Shed Shop Makeover
HTML-код
- Опубликовано: 6 июл 2024
- Be sure to subscribe to my channel.
Hey Friends! Welcome
In today’s video I’m sharing with you my Ultimate Dream Shed Shop Makeover that took me a little over a month to complete. I built my 8’x12’ shed shop back in October 2012 on the rear section of our property. For many years I used it as a workshop and art studio. Over the past few years it’s become more of a storage unit than a workshop. So I decided to change that and turn the old workshop into an Ultimate Fab Lab Shed Shop. I had to do some repairs to the floor to make it more structurally sound. I added walls, and No I didn’t insulate, I chose not to, I live in southern California and our weather is usually nice. I heard a lot about why I should have insulated our Garage in the comments of that video and I know there will be some comments about it on this video. I’m still happy with my decision to not insulate. But feel free to tell me why I should have insulated the shed shop and my garage in the comments, I do love that engagement … After I added the walls with no insulation, I painted the entire shed with my Wagner sprayer. I mimicked the floors in the garage by paint the floors gray and adding paint chips then I added epoxy over the top. Huge thank you to American Green Lights for sending me their sleek and I changed out the lighting for more modern sleek lights from American Green lights big thank you to Jim. I changed out my old wood workshop tables for a white husky tool cabinet and a husky tool cart. I’m extremely grateful to Onefinity for sending me one of their refurbished CNC unit to play with. Also I have to give a huge shout out to Wall Control for sending me some of their metal pegboards and accessories for the shop. I’ve listed a few of the links to some of the items I’ve added to the Shed shop below. It took me 3 days to completely clean the shop out. I used a method of, if I was going to keep an item I took out, and then I also needed to get rid of an item, a one for one method. I would either sell the item, donate it, or if necessary toss in the trash. I was able to recoup a good amount of money from the item I got rid of, which I was able to put back into the shed shop makeover. This helped me to downsize the amount of items I kept and put back in the shop. The flooring repair job probably took me the most amount of time throughout this project. This Ultimate Dream Shed Shop Makeover took a lot of hard work and love and I’m extremely proud of how it turned out. I'd love to hear your thoughts on this video in the comments.
Be sure to follow me Instagram @Wood_Brain
Business Inquires contact: LinzZuelich@yahoo.com
Big Thanks to:
Thank you to my awesome husband @nobadtides on Instagram for all ways being an awesome supporter, and helped with the electrical and build outs.
Also huge Thank You to Wall Control for sending me their metal pegboard and shelving accessories. Be sure to check them out at www.Wallcontrol.com
Also huge Thank You to Jim from American Green Lights for helping me figure out the exact amount of LED lighting the shed shop needed.
Be sure to check them out at www.Americangreenlights.com
Also huge Thank You to Onefinity for sending me one of their refurbished CNC units and foldable stand to play with.
Be sure to check them out at www.onefinitycnc.com/
Also huge Thank You to Total Boat for always keeping me stocked with epoxy.
Be sure to check them out at www.Totalboat.com
Links to items in shop:
-Sound dampening tiles from amazon:
-Black tool cabinet from harbor freight:
-Husky tool cabinets from Home Depot
-Lighting from American Green Lights
-Tall white cabinets from Ikea
-Colored Strip lights from amazon:
-Wall Control Pegboards
-Total Boat Table Top Epoxy
-Rust-oleum
More info…
Camera Used: Canon GX7 Mark ii (not Sponsored)
amzn.to/35DWx6g
I edited this video myself (super proud) with Adobe Premiere Pro. I’ve learned everything thus far about editing via RUclips tutorials, and a little trial and error along the way.
Music:
All music used was from Epidemic Sound
1. 368 - Jobii, Dylan sits
2. Autumn Haze - West & Zander
3. Foicusing - Cushy
4. On the Key of Steel - Dusty Decks
5. Fly Shroom - Giant’s Nest Хобби
Lindsay this shed is all killer and no filler.
Thank you so much friend
🔹🙌🏼🔹 Wow!!! Huge transformation!! I love all of it!
Your the best!
Transformations like this are a lot of work, awesome job. I took my accessory building and stripped it back to 2x4s. New cement, electrical, insulation, drywall, painting, lighting. You can’t help but smile every time you go into your new space.
Can’t wait to see you put it to use.
That’s so rad to hear it’s definitely nice to see the transformation thank you so much for watching and commenting
The floor, those lights, this shed shop is BEYOND. Just gorgeous!🥰❤️⭐️⭐️⭐️⭐️⭐️
Why thank you so much friend
the DIY epoxy floor worked great! and im guessing way cheaper than the epoxy garage kits. thanks for sharing :)
Thanks friend, yep your right!
So clean! So modern! So beautiful!
Thank you so much friend
Super clean
Thank you so much friend
I love how you did your own twist on the epoxy floor. Way to go girly. Love your positivity.
Thank you so much friend
I absolutely love this. The rgb lights turned it up a notch.
Right thanks friend
beautiful transformation! great work
Thank you so much
That's splendid and rather inspiring!
Glad you enjoyed it
I’m so glad I found your channel - great stuff!
Thank you so much friend
Holy moley guacamole! That's a gorgeous job! Wow. 😍
Thank you so much friend
That’s just killer!
Well, Thank you so much friend.
yooo what a flip !
Right! Thanks friend!
Amazing workshop!
Thank you so much friend
Excellent repair of the floor and creating a level base; very important and something that sometimes gets missed. Also; can never have too many lights! I liked the bare strips on the roof supports for minimal effort to maximum effect. Well thought out workflow for phase 1; there is always improvements to follow, it's just the nature of making/crafting. Seeing the CNC fit into a shed was new for me, can't wait to see how it works out. Great project!
Thank you so much friend
This is what pure beauty is to me!
Wow thank you so much
Thank you for this encouraging video.. very practical, and such a neat outcome!
Thank you so much friend, glad you enjoyed it
SUPER TRANSFORMATION.
LOVED IT FROM THE GET GO.
HOW YOU TACKLE THE ISSUES IS FACINATING.
I LEANED A LOT.
AND REALLY ADMIRE YOUR WORK FLOW.
THANKS FOR SHARING.
DUKE
Thank you so much for watching Duke, glad you liked it and got some value from it.
What a wonderful transformation….WOW….
Thank you so much Patrick
Awesome job. What a makeover - and perfectly functional space now. Love it.
Thanks so much friend, I love the new space.
AMAZING !!
Thank you so much
Love your floor
Thank you so much friend
Very good job !
Thanks friend
I Love It! ❤
Thank you so much
It looks great, congrats!
Thank you so much friend
A beautiful shop is an inspiring one! You did an awesome job, thanks for the ideas!!
Thank you so much Stu!
Perfect!
Thanks friend
Love it! Have you ever thought about designing workshops for people? You have such a great eye, and both your shops are so well designed, with personal touches, and impressive organizational functionality! There is a RUclipsr Rachel Maksy that just moved into a new house and her future studio is in an outbuilding on her property. It would be so cool to do a collab with her and help her design her new work studio. She dabbles in everything from cos-play to makeup artistry, and spends a lot of time crafting, sewing, and creating. Her studio needs much help, and I think it would be super cool for you to help her design it! Just a thought, but she really does need help!
I
@@valarya Yes, but there's the power of the internet, eh? Totally different styles. It would be a fun challenge!
Wow thanks friend!
Thanks friend
I’ll definitely have to check her out thank you so much friend for the suggestion I definitely want to help out more and more people tackle their workspace/studios/garage so let’s see what 2022 has to offer!
What an amazing transformation
Thank you so much Paul
Spectacular work. High wattage quality 👍👍👍
Why thank you friend
This shed shop is awesome! I loved how it turned out!
Thank you so much friend
Wow!! Super nice job! Love how clean and simple everything is. Always amazing what you really can do with a small space.
Thank you so much friend
Your transformation videos are always such a pleasure to watch! Thank you for all the hard work you do! Everything turned out awesome !
Thank you so much friend
This is definitely a video I’m going to reference when I do my gunsmithing shop!! Awesome job!
Heck yeah! Love hearing that! Thanks for watching and commenting friend
Congratulations!! Is beautiful!!👏👏👏👏
Thank you so much Maria
I’ve only watched 2 of your videos and truly enjoyed you design; you got me thinking of shed designs; I live in Oklahoma so I would need heating and a mini- split ; but Awesome, I love it
That makes my day
Lindsey AMAZING! It looks so good! ❤️
Thank you so much friend
So good well done!!!!
Thank you so much friend
Lindsay, This is an excellent use of t his space. I love your attention to detail throughout the build. You definitely have plenty of light for any project build. I didn't see any dust collection. (maybe I missed it here in this video.) With the CNC, that is going to creaT a lot of dust.
All and all, a great space. I'm very excited for you in the future.
Thanks for sharing this build-out. Felix
Thank you so much Felix you’re correct I have not installed dust collection yet I’m looking into that… thank you so much for watching and commenting.
Looks fantastic. Inspires me to clean up my act. Thanks so sharing.
Thanks friend
The finished product looks very clean and professional. Tbh the before is more to my liking but I'm probably way outside of your target demo. The real takeaway I think is just your ultra competent and confident vibe and the way you absolutely owned this big project from start to finish. Inspiring stuff.
Thank you so much friend for your input, means a lot… glad you enjoyed it.
great video! Looks SO good!
Thanks Ben!
Very swish and snazzy!!!!👏👍
Thank you so much friend
This looks amazing.
Thank you so much Angie
It looks amazing! I am so inspired!
Thanks Heather
Great job with the Shed Shop revamp Lindsay. I have a small space that was a garden shed that I converted for my 3D printing and electronics projects which is a small area but it does the job.
Heck yeah friend thank you so much for watching and commenting. Keep me updated on your 3-D shed shop remodel.
Lindsay!! It looks amazing! You did an incredible job!
Thank you so much friends
Blow in insulation later. Cut a 4-inch hole in each wall bay, blow it in. Companies do this for retrofits. Yeah, you gotta hear it again: You did everything else right, and you shoulda’ put in the insulation. Great remodel though. Beautiful.
Good to know
Looks awesome!👍🏽 I hope it stays that white and clean👀
Same here!!!
Love the way you shared all the details behind fixing the floor and how there is a slope for rain water behind the shed. I want to be just like you 🥺 but more me obv
Also I like how you will describe what you are going to do, and then overlay clips of you doing it. Smart editing.
Your the Best! Thank you again friend!
Nice job lindsay I like how you rebuild from the ground up. The epoxy came out as well as the style. Look forward to seeing you use that cnc. Your edit was good to.
Thanks Shawn!
just found you’re channel and this was the first video I watch. Ummm WOW just wow! This is awesome and super jealous. (Even watched it normal speed which I never do lol) Just got my onefinity in the mail today! Can’t wait to binge watch some more video. Video itself was great too. I like you’re style😉
Thank you so much Scott good luck with your OneFinity be sure to keep me updated on your progress as well
Loooove it!
Thanks friend
I feel your pain with the insulation police! Never knew they amassed in such great populations on social media! LOL I bet 90% have never insulated anything themselves. :) That out of the way... DANG that's a sweet shop! I'm a Shapeoko snob so didn't know that OneFinity had a stand now. Very sharp looking! I completely understand why RUclips is promoting this on feeds -- this was an awesome transformation and very well done. Off to scroll your other videos!
Wow thank you so much Sam! Really means a lot! How do you like you Shapeoko? I’ve heard good things… thank you again for watching and commenting.
This is absolutely amazing! Just my 2 cents, you could absolutely break this video up into several videos to give yourself more spread out content. I know there's a lot of pressure on creators to have a whole space done, but this is SO much work and it's ok by me to just share sections of a space at a time. But seriously AMAZING video and such a dreamy space!!!
I like it when there's a full video, and there's a second vlog channel with more bts info with less polished editing, but agreed, there's a lot of content here.
Thanks friend
Thank you so much Shannon I like to try and get everything into one video but that is great advice I will definitely consider that for future videos thank you for watching and commenting I really appreciate it.
Awesome results and definitely a she-shed if I've ever seen one, the transformation was well worth the time watching 👀 and nodoubt will be a lot of pleasure to be working within 👍. Can you please tell me what the CNC brand is and how much it cost you? I'm interested in buying one for myself and my wife to share with my woodworking and her creative crafting as I think it will help with not only her business idea's going forward but also to give her the motivation for achieving her own goals 😊.
As always 💯 % 👍 🇬🇧.
Thank you so much friend I really appreciate it I have a Onefinity CNC and love it.
your cnc has an xbox controller? LOL cool, amazing job as always lindsay!
So cool right thanks friend really appreciate you watching and commenting
Love it! im jealous! what's under the other husky tool chest ?
My wood veneer collection and my airbrush machine, Thanks for watching and commenting friend
I swapped out two 8 foot fluorescent light fixtures out my shop / garage for LED. Such a huge difference. Its light daylight in my shop. I really hate fluorescent lighting and the buzz from the fixtures.
Like what you did with the shop.
Question: Did the epoxy on the floor make it slick when its wet - damp or is the coverage thin enough so the chips still have a bit of bite?
Thank you so much Bill I totally agree about switching to LED from fluorescent… I did a thin enough layer of the epoxy that the paint chips still stick through giving it traction so it’s not slippery and we just recently had some rain and I walked in with wet feet and had no problem.
I'm a bit late to the game but just found you. Organizing and cleaning is not my forte, but this is very inspirational.
I am curious though of you CNC set up, specifically the dust collection. Is the unit outside the shed or connected to your garage setup?
Thank you so much friend I really appreciate it I didn’t have a dust collector set up prior to this video which is why if the machine had not been run yet or surfaced but I’ve recently got a dust collector that I store underneath the CNC I am contemplating building a encasement for the top and bottom to help with noise but overall I’m happy with the dust collection that I have now.
🤤
I’m new to following you and what caught my attention was your shed makeover. Which brings me to my question, you seem to have a fair amount of tools in there so how much power did you run into the shed? And what size shed is that?
Hi Kevin thank you so much for watching and commenting when I built the shed many years ago my dad and I ran full electrical to the shed with GFI‘s it’s an 8 x 12 shed… glad you like it thanks again for watching
What are the dimensions of your shed and what size is your Onefinity CNC?
I really like the white white paint and now I know I need to do this to my shed. So much brighter.
Thank you so much friend, the all white is the way to go… makes everything so much brighter… my shop is 8‘ x 12‘ and my CNC is 4‘ x 4‘
What kind of wok do you do or business you have; for such designs ideals , is Thera link
What kind of dust extraction system are you using for the CNC? Looks smaller than 100mm
😬 I still have not set one up yet is there one that you recommend
Liked the lights. Do you have link to those led strips? I can't seem to find them.
They are from American Green Lights, chat with Jim he’s amazing and can help you with all your lighting needs.
I had the same question. Search for strips under shop. It also has the drivers she mentioned. Hope it helps! shop.americangreenlights.com/shop-for-products/ols/search?keywords=strips&sortOption=descend_by_match
What size CMC do you have; that’s perfect size for your shed; will you text me back; but everything looks Awesome, great job
It’s 4x4 by Onefinity
Hello!
What kind of cnc do you use? thanks
Hey there it’s a Onefinity CNC
Do you have a model number/link to the 2 drawer / open husky cabinet?
I got it off the Home Depot website let me see if I can find the model number for you and link I’ll put it in the video description.
How big is this shed? Awesome job!
8’x12’
Also thank you!
What led light strips were used?
They’re by American Green Lights… Link to their website in the video description
Know what ?
At the beginning of the video,
you have a dark blond dog matching the color of the wood panels.
I, like everybody, expect you to
- either dye your dog white at the end for him to keep matching the panel color.
- or have him an LED collar.
- ideally : both.
I’m confused 🤷🏼♀️
@@wood_brain please do not be.
I was only having a laugh.
Nice job really, by the way.
I apologize if I missed it but, how big is this shop?
No worries my garage shop is 20x20
Wouldn’t the epoxy floor crack since the wood can flex?
No issues as of yet but I’ll keep you updated
What happened to that back room you painting the beams
Still working on it…. That’s a definitely larger renovation
All I can say is…. #lifegoals haha
Thanks friend
Can you provide a link to the sound panels?
Links please!
I got them off Amazon link in the description
I would have put the tablet on a mounted arm, so it could be adjusted.
That’s a good idea
What size is the building?
It’s a 8’x12’ shed
What size is the shed ?
It’s 8’x12’
What size is this shed?
It’s 8’x12’
What’s the size of the shed
8’x12’
What are the dimensions of your shed?
It’s 8’x12’
Sorry; you listed it
is this a repost i swear ive seen this exact video before
I did a sped up version for TikTok and Instagram and they both performed very well, wonder if you saw it there
Please don't use the fast forward button normal speed is the best.
Thanks for the suggestion Randy I like to keep my videos fast pace to keep peoples attention but noted I’ll try slowing some sections down in the future. Thank you for watching and commenting
A deal pour epoxy would have been better
Never heard of it… thanks for watching and commenting
If you didn’t have those fingers and hand movements you wouldn’t be able to talk…
😂😂😂
LOVE IT!
Thank you so much friend
LOVE IT!!!!
Thanks buddy!
@@wood_brain of course!! ☺️