JBL E65BTNC Wireless Headphones Teardown, Dismantle, Battery Replacement, Repair
HTML-код
- Опубликовано: 20 апр 2021
- In the end I've replaced the BMS circuit protection IC and everything was fine.
Unfortunately I don't have the necessary equipment to film under my microscope (optic analog).
If you like my videos please subscribe!
Subscribe even if you don't like for the heck of it!
Also comment your opinions and social and political views and argue with the people who comment regarding the video!
#JBL_E65BTNC #teardown #Wireless_Headphones #JBL #E65BTNC 
Хобби
Thanks to you I was able to fix mine it won't start and before that the buttons didn't work but I was able to fix both problems 👍😊😎
Thanks to you.
Very impressive and so resourceful! Thank you for taking the time out for us clumsy clueless idiots!
Gald you like it! Nothing that I like more than to brake my stuff for you guys here on RUclips 😅
very much agree LOL
Bro your the only idiot here 😂...
Tnx mate!
I got to the 06:54 point myself with E500BT.
It was time for YT help when I discovered battery isn't there... :D
=)))))) you can actually see that the video skips a few frames. That is the point where i paused and searched the internet. =)))
Average experience with hidden screws and enigmatic designs : “ Oh … not again” 😂😂😂
Tip for getting the ring of without scratching it too much, I found that the only thing I could vedge in there was a used razor blade and the work my way up with my other tools. Be careful not to cut yourself tough! Probs to JBL for such a perfect fit, but it's a bit of a pain to repair.
Buen video mis audífonos solo estaba despegado el parlante gracias
You can use a low heat gun (used for de and soldering ) to loosen that ear section
Изьял динамики. Купил за 9-10$ hoco w40. Переставил аккамулятор и динамики, а jbl выбросил 😊 Теперь bt 5... с минимальной задержкой, type-c и шикарный звук! Спасибо за видео разборки!
Hej there. My headsets (same as yours) dont start just a white blinking 2 times and make a clicking sound and turn off any idea on this problems. Treid to do a hard reset but nothing.
Thank you for the VIDEO!.
Something that worked for me, was:
1-Remove the RING of the left side.
2-Remove the Phillips screws.
3-Partially move out the cover to see the battery and remove it (without the need for the German triangle weird screwdriver)
4-Test the battery (it was working!, if not, you can buy another one)
5-Reconnect the battery.
And the headphones came back to life.
Thnx. Short and concise... Unlike my video 😂
Thank you for the description @MarcosRamirez66, and for the video @catalinfix840. Instead of the triangle screwdriver, - if you are careful, a T5 torx can be also used.
My question: do you know, where could I order a replacement battery (with the electronics) for the jbl e65btnc? Thank You!
@@g.bencegorog5818
Did you find a supplier for the Battery?
@@Jehoov3r unfortunately not (yet). My plan for the future is, that I buy an other battery type wit similar capacity and two cables, and try to solder the connector.
But in my case, I had luck: a short circuit on the two soldering points has resetted the electronics, and afterwards I can use my headphones again.
Cable on the left side ist broken. My battery ist okay. If you are from Germany you can have it.
You can’t change the cable and therefore I will scrap the whole headphones 🫤
I would bet that battery has low voltage protection which has disconnected battery. You could charge directly the battery to revive it.
Can you make a video on volume control repair
bro the black wire connecting two cups of headset broken how should i repair it??
There was no battery in mine and no port for it either. Weird
Kai se ho bhai
I got my JBL55BT broken on the Right Side, no audio sound come out from the speaker, but bluetooth, left speaker still work normal. How Can I fix the right speaker to get back normal?
same thing here
Sorry for my late reply. Yes it seems like it's just a connection issue, a bad wire or a blown speaker. It happens a lot with these kind of headphones. Nevertheless it's the same procedure as in the video if the connection is bad at the "brain" in the left housing.
My Headphones when charging the red light is only blinking. And when I turn them on they won't turn on. Any idea how to fix them ?
It looks like a bad board or battery, unfortunately. Basically just like in the video.
HI I HAVE A JBL E65NTNC THE PROBLEM IS ON THE EAR FOAMS IT WAS ALREADY TEAR UP. CAN U PLEASE HELP ME HOW TO FIX IT
you can find spare foam for sale. Also the dismantle process is the same.
My JBL650 BTNC noise cancellation keeps turning on and off on its own non stop
most likely the switch went bad
My JBL65BTNC switches on but you can’t find it when you search for it, anyone know how to fix this
Sound like the Bluetooth Module is fried or the antenna got disconnected. Try to hold the headphones next to your phone.if it works than check the antenna
@@catalinfix840 thank you 👍🏻
Hi I got an E45BT headphones and the left side stopped working. I opened it up and found out that there is a battery on the left side. I don't have plans of opening the right side since it's still working. Could it be possible that both sides have batteries or the battery on mine is just placed on the left. Thanks!
There is only one battery.
not a smart person breaks without looking into how to open... the case of the headphones, and how to access the battery. It's a pity to see a person looking at you...
This quality is ridiculous.