New to modding my 2018 WRX. Thought Subispeed had cheated me by sending the SF intake instead of the Big SF. Thanks for clearing up the difference. All the other install videos I've seen are for the Big SF.
I’m having problems.. I have check engine light and a bunch others.. I run a diagnostic and it tells me the car is too lean, or there is not enough air or fuel.. not sure what to do to solve this, any advice would help
I wanted to get the big SF for a good while now. In terms of sound spooling up and the bypass valve.. Is the big SF louder? being one long piece of intake piping, compared to the small sections combined with silicone?
How much power gains do you think you got from the tune and the intake? I installed the same intake and a Cobb turbo inlet on my 2018 WRX. And it feels like a 20 HP increase. But not sure.
@@cctrans29 I’d say it’s probably less…but it sounds cool. I installed all the Nexgen stage 2+ parts plus the turbo inlet and Bpv. I’ll be getting a tune within a month and will post a video w the results.
@@eyeout very nice. I ordered a Grimspeed TMIC, and 3 prong boost controller and a Cobb charge pipe. Getting tune when the parts are in. Running an OTS stage 1 plus for now. The intake is kinda driving my OCD nuts. It rattles a little to much. Trying to pin point what it is. Everything is nice and tight. Really scratching head.
Debating whether to go with this new SF intake. I had the Big SF and I would get a constant check engine light. Trying to see if all those issues are resolved
I haven’t had any stuttering or performance issues. The Big SF had issues. If you were to try and order a Big SF they would tell you that the SF is its replacement and they don’t sell the big anymore. In my opinion, if you own a big SF they should send you this one as a recall. Make sure you install the correct map or you will have issues.
i used to have the big sf intake too, it was awful had constant issues with fitment and vibration and messing up the maf sensor. I went with grimmspeed and just so much more straight forward and clean. This newer version looks great tho i wouldve totally went with this one
@@eyeout sweet ty for the quick reply, I've seen better reviews on this than the last gen big sf, feel like I can trust installing this on stage1+ with minimal reliability issues
@@noaheldridge2604 yup. Imma go stage 2 nexgen when Cobb ships out the intercooler. SF intake Cobb turbo inlet Cobb bpv Cobb charge pipe Cobb intercooler Cobb Boost controller After that I should be getting an invidia J pipe and r400 exhaust and a pro tune. Stay tuned for that!
I’d buy the accessport. I just ordered all the parts to go stage 2+ nexgen. I’ll use the off the shelf map until I get a J pipe and cat back with a pro tune. That way, when I need to pass smog I can go back to the stock exhaust and have the pro tune map on the accessport for later. Does he have proof of the pro tune? If not…I’d flash it to the Cobb stage 1 plus map.
@@colinmusgrave do a half way down acceleration in 2nd or 3rd gear. Any hesitations means it has an intake but no tune. Any smell when starting up like lean or rich is another clue.
@@mbbbb upon closer inspection…my issue might be due to a loose intake on the turbo inlet. 🥴 Replace your spark plugs while installing the intake. It requires you to remove the intake, so you might as well do it while you’re there.
@eyeout get an protune/etune with ethanol blend brother it will be a lot different. I only have cobb AP with E30 OTS from drunkmann tuning and it's a night and day difference
Just a nameless axle back muffler delete. It just makes noise.🤣 Going to install the entire Nexgen stage 2 package tomorrow! TMIC, BPV, turbo inlet, boost controller, charge pipe.
Just got mine and didn't even know there was a new revision. Gave myself a heart attack.... lol, thanks for the clarification.
New to modding my 2018 WRX. Thought Subispeed had cheated me by sending the SF intake instead of the Big SF. Thanks for clearing up the difference. All the other install videos I've seen are for the Big SF.
That’s why I made one. I’m not in it for the views or monetization. Check out the NexGen stage 2 video. Car sounds wicked awesome now.
That is some kick ass shifting
Thanks. I wasn’t trying to shift too fast so you could hear the BPV through the intake.
I have a cobb big sf intake and was wondering if you've had any problems running a cobb ots tune with a cobb after market intake?
I’ve been through one tank of gas and haven’t had issues yet. I had issues with the mishimoto intake on a plain stage one tune.
I’m having problems.. I have check engine light and a bunch others.. I run a diagnostic and it tells me the car is too lean, or there is not enough air or fuel.. not sure what to do to solve this, any advice would help
I wanted to get the big SF for a good while now. In terms of sound spooling up and the bypass valve.. Is the big SF louder? being one long piece of intake piping, compared to the small sections combined with silicone?
Probably sounds about the same. They don’t sell the big sf anymore because it caused issues.
How much power gains do you think you got from the tune and the intake? I installed the same intake and a Cobb turbo inlet on my 2018 WRX. And it feels like a 20 HP increase. But not sure.
@@cctrans29 I’d say it’s probably less…but it sounds cool.
I installed all the Nexgen stage 2+ parts plus the turbo inlet and Bpv. I’ll be getting a tune within a month and will post a video w the results.
@@eyeout very nice. I ordered a Grimspeed TMIC, and 3 prong boost controller and a Cobb charge pipe. Getting tune when the parts are in. Running an OTS stage 1 plus for now. The intake is kinda driving my OCD nuts. It rattles a little to much. Trying to pin point what it is. Everything is nice and tight. Really scratching head.
@@cctrans29 maybe it’s something else rattling and you’re just listening more because it sounds awesome.😎
@@eyeout I checked and it was in fact the intake box rattling against a bracket. Out came the grinder. Zero rattling noise now.
So I have a invidia N1 dual cat back I just kind of confused what mode I’m supposed to get I have a subi wrx 2018
whats the easiest way to get the MAF sensor out to clean?
Dude…you’re not going to like this.🤣
Jack the car up and go in from the bottom.😔
I wonder if you could pair this with the Tomie titanium pipe they just released not long ago so you can get some better whooshing noises
Nope. If you get that pipe you’ll need a pro tune. This one is just as loud as the mishimoto intake I had.
Debating whether to go with this new SF intake. I had the Big SF and I would get a constant check engine light. Trying to see if all those issues are resolved
I haven’t had any stuttering or performance issues. The Big SF had issues. If you were to try and order a Big SF they would tell you that the SF is its replacement and they don’t sell the big anymore. In my opinion, if you own a big SF they should send you this one as a recall. Make sure you install the correct map or you will have issues.
i used to have the big sf intake too, it was awful had constant issues with fitment and vibration and messing up the maf sensor. I went with grimmspeed and just so much more straight forward and clean. This newer version looks great tho i wouldve totally went with this one
Been a month and I have no issues.
@@eyeout that’s awesome looks like they did a really good job with that new version
I have the same issues.. what did you end up doing?
Will this pass emissions with the stage1+ tune? Jw, looking into getting this. Just ordered my ap and looking to get that extra bang for the buck
Yes, this part has a CARB # so it’s legal in all 50 states. Do not install this part without having the AP ready to install.
@@eyeout sweet ty for the quick reply, I've seen better reviews on this than the last gen big sf, feel like I can trust installing this on stage1+ with minimal reliability issues
@@noaheldridge2604 yup. Imma go stage 2 nexgen when Cobb ships out the intercooler.
SF intake
Cobb turbo inlet
Cobb bpv
Cobb charge pipe
Cobb intercooler
Cobb Boost controller
After that I should be getting an invidia J pipe and r400 exhaust and a pro tune. Stay tuned for that!
Thank you my dumbass has been running the wrong tune for months😅
Me and my boy got the same cold 😂
so im looking at a wrx and t has the sf intake and its tuned but no ap should I buy one
I’d buy the accessport.
I just ordered all the parts to go stage 2+ nexgen. I’ll use the off the shelf map until I get a J pipe and cat back with a pro tune.
That way, when I need to pass smog I can go back to the stock exhaust and have the pro tune map on the accessport for later.
Does he have proof of the pro tune? If not…I’d flash it to the Cobb stage 1 plus map.
@@eyeout idk im going to check it out tommorw to see its at the dealership
@@colinmusgrave do a half way down acceleration in 2nd or 3rd gear. Any hesitations means it has an intake but no tune. Any smell when starting up like lean or rich is another clue.
@@eyeout is there any other clues? likepsi?
@@eyeout i heardx the stock psi is 15.9 idk if thats true but if it goes higher does that mean its tuned also?
Are you running stock bpv?
I was, but in my latest video I upgraded it to the Cobb bpv along with the nexgen stage 2 package. Now the car sounds sick.
Oh man. So tempting. I was planning on getting the SF only.
So this intake is the newer version right? Is it reliable so far
@@mbbbb yes. I’m currently chasing some knock issues that are probably related to not having a pro tune. I’m doing the spark plugs plugs today.
@@mbbbb upon closer inspection…my issue might be due to a loose intake on the turbo inlet. 🥴
Replace your spark plugs while installing the intake. It requires you to remove the intake, so you might as well do it while you’re there.
@eyeout get an protune/etune with ethanol blend brother it will be a lot different. I only have cobb AP with E30 OTS from drunkmann tuning and it's a night and day difference
what exhaust u running?
Just a nameless axle back muffler delete. It just makes noise.🤣
Going to install the entire Nexgen stage 2 package tomorrow! TMIC, BPV, turbo inlet, boost controller, charge pipe.