3D One Review | FocusOnDetailing
HTML-код
- Опубликовано: 10 сен 2024
- #detailing #cars #review
In this video I delve into reviewing the very popular hybrid compound from 3D called One.
Using the VT commodore as the test car I try out how it performs using different pads from a true one step to a proper two step using just the one product to see if I can get the desired results.
The Commodore used is a rough car on its flat surfaces so I didn't expect much with removing serious damage like hard etching and gauges but as for the swirls, spider webbing, marring and fading. I was hoping that's where it could really show us how it performs.
On multiple panels I tried it to see if the results would differ and filmed the whole thing so sit back, relax and I hope you enjoy!
TAGS:
3D, car detailing, detailing, cars, One, review, how to, how, how-to, focusondetailing, focus on detailing, vt commodore, commodore, holden, results, cleaning, before and after, vlog, chat, canon90D, 90D, Canon, footage, polishing,
Used this stuff today for the first time and I really like it. Not only does it do a good job but it's very easy to work with and no dust.
I completely switched our shop over to 3D one & slowly but surely all of our chemicals will be 3D also. Great stuff!
Through 2020 I tested a ton of compounds and polishes at work. I used most of the top end offerings from Jescar, Sonax, Menzerna, etc, etc.
As of today I've either sold, or given away most of them. What remains is 3D - ACA500, One, ACA520, AAT502, Speed, and Optimum - Hyper Compound, Intensive Polish, Hyper Polish, and GPS.
I did keep Meguiar's and Menzerna because I've used them for so long.
Aside from the almost dustless nature of One, I love how far it stretches. After I load my pad (four drops) and complete the section, I can brush out the pad, and start with my next section without reloading. I can sometimes do that two or three sections until I need to reload with two small drops. This also makes for a very easy removal of the residue. I always account for the first initial section being a harder wipe off, but after that It's a breeze.
Moving to 3D abrasives liquids was a game changer for me. Every wish I ever had for a compound / polish was delivered by them. The only one I didn't really care for was AAT501 compound. I may hive it another shot though. I found it to really gum up my microfiber pads, and load them up really quickly. It also has a really off putting after scent.
Thanks for the detailed info 👍
Can you use 3D One Hybrid on glass (windshield) and car door pillars? I'm looking for an all in one compound/polish that can essentially do the entire vehicle.
Great review Tim!
I have been using 3D One for about 12months on all sorts of paints and is the best and most versatile stuff out there!
For heavy cutting I use the Rupes blue wool pad but also use shinemate yellow, blue and red pads with awesome results👍👍👍👍
Thanks mate! Must say it's a favourite of mine now for that very reason and I actually do need to buy some more as I write this comment 😅
Thanks for the support on the channel and other social media pages 👍👍
I too like the shinemate foam pads. The diamond pattern yellow, blue, and red. They seem to last a long time too.
That’s awesome for a 1 step great for mobile detailing guys
I've always been a Scholl S20 black user for my One Step.
But being mainly mobile the benefits of this are really intriguing me, I might just grab a bottle!
Great review mate, new Sub.
Well done mate. Seen a few vids of this polish via Apex Detail and it really goes well.
Thanks mate 👍👍
The "One" doesn't mean "one step" - it means "one polish". I.e - change the aggressiveness by changing the pad only - no need to change the polish.
Thanks for clarifying mate 👍👍
That's it!
What? I’ve never heard the term used that way and I been detailing 10 years. It’s always one pad one polish.
@@stevenwitte769there's a first time for everything, eh?
Interesting video! I got me a bottle and 2 packs of SPTA pads, 4" mf & wool and 5" foam. I'm going to use the product on my car with a large cup of coffee and see the results. The coffee is for me of course 😅
Thanks for the video mate!
I bought some last week and yes it outperformed my normal polish Sonax Perfect Finish mainly due to removal and a complete lack of dusting.
This stuff does seem quite popular for those exact reasons too 👍
3D one is perfect for white car paint
Hey Tim, how you doing? Love the video man 👍
Got some of that recently. Gonna try it on my sons beater Hyundai Elantra before I use it on my Acura.
Does this polish have fillers?
Do I need IPA after polishing before applying a paint sealer
Amazing video as always
Thanks mate
What pad was used and how big of a section did you work in? Are there any fillers ? How does it compare to a sonax perfect finish polish
Awesome results!
Cheers!
Also you don’t have to wipe just go straight into polishing step with the compound product on the paint
Can u do a review on graphine finish compared to ceramic coating. The 303 brand of graphene in particular
That would make for an interesting video and I've actually been wanting to trying it the new graphene spray from 303. Cheers!
I find it doesn’t fully remove light scratches
Hey legend how are you doing. I am actually looking at starting to do this myself now on the family cars
My guy sounds like the supercheap auto voice overs haha
I thought the same thing 🤣
Would you say that its best to use 2 separate polishes then? A cutting compound and a finishing one.
I'm also just think about what you said with the pads. I have a large circle polisher and I got some rougher almost microfiber pads for it and some fur like pads. Whitch of these would you use for the cutting and whitch one for the finishing?
Orange pad.