Check out our Version 2 Universal Swingout Tire Carrier build-it-yourself kit. It makes the build a snap! Click here to check it out. Kit, Anti-Wobble, Hinge, PDF Plans and More!: rathasochenda.com/shop/ In Part 1 of this video, I'm going to walk you through step-by-step on how to build Version 2 of the Universal Swingout Tire Carrier Build Kit (Hitch Mounted).
Video Chapters 0:00 - Intro of the Universal Swingout Tire Carrier Build Kit 4:43 - How to assemble and test fit the Anti-Wobble Assembly 18:42 - How to assemble the Auxiliary Hitch 23:49 - Installing the 45 Degree Offset Tube 28:40 - Installing the Support Back Bracket 29:05 - Calculate Fix Arm and Swing Arm Length 32:50 - Installing the Hinge DOM Tube 36:14 - Outro
Picked this kit up during black friday. Thanks for doing a sale! Planning to do a square tube for the support bar instead of round, so I can more easily bolt up a table on the back side for camping. Got the kit a couple days ago. Looking forward to fabbing it all up.
Didn’t even know they made a 3 inch receive. It’s a possibility for me to make one. Reach out to me on my contact page of my website and we can discuss it further
Does this kit only work for 4runner? I purchased the first version prints and the measurements were off for a Tacoma, but it was no biggie. Just had the make some of the measurements longer.
The kit is universal as long as it followed the guidelines reference on my website. You can also email me if you have a special case. What rig were you looking to use the kit for ?
@@RathaSochenda tire carrier for a Tacoma. I didn’t really have a problem with the version 1 prints. I just added a couple inches in the length of the swing arms.
@@ryangoldtooth7755 nice. Yeah the length in the plans was just an example I use for my rig. Each vehicle will vary in swing arm length so when I made version one I mentioned that in the video how to calculate it. If you go to my website I actual have some pictures of a 5th gen taco using v2 of the new tire carrier build kit.
Unfortunately not at this time. For now I just provide kits. Maybe try reaching out locally to fabricators and ask what it would cost in labor if you bought the kit and had them weld it up for tou
Check out our Version 2 Universal Swingout Tire Carrier build-it-yourself kit. It makes the build a snap! Click here to check it out.
Kit, Anti-Wobble, Hinge, PDF Plans and More!: rathasochenda.com/shop/
In Part 1 of this video, I'm going to walk you through step-by-step on how to build Version 2 of the Universal Swingout Tire Carrier Build Kit (Hitch Mounted).
Video Chapters
0:00 - Intro of the Universal Swingout Tire Carrier Build Kit
4:43 - How to assemble and test fit the Anti-Wobble Assembly
18:42 - How to assemble the Auxiliary Hitch
23:49 - Installing the 45 Degree Offset Tube
28:40 - Installing the Support Back Bracket
29:05 - Calculate Fix Arm and Swing Arm Length
32:50 - Installing the Hinge DOM Tube
36:14 - Outro
Picked this kit up during black friday. Thanks for doing a sale! Planning to do a square tube for the support bar instead of round, so I can more easily bolt up a table on the back side for camping. Got the kit a couple days ago. Looking forward to fabbing it all up.
🤘🏾
This needs more likes, really thoughtful design
Appreciate it
Bong Ratha, it has been a long time. good for you to be back 💪🙏
Yo! Glad to be back!
I bought the plans from you and I'm in the process of building one for my subaru forester!
Awesome 👏!
The color grading and lighting on point bro
Thank you!
Best info! love your built, learn a lot from your setup.
Thanks. Glad you pick up a few things from the build. 🤙🏾
Clean Work!
Thanks
Instructions so simple even I could build one 😂😉 Great work as usual, love that you have your own kit - can’t wait to see the next one!
Appreciate it 😍
I’d like to get this kit for my Ford Excursion. I need to take some measurements!
Sweet!
So perfect! Any chance of buying the Anti W receiver and auxiliary hitch all welded together, just to install and be ready to go?
Shoot me an email I might be able to help with this
Thanks to you budd you deserve it well explain as always and really professional
Appreciate it!
Great kit. I don't have welding tools. Is it possible to buy a complete one?
What most people have done is buy a kit and bring it to there local fabricator or family friend
You mentioned the Subaru lift gate when talking about the hitch mount, with a Crosstrek would I go high or low?
High (standard)
nice work ❤
Thank you!
Nice work. I'm curious if you could make an anti-wobble for a 3 inch receiver?
Didn’t even know they made a 3 inch receive. It’s a possibility for me to make one. Reach out to me on my contact page of my website and we can discuss it further
@@RathaSochenda I've got a Ford F350 and most of the one-ton and up trucks have a 3 inch receiver. Will reach out! Thanks
Sweet!
Thank you
Awesome!
🙏🏽
Got the plans off etsy just a while ago, is that one the same as this one or is it an older version, if so will the etsy one be updated?
Reach out to me and I can help via email.
@@RathaSochenda Thank you so much.
just curious; what are your MiG settings?
D4
Does this kit only work for 4runner? I purchased the first version prints and the measurements were off for a Tacoma, but it was no biggie. Just had the make some of the measurements longer.
The kit is universal as long as it followed the guidelines reference on my website. You can also email me if you have a special case. What rig were you looking to use the kit for ?
@@RathaSochenda tire carrier for a Tacoma. I didn’t really have a problem with the version 1 prints. I just added a couple inches in the length of the swing arms.
@@ryangoldtooth7755 nice. Yeah the length in the plans was just an example I use for my rig. Each vehicle will vary in swing arm length so when I made version one I mentioned that in the video how to calculate it. If you go to my website I actual have some pictures of a 5th gen taco using v2 of the new tire carrier build kit.
@@RathaSochenda How long are the arms that come with the kit?
@@ryangoldtooth7755 there arms you still need to buy separately from the kit
I have a question, Can you help to build something like this for an 08 Xterra?, I will buy it from you. I don’t have any welding experience at all
Unfortunately not at this time. For now I just provide kits. Maybe try reaching out locally to fabricators and ask what it would cost in labor if you bought the kit and had them weld it up for tou
@@RathaSochenda oh okay but what’s the cost of the kits?
@@olusholafarojoye3970 please check out the link in the video description for more details and pricing on the kit. Thanks
Where do you have the link to the kit? I can’t seem to find it.
rathasochenda.com/shop/ or in the video description
👍
🙏🏽
😎
🤙🏾