio plug as the picture posted on the Google site. thank you.

    • @E-Tek-ug3zn
      @E-Tek-ug3zn  4 месяца назад

      @@jayscales2323 I downloaded it a long time ago so I don't remember what site it was. If you search for “WinRar free download” on Google, you will find a link to a site where you can download it. Thank you.

  • @Puttycudii
    @Puttycudii 11 месяцев назад

    My touch screen doesn’t work I can’t touch

    • @E-Tek-ug3zn
      @E-Tek-ug3zn  11 месяцев назад +1

      In my experience, if the touch panel doesn't work, it's usually a defective touch panel.
      In some cases, if touch panel calibration is turned off, resetting device calibration will make the touch panel work in most cases. Setting methods vary by manufacturer, so please refer to the manual.
      If you follow the video above, the dual product works at more than 95%. Thanks...

    • @E-Tek-ug3zn
      @E-Tek-ug3zn  11 месяцев назад +1

      Make sure that the touch panel connector is in proper contact; connector contact failure occurs occasionally.