Yes!!! At last!!! :D I tried to design my planes in fusion 360, however there's too much BS options and it focuses on mechanics rather that simple design :) As for blender - it always scared me, but I knew that's the proper way to do it ;) Thanks for adding this tutorial, love the calm and simple way you describe all the steps - can't wait for part 2 :)
Great modelling. I'm a Mechanical Engineer and familiar with Solidworks, AutoCAD, CATIA, CREO, Inventor. My preference is SOLIDWORKS and easier for me to use. But the procedure is similar from software to software. I forgot to mention that you are BRILLIANT!!!!!!
@@JuliusPerdana Professor Perdana, Have you tried using Plastic Corrugated Sign Board for Assembling Models? I'm going to give it a shot for the Sky Arrow using your plans.
I gave a like to the video after a minute of watching And every few minutes u explain something that makes modelling easier for me, i move my finger to give a like just to find that i already did that 😅.
I’ve been learning blender for a year and half now and playing with rc planes about the same tome I’m trying to dive into this rabbit hole! Subscribed!
I'm going to do my bit n try to get you upto 100k Juli bruh... I think what You've done bringing RC Aviation to into the 21st century is to be commended with the introduction of New materials, better electronics n of coarse gifted model makers such as yourself.. Yes 100k is the goal n as many shares n reshares as possible... Well Done n Good Luck 👍 👏 👌
Hi Julius, Once you have completed your Blender plans, how do you export it to print. How do you adjust the size for printing it large? Adding the cut lines, etc? Thank you for your great work! Very innovative!
This is pure gold my friend!!! i will save it for the rest of my life. So many times i try to make my planes like this, but i allways have issues with the mirroring . I think i will have to give it some time to learn how to use this software.- Thanks a lot Julius!
Thank you very much for sharing your talents and knowledge. 🙏. I could not find part 2 , can you please provide the link ? Second question , do u have knowledge how to build the motor and remote control from scratch ? I am really interested in that too
Brilliant, very informative giving an insight into this fascinating world of digital design. I have learnt a huge amount from this Julius thank you for sharing.
Been waiting for this video, looks like quite a learning curve involved but I will have tutorial running on tablet as I work with blender on my laptop, time to get practicing, you've opened a whole new world of modeling, thank you so much Julius 👍👍👍
I use Blender just for modelling. It's free, so many can have it, but for converting to 2D plans I use Pepakura Designer, so it doesn't have to use Blender, in fact you can do this on any other 3D modelling software.
yes you can, many use it for animation. My approach on making this 3d model is as simple as possible, utilize flat surfaces as many possible for easier building with foam sheet, so for animation I think this model still too simple.
@@JuliusPerdana One thing on the flaperons, on the full scale they are in two sections and the out board section is up 3 degrees this allows the wing to be built flat with out wash out. And yes the horizontal is an upside down airfoil, when the airspeed drops below 35mph it takes every bit of it of elevator.
hey you might check out Herry's channel ruclips.net/channel/UCHWp4jixSuebMGx_kzYyj9A he built a Zenith 750 from scratch and is also in Indonesa about 2 hrs outside of Jakarta.
@@JuliusPerdana ok ,but can I still use blender to create the rc plane and then bambu slicer to print ...or could you tell me how you do it ,or mabye you could make a video on how to ...etc .thankyou
Please show us the process of unwrap the 3d model and prepare for A4 size print! I have been following you since 2 years, already build so many models and I always write your name on my rc planes!
Julius are this 2 programs free? I have been wanting to design and build an Airtractor 301. This video was very informative and a great step for start thinking about the build.
Titip sendal sebelum rame yang mana Gus Humaidi diberikan modal uang 50 jt untuk mengembangkan pesawat terbang yang katanya model pesawat nya dari channel RUclips ini.. Semoga mas Julius Perdana dilirik juga oleh Pak Erick Thohir agar semakin semangat mengembangkan apa yang sedang di kerjakan aamiin 🙏
![How To Start Designing RC Airplanes in Fusion 360 Tutorial [Episode 1]](/img/1.gif)
Design Tutorial part 2 is already released : exclusive to member ruclips.net/video/WvU86s3nWIs/видео.html
will it be available for everyone in the future?
Julius, has your channel been hacked? I received a suspicious message on my YT notifications..
@@noroardanto what happen? I dont know about that
@@lamtungle5510 Don't worry all is good now.
Yes!!! At last!!! :D I tried to design my planes in fusion 360, however there's too much BS options and it focuses on mechanics rather that simple design :) As for blender - it always scared me, but I knew that's the proper way to do it ;) Thanks for adding this tutorial, love the calm and simple way you describe all the steps - can't wait for part 2 :)
you are welcome
I used to design using Sketchup when it was free and then moved towards Fusion with frustration. After this video, I believe Blender is a way to go.
@Matjey Vlog how to convert model to 2d plans
Akhirnya tercerahkan hari ini oleh mastah KAI yg sesungguhnya..
Terimakasih mastah ❤🙏👍
Thank you Julius! You are the Best Teacher! Respect from Siberia!
My pleasure!
I have been keenly waiting for this video Julius
Very usefull , thk you, waiting the next part, Sir.
It must be difficult to make a light wood plan. I hope to see the teacher's tutorial on this aspect. Thank you for the design shared by the teacher.
it's not hard, I'm just not using balsa wood for making RC plane
Terima kasih julius...bertahun sy mncari tutorial modelling rc plane...sangat membantu...semoga cepat keluar part 2...makasih om julius
Great modelling. I'm a Mechanical Engineer and familiar with Solidworks, AutoCAD, CATIA, CREO, Inventor. My preference is SOLIDWORKS and easier for me to use. But the procedure is similar from software to software. I forgot to mention that you are BRILLIANT!!!!!!
Thanks for sharing!
@@JuliusPerdana Professor Perdana, Have you tried using Plastic Corrugated Sign Board for Assembling Models? I'm going to give it a shot for the Sky Arrow using your plans.
@@garyhilson7220 I don't know never try it, it will be heavier but I believe it can still fly, but you need 35 motor and 4S battery
@@JuliusPerdana What do you mean by "35 motor"?
Nevermind, I just Googled it
Wow! Finally it's here. Thanks Sir Julius!
Welcome!
Amazing thankyou can't wait for part 2 , great job.
Design Tutorial part 2 is already released : exclusive to member ruclips.net/video/WvU86s3nWIs/видео.html
@@JuliusPerdana how to be an member?
Yup, this might be beyond me but it sure is worth a try. Thanks Julius! Great video.
Any time!
Excellent tutorial! Terimakasih om Julius
Love Blender 3d modelling software..thanks Julius for this tutorial😊👍🏼
Fantastic Julius. Very helpful for me. Thank you. I stay expecting for the next chapter.
Congratulations for the videos Julius ... what a job hemm !!! could you make an F4 Corsair and if possible with a folding wing?
ruclips.net/video/m2hAPdylv6A/видео.html
I gave a like to the video after a minute of watching
And every few minutes u explain something that makes modelling easier for me, i move my finger to give a like just to find that i already did that 😅.
you are a lifesaver. thank you very much for the tutorial. When is the second video coming?
Coming soon!
What a video! Thank you so much for sharing your knowledge. Best Regards from New Jersey. Waiting for part II :)
So nice of you
This is incredibly helpful. Thank you so much!
Glad it was helpful!
Hi! This is a great tutorial video clip! I will design my next RC plane by this way. Thanks a lot from Japan.
I’ve been learning blender for a year and half now and playing with rc planes about the same tome I’m trying to dive into this rabbit hole! Subscribed!
Thank you so much for everything you have taught me so far.
You are so welcome!
I'm going to do my bit n try to get you upto 100k Juli bruh... I think what You've done bringing RC Aviation to into the 21st century is to be commended with the introduction of New materials, better electronics n of coarse gifted model makers such as yourself..
Yes 100k is the goal n as many shares n reshares as possible... Well Done n Good Luck 👍 👏 👌
woah, thanks man! Appreciated 🤗
How have I not seen your channel before?
Thanks for sharing this awesome content ✌️☺️
Glad you enjoy it!
Thank you so much for this, you are a true Gentleman.
Hi Julius, Once you have completed your Blender plans, how do you export it to print. How do you adjust the size for printing it large? Adding the cut lines, etc?
Thank you for your great work! Very innovative!
there are covered on part 2 and 3 and you need Master membership to see them
It's all a bit confusing to me but I have saved it just so I can practice thank you my friend
Great work!
Thanks!
And I should also mention that thanks to you, one day we will be able to make the plane we want ourselves...
Titanic work! Thanks Julius
Thank you too!
Fokus ke proses design plans nya biarpun bingung bahasanya tapi betah nontonnya
Terima kasih
Great class, thanks for teaching us how to draw with Bender.
You're very welcome!
This is pure gold my friend!!! i will save it for the rest of my life. So many times i try to make my planes like this, but i allways have issues with the mirroring . I think i will have to give it some time to learn how to use this software.- Thanks a lot Julius!
Glad I could help!
Your videos are an inspiration!
Glad you like them!
Best tutorial ever.Thank you so much
Glad it was helpful!
have your done part II it would be nice you do what you promise to do thank you
Thank you very much for sharing your talents and knowledge. 🙏.
I could not find part 2 , can you please provide the link ?
Second question , do u have knowledge how to build the motor and remote control from scratch ?
I am really interested in that too
Design Tutorial part 2 is already released : exclusive to member ruclips.net/video/WvU86s3nWIs/видео.html
when will you release part 2? I'm looking forward to it
After the build and fly video of the model
When will you upload second parts..???
Brilliant, very informative giving an insight into this fascinating world of digital design.
I have learnt a huge amount from this Julius thank you for sharing.
Glad it was helpful!
Awesome video! Looking forward for part 2 :)
Will part 2 be free in the future? Thank you
Superb Julius! Thanks you so much! :):):)
Love your videos and cannot wait to see part two on how you translate it to the flattened plans.
Parabéns, Julius, ansioso por um novo modelo
Been waiting for this video, looks like quite a learning curve involved but I will have tutorial running on tablet as I work with blender on my laptop, time to get practicing, you've opened a whole new world of modeling, thank you so much Julius 👍👍👍
Hope you enjoy it!
You are a genius. Thank you!
Are the tutorial is same to other plane model, like your short video on modelling Yak trainer plane
Harika 2.Video yu 4 gözle bekliyorummmmm.....
Thanks for sharing the video...
I just found this, no notification!
I got Blender because I want to try this too. I am having to slow you down!
click the bell icon maybe, so you'll have notif in the future
You have helped me so much I was literally needing this! Thanks julius
Happy to help!
Good Video. Thank you Julius
Hebat! Terima kasih atas mengajarnya.
Forgot how fun Blender is. I've switched to Fusion 360, but may go back if printing plans and flattening is easy.
I use Blender just for modelling. It's free, so many can have it, but for converting to 2D plans I use Pepakura Designer, so it doesn't have to use Blender, in fact you can do this on any other 3D modelling software.
Parabéns. Compartilhando tanto conhecimento!!!!
Beautiful ! Thank you for showing us step by step, some of the steps seem too fast for us newbies sir.
you can pause it, reverse it and replay again
@@JuliusPerdana Oh yes I do that, but im super new to Blender thats the problem haha
For the side, top, and front views I like to create a bounding box that has this wingspan, length and height, then scale the view to fit the box.
Ur work is great
Very informative, I haven’t tried blender yet but plan too
Hope you enjoy
喜欢你的频道，向你学习
When are we doing it sir? Me and my friends are looking forward to the construction video of this plane.
Julian, thank you so much!
Do you design the spars and internal electronics inside of blender
Yes I do
Congrats ,Can you build Mitsubishi A6m Zero?
I can
@@JuliusPerdana great thank youu, I'll wait for that
You are great brother ❤️❤️❤️❤️
How do you calculate the location of wings?
Wow this is well done, and can we do the animation or simulation this model?
yes you can, many use it for animation. My approach on making this 3d model is as simple as possible, utilize flat surfaces as many possible for easier building with foam sheet, so for animation I think this model still too simple.
Great video !!!!! Thank you!!!
Glad you liked it!
@@JuliusPerdana the 2nd part???
Thank you🌹❤❤❤
You are so welcome
Mantap Om.
Very nice, I just finished my 750 and want to build an RC version.
Wow, that's fast
@@JuliusPerdana One thing on the flaperons, on the full scale they are in two sections and the out board section is up 3 degrees this allows the wing to be built flat with out wash out. And yes the horizontal is an upside down airfoil, when the airspeed drops below 35mph it takes every bit of it of elevator.
hey you might check out Herry's channel ruclips.net/channel/UCHWp4jixSuebMGx_kzYyj9A he built a Zenith 750 from scratch and is also in Indonesa about 2 hrs outside of Jakarta.
oh the real plane! wow amazing! Thanks for the tip, I think for small scale I can ignore that washout.
Very informative video, I love it
will the part 2 video be free for all ? anytime soon?
I tried to use the Blender Software, it is hard to make a model plane specially the cowling because of its curvature, how did you learned blender
Hello julius ,can i use the same set up but for 3D printed rc planes?
3D printed planes have different approach on the modelling method, this one cannot be use for 3D printing
@@JuliusPerdana ok ,but can I still use blender to create the rc plane and then bambu slicer to print ...or could you tell me how you do it ,or mabye you could make a video on how to ...etc .thankyou
yes you can, you also might want to install 3D Printer Plugins on your Blender so you can check your model 3d print friendly or not.
@@JuliusPerdana oh ok thanks for the advise
I really appreciate this video, thank you very much
You're very welcome!
Hey Julius. When will you carry on with the 747?
I always work on B747 in the background, there will be no more video until it fly, when? I don't know, when she's ready
@@JuliusPerdana ok awesome I can’t wait Julius! Thank you 🙏
Please show us the process of unwrap the 3d model and prepare for A4 size print! I have been following you since 2 years, already build so many models and I always write your name on my rc planes!
there are in 2 other parts (part 2&3) but you have to become a Master member to be able to see and watch it on RC Knowledge Playlist
How choice airfoil that perfect for rc plane on mass
I always use Clark Y airfoil for many of my planes, you can also modify it by squeezing or stretching that airfoil
Pak julius please teach us how to build plane using balsa and kevlar
Can u pls share plans with ur subscribers?!
Julius are this 2 programs free? I have been wanting to design and build an Airtractor 301. This video was very informative and a great step for start thinking about the build.
Yes they are
Lanjut part 2 nya donk pak Julius
Nice. Thanks.
how is the surface template plane in radio control aircraft çıkarılır.ve how can we transfer this to A0 paper format?
hai bro.. from malaysia here... can you made a Cessna Caravan? it would be nice.... much appreciated...
Sure I will
@@JuliusPerdana nice bro... I already made Berkik 3 its realy nice bro... Thank you for all the sharing...
Fantástic
thanks
Sensei!
do you use 3view drawing as i am have issue
yes of course
Titip sendal sebelum rame yang mana Gus Humaidi diberikan modal uang 50 jt untuk mengembangkan pesawat terbang yang katanya model pesawat nya dari channel RUclips ini.. Semoga mas Julius Perdana dilirik juga oleh Pak Erick Thohir agar semakin semangat mengembangkan apa yang sedang di kerjakan aamiin 🙏
hehehe terima kasih sudah mampir, gapapa sudah senang channel saya bisa berguna
amazing
Glad you think so!
Om emang Horizontal Stabilizer nya dia itu modelnya terbalik yah??
Iya yang super duty, ch705 dan ch701 tapi yg cruzer ngga pake
When will you upload second part????
this month
👏👏👏👏👏
Can you make Plane plant Avistar 30cc
Are you going to drop part 2? How can I convert my designed plane into a pdf plan and how do you simulate the planes to see if they fly
bro did you get how to do it
Hi Julius i have a question i am Bad at disyning plans ore build them with my Knife how dificould is it to make plans for the cnc machin for jou?
like balsa plans? more difficult than with foam
@@JuliusPerdana no a fome plane for the Laser guter ore cnc Maschine is it difikulter for jou to make those plans
When using scale tool how do you get it to stop at exactly what you want? It jumps too far either way!!
you need a good mouse pad hehehe
@@JuliusPerdana Very funny, but that's not what is the issue!