Josh is more than anticipated in setting up shop in So. Cal. Thinking that there are more than enough customers that would prefer this man to work on their vehicles. So very hard to find a reputable shop that won't gouge hard working folks that use their trucks daily.
I was wondering what metal supply you were headed to before you showed it. I shop at Industrial Metal Supply too but their Sun Valley store. The scrap bin has saved me many times!
Hey man, I support your channel. I’m just trying to figure out how you’re gonna thrive in California with the diesel regulations. I pray for the best for you and your family.
It's terrible out in Cali. Nobody should move here. The weather is horrible. The beaches are full of sharks. The woods are full of bears. Everyone should move out and spread the word that Cali is terrible. (End sarcasm)
@@danieljacobsen7196dude I don’t think IV laughed so hard. But this is what everyone thinks. Except right now we have a 22 ft great white circling the mouth of the umpqua River in wincheasterbay Oregon. People surfing like 80 ft away clueless.
So excited to have you back in cali! Rome wasn't built in a day an neither will your empire but perfection takes time! Ever need a fabricator, or mechanic always looking for more projects in palm springs area.
Nice! You have a sweet setup that's gonna work perfect for what you need it for, and you only have to walk 15 feet to work. Plus life is better with palm trees around anyway. win win win
Really cool to see good builders coming out our way, just sucks that we can’t get parts easy lol. Great job on the setup though, it’s going to turn out great
I am so glad that you got back to your family! It is good to be with those you love and to be with your kids. Best of the efforts to get a shop going, I know that you love to work on trucks and that you need the income. The Lord will open the doors that you need to go forward in life. I live up here in western Oregon near Roseburg. A little cooler than down there and wetter in the winter. LOL 😀
Lookin good my guy, hope you get set up with some good air flow this cali heat is somthin else ( lemoore) shes 105 by 9am dont cool off untill midnight lol
I would highly suggest putting two exhaust fans in the walls as high as you can with gravity dampeners. If you put it in the roof you have a bigger leak chance with moisture. If you are within 6" of the roof on the walls you are still pulling out the same hot air.
Im building out a shop near Sacramento its unbearably hot in those buildings i spray foamed all the corners then used ridgid foam with a radiant barrier behind it and 10 tons of ac to make it comfortable
I usually weld nuts inside caps welded to the bottom of the legs that I thread 1/2" bolts into so that I can adjust the feet to compensate for less than flat floors.
This is awesome Josh! Looking good and best thing is the family is with you brotha! Wish nothing but the best for y’all and the business. Get a hot line set up bro I would have gladly paid for the diagnostics you helped me with for my valve on the 5th GEN dude!!
Hell yeah bro! So happy for ya, bet the wife and kids are happy to have you home with them. Your work speaks for itself, you won’t have any issues getting things up and running. And I’m sure your customer base is already there. Btw, your content and our lil chats have helped me tremendously so if there’s anything I can do to help you out in return from across the country don’t hesitate to ask…. Just moved from Texas back home to Michigan myself so I know the feeling of pressure and trying to get life back on track. But on the plus side…… I’m just a hop skip and jump from firepunk now and hsp is literally 45min drive. But I’ll still support you and order as much as I can from you. Also check your messages 😂😂😂😂 on your other platforms bro. Needed 625s in a hurry, just bustin your balls man I know you’ve been busy. Hmu when you got some time though!
Hey there are screens that will enclose the garage when the garage door is open that you can put up to keep the looky-loos at bay. Most are split in the middle and held by magnets. Super convenient. Foam board the walls and roof on that shop. It's going to be brutal in the summer time.
Hell Yea!!!! Love the garage setup and can relate, i do the same with Fab and Cummins stuff. I want to get my 47 done by you, im in the riverside area as well and if you need anthing at all! id love to help out. I have a 47 trans ready to go and some PDD parts that ill send your way for sure!!!!! Im trying to get to Diesels in the mountains again this year and would love to hit the dyno!
Not trying to be THAT GUY (tho I probably am - sorry), just more for the next project, always cut your longest pieces 1st, that way if you mess up, you can turn longer pieces into shorter ones...if you start with the shorties & mess up 1 at the end, you may not have enough left over to correct the mistake. Anyway, love the content...it won't be soon, but I hope to be 1 of your tranny customers (got my 1st diesel - '06 Cummins). Cheers & good luck on the shop build!
You should do a meet up. maybe a diesel trucks and coffee or some kind of daily driver drag race or something. donuts and donuts... or if you want to have a work party. I'll grab my gloves...
@@horsetorquesdiesel well when you are up and running. I need some head studs and new exhaust manifold( mine is cracked where the egt probe was tapped). I would like to get either a bigger turbo or compounds. Can’t decide my brother likes his but working on it makes it a little tougher. But anyways glad to see your stuff is coming together.
hey brother me and my dad have been fans since you were with PDD, We live here in the Hesperia California, I have a third gen cummins with some transmission problems, If you need an office or anything with carpentry let me now materials and labor completely free of charge I am a framer so feel free to reach out.
Spray foam insulation and a cheap mini split would keep that shop 70* year round.... No amount of fans or swamp coolers will keep it from being miserable as it is.
Should have set up shop in AZ...Cali is WACK!! Also skip the swamp cooler and throw a 3 ton mini split system in the shop. they are cheap to buy and cheap to run
I got a question about injectors. 2014 Ram stockish but have an injector starting to stick. Thinking about getting a set of industrial injection remans. Do you think thats a good idea?
Josh. How would I contact you if I don't have facebook, tic tok or IG. RUclips and Linked in are the only socials I got. Im close to you and need my 48RE ready for motor upgrades. Thanks
Josh is more than anticipated in setting up shop in So. Cal. Thinking that there are more than enough customers that would prefer this man to work on their vehicles. So very hard to find a reputable shop that won't gouge hard working folks that use their trucks daily.
Appreciate the kind words
Kids are the hardest job of all time I can verify that I have 5 kids. It’s constant work.
I'm glad you're home with your family buddy. 👍🏼
Thanks!
Hell Yeah Brother 🇺🇸🦅
I got a common rail 07 because of this channel, will try to build my 48RE on my own.
Do it! Not super hard and I have several videos for you to watch!
I know its tough. Having to organize but keep going you got it. I really glad i found your channel
Welcome aboard!
Right on man it’s good to see you back out west again
Looks nice!
I was wondering what metal supply you were headed to before you showed it. I shop at Industrial Metal Supply too but their Sun Valley store. The scrap bin has saved me many times!
Hey man, I support your channel. I’m just trying to figure out how you’re gonna thrive in California with the diesel regulations. I pray for the best for you and your family.
Just fine. it's not as bad as the world thinks it is
It's terrible out in Cali. Nobody should move here. The weather is horrible. The beaches are full of sharks. The woods are full of bears. Everyone should move out and spread the word that Cali is terrible. (End sarcasm)
@@horsetorquesdiesel Unless you need a gas lawnmower 🤣Just playing around haha.
Come to Oregon. We hate emissions. And when I say Oregon I mean anywhere but Portland Salem area. Washington can have them and the problems.
@@danieljacobsen7196dude I don’t think IV laughed so hard. But this is what everyone thinks. Except right now we have a 22 ft great white circling the mouth of the umpqua River in wincheasterbay Oregon. People surfing like 80 ft away clueless.
So excited to have you back in cali! Rome wasn't built in a day an neither will your empire but perfection takes time! Ever need a fabricator, or mechanic always looking for more projects in palm springs area.
Yes! Thank you!
Nice! You have a sweet setup that's gonna work perfect for what you need it for, and you only have to walk 15 feet to work. Plus life is better with palm trees around anyway. win win win
That's the plan!
Glad to see your home Josh, two can do what one can't!
Really cool to see good builders coming out our way, just sucks that we can’t get parts easy lol. Great job on the setup though, it’s going to turn out great
Someone could make a lot of money transporting from somewhere like AZ and going into cali tbh
I would love to work at home. Sleep well and make a good cup of coffee. 😄
It’ll be hotter than the hubs of hell without airflow bud…
That's why we have a rear door and putting in fans!
congrats!!!!
That’s what I’m talking about hopefully I can bring my truck to you to get work done.
I am so glad that you got back to your family! It is good to be with those you love and to be with your kids. Best of the efforts to get a shop going, I know that you love to work on trucks and that you need the income. The Lord will open the doors that you need to go forward in life. I live up here in western Oregon near Roseburg. A little cooler than down there and wetter in the winter. LOL 😀
Eh definitely more of a hobby, just interesting projects.
Lookin good my guy, hope you get set up with some good air flow this cali heat is somthin else ( lemoore) shes 105 by 9am dont cool off untill midnight lol
It's rough out here
Great idea "seasoning" the top.
I would highly suggest putting two exhaust fans in the walls as high as you can with gravity dampeners. If you put it in the roof you have a bigger leak chance with moisture. If you are within 6" of the roof on the walls you are still pulling out the same hot air.
Great suggestion thank you
You are a man with a solid plan
Supposed to get a lil toasty next week 🔥 but that's all part of it
Also great job sir! Ive learned some things from you for sure, so i appreciate ya!
Im building out a shop near Sacramento its unbearably hot in those buildings i spray foamed all the corners then used ridgid foam with a radiant barrier behind it and 10 tons of ac to make it comfortable
Appreciate the insight
The company you got supplies from great company I have done business with them several times over the years
Great people
I usually weld nuts inside caps welded to the bottom of the legs that I thread 1/2" bolts into so that I can adjust the feet to compensate for less than flat floors.
Later I will once we move it
This is awesome Josh! Looking good and best thing is the family is with you brotha! Wish nothing but the best for y’all and the business. Get a hot line set up bro I would have gladly paid for the diagnostics you helped me with for my valve on the 5th GEN dude!!
No problem man
Hell yeah bro! So happy for ya, bet the wife and kids are happy to have you home with them.
Your work speaks for itself, you won’t have any issues getting things up and running. And I’m sure your customer base is already there. Btw, your content and our lil chats have helped me tremendously so if there’s anything I can do to help you out in return from across the country don’t hesitate to ask…. Just moved from Texas back home to Michigan myself so I know the feeling of pressure and trying to get life back on track. But on the plus side…… I’m just a hop skip and jump from firepunk now and hsp is literally 45min drive. But I’ll still support you and order as much as I can from you.
Also check your messages 😂😂😂😂 on your other platforms bro. Needed 625s in a hurry, just bustin your balls man I know you’ve been busy. Hmu when you got some time though!
Dude the messages just pile up its overwhelming most days
Hey there are screens that will enclose the garage when the garage door is open that you can put up to keep the looky-loos at bay. Most are split in the middle and held by magnets. Super convenient. Foam board the walls and roof on that shop. It's going to be brutal in the summer time.
Thanks for the tip!
@@horsetorquesdiesel Yes sir!
Congratulations!
Shop build is always good content 👍🏽…Big Ass Fan Company might have what you need…Aloha🤙🏽
Heck ya
Hell Yea!!!! Love the garage setup and can relate, i do the same with Fab and Cummins stuff. I want to get my 47 done by you, im in the riverside area as well and if you need anthing at all! id love to help out. I have a 47 trans ready to go and some PDD parts that ill send your way for sure!!!!! Im trying to get to Diesels in the mountains again this year and would love to hit the dyno!
Let's get it dialed in
Why not do a 304 or 316 stainless top to mitigate any rust? Little more expensive but also way easier to clean and looks good
Thats awesome I love putting together Allison's. probably more simple than 48res. 48s aren't bad but they definitely ain't for the faint of heart lol.
They look simpler
@@horsetorquesdiesel definitely are
Keep it up
Nice seems like you have it all planned out hope code enforcement doesn’t get any calls
No we should be good
Not trying to be THAT GUY (tho I probably am - sorry), just more for the next project, always cut your longest pieces 1st, that way if you mess up, you can turn longer pieces into shorter ones...if you start with the shorties & mess up 1 at the end, you may not have enough left over to correct the mistake. Anyway, love the content...it won't be soon, but I hope to be 1 of your tranny customers (got my 1st diesel - '06 Cummins). Cheers & good luck on the shop build!
Nah you are right 😂 didn't think that hard
You should do a meet up. maybe a diesel trucks and coffee or some kind of daily driver drag race or something. donuts and donuts... or if you want to have a work party. I'll grab my gloves...
Diesels and Coffee sounds bitchin!!
May have to look into that!
Id be down to make a trip south for a meet up. 💯
@@rowdykrowd435 Where are you coming from?
@@witcher71 based in lemoore ca
Wheres the new t-shirts Horsetorques Diesel - OnlyTrans ?
🤣 that's a great idea
Awesome! How far are you from Vegas? I wouldn’t mind bringing my 05 to you for work. To have someone who knows what they are doing is worth a drive.
3ish hours
@@horsetorquesdiesel well when you are up and running. I need some head studs and new exhaust manifold( mine is cracked where the egt probe was tapped). I would like to get either a bigger turbo or compounds. Can’t decide my brother likes his but working on it makes it a little tougher. But anyways glad to see your stuff is coming together.
That's where I go
A we will hook up one of these days Josh you know where I live
A you ain't that far from me
Awesome man, love the content! What is the sheet thickness for the table top?
1:8"
👍💪
hey brother me and my dad have been fans since you were with PDD, We live here in the Hesperia California, I have a third gen cummins with some transmission problems, If you need an office or anything with carpentry let me now materials and labor completely free of charge I am a framer so feel free to reach out.
And if you ever need any help around the shop I’d love to work on the trucks I have my own mechanic tools
Appreciate it man! May hit you up in the future
Spray foam insulation and a cheap mini split would keep that shop 70* year round.... No amount of fans or swamp coolers will keep it from being miserable as it is.
Should have set up shop in AZ...Cali is WACK!! Also skip the swamp cooler and throw a 3 ton mini split system in the shop. they are cheap to buy and cheap to run
I'd rather be in California than Arizona as crazy as that sounds
Hey man I have a 2017 ram I’m at 90k I want to put some work in my trans before it starts to give me problems stock truck just banks Parts on it
Valve body for sure!
No, joke. I thought it was all a long drawn out April fools joke. The closing and the move....
Josh how can I get ahold of you I would be honored if you could work on my 6.0
I got a question about injectors. 2014 Ram stockish but have an injector starting to stick. Thinking about getting a set of industrial injection remans. Do you think thats a good idea?
Ddp is what I recommend shoot me a message on IG Justacommonrail24v and I'll get you going!
Great building your own shop,but please bro!!!invest in fire protection!!dont find out the hardway!!like I did!!
On it!
Those California Huffers always screw thing up for everyone
Where are you located for the trainny building ?
Think he said Riverside in the beginning
Riverside CA
Ultimate 6.7 long block price?
you moved to southern cal?? i've got some trucks for you!!
Let's go
My I asked where you picked up welding. I want to learn bit don't have time to go to school. Plus not really trying to make a career change
Go back to the beginning of his videos, when he worked for Power Driven and you can watch him progress with welding.
MiG stick as a kid. Tig self taught
Josh. How would I contact you if I don't have facebook, tic tok or IG. RUclips and Linked in are the only socials I got. Im close to you and need my 48RE ready for motor upgrades. Thanks
Email mccormack.joshua@yahoo.com
Hit up Dmaxryno, trade some work out truck for construction
We all know he moved for the denser air. But he missed the boat. Oregon has no emissions. And Portland should just not exhist.
I really like what you are doing,but y the f..k calfana???
Family! So far loving it
How we get in Touch with you?
He said right at the end Insta, Tik tok, FB mesg, etc. to contact him.