Great video! Very informative as always. I would love to be able to offer the same results as you, unfortunately i cant, because i dont do this for a living, so i dont have the tools and time to do the perfect job. In my area there arent many customers that would pay for something like that, they barely repair their cars, let alone take care of their paint. I bought a bottle of s20 black one step and a rotary polisher plus all the cleaning and preping materials, will do my best to get decent results for anyone who wants it.
S20 blck was originally made to work with a Rotary, I get great results even with my Rotary. The only issue would be finishing down with mininal holograms/buffing trails. My tip would be slow speeds & make sure you have a quality finishing pad.
Hi. Thank you again for your videos. Thanks to you I ordered Ewocar products. I love the heavy cut compound. But let me ask you What about the Ewocar Microfiber pad in this case?
in this case, because the coating on the car is not soft, and it is done step by step, microfiber is used because it will do a lot of things and will not leave traces
Ti bolje prestani da radiš one step poliranje na takvom nivou, niko više neće ni hteti dvoslojno. 😀 Verujem, da je i one step za mnoge ljude potpuno zadovoljavajući, posebno ako se dobro uradi. Pitanje odnosno tvoje mišljenje oko nanošenje paste na MF disk; vidim, da neki praktikuju da prvo utrljaju pastu u vlakna vrhovima prstiju, pa tek onda stave 4 do 5 kapi paste. Ti ne radiš tako?
I can't believe the end result. You're an amazing legend.
Tnx bro and enjoy
Great job, i'm from Brazil and i work with detail too, i like very much your vídeos.
Tnx my friend and enjoy
Your work is amazing. I'm impressed with the end result
Tnx bro and enjoy
Great video, I learned a lot from your videos. If it is possible I would like to see more details about the product you use.
you have on my channel about Ewocar products
Great video! Very informative as always. I would love to be able to offer the same results as you, unfortunately i cant, because i dont do this for a living, so i dont have the tools and time to do the perfect job. In my area there arent many customers that would pay for something like that, they barely repair their cars, let alone take care of their paint. I bought a bottle of s20 black one step and a rotary polisher plus all the cleaning and preping materials, will do my best to get decent results for anyone who wants it.
Keep on practicing and in the end you"ll getting better and better at it👍
S20 blck was originally made to work with a Rotary, I get great results even with my Rotary.
The only issue would be finishing down with mininal holograms/buffing trails. My tip would be slow speeds & make sure you have a quality finishing pad.
@@cheveresalvi rupes yellow waffle pad and 500-800max rpm. Must works well.
Very nice
Beautiful
Tnx
Your videos are great ..,my favorite part is when you throw in “What we do right here is go back!!!!!”......
Tnx bro
Have you tried using 2 dots of compound, and 2 dots of finish on 1 go..? Good or bad experience with the result..? Any tips?
No
Good job brow!
Tnx friend and enjoy
odličan
Hi. Thank you again for your videos. Thanks to you I ordered Ewocar products. I love the heavy cut compound. But let me ask you What about the Ewocar Microfiber pad in this case?
in this case, because the coating on the car is not soft, and it is done step by step, microfiber is used because it will do a lot of things and will not leave traces
In Uk one step is 30 40£ min per panel🤪😀good job like always 👌😀
Tnx bro
Bravo majstore, shto mislis spored tebe dali menzerna 2500 bi imala podobar efekt
Hvala probaj bitno je da pogodis kojim sundzeror,mf il vunom sa radis
How do you get so little haze with a 1 step on a microfiber pad? Cause usually microfiber pad needs a finishing step to reduse the haze
as said in the video without pressure
@@Amddetailing okay! Would you recommend 1 step polish with foam or microfiber? On hard paint like mercedez, audi or bmw
Υou are the master!
Tnx my friend and enjoy
Did u use the mictofibre cutting pad or finishing pqd ?
Finish pad
Its Megs DM'C'5 - microfibre cutting pad 5" ( 140mm ) .
Megs finishing mf is DM'F'5.
Majstore, hajd' nam napravi jedan edukativni video oko ovih kombinacija diskova i pasti. Kad biraš koji disk sa kojom pastom i zašto?
Where can i buy this polish heawy
You have a link in the video description
Nemas video kako radis dekontaminaciju prije poliranja.
Nemam
Prvo vodom saperes auto,onda operes aktivom pjenom onda hemisksa dek.pa rucna(glina) pa opet saperes auto
Bice video i o tome najvjerovatnije
Ti bolje prestani da radiš one step poliranje na takvom nivou, niko više neće ni hteti dvoslojno. 😀 Verujem, da je i one step za mnoge ljude potpuno zadovoljavajući, posebno ako se dobro uradi. Pitanje odnosno tvoje mišljenje oko nanošenje paste na MF disk; vidim, da neki praktikuju da prvo utrljaju pastu u vlakna vrhovima prstiju, pa tek onda stave 4 do 5 kapi paste. Ti ne radiš tako?
To sr tako radi kad je nova spuzva,mf,vuna nebitno poslije nema potrebe za tim jer se samo puni disk pastom znaci samo lad je disk nov to se radi tako
Harikasın 🇹🇷
3d one is way better
You really waste a lot of time talking useless stuff which most people already know get on with the show.